There are two ways to separate multiple files in XKB include statements:
'+' will cause the later file to override the first in case of conflict,
while '|' will cause it augment it (this is done by xkbcomp). '!' is
unrelated here.
Since '|' is practically never used, this wasn't noticed.
In the modified test, the '|some_compat' previously was just ignored.
Signed-off-by: Ran Benita <ran234@gmail.com>
The format of the include statment is not explained anywhere, the code
is confusing and the comments misleading. Try to explain it better.
Signed-off-by: Ran Benita <ran234@gmail.com>
Avoids a warning, from xkeyboard-config:
commit 6676053f2c93596c2aaa9905151a5c76355a1540
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Fri Jun 29 09:53:45 2012 +1000
symbols: keypad can only have one default section
Warning: Multiple default components in keypad
Using x11, ignoring pointerkeys
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ran Benita <ran234@gmail.com>
For some reason this piece of code wasn't copied from xkbcomp, which
causes all of the warnings like these:
Warning: No map in include statement, but "pc" contains several; Using first defined map, "pc105"
Signed-off-by: Ran Benita <ran234@gmail.com>
This way the test logs have all the information, but we don't get eye
bleed every time we run them manually. One can always use
TESTS_ENVIRONMENT (we correctly use AM_TESTS_ENVIRONMENT now), or set
the envvars from the shell.
Signed-off-by: Ran Benita <ran234@gmail.com>
Now that we don't use syslog, "level" does sound more commonplace. We
should change it while there is still nobody using it.
Also leave some space between the integers of the xkb_log_level enum
values, if we ever need to shove more in between.
Signed-off-by: Ran Benita <ran234@gmail.com>
The implementation of changing the default properties of actions, e.g. a
statements such as (from test/data/compat/basic):
setMods.clearLocks= True;
latchMods.clearLocks= True;
latchMods.latchToLock= True;
works by keeping a list of ActionInfo's, each containing the neccesary
info from each statement, and then when some action comes up (e.g. in an
interpret statment) it goes through the list, and applies the relevent
ActionInfo's to the newly-constructed xkb_action.
Instead of doing this, we add a struct ActionsInfo, which contains an
array of xkb_actions, one for each type. When a default changing
statement appears, we change the action in the array; when a new action
comes up, we just copy from the array. This is simpler to figure out,
and pretty straightforward.
Signed-off-by: Ran Benita <ran234@gmail.com>
Currently where it is possible to write:
setMods.clearLocks = True;
It's also possible to write:
action.clearLocks = True;
This will set the default value for the clearLocks action field for
*all* action types, as opposed to just setMods in this case. If
subsequently an action is used for which this field does not make sense,
it will error out.
This doesn't make any sense, because any given field is only possible by at
most 3 or 4 action types... which you might as well write explicitly and
avoid the side effect mentioned above.
Needless to say this is one of xkbcomp's "hidden features" and is not
used anywhere; remove it.
Signed-off-by: Ran Benita <ran234@gmail.com>
Add CompileKeymap to do most of what compile_keymap_file does now, and
move UpdateKeymapFromModifiers along with it from (mostly unrelated)
compat.c.
Also rename UpdateKeymapFromModifiers to UpdateDerivedKeymapFields,
because it does more than update the modifiers.
Signed-off-by: Ran Benita <ran234@gmail.com>
We make the xkb_file_type enum sequential instead of masks, and then
we don't have to repeat the file types several times in the function.
Makes the code cleaner.
Signed-off-by: Ran Benita <ran234@gmail.com>
This function was always returning -1.
Adding a test, we see that test/state.c treat the is_active functions as
returning booleans, which would treat -1 as success, so we test for > 0
instead (most users would probably get this wrong as well...).
Also update the documentation for the are_active functions, and add a
ATTR_NULL_SENTINEL for gcc __attribute__((sentinel)).
Signed-off-by: Ran Benita <ran234@gmail.com>
For the indicator to be set, it is sufficient for at least one of the
group, modifier, or control state to match; this is in line with the
xkblib spec, section 8.2 and ComputeAutoState() in xserver/xkb/xkbLEDs.c
(though the xserver implementation differs from the spec on some
points...).
This also adds a tiny optimization to skip the entire check if the mask
is empty.
Signed-off-by: Ran Benita <ran234@gmail.com>
This is only relevant to the virtualModifier= statement in interpret
statements in xkb_compat. The current code allows to write e.g.
virtualModifier = 4
to get the virtual modifier whose index happens to be 4 (possibly
declared in other files or sections, i.e. xkb_types). Doing this is
undeterministic, will break without notice, and not used anywhere.
Don't allow it.
Signed-off-by: Ran Benita <ran234@gmail.com>
The current code supports statements such as:
virtual_modifiers NumLock = Mod2;
This would set the mapping from the NumLock vmod to the Mod2 real mod
directly, without going through the virtualModifier field in an
interpret statement (in xkb_compat) or vmods field in a key statement
(in xkb_symbols).
This is undocumented, unused and complicates things, so remove it.
Signed-off-by: Ran Benita <ran234@gmail.com>
It's currently possible to write something like this:
interpret Num_Lock+Any {
virtualModifier = NumLock;
action = LockMods(modifiers=NumLock);
!indicator.allowExplicit;
};
The final statement has the same effect as writing it in the global file
scope, which changes the default indicator (which all subsequent
indicators start off as). This very strange and also unused; if someone
does it he probably expects it to affect only the local scope, and he
might then get unexpected behavior. So don't allow it.
Also, HandleInterpVar is clearly a misnomer (as it can also change
indicator defaults) so rename it.
Signed-off-by: Ran Benita <ran234@gmail.com>
Using !allowExplicit sets the XkbIM_NoExplicit flag of the indicator,
which means that an XKB client cannot change the state of the indicator
using e.g. XkbSetNamedIndicator().
We do not support changing the state of an indicator; furthermore doing
it is probably only useful in conjunction with led-drives-keyboard
behavior, which we also do not support. This is because setting an
indicator without led-drives-keyboard would make the indicator and the
modifier/group it's bound to to get out of sync.
We can re-add this if we need this info.
Signed-off-by: Ran Benita <ran234@gmail.com>
We don't support it, as mentioned in the README, so we should stop
processing it and print a message about it.
Signed-off-by: Ran Benita <ran234@gmail.com>
Group compatibility statements are like the following:
group 3 = AltGr;
This currently results in:
keymap->groups[2].mask = <real mod mapped from AltGr vmod>
And we don't do any thing with this value later. The reason it exists in
XKB is to support non-XKB clients (i.e. XKB support disabled entirely in
the server), which do not know the concept of "group", and use some
modifier to distinguish between the first and second keyboard layouts
(usually with the AltGr key). We don't care about all of that, so we can
forget about it.
One artifact of this removal is that xkb_map_num_groups no longer
works, because it counted through keymap->groups (this wasn't entirely
correct BTW). Instead we add a new num_groups member to the keymap,
which just hold the maximum among the xkb_key's num_groups. This also
means we don't have to compute anything just to get the number of
groups.
Signed-off-by: Ran Benita <ran234@gmail.com>
Now that 1fba6189e67 removed support for binding indicator maps by index
instead of name, we can remove some more magic which happens now: if an
indicator map specifies an indicator name which was not previously
declared in a 'indicator 5 = "Caps Lock"'-like statement in
xkb_keycodes, we can just look at the next free index and assign it.
This also allows us to use a darray for the LEDInfo's instead of a list.
Signed-off-by: Ran Benita <ran234@gmail.com>
Ran Benita