SDL/test/Makefile.in

454 lines
11 KiB
Makefile
Raw Normal View History

# Makefile to build the SDL tests
srcdir = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
libexecdir = @libexecdir@
includedir = @includedir@
datarootdir = @datarootdir@
datadir = @datadir@
CC = @CC@
EXE = @EXE@
CFLAGS = @CFLAGS@ -g
LIBS = @LIBS@
TARGETS = \
checkkeys$(EXE) \
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
checkkeysthreads$(EXE) \
controllermap$(EXE) \
loopwave$(EXE) \
loopwavequeue$(EXE) \
testatomic$(EXE) \
testaudiocapture$(EXE) \
testaudiohotplug$(EXE) \
testaudioinfo$(EXE) \
testautomation$(EXE) \
2016-01-04 21:52:40 -07:00
testbounds$(EXE) \
2016-07-13 10:41:43 -06:00
testcustomcursor$(EXE) \
testdisplayinfo$(EXE) \
testdraw2$(EXE) \
testdrawchessboard$(EXE) \
testdropfile$(EXE) \
testerror$(EXE) \
testevdev$(EXE) \
testfile$(EXE) \
testfilesystem$(EXE) \
testgamecontroller$(EXE) \
testgeometry$(EXE) \
testgesture$(EXE) \
testhaptic$(EXE) \
testhittesting$(EXE) \
testhotplug$(EXE) \
testiconv$(EXE) \
testime$(EXE) \
testintersections$(EXE) \
testjoystick$(EXE) \
testkeys$(EXE) \
testloadso$(EXE) \
testlocale$(EXE) \
testlock$(EXE) \
testmessage$(EXE) \
2021-09-09 14:33:35 -06:00
testmouse$(EXE) \
testmultiaudio$(EXE) \
testnative$(EXE) \
testoverlay2$(EXE) \
testplatform$(EXE) \
testpower$(EXE) \
testqsort$(EXE) \
testrelative$(EXE) \
testrendercopyex$(EXE) \
testrendertarget$(EXE) \
testresample$(EXE) \
testrumble$(EXE) \
testscale$(EXE) \
testsem$(EXE) \
2018-08-21 13:11:34 -06:00
testsensor$(EXE) \
testshape$(EXE) \
testsprite2$(EXE) \
testspriteminimal$(EXE) \
teststreaming$(EXE) \
testsurround$(EXE) \
testthread$(EXE) \
testtimer$(EXE) \
testurl$(EXE) \
testver$(EXE) \
testviewport$(EXE) \
testvulkan$(EXE) \
testwm2$(EXE) \
testyuv$(EXE) \
torturethread$(EXE) \
2021-11-20 11:55:20 -07:00
@OPENGL_TARGETS@ += testgl2$(EXE) testshader$(EXE)
@OPENGLES1_TARGETS@ += testgles$(EXE)
@OPENGLES2_TARGETS@ += testgles2$(EXE)
all: Makefile $(TARGETS) copydatafiles generatetestmeta
installedtestsdir = $(libexecdir)/installed-tests/SDL2
installedtestsmetadir = $(datadir)/installed-tests/SDL2
generatetestmeta:
rm -f *.test
set -e; for exe in $(noninteractive) $(needs_audio) $(needs_display); do \
sed \
-e 's#@installedtestsdir@#$(installedtestsdir)#g' \
-e "s#@exe@#$$exe#g" \
< $(srcdir)/template.test.in > $$exe.test; \
done
install: all
install -d $(DESTDIR)$(installedtestsdir)
install $(TARGETS) $(DESTDIR)$(installedtestsdir)
install -m644 $(DATA) $(DESTDIR)$(installedtestsdir)
install -d $(DESTDIR)$(installedtestsmetadir)
install -m644 *.test $(DESTDIR)$(installedtestsmetadir)
Makefile: $(srcdir)/Makefile.in
$(SHELL) config.status $@
checkkeys$(EXE): $(srcdir)/checkkeys.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
checkkeysthreads$(EXE): $(srcdir)/checkkeysthreads.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
loopwave$(EXE): $(srcdir)/loopwave.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
loopwavequeue$(EXE): $(srcdir)/loopwavequeue.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testsurround$(EXE): $(srcdir)/testsurround.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testresample$(EXE): $(srcdir)/testresample.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testaudioinfo$(EXE): $(srcdir)/testaudioinfo.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testautomation$(EXE): $(srcdir)/testautomation.c \
$(srcdir)/testautomation_audio.c \
$(srcdir)/testautomation_clipboard.c \
$(srcdir)/testautomation_events.c \
$(srcdir)/testautomation_guid.c \
$(srcdir)/testautomation_hints.c \
$(srcdir)/testautomation_joystick.c \
$(srcdir)/testautomation_keyboard.c \
$(srcdir)/testautomation_main.c \
$(srcdir)/testautomation_math.c \
$(srcdir)/testautomation_mouse.c \
$(srcdir)/testautomation_pixels.c \
$(srcdir)/testautomation_platform.c \
$(srcdir)/testautomation_rect.c \
$(srcdir)/testautomation_render.c \
$(srcdir)/testautomation_rwops.c \
$(srcdir)/testautomation_sdltest.c \
$(srcdir)/testautomation_stdlib.c \
$(srcdir)/testautomation_surface.c \
$(srcdir)/testautomation_syswm.c \
$(srcdir)/testautomation_timer.c \
$(srcdir)/testautomation_video.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testmultiaudio$(EXE): $(srcdir)/testmultiaudio.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testaudiohotplug$(EXE): $(srcdir)/testaudiohotplug.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testaudiocapture$(EXE): $(srcdir)/testaudiocapture.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testatomic$(EXE): $(srcdir)/testatomic.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testintersections$(EXE): $(srcdir)/testintersections.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testrelative$(EXE): $(srcdir)/testrelative.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testhittesting$(EXE): $(srcdir)/testhittesting.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testdraw2$(EXE): $(srcdir)/testdraw2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testdrawchessboard$(EXE): $(srcdir)/testdrawchessboard.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testdropfile$(EXE): $(srcdir)/testdropfile.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testerror$(EXE): $(srcdir)/testerror.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testevdev$(EXE): $(srcdir)/testevdev.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testfile$(EXE): $(srcdir)/testfile.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testgamecontroller$(EXE): $(srcdir)/testgamecontroller.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testgeometry$(EXE): $(srcdir)/testgeometry.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testgesture$(EXE): $(srcdir)/testgesture.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testgl2$(EXE): $(srcdir)/testgl2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testgles$(EXE): $(srcdir)/testgles.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @GLESLIB@ @MATHLIB@
testgles2$(EXE): $(srcdir)/testgles2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testgles2_sdf$(EXE): $(srcdir)/testgles2_sdf.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testhaptic$(EXE): $(srcdir)/testhaptic.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testhotplug$(EXE): $(srcdir)/testhotplug.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testrumble$(EXE): $(srcdir)/testrumble.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testthread$(EXE): $(srcdir)/testthread.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testiconv$(EXE): $(srcdir)/testiconv.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testime$(EXE): $(srcdir)/testime.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @SDL_TTF_LIB@
testjoystick$(EXE): $(srcdir)/testjoystick.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testkeys$(EXE): $(srcdir)/testkeys.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testloadso$(EXE): $(srcdir)/testloadso.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testlock$(EXE): $(srcdir)/testlock.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
ifeq (@ISMACOSX@,true)
testnative$(EXE): $(srcdir)/testnative.c \
$(srcdir)/testnativecocoa.m \
$(srcdir)/testutils.c \
$(srcdir)/testnativex11.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) -framework Cocoa @XLIB@
endif
ifeq (@ISWINDOWS@,true)
testnative$(EXE): $(srcdir)/testnative.c \
$(srcdir)/testutils.c \
$(srcdir)/testnativew32.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
endif
ifeq (@ISUNIX@,true)
testnative$(EXE): $(srcdir)/testnative.c \
$(srcdir)/testutils.c \
$(srcdir)/testnativex11.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @XLIB@
endif
ifeq (@ISOS2@,true)
testnative$(EXE): $(srcdir)/testnative.c \
$(srcdir)/testnativeos2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
endif
#there's probably a better way of doing this
ifeq (@ISMACOSX@,false)
ifeq (@ISWINDOWS@,false)
ifeq (@ISUNIX@,false)
ifeq (@ISOS2@,false)
testnative$(EXE): ;
endif
endif
endif
endif
testoverlay2$(EXE): $(srcdir)/testoverlay2.c $(srcdir)/testyuv_cvt.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testplatform$(EXE): $(srcdir)/testplatform.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testpower$(EXE): $(srcdir)/testpower.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testfilesystem$(EXE): $(srcdir)/testfilesystem.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testrendertarget$(EXE): $(srcdir)/testrendertarget.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testscale$(EXE): $(srcdir)/testscale.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testsem$(EXE): $(srcdir)/testsem.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
2018-08-21 13:11:34 -06:00
testsensor$(EXE): $(srcdir)/testsensor.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testshader$(EXE): $(srcdir)/testshader.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @GLLIB@ @MATHLIB@
testshape$(EXE): $(srcdir)/testshape.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testsprite2$(EXE): $(srcdir)/testsprite2.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testspriteminimal$(EXE): $(srcdir)/testspriteminimal.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
teststreaming$(EXE): $(srcdir)/teststreaming.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testtimer$(EXE): $(srcdir)/testtimer.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testurl$(EXE): $(srcdir)/testurl.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testver$(EXE): $(srcdir)/testver.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testviewport$(EXE): $(srcdir)/testviewport.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testwm2$(EXE): $(srcdir)/testwm2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testyuv$(EXE): $(srcdir)/testyuv.c $(srcdir)/testyuv_cvt.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
torturethread$(EXE): $(srcdir)/torturethread.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testrendercopyex$(EXE): $(srcdir)/testrendercopyex.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testmessage$(EXE): $(srcdir)/testmessage.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
2015-07-14 19:28:26 -06:00
testdisplayinfo$(EXE): $(srcdir)/testdisplayinfo.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
2016-03-09 23:50:43 -07:00
testqsort$(EXE): $(srcdir)/testqsort.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
2016-01-04 21:52:40 -07:00
testbounds$(EXE): $(srcdir)/testbounds.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
2016-07-13 10:41:43 -06:00
testcustomcursor$(EXE): $(srcdir)/testcustomcursor.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
controllermap$(EXE): $(srcdir)/controllermap.c $(srcdir)/testutils.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testvulkan$(EXE): $(srcdir)/testvulkan.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testlocale$(EXE): $(srcdir)/testlocale.c
$(CC) -o $@ $? $(CFLAGS) $(LIBS)
2021-09-09 14:33:35 -06:00
testmouse$(EXE): $(srcdir)/testmouse.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
clean:
rm -f $(TARGETS) *.test
distclean: clean
rm -f Makefile
rm -f config.status config.cache config.log
rm -rf $(srcdir)/autom4te*
noninteractive = \
testatomic$(EXE) \
testerror$(EXE) \
testevdev$(EXE) \
testfilesystem$(EXE) \
testkeys$(EXE) \
testlocale$(EXE) \
testplatform$(EXE) \
testpower$(EXE) \
testqsort$(EXE) \
testthread$(EXE) \
testtimer$(EXE) \
testver$(EXE) \
$(NULL)
needs_audio = \
testaudioinfo$(EXE) \
testsurround$(EXE) \
$(NULL)
needs_display = \
testbounds$(EXE) \
testdisplayinfo$(EXE) \
$(NULL)
TESTS = $(noninteractive) $(needs_audio) $(needs_display)
check:
@set -e; \
status=0; \
export SDL_AUDIODRIVER=dummy; \
export SDL_VIDEODRIVER=dummy; \
for exe in $(TESTS); do \
echo "$$exe..."; \
if ./"$$exe"; then \
echo "$$exe: OK"; \
else \
echo "$$exe: FAILED: $$?"; \
status=1; \
fi; \
done; \
exit "$$status"
DATA = \
axis.bmp \
button.bmp \
controllermap.bmp \
controllermap_back.bmp \
icon.bmp \
moose.dat \
sample.bmp \
sample.wav \
testgles2_sdf_img_normal.bmp \
testgles2_sdf_img_sdf.bmp \
testyuv.bmp \
unifont-13.0.06.hex \
utf8.txt \
$(NULL)
ifneq ($(srcdir), .)
$(DATA) : %: $(srcdir)/% Makefile
cp $< $@
endif
copydatafiles: $(DATA)
.PHONY : copydatafiles