This commit fixes the incorrect current behavior, where at the end of the
following key sequence
Left Shift down, Right Shift down, Left Shift up
the Shift modifier is cleared.
Clearly the code is not as nice as before, but it seems like some count
of the depressed modifiers must be kept.
The code is lifted mostly as is from xkbActions.c. [ There they also
assign to setMods and clearMods each time and not OR it. I assume its
correct, although I wouldn't have guessed... ]
Signed-off-by: Ran Benita <ran234@gmail.com>
This commit removes the ability to specify a keymap *in a rules file*,
e.g. in /usr/share/X11/xkb/rules/evdev or somesuch. This is unused in
xkeyboard-data, and the current code has never even supported it,
because xkb_map_new_from_kccgst (which is no longer exposed in the API)
checks to see that one of the usual components (e.g. symbols, types, ..)
has been filled, while the rules parser, on the other hand, doesn't
allow to specify a keymap and other stuff at the same time.
( The idea was to remove xkb_map_new_from_kccgst entirely, but it's used
by a test so it can stay. )
tl;dr: dead code. Of course passing a keymap file to
xkb_map_new_from_file still works.
Signed-off-by: Ran Benita <ran234@gmail.com>
compile_keymap can only be passes a single keymap file now, from all
code paths leading to it. So this function doesn't do anything.
The remaining check is performed inside CompileKeymap, so we can remove
it as well; compile_keymap doesn't do much now.
Signed-off-by: Ran Benita <ran234@gmail.com>
It seems like at some point it was needed to break the abstraction and
perform this piece of code in the context above CompileCompatMap. The
extra argument and the typedef look strange now, and doesn't seem to be
needed any more, so move them back.
Signed-off-by: Ran Benita <ran234@gmail.com>
enums are nice for some type safety and readability. This one also
removes the distinction between file type mask / file type index and
some naming consistency.
Signed-off-by: Ran Benita <ran234@gmail.com>
If we've only derived that a key should repeat, rather than had it
explicitly specified, don't set the explicit member. Fixes the dump
test.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
An entry for a type will only get marked as active if a virtual modifier
can be directly mapped to it, and not if an action indirectly leads to
it (e.g. LevelThree). We don't really need this test since entries which
can never be triggered ... won't be triggered.
The entire map->active thing should probably just go away.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Our early exit in ApplyInterpsToKey meant we weren't hitting the code
that's supposed to set a sensible default autorepeat value for most
keys.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
This test verifies the core purpose of this library, which is to
translate the user's keypresses into keysyms according to the keymap and
the XKB specification.
The tests emulate a series of key presses, and checks that the resulting
keysyms are what we expect.
Several of the tests currently fail, and plenty more should be added and
maybe split up.
It also currently uses an RMLVO keymap, which comes from the
xkeyboard-config data set, and whose behaviour may change in the future.
So it should probably be changed to use several files of our own, but
it's OK for now.
Signed-off-by: Ran Benita <ran234@gmail.com>
For the darray we need to specify the explicit struct xkb_filter type
instead of void*, so we move the definition of struct xkb_state into
state.c thus making it opaque even from the rest of the files. It has
enough getters to get going and is otherwise good style.
Signed-off-by: Ran Benita <ran234@gmail.com>
The arrays found in KeyInfo are by far the most complicated, so this is
taken one member at a time so as not to break anything.
Signed-off-by: Ran Benita <ran234@gmail.com>
- Make darray_free also initialize the array back to an empty state, and
stop worrying about it everywhere.
- Add darray_mem, to access the underlying memory, which we do manually
now using &darray_item(arr, 0). This makes a bit more clear when we
actually mean to take the address of a specific item.
- Add darray_copy, to make a deep copy of a darray.
- Add darray_same, to test whether two darrays have the same underlying
memory (e.g. if the struct itself was value copied). This should used
where previously two arrays were compared for pointer equality.
Signed-off-by: Ran Benita <ran234@gmail.com>
Here are some quick numbers from valgrind, running rulescomp only with a
simple, common "us,de" rule set:
before darray: cb047bb
total heap usage: 44,924 allocs, 44,924 frees, 3,162,342 bytes allocated
after darray: c87468e
total heap usage: 52,670 allocs, 52,670 frees, 2,844,517 bytes allocated
tweaking specific inital allocation sizes:
total heap usage: 52,652 allocs, 52,652 frees, 2,841,814 bytes allocated
changing initial alloc = 2 globally
total heap usage: 47,802 allocs, 47,802 frees, 2,833,614 bytes allocated
changing initial alloc = 3 globally
total heap usage: 47,346 allocs, 47,346 frees, 3,307,110 bytes allocated
changing initial alloc = 4 globally
total heap usage: 44,643 allocs, 44,643 frees, 2,853,646 bytes allocated
[ Changing the geometric progression constant from 2 only made things
worse. I tried the golden ratio - not so golden :) ]
The last one is obviously the best, so it was chosen, with the specific
tweaks thrown in as well (these were there before but don't make much
difference). Overall it seems to do better than the previous manual
allocations which is a bit surprising.
Signed-off-by: Ran Benita <ran234@gmail.com>
These were made const when the structs were exposed in the API. Now they
are private and we shouldn't mess around with the UNCONSTIFY business.
Signed-off-by: Ran Benita <ran234@gmail.com>
Since every user building the library, even from git, doesn't need these
files anymore, there's no need to check for them (this goes for makekeys
as well).
The only remaining user is the update-keysyms target, but whoever will
run it again (if ever) will probably know what he's doing (at least
enough to run git diff before git commit). And the defaults should be
fine too.
Signed-off-by: Ran Benita <ran234@gmail.com>
This avoids a couple of special cases in the code, and is more
consistent. Since anyone who includes xkbcommon.h also gets
xkbcommon-keysyms.h, and anyone who include xkbcommon-keysyms.h would
want NoSymbol anyway, there's no down side.
Signed-off-by: Ran Benita <ran234@gmail.com>
This code uses a table and code derived from
http://www.cl.cam.ac.uk/~mgk25/ucs/keysym2ucs.c
The added API calls are:
xkb_keysym_to_utf32
xkb_keysym_to_utf8
[daniels: Changed API to be more in line with keysym_get_name, added
test, changed formatting to 4-space.]
If we can merge cleanly (i.e. use the entirety of one entry rather than
having to go level by level), then just reuse the existing symbols array
and skip the entire merge process.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
bison/flex-generated objects, when being run in a VPATH build with
--disable-dependency-tracking (i.e. Gentoo), would fail to be created
because automake didn't bother creating the destination directories
before trying to create the objects.
Fix this by depending on the destination directory stamp, which
according to the automake mailing list, should hopefully remain fairly
stable.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Add a test/dump.data file which contains the result we're expecting from
xkb_map_get_as_string run on a particularly complex set of keymaps, and
assert that the string representations are the same. This means that
any updates to xkb_map_get_as_string will also need to update the test
data, but should also ensure that we don't have any more parser
regressions.
Compared with diff to the output of setxkbmap + xkbcomp for the same
keymap; seems completely solid.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
A symbols file may contain a global, non key specific setting for
the group out-of-range handling method (wrap, clamp, redirect). Only
that:
* Its parsed and kept in the SymbolsInfo, but is not otherwise used in
any way (it's the same in the real xkbcomp).
* It's not used in any of xkeyboard-config files.
* It's not mentioned in the xkb specs (only the per-key ones).
* It doesn't make much sense anyway.
So remove the struct field, and emit an "unsupported, ignored" warning.
We don't increment the error count because of it, just continue (the
radio group warning just below is changed to do the same - there's no
reason to possibly abort the entire thing for it).
Signed-off-by: Ran Benita <ran234@gmail.com>
Conflicts:
src/xkbcomp/symbols.c
Instead of using NoSymbol in the map, we use num_syms == 0 to signify
the non-presence of a symbol. So instead of adding NoSymbol mappings
to the list regardless, detect them and set num_syms == 0.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The failure mode here is a little irritating:
- server loads map with ISO_Lock action
- server dumps keymap to string, including:
interpret ISO_Lock+AnyOfOrAll(None) {
action= NoAction();
};
as we don't (yet) print ISO_Lock actions
- client parses keymap from string
- client dumps keymap to string, including:
interpret ISO_Lock+AnyOfOrAll(None) {
};
- this results in a syntax error
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Ran Benita
Daniel Stone
Rob Bradford