There are two ways to separate multiple files in XKB include statements:
'+' will cause the later file to override the first in case of conflict,
while '|' will cause it augment it (this is done by xkbcomp). '!' is
unrelated here.
Since '|' is practically never used, this wasn't noticed.
In the modified test, the '|some_compat' previously was just ignored.
Signed-off-by: Ran Benita <ran234@gmail.com>
Avoids a warning, from xkeyboard-config:
commit 6676053f2c93596c2aaa9905151a5c76355a1540
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Fri Jun 29 09:53:45 2012 +1000
symbols: keypad can only have one default section
Warning: Multiple default components in keypad
Using x11, ignoring pointerkeys
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Ran Benita <ran234@gmail.com>
This way the test logs have all the information, but we don't get eye
bleed every time we run them manually. One can always use
TESTS_ENVIRONMENT (we correctly use AM_TESTS_ENVIRONMENT now), or set
the envvars from the shell.
Signed-off-by: Ran Benita <ran234@gmail.com>
Now that we don't use syslog, "level" does sound more commonplace. We
should change it while there is still nobody using it.
Also leave some space between the integers of the xkb_log_level enum
values, if we ever need to shove more in between.
Signed-off-by: Ran Benita <ran234@gmail.com>
This function was always returning -1.
Adding a test, we see that test/state.c treat the is_active functions as
returning booleans, which would treat -1 as success, so we test for > 0
instead (most users would probably get this wrong as well...).
Also update the documentation for the are_active functions, and add a
ATTR_NULL_SENTINEL for gcc __attribute__((sentinel)).
Signed-off-by: Ran Benita <ran234@gmail.com>
Group compatibility statements are like the following:
group 3 = AltGr;
This currently results in:
keymap->groups[2].mask = <real mod mapped from AltGr vmod>
And we don't do any thing with this value later. The reason it exists in
XKB is to support non-XKB clients (i.e. XKB support disabled entirely in
the server), which do not know the concept of "group", and use some
modifier to distinguish between the first and second keyboard layouts
(usually with the AltGr key). We don't care about all of that, so we can
forget about it.
One artifact of this removal is that xkb_map_num_groups no longer
works, because it counted through keymap->groups (this wasn't entirely
correct BTW). Instead we add a new num_groups member to the keymap,
which just hold the maximum among the xkb_key's num_groups. This also
means we don't have to compute anything just to get the number of
groups.
Signed-off-by: Ran Benita <ran234@gmail.com>
This field is used in conjunction with key behaviors, which we don't
support since c1ea23da5. This is also unused in xkeyboard-config.
Signed-off-by: Ran Benita <ran234@gmail.com>
Since we now handle empty model/layout, the last couple of tests should
not fail. The reason they do is bacause they try to use a non-existent
"base" rules file. When the file is brought in these tests do not fail.
Since we already test for non-existent rules file, we can remove them,
and refine the other tests a bit.
Signed-off-by: Ran Benita <ran234@gmail.com>
Various non-functional changes:
- Re-add keycodes.h and move some stuff there.
- Add parser-priv.h for internal bison/flex stuff.
- Don't include headers from other headers, such that file dependencies
are immediate in each file.
- Rename xkbcomp.h -> ast.h, parseutils.{c,h} -> ast-build.{c,h}
- Rename path.{c,h} -> include.{c,h}
- Rename keytypes.c -> types.c
- Make the naming of XkbFile-related functions more consistent.
- Move xkb_map_{new,ref,unref} to map.c.
- Remove most extern keyword from function declarations, it's just
noise (XKB_EXPORT is what's important here).
- Append XKBCOMP_ to include guards.
- Shuffle some code around to make all of this work.
Splitting this would be a headache..
Signed-off-by: Ran Benita <ran234@gmail.com>
A fairly simple helper which, given an xkb_mod_mask_t, removes all
modifiers which are consumed during processing of a particular key.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Recreate the old test/dump scenario, where we test the following map:
- rules: evdev
- model: pc104
- layout #1: us
- layout #2: ru
- layout #3: ca(multix)
- layout #4: de(neo)
This is ever so slightly altered from the xkbcomp output; running the
following:
setxkbmap -rules evdev -model pc105 -layout us,ru,ca,de -variant
,,multix,neo -print | xkbcomp -xkb - -
will give you a map with RCTL added to the modifier_map for both Control
and Mod3. Running the output through xkbcomp -xkb - - again, will give
you RCTL only added to Mod3.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
As a map will implicitly go to level one unless explicitly mentioned
otherwise, remove all explicit =Level1 mappings, except for those with
preserve entries.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Bring the input file into line with recent changes to the dump output,
so we're as close as we can get to a round trip.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Right now it just comes from build-time, but eventually this should be
sourced from configuration files at runtime too.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Currently the user has no way of knowing which of the active modifiers
have been used in the translation of a keycode to its keysyms. The use
case is described in the GTK docs: say there's a menu accelerator
activated by "<Alt>+". Some layouts have "+" shifted, and some have it
on the first level. So in keymaps where "+" is shifted, the Shift
modifier is consumed and must be ignored when the user is testing
for "<Alt>+". Otherwise, we may get "<Alt><Shift>+" and the accelerator
should not actually fire.
For this we also use the preserve[] information in the key types, which
can forces us to report modifiers as unconsumed even if they were used
in the translation. Until now we didn't do anything with this
information.
The API tries to match its surronding. It's not very efficient but this
can be fixed.
Signed-off-by: Ran Benita <ran234@gmail.com>
If there is no map entry for some modifier combination, the default is
to use level 1. The removed code is an optimization to save some space
by removing these entries. But it doesn't actually save any space, and
did not in fact remove all level 1 entries (it walks the array while
modifying it so there's an off-by-one error).
We can instead keep them in the types but just not print them in
keymap-dump.c, to get about the same behavior.
Signed-off-by: Ran Benita <ran234@gmail.com>
Xkb required every keymap to have at least the four following canonical
types: ONE_LEVEL, TWO_LEVEL, ALPHABETIC, KEYPAD. This is specified in
e.g. the kbproto spec and XkbKeyTypesForCoreSymbols(3) man page.
If these types are not specified in the keymap, the code specifically
checks for them and adds them to the 4 first places in the types array,
such that they exist in every keymap. These are also the types (along
with some non-required 4-level ones) that are automatically assigned to
keys which do not explicitly declare a type (see FindAutomaticType in
symbols.c, this commit doesn't touch these heuristics, whcih are also not
very nice but necessary).
The xkeyboard-config does not rely on the builtin xkbcomp definitions of
these types and does specify them explicitly, in types/basic and
types/numpad, which are virtually always included.
This commit removes the special behavior:
- The code is ugly and makes keytypes.c harder to read.
- The code practically never gets run - everyone who uses
xkeyboard-config or a keymap based upon it (i.e. everyone) doesn't need
it. So it doesn't get tested.
- It mixes policy with implementation for not very good reasons, it
seems mostly for default compatibility with X11 core.
- And of course we don't need to remain compatible with Xkb ABI neither.
Instead, if we read a keymap with no types specified at all, we simply
assign all keys a default one-level type (like ONE_LEVEL), and issue
plenty of warnings to make it clear (with verbosity >= 3). Note that
this default can actually be changed from within the keymap, by writing
something like
type.modifier = Shift
type.whatever_field = value
in the top level of the xkb_types section. (This functionality is
completely unused as well today, BTW, but makes some sense).
This change means that if someone writes a keymap from scratch and
doesn't add say ALPHABETIC, then something like <AE11> = { [ q Q ]; }; will
ignore the second level. But as stated above this should never happen.
Signed-off-by: Ran Benita <ran234@gmail.com>
The program reads key events from evdev input devices, puts them through
the library and prints some information about them. It's nice for
experimenting, quick testing and trying to break it with random stuff
(already found some!).
It is called "interactive" for lack of a better name. It's a bit
hackish, but can easily be extended, made more portable etc, in the
future.
Signed-off-by: Ran Benita <ran234@gmail.com>
Conflicts:
Makefile.am
test/.gitignore
It's more tidy and less error prone, since we use strcasecmp == 0 a lot.
We replace strcmp == 0 by streq, strcasecmp == 0 by istreq,
uStrCasePrefix by istreq_prefix and uDupString by strdup_safe.
Signed-off-by: Ran Benita <ran234@gmail.com>
.uncrustify.cfg committed for future reference also, but had to manually
fix up a few things: it really likes justifying struct initialisers.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
commit 46441b1184 removed this from the
public API, and we don't need it internally. So send it to the archives.
Signed-off-by: Ran Benita <ran234@gmail.com>
We'd accidentally inverted silent vs. non-silent compilation, which
would skew the benchmark pretty badly, but also forgot to change base to
evdev for the rules here.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Readd the component names to the keymap->names struct. This is used when
printing the component, e.g.
xkb_keymap {
xkb_keycodes "evdev+aliases(qwerty)" {
instead of
xkb_keymap {
xkb_keycodes {
This makes diffing against xkbcomp $DISPLAY a bit easier and is kind of
useful anyway.
Signed-off-by: Ran Benita <ran234@gmail.com>
The code used to match a keysym to a keycode (see added comment)
differed in behavior from xkbcomp, always taking the first key it found.
This caused some incorrect interpretation of the xkeyboard-config data,
for example the one corrected in dump.data (see the diff): since the
de-neo layout sets the both_capslock option, the Left Shift key (LFSH)
has the Caps_Lock keysym in group 4 level 2; now since
keycode(Left Shift) = 50 < keycode(Caps Lock) = 64
the Left Shift one was picked, instead of the Caps Lock one which is
group 1 level 1. The correct behavior is to pick according to group,
level, keycode.
Signed-off-by: Ran Benita <ran234@gmail.com>
Ran Benita
Daniel Stone