SDL/test/checkkeysthreads.c

309 lines
8.1 KiB
C
Raw Normal View History

Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
/*
2023-01-09 10:41:41 -07:00
Copyright (C) 1997-2023 Sam Lantinga <slouken@libsdl.org>
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely.
*/
/* Simple program: Loop, watching keystrokes
Note that you need to call SDL_PollEvent() or SDL_WaitEvent() to
pump the event loop and catch keystrokes.
*/
#include <stdio.h>
#include <stdlib.h>
#ifdef __EMSCRIPTEN__
#include <emscripten/emscripten.h>
#endif
#include <SDL3/SDL.h>
#include <SDL3/SDL_main.h>
#include <SDL3/SDL_test.h>
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
static int done;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
/* Call this instead of exit(), so we can clean up SDL: atexit() is evil. */
static void
quit(int rc)
{
SDL_Quit();
exit(rc);
}
static void
print_string(char **text, size_t *maxlen, const char *fmt, ...)
{
int len;
va_list ap;
va_start(ap, fmt);
len = SDL_vsnprintf(*text, *maxlen, fmt, ap);
if (len > 0) {
*text += len;
if (((size_t)len) < *maxlen) {
*maxlen -= (size_t)len;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
} else {
*maxlen = 0;
}
}
va_end(ap);
}
static void
print_modifiers(char **text, size_t *maxlen)
{
int mod;
print_string(text, maxlen, " modifiers:");
mod = SDL_GetModState();
if (!mod) {
print_string(text, maxlen, " (none)");
return;
}
if (mod & SDL_KMOD_LSHIFT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " LSHIFT");
}
if (mod & SDL_KMOD_RSHIFT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " RSHIFT");
}
if (mod & SDL_KMOD_LCTRL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " LCTRL");
}
if (mod & SDL_KMOD_RCTRL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " RCTRL");
}
if (mod & SDL_KMOD_LALT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " LALT");
}
if (mod & SDL_KMOD_RALT) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " RALT");
}
if (mod & SDL_KMOD_LGUI) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " LGUI");
}
if (mod & SDL_KMOD_RGUI) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " RGUI");
}
if (mod & SDL_KMOD_NUM) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " NUM");
}
if (mod & SDL_KMOD_CAPS) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " CAPS");
}
if (mod & SDL_KMOD_MODE) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
print_string(text, maxlen, " MODE");
}
if (mod & SDL_KMOD_SCROLL) {
print_string(text, maxlen, " SCROLL");
}
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
}
static void
PrintModifierState(void)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
{
char message[512];
char *spot;
size_t left;
spot = message;
left = sizeof(message);
print_modifiers(&spot, &left);
SDL_Log("Initial state:%s\n", message);
}
static void
PrintKey(SDL_Keysym *sym, SDL_bool pressed, SDL_bool repeat)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
{
char message[512];
char *spot;
size_t left;
spot = message;
left = sizeof(message);
/* Print the keycode, name and state */
if (sym->sym) {
print_string(&spot, &left,
"Key %s: scancode %d = %s, keycode 0x%08X = %s ",
pressed ? "pressed " : "released",
sym->scancode,
SDL_GetScancodeName(sym->scancode),
sym->sym, SDL_GetKeyName(sym->sym));
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
} else {
print_string(&spot, &left,
"Unknown Key (scancode %d = %s) %s ",
sym->scancode,
SDL_GetScancodeName(sym->scancode),
pressed ? "pressed " : "released");
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
}
print_modifiers(&spot, &left);
if (repeat) {
print_string(&spot, &left, " (repeat)");
}
SDL_Log("%s\n", message);
}
static void
2021-11-19 15:02:02 -07:00
PrintText(const char *eventtype, const char *text)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
{
2021-11-19 15:02:02 -07:00
const char *spot;
char expanded[1024];
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
expanded[0] = '\0';
for (spot = text; *spot; ++spot) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
size_t length = SDL_strlen(expanded);
(void)SDL_snprintf(expanded + length, sizeof(expanded) - length, "\\x%.2x", (unsigned char)*spot);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
}
SDL_Log("%s Text (%s): \"%s%s\"\n", eventtype, expanded, *text == '"' ? "\\" : "", text);
}
static void loop(void)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
{
SDL_Event event;
/* Check for events */
/*SDL_WaitEvent(&event); emscripten does not like waiting*/
2022-12-01 14:07:03 -07:00
(void)fprintf(stderr, "starting loop\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
// while (SDL_PollEvent(&event)) {
while (!done && SDL_WaitEvent(&event)) {
2022-12-01 14:07:03 -07:00
SDL_Log("Got event type: %" SDL_PRIu32 "\n", event.type);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
switch (event.type) {
case SDL_EVENT_KEY_DOWN:
case SDL_EVENT_KEY_UP:
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
PrintKey(&event.key.keysym, (event.key.state == SDL_PRESSED) ? SDL_TRUE : SDL_FALSE, (event.key.repeat) ? SDL_TRUE : SDL_FALSE);
break;
case SDL_EVENT_TEXT_EDITING:
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
PrintText("EDIT", event.text.text);
break;
case SDL_EVENT_TEXT_INPUT:
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
PrintText("INPUT", event.text.text);
break;
case SDL_EVENT_MOUSE_BUTTON_DOWN:
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
/* Left button quits the app, other buttons toggles text input */
2022-12-01 14:07:03 -07:00
(void)fprintf(stderr, "mouse button down button: %d (LEFT=%d)\n", event.button.button, SDL_BUTTON_LEFT);
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
if (event.button.button == SDL_BUTTON_LEFT) {
done = 1;
} else {
if (SDL_TextInputActive()) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
SDL_Log("Stopping text input\n");
SDL_StopTextInput();
} else {
SDL_Log("Starting text input\n");
SDL_StartTextInput();
}
}
break;
case SDL_EVENT_QUIT:
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
done = 1;
break;
default:
break;
}
2022-12-01 14:07:03 -07:00
(void)fprintf(stderr, "waiting new event\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
}
2022-12-01 14:07:03 -07:00
(void)fprintf(stderr, "exiting event loop\n");
(void)fflush(stderr);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
#ifdef __EMSCRIPTEN__
if (done) {
emscripten_cancel_main_loop();
}
#endif
}
/* Very simple thread - counts 0 to 9 delaying 50ms between increments */
static int SDLCALL ping_thread(void *ptr)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
{
int cnt;
SDL_Event sdlevent;
SDL_memset(&sdlevent, 0, sizeof(SDL_Event));
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
for (cnt = 0; cnt < 10; ++cnt) {
2022-12-01 14:07:03 -07:00
(void)fprintf(stderr, "sending event (%d/%d) from thread.\n", cnt + 1, 10);
(void)fflush(stderr);
sdlevent.type = SDL_EVENT_KEY_DOWN;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
sdlevent.key.keysym.sym = SDLK_1;
SDL_PushEvent(&sdlevent);
SDL_Delay(1000 + rand() % 1000);
}
return cnt;
}
int main(int argc, char *argv[])
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
{
SDL_Window *window;
SDL_Renderer *renderer;
SDL_Thread *thread;
SDLTest_CommonState *state;
/* Initialize test framework */
state = SDLTest_CommonCreateState(argv, 0);
if (state == NULL) {
return 1;
}
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
/* Enable standard application logging */
SDL_LogSetPriority(SDL_LOG_CATEGORY_APPLICATION, SDL_LOG_PRIORITY_INFO);
/* Parse commandline */
if (!SDLTest_CommonDefaultArgs(state, argc, argv)) {
return 1;
}
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
/* Initialize SDL */
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't initialize SDL: %s\n", SDL_GetError());
return 1;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
}
/* Set 640x480 video mode */
window = SDL_CreateWindow("CheckKeys Test", 640, 480, 0);
if (window == NULL) {
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't create 640x480 window: %s\n",
SDL_GetError());
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
quit(2);
}
/* On wayland, no window will actually show until something has
actually been displayed.
*/
renderer = SDL_CreateRenderer(window, NULL, 0);
SDL_RenderPresent(renderer);
#if __IOS__
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
/* Creating the context creates the view, which we need to show keyboard */
SDL_GL_CreateContext(window);
#endif
SDL_StartTextInput();
/* Print initial modifier state */
SDL_PumpEvents();
PrintModifierState();
/* Watch keystrokes */
done = 0;
2022-12-01 14:07:03 -07:00
thread = SDL_CreateThread(ping_thread, "PingThread", NULL);
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
#ifdef __EMSCRIPTEN__
emscripten_set_main_loop(loop, 0, 1);
#else
while (!done) {
loop();
}
#endif
SDL_WaitThread(thread, NULL);
SDL_Quit();
SDLTest_CommonDestroyState(state);
return 0;
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
}