geemili
/
SDL
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
SDL/test/Makefile.in

454 lines
11 KiB
Makefile
Raw Normal View History

Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
# Makefile to build the SDL tests
srcdir = @srcdir@
test: Add a `make install` target for the tests This makes it more convenient to compile them alongside SDL, install them in an optional package and use them as smoke-tests or diagnostic tools. The default installation directory is taken from GNOME's installed-tests, which seems as good a convention as any other: https://wiki.gnome.org/Initiatives/GnomeGoals/InstalledTests Signed-off-by: Simon McVittie <smcv@collabora.com>
2020-11-25 06:30:29 -07:00
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
libexecdir = @libexecdir@
includedir = @includedir@
datarootdir = @datarootdir@
datadir = @datadir@
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
CC = @CC@
EXE = @EXE@
CFLAGS = @CFLAGS@ -g
LIBS = @LIBS@
TARGETS = \
checkkeys$(EXE) \
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
checkkeysthreads$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
controllermap$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
loopwave$(EXE) \
loopwavequeue$(EXE) \
testatomic$(EXE) \
audio: Initial bits to enable audio capture support.
2016-07-31 22:18:56 -06:00
testaudiocapture$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testaudiohotplug$(EXE) \
testaudioinfo$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testautomation$(EXE) \
Added SDL_GetDisplayUsableBounds().
2016-01-04 21:52:40 -07:00
testbounds$(EXE) \
Tests: Would be wise to compile this
2016-07-13 10:41:43 -06:00
testcustomcursor$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testdisplayinfo$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testdraw2$(EXE) \
testdrawchessboard$(EXE) \
testdropfile$(EXE) \
testerror$(EXE) \
test: Add a unit test for input device classification heuristics This uses pre-recorded evdev capabilities, so that we can check for regressions without the devices having to be physically present. Signed-off-by: Simon McVittie <smcv@collabora.com>
2020-11-11 20:15:43 -07:00
testevdev$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testfile$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testfilesystem$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testgamecontroller$(EXE) \
Add testgeometry to draw a non uniform triangle --use-texture: an option to load icon.bmp as a texture handle mouse motion: rotate the triangle
2021-04-06 13:49:23 -06:00
testgeometry$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testgesture$(EXE) \
testhaptic$(EXE) \
testhittesting$(EXE) \
testhotplug$(EXE) \
testiconv$(EXE) \
testime$(EXE) \
testintersections$(EXE) \
testjoystick$(EXE) \
testkeys$(EXE) \
testloadso$(EXE) \
locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.
2020-05-04 00:27:29 -06:00
testlocale$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testlock$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testmessage$(EXE) \
Add testmouse
2021-09-09 14:33:35 -06:00
testmouse$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testmultiaudio$(EXE) \
testnative$(EXE) \
testoverlay2$(EXE) \
testplatform$(EXE) \
testpower$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testqsort$(EXE) \
testrelative$(EXE) \
testrendercopyex$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testrendertarget$(EXE) \
testresample$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testrumble$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testscale$(EXE) \
testsem$(EXE) \
First pass on the new SDL sensor API
2018-08-21 13:11:34 -06:00
testsensor$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testshape$(EXE) \
testsprite2$(EXE) \
testspriteminimal$(EXE) \
teststreaming$(EXE) \
testsurround: Add surround sound channel tester
2021-10-29 00:11:59 -06:00
testsurround$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testthread$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testtimer$(EXE) \
Removed SDL_AndroidOpenURL, added SDL_OpenURL. Still needs to be wired into Xcode and Visual Studio projects.
2020-10-05 09:30:33 -06:00
testurl$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testver$(EXE) \
testviewport$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testvulkan$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testwm2$(EXE) \
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
testyuv$(EXE) \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
torturethread$(EXE) \
test: configure/make shouldn't build GL/GLES1/GLES2 programs if unsupported.
2019-05-18 21:47:57 -06:00
remove excess whitespace
2021-11-20 11:55:20 -07:00
test: configure/make shouldn't build GL/GLES1/GLES2 programs if unsupported.
2019-05-18 21:47:57 -06:00
@OPENGL_TARGETS@ += testgl2$(EXE) testshader$(EXE)
@OPENGLES1_TARGETS@ += testgles$(EXE)
@OPENGLES2_TARGETS@ += testgles2$(EXE)
test: Install GNOME-style installed-tests metadata This allows these tests to be discovered and run by gnome-desktop-test-runner. Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-05-04 06:53:15 -06:00
all: Makefile $(TARGETS) copydatafiles generatetestmeta
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
test: Add a `make install` target for the tests This makes it more convenient to compile them alongside SDL, install them in an optional package and use them as smoke-tests or diagnostic tools. The default installation directory is taken from GNOME's installed-tests, which seems as good a convention as any other: https://wiki.gnome.org/Initiatives/GnomeGoals/InstalledTests Signed-off-by: Simon McVittie <smcv@collabora.com>
2020-11-25 06:30:29 -07:00
installedtestsdir = $(libexecdir)/installed-tests/SDL2
test: Install GNOME-style installed-tests metadata This allows these tests to be discovered and run by gnome-desktop-test-runner. Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-05-04 06:53:15 -06:00
installedtestsmetadir = $(datadir)/installed-tests/SDL2
generatetestmeta:
rm -f *.test
set -e; for exe in $(noninteractive) $(needs_audio) $(needs_display); do \
sed \
-e 's#@installedtestsdir@#$(installedtestsdir)#g' \
-e "s#@exe@#$$exe#g" \
< $(srcdir)/template.test.in > $$exe.test; \
done
test: Add a `make install` target for the tests This makes it more convenient to compile them alongside SDL, install them in an optional package and use them as smoke-tests or diagnostic tools. The default installation directory is taken from GNOME's installed-tests, which seems as good a convention as any other: https://wiki.gnome.org/Initiatives/GnomeGoals/InstalledTests Signed-off-by: Simon McVittie <smcv@collabora.com>
2020-11-25 06:30:29 -07:00
install: all
test: Use install(1) more portably I had assumed that only Linux users would be interested in GNOME-style installed-tests, but in principle there's no reason why they can't be used on non-Linux. Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-05-20 12:43:02 -06:00
install -d $(DESTDIR)$(installedtestsdir)
install $(TARGETS) $(DESTDIR)$(installedtestsdir)
install -m644 $(DATA) $(DESTDIR)$(installedtestsdir)
install -d $(DESTDIR)$(installedtestsmetadir)
install -m644 *.test $(DESTDIR)$(installedtestsmetadir)
test: Add a `make install` target for the tests This makes it more convenient to compile them alongside SDL, install them in an optional package and use them as smoke-tests or diagnostic tools. The default installation directory is taken from GNOME's installed-tests, which seems as good a convention as any other: https://wiki.gnome.org/Initiatives/GnomeGoals/InstalledTests Signed-off-by: Simon McVittie <smcv@collabora.com>
2020-11-25 06:30:29 -07:00
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
Makefile: $(srcdir)/Makefile.in
$(SHELL) config.status $@
checkkeys$(EXE): $(srcdir)/checkkeys.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Modifies WaitEvent and WaitEventTimeout to actually wait instead of polling When possible use native os functions to make a blocking call waiting for an incoming event. Previous behavior was to continuously poll the event queue with a small delay between each poll. The blocking call uses a new optional video driver event, WaitEventTimeout, if available. It is called only if an window already shown is available. If present the window is designated using the variable wakeup_window to receive a wakeup event if needed. The WaitEventTimeout function accept a timeout parameter. If positive the call will wait for an event or return if the timeout expired without any event. If the timeout is zero it will implement a polling behavior. If the timeout is negative the function will block indefinetely waiting for an event. To let the main thread sees events sent form a different thread a "wake-up" signal is sent to the main thread if the main thread is in a blocking state. The wake-up event is sent to the designated wakeup_window if present. The wake-up event is sent only if the PushEvent call is coming from a different thread. Before sending the wake-up event the ID of the thread making the blocking call is saved using the variable blocking_thread_id and it is compared to the current thread's id to decide if the wake-up event should be sent. Two new optional video device methods are introduced: WaitEventTimeout SendWakeupEvent in addition the mutex wakeup_lock which is defined and initialized but only for the drivers supporting the methods above. If the methods are not present the system behaves as previously performing a periodic polling of the events queue. The blocking call is disabled if a joystick or sensor is detected and falls back to previous behavior.
2021-03-12 13:58:20 -07:00
checkkeysthreads$(EXE): $(srcdir)/checkkeysthreads.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
loopwave$(EXE): $(srcdir)/loopwave.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
loopwavequeue$(EXE): $(srcdir)/loopwavequeue.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testsurround: Add surround sound channel tester
2021-10-29 00:11:59 -06:00
testsurround$(EXE): $(srcdir)/testsurround.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testresample$(EXE): $(srcdir)/testresample.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testaudioinfo$(EXE): $(srcdir)/testaudioinfo.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testautomation$(EXE): $(srcdir)/testautomation.c \
$(srcdir)/testautomation_audio.c \
$(srcdir)/testautomation_clipboard.c \
$(srcdir)/testautomation_events.c \
Merge testguid into testautomation (#5873)
2022-07-01 17:27:51 -06:00
$(srcdir)/testautomation_guid.c \
Added a virtual joystick automated test Useful to verify https://github.com/libsdl-org/SDL/commit/4fa2653394150140c4d69cf66a78cd83e1175f99 on a big-endian system
2022-07-13 09:57:40 -06:00
$(srcdir)/testautomation_hints.c \
$(srcdir)/testautomation_joystick.c \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(srcdir)/testautomation_keyboard.c \
$(srcdir)/testautomation_main.c \
Added a virtual joystick automated test Useful to verify https://github.com/libsdl-org/SDL/commit/4fa2653394150140c4d69cf66a78cd83e1175f99 on a big-endian system
2022-07-13 09:57:40 -06:00
$(srcdir)/testautomation_math.c \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(srcdir)/testautomation_mouse.c \
$(srcdir)/testautomation_pixels.c \
$(srcdir)/testautomation_platform.c \
$(srcdir)/testautomation_rect.c \
$(srcdir)/testautomation_render.c \
$(srcdir)/testautomation_rwops.c \
$(srcdir)/testautomation_sdltest.c \
$(srcdir)/testautomation_stdlib.c \
$(srcdir)/testautomation_surface.c \
$(srcdir)/testautomation_syswm.c \
$(srcdir)/testautomation_timer.c \
Added a virtual joystick automated test Useful to verify https://github.com/libsdl-org/SDL/commit/4fa2653394150140c4d69cf66a78cd83e1175f99 on a big-endian system
2022-07-13 09:57:40 -06:00
$(srcdir)/testautomation_video.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testmultiaudio$(EXE): $(srcdir)/testmultiaudio.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testaudiohotplug$(EXE): $(srcdir)/testaudiohotplug.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
audio: Initial bits to enable audio capture support.
2016-07-31 22:18:56 -06:00
testaudiocapture$(EXE): $(srcdir)/testaudiocapture.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testatomic$(EXE): $(srcdir)/testatomic.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testintersections$(EXE): $(srcdir)/testintersections.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testrelative$(EXE): $(srcdir)/testrelative.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testhittesting$(EXE): $(srcdir)/testhittesting.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testdraw2$(EXE): $(srcdir)/testdraw2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testdrawchessboard$(EXE): $(srcdir)/testdrawchessboard.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testdropfile$(EXE): $(srcdir)/testdropfile.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testerror$(EXE): $(srcdir)/testerror.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add a unit test for input device classification heuristics This uses pre-recorded evdev capabilities, so that we can check for regressions without the devices having to be physically present. Signed-off-by: Simon McVittie <smcv@collabora.com>
2020-11-11 20:15:43 -07:00
testevdev$(EXE): $(srcdir)/testevdev.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testfile$(EXE): $(srcdir)/testfile.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testgamecontroller$(EXE): $(srcdir)/testgamecontroller.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Add testgeometry to draw a non uniform triangle --use-texture: an option to load icon.bmp as a texture handle mouse motion: rotate the triangle
2021-04-06 13:49:23 -06:00
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testgeometry$(EXE): $(srcdir)/testgeometry.c $(srcdir)/testutils.c
Add testgeometry to draw a non uniform triangle --use-texture: an option to load icon.bmp as a texture handle mouse motion: rotate the triangle
2021-04-06 13:49:23 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testgesture$(EXE): $(srcdir)/testgesture.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
Refactoring: move GUID operations out of Joystick - SDL_JoystickGUID -> SDL_GUID (though we retain a type alias) - Operations for GUID <-> String ops are now in src/SDL_guid.c and include/SDL_guid.h - The corresponding Joystick operations delegate to SDL_guid.c - Added test/testguid.c
2022-06-04 14:16:28 -06:00
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testgl2$(EXE): $(srcdir)/testgl2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testgles$(EXE): $(srcdir)/testgles.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @GLESLIB@ @MATHLIB@
testgles2$(EXE): $(srcdir)/testgles2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testgles2_sdf$(EXE): $(srcdir)/testgles2_sdf.c $(srcdir)/testutils.c
Add basic testgles2_sdf program to demonstrate sign distance field with opengles2
2021-01-19 02:40:42 -07:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testhaptic$(EXE): $(srcdir)/testhaptic.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testhotplug$(EXE): $(srcdir)/testhotplug.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testrumble$(EXE): $(srcdir)/testrumble.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testthread$(EXE): $(srcdir)/testthread.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testiconv$(EXE): $(srcdir)/testiconv.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testime$(EXE): $(srcdir)/testime.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @SDL_TTF_LIB@
testjoystick$(EXE): $(srcdir)/testjoystick.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testkeys$(EXE): $(srcdir)/testkeys.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testloadso$(EXE): $(srcdir)/testloadso.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testlock$(EXE): $(srcdir)/testlock.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
ifeq (@ISMACOSX@,true)
testnative$(EXE): $(srcdir)/testnative.c \
$(srcdir)/testnativecocoa.m \
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
$(srcdir)/testutils.c \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(srcdir)/testnativex11.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) -framework Cocoa @XLIB@
endif
ifeq (@ISWINDOWS@,true)
testnative$(EXE): $(srcdir)/testnative.c \
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
$(srcdir)/testutils.c \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(srcdir)/testnativew32.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
endif
ifeq (@ISUNIX@,true)
testnative$(EXE): $(srcdir)/testnative.c \
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
$(srcdir)/testutils.c \
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(srcdir)/testnativex11.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @XLIB@
endif
initial attempt at adding os2 support to autotools
2021-11-30 15:55:56 -07:00
ifeq (@ISOS2@,true)
testnative$(EXE): $(srcdir)/testnative.c \
$(srcdir)/testnativeos2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
endif
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
#there's probably a better way of doing this
ifeq (@ISMACOSX@,false)
ifeq (@ISWINDOWS@,false)
ifeq (@ISUNIX@,false)
initial attempt at adding os2 support to autotools
2021-11-30 15:55:56 -07:00
ifeq (@ISOS2@,false)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testnative$(EXE): ;
endif
endif
endif
initial attempt at adding os2 support to autotools
2021-11-30 15:55:56 -07:00
endif
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testoverlay2$(EXE): $(srcdir)/testoverlay2.c $(srcdir)/testyuv_cvt.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testplatform$(EXE): $(srcdir)/testplatform.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testpower$(EXE): $(srcdir)/testpower.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testfilesystem$(EXE): $(srcdir)/testfilesystem.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testrendertarget$(EXE): $(srcdir)/testrendertarget.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testscale$(EXE): $(srcdir)/testscale.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testsem$(EXE): $(srcdir)/testsem.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
First pass on the new SDL sensor API
2018-08-21 13:11:34 -06:00
testsensor$(EXE): $(srcdir)/testsensor.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testshader$(EXE): $(srcdir)/testshader.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @GLLIB@ @MATHLIB@
testshape$(EXE): $(srcdir)/testshape.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testsprite2$(EXE): $(srcdir)/testsprite2.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testspriteminimal$(EXE): $(srcdir)/testspriteminimal.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
teststreaming$(EXE): $(srcdir)/teststreaming.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testtimer$(EXE): $(srcdir)/testtimer.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Removed SDL_AndroidOpenURL, added SDL_OpenURL. Still needs to be wired into Xcode and Visual Studio projects.
2020-10-05 09:30:33 -06:00
testurl$(EXE): $(srcdir)/testurl.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
testver$(EXE): $(srcdir)/testver.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testviewport$(EXE): $(srcdir)/testviewport.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
testwm2$(EXE): $(srcdir)/testwm2.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed building YUV test programs (thanks Ozkan!)
2017-11-17 11:54:46 -07:00
testyuv$(EXE): $(srcdir)/testyuv.c $(srcdir)/testyuv_cvt.c
Updated SDL's YUV support, many thanks to Adrien Descamps New functions get and set the YUV colorspace conversion mode: SDL_SetYUVConversionMode() SDL_GetYUVConversionMode() SDL_GetYUVConversionModeForResolution() SDL_ConvertPixels() converts between all supported RGB and YUV formats, with SSE acceleration for converting from planar YUV formats (YV12, NV12, etc) to common RGB/RGBA formats. Added a new test program, testyuv, to verify correctness and speed of YUV conversion functionality.
2017-11-12 23:51:12 -07:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
torturethread$(EXE): $(srcdir)/torturethread.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
testrendercopyex$(EXE): $(srcdir)/testrendercopyex.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS) @MATHLIB@
testmessage$(EXE): $(srcdir)/testmessage.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Added test/testdisplayinfo.c
2015-07-14 19:28:26 -06:00
testdisplayinfo$(EXE): $(srcdir)/testdisplayinfo.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
A simple test program for SDL_qsort().
2016-03-09 23:50:43 -07:00
testqsort$(EXE): $(srcdir)/testqsort.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Added SDL_GetDisplayUsableBounds().
2016-01-04 21:52:40 -07:00
testbounds$(EXE): $(srcdir)/testbounds.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
Tests: Would be wise to compile this
2016-07-13 10:41:43 -06:00
testcustomcursor$(EXE): $(srcdir)/testcustomcursor.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
test: Add some common code to load test resources As well as reducing duplication, this lets the tests load their resources from the SDL_GetBasePath() on platforms that support it, which is useful if the tests are compiled along with the rest of SDL and installed below /usr as manual tests, similar to GNOME's installed-tests convention. Thanks to Ozkan Sezer for the OS/2 build glue. Co-authored-by: Ozkan Sezer <sezeroz@gmail.com> Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:07:18 -06:00
controllermap$(EXE): $(srcdir)/controllermap.c $(srcdir)/testutils.c
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
vulkan: Initial Vulkan support! This work was done by Jacob Lifshay and Mark Callow; I'm just merging it into revision control.
2017-08-27 20:15:57 -06:00
testvulkan$(EXE): $(srcdir)/testvulkan.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.
2020-05-04 00:27:29 -06:00
testlocale$(EXE): $(srcdir)/testlocale.c
$(CC) -o $@ $? $(CFLAGS) $(LIBS)
Add testmouse
2021-09-09 14:33:35 -06:00
testmouse$(EXE): $(srcdir)/testmouse.c
$(CC) -o $@ $^ $(CFLAGS) $(LIBS)
locale: Implemented SDL_GetPreferredLocales(). This was something I proposed a long time ago, Sylvain Becker did additional work on it, then back to me. Fixes Bugzilla #2131.
2020-05-04 00:27:29 -06:00
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
clean:
test: Install GNOME-style installed-tests metadata This allows these tests to be discovered and run by gnome-desktop-test-runner. Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-05-04 06:53:15 -06:00
rm -f $(TARGETS) *.test
Fixed crash if initialization of EGL failed but was tried again later. The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly uninitialized data structure if loading the library first failed. A later try to use EGL then skipped initialization and assumed it was previously successful because the data structure now already existed. This led to at least one crash in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was dereferenced to make a call to eglBindAPI().
2015-06-21 09:33:46 -06:00
distclean: clean
rm -f Makefile
rm -f config.status config.cache config.log
rm -rf $(srcdir)/autom4te*
test: Makefile.in should copy bitmap and wave files to build directory. I've lost count of the times I've forgotten to do this manually and wondered why loopwave can't open sample.wav. :)
2017-05-29 16:24:06 -06:00
test: Run selected noninteractive tests at build-time In Autotools, these are run by `make -C ${builddir}/test check`. In CMake, they're run by `make -C ${builddir} test` or `ninja -C ${builddir} test` or `ctest --test-dir ${builddir}`. Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 06:33:58 -06:00
noninteractive = \
testatomic$(EXE) \
testerror$(EXE) \
testevdev$(EXE) \
testfilesystem$(EXE) \
testkeys$(EXE) \
testlocale$(EXE) \
testplatform$(EXE) \
testpower$(EXE) \
testqsort$(EXE) \
testthread$(EXE) \
testtimer$(EXE) \
testver$(EXE) \
$(NULL)
needs_audio = \
testaudioinfo$(EXE) \
testsurround$(EXE) \
$(NULL)
needs_display = \
testbounds$(EXE) \
testdisplayinfo$(EXE) \
$(NULL)
TESTS = $(noninteractive) $(needs_audio) $(needs_display)
check:
@set -e; \
status=0; \
export SDL_AUDIODRIVER=dummy; \
export SDL_VIDEODRIVER=dummy; \
for exe in $(TESTS); do \
echo "$$exe..."; \
if ./"$$exe"; then \
echo "$$exe: OK"; \
else \
echo "$$exe: FAILED: $$?"; \
status=1; \
fi; \
done; \
exit "$$status"
test: Use a static pattern rule to copy data to $(builddir) The version with an implicit pattern rule tended to fail if test/ was built in an "out-of-tree" build directory not below test/, for example: cd SDL mkdir _build-test ( cd _build-test; ../test/configure ) make -C _build-test as a result of the pattern rule first checking for axis.bmp, then for ../test/axis.bmp, then ../test/../test/axis.bmp, and so on until the maximum path length was reached. Note that this requires GNU make. The FreeBSD ports file for SDL seems to use GNU make (gmake) already, so presumably SDL's build system is already relying on GNU make extensions. Signed-off-by: Simon McVittie <smcv@debian.org>
2021-09-06 06:09:09 -06:00
DATA = \
axis.bmp \
button.bmp \
controllermap.bmp \
controllermap_back.bmp \
icon.bmp \
moose.dat \
sample.bmp \
sample.wav \
testgles2_sdf_img_normal.bmp \
testgles2_sdf_img_sdf.bmp \
testyuv.bmp \
test: Makefile should copy unifont file, for testime.c to use.
2021-11-20 11:33:29 -07:00
unifont-13.0.06.hex \
test: Copy utf8.txt to build directory testiconv wants this. Signed-off-by: Simon McVittie <smcv@collabora.com>
2022-04-12 07:05:06 -06:00
utf8.txt \
test: Use a static pattern rule to copy data to $(builddir) The version with an implicit pattern rule tended to fail if test/ was built in an "out-of-tree" build directory not below test/, for example: cd SDL mkdir _build-test ( cd _build-test; ../test/configure ) make -C _build-test as a result of the pattern rule first checking for axis.bmp, then for ../test/axis.bmp, then ../test/../test/axis.bmp, and so on until the maximum path length was reached. Note that this requires GNU make. The FreeBSD ports file for SDL seems to use GNU make (gmake) already, so presumably SDL's build system is already relying on GNU make extensions. Signed-off-by: Simon McVittie <smcv@debian.org>
2021-09-06 06:09:09 -06:00
$(NULL)
test: Makefile.in should copy bitmap and wave files to build directory. I've lost count of the times I've forgotten to do this manually and wondered why loopwave can't open sample.wav. :)
2017-05-29 16:24:06 -06:00
test: Use a static pattern rule to copy data to $(builddir) The version with an implicit pattern rule tended to fail if test/ was built in an "out-of-tree" build directory not below test/, for example: cd SDL mkdir _build-test ( cd _build-test; ../test/configure ) make -C _build-test as a result of the pattern rule first checking for axis.bmp, then for ../test/axis.bmp, then ../test/../test/axis.bmp, and so on until the maximum path length was reached. Note that this requires GNU make. The FreeBSD ports file for SDL seems to use GNU make (gmake) already, so presumably SDL's build system is already relying on GNU make extensions. Signed-off-by: Simon McVittie <smcv@debian.org>
2021-09-06 06:09:09 -06:00
ifneq ($(srcdir), .)
$(DATA) : %: $(srcdir)/% Makefile
test: Makefile should copy .dat files for testoverlay2.
2018-09-01 22:35:11 -06:00
cp $< $@
Fixed circular dependency problem when building in the test directory
2020-12-20 13:22:28 -07:00
endif
test: Makefile should copy .dat files for testoverlay2.
2018-09-01 22:35:11 -06:00
test: Use a static pattern rule to copy data to $(builddir) The version with an implicit pattern rule tended to fail if test/ was built in an "out-of-tree" build directory not below test/, for example: cd SDL mkdir _build-test ( cd _build-test; ../test/configure ) make -C _build-test as a result of the pattern rule first checking for axis.bmp, then for ../test/axis.bmp, then ../test/../test/axis.bmp, and so on until the maximum path length was reached. Note that this requires GNU make. The FreeBSD ports file for SDL seems to use GNU make (gmake) already, so presumably SDL's build system is already relying on GNU make extensions. Signed-off-by: Simon McVittie <smcv@debian.org>
2021-09-06 06:09:09 -06:00
copydatafiles: $(DATA)
test: Makefile.in should copy bitmap and wave files to build directory. I've lost count of the times I've forgotten to do this manually and wondered why loopwave can't open sample.wav. :)
2017-05-29 16:24:06 -06:00
.PHONY : copydatafiles