Alexey
Seems to be a missing functionality. I want to set an icon from RC file. I cant pass MAKEINTRESOURCE(X) string to SDL_RegisterApp() cause string returned by MAKEINTRESOURCE string is not actually a string and SDL_strlen will crash. Moreover LoadImage seems to be loading wrong icon size. LoadIcon seems to be fine.
Juha Niemim?
On AmigaOS 4 platform with Newlib 'C' library, there is a problem with failing fseeko64. This seemed to be caused by using fopen instead of fopen64.
xyzdragon
Reading https://wiki.libsdl.org/SDL_RenderCopyEx there is no mention what the angle means. Normally in a mathematically environment positive angles translate to counter-clockwise rotations, but in SDL positive angles means clockwise rotation.
Manuel
The attached patch adds support for KMS/DRM context graphics.
It builds with no problem on X86_64 GNU/Linux systems, provided the needed libraries are present, and on ARM GNU/Linux systems that have KMS/DRM support and a GLES2 implementation.
Tested on Raspberry Pi: KMS/DRM is what the Raspberry Pi will use as default in the near future, once the propietary DispmanX API by Broadcom is overtaken by open graphics stack, it's possible to boot current Raspbian system in KMS mode by adding "dtoverlay=vc4-kms-v3d" to config.txt on Raspbian's boot partition.
X86 systems use KMS right away in every current GNU/Linux system.
Simple build instructions:
$./autogen.sh
$./configure --enable-video-kmsdrm
$make
Simon Hug
SDL_GL_GetAttribute doesn't check if a video driver has been initialized and will access the SDL_VideoDevice pointer, which is NULL at that point.
I think all of the attributes require an initialized driver, so a simple NULL check should fix it. Patch is attached.
Holger Schemel
Summary: This patch adds support for key events for the "rewind" and "fast forward" media keys on the Amazon Fire TV remote control.
How to reproduce the problem: Run Android build of SDL2 application on the Amazon Fire TV (tested with "stick" version) and log key events.
Expected behaviour: Every key pressed on the Fire TV remote control should result in a corresponding key event (pressed/released).
Observed behaviour: Of the bottom row of buttons on the Fire TV remote control, only the "play/pause" (middle) button generates a key event, while the "rewind" (left) and "fast forward" (right) buttons to not generate any event at all.
The attached patch adds support for these two missing buttons/keys.
Note 1: Some missing definitions were added for the already existing key codes SDL_SCANCODE_APP1 and SDL_SCANCODE_APP2 (to keep up the correct order of enumerations / array positions when adding the two new key codes).
Note 2: Definitions in "scancodes_linux.h" and "scancodes_xfree86.h" (to also add support for these keys on other platforms) were added without testing. However, I was unable to find corresponding definitions for these two media keys for Windows and Mac OS X.
Note 3: I have also updated the (broken) link to the USB usage page standard PDF document (comment in "include/SDL_scancode.h").
Ozkan Sezer
(In reply to Ryan C. Gordon from comment #9)
> I've put this patch in as https://hg.libsdl.org/SDL/rev/7213ae46e870 ...can
> you verify this works on the latest MinGW?
>
> Thanks,
> --ryan.
This patch is wrong: the structure in question has nothing to do with any
gcc version in use. I suggest reverting this adding a conigury check for
it, instead. Something like the following should do it: (configure needs
regenerating.)
Simon Hug
There's a chance that an audio conversion from many channels to a few can use more than 9 audio filters. SDL_AudioCVT has 10 SDL_AudioFilter pointers of which one has to be the terminating NULL pointer. The SDL code has no checks for this limit. If it overflows there can be stack or heap corruption or a call to 0xa.
Attached patch adds a function that checks for this limit and throws an error if it is reached. Also adds some documentation.
Test parameters that trigger this issue:
AUDIO_U16MSB with 224 channels at 46359 Hz
V
AUDIO_S16MSB with 6 channels at 27463 Hz
The fuzzer program I uploaded in bug 3667 has more of them.
This only affects Wayland and DirectFB, as a Unix system generally has X11
support. Other platforms also have different sizes for the C union in
question, but are likely the only target for that platform, etc.
Apps that might run on Wayland or DirectFB will need to be compiled against
new headers from an official 2.0.6 release, or be prepared to force the x11
target, or not use SDL_GetWindowWMInfo().
Fixes Bugzilla #3428.
Now the compiler might say this:
'SDL_compile_time_assert_mytest' declared as an array with a negative size
instead of
'SDL_dummy_mytest' declared as an array with a negative size
It's easier for Visual Studio users that want this information to turn it on
or live without it, than it is to explain why every debugger that isn't Visual
Studio crashes out here. Eventually SetThreadDescription() will be the thing
everyone uses anyhow.
Fixes Bugzilla #3645.
(and several others).
"In particular, only one VkSurfaceKHR can exist at a time for a given window. Similarly, a native window cannot be used by both a VkSurfaceKHR and EGLSurface simultaneously"
CR: SamL
These don't have to be power-of-2 sizes anymore because of SDL_AudioStream,
and the new resampler, but also, many platforms don't give you power-of-2 DMA
buffer in the first place!
This should remain binary compatible with Windows XP, as we dynamically
load anything we need and fall back to DirectSound/WinMM/XAudio2 if not
available.
This defaults to the internal SDL resampler, since that's the likely default
without a system-wide install of libsamplerate, but those that need more can
tweak this.
Mark Callow
The attached patch does the following for the X11 and Windows platforms, the only ones where SDL attempts to use context_create_es_profile:
- Adds SDL_HINT_OPENGL_ES_DRIVER by which the application can
say to use the OpenGL ES driver & EGL rather than the Open GL
driver. (For bug #2570)
- Adds code to {WIN,X11}_GL_InitExtensions to determine the maximum
OpenGL ES version supported by the OpenGL driver (for bug #3145)
- Modifies the test that determines whether to use the OpenGL
driver or the real OpenGL ES driver to take into account the
hint, the requested and supported ES version and whether ES 1.X
is being requested. (For bug #2570 & bug #3145)
- Enables the testgles2 test for __WINDOWS__ and __LINUX__ and adds
the test to the VisualC projects.
With the fix in place I have run testdraw2, testgl and testgles2 without any issues and have run my own apps that use OpenGL, OpenGL ES 3 and OpenGL ES 1.1.
felix
Compiling even a simple SDL2 'hello world' program with gcc -Wstrict-prototypes (GCC 6.2.1) results in warnings like:
/usr/include/SDL2/SDL_gamecontroller.h:143:1: attention : function declaration isn't a prototype [-Wstrict-prototypes]
extern DECLSPEC int SDLCALL SDL_GameControllerNumMappings();
^~~~~~
It seems there is a missing 'void' between the parentheses.
This currently doesn't affect absolute motion, which would need to be implemented on each windowing system so the cursor matches the reported mouse coordinates.
realitix
SDL2 allows to create widow and to get information through SDL_SysWMinfo.
But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system.
Sadly, SDL2 provides only HWND but not HINSTANCE.
In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me.
I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
Albert Casals
On a RaspberryPI, it might become convenient to specify the Dispmanx layer SDL uses.
Currently, it is hardcoded to be 10000 to sit above most applications.
This can be specially useful when integrating other graphical apps and frameworks like OMXplayer, QT5 etc.. in order to have more flexibility on their Z-order.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
C.W. Betts
Swift is very strict with types, so much that those of different signedness/size must be cast. Most of the defines are imported as 32-bit signed integers, while the corresponding field in a struct is a 32-bit unsigned integer. Appending a "u" would cause the defined types to be imported as 32-bit unsigned integers.
joe.gsoc16
I recently looked into Unicode support in SDL2 and realized that
SDL_TEXTEDITING doesn't get triggered at all (Japanese IME).
According to others on IRC it works fine on Windows/Mac but not
for me on (arch)Linux.
When compiling SDL with autotools, IBus support is enabled by
default but not so with CMake.
I never used CMake before but got it working and also included
that pkg-config determines flags for dbus (FIXME in CMakeLists).
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
Simon Hug
The current SDL_SaveBMP_RW function that saves surfaces to a BMP uses an old bitmap header which doesn't officially support alpha channels. Applications just ignore the byte where the alpha is stored. This can easily be extended by using a newer header version and setting the alpha mask.
The attached patch has these changes:
- Extending the description of the function in the SDL_surface.h header with the supported formats.
- Refining when surfaces get stored to a 32-bit BMP. (Must have bit depth of 8 or higher and must have an alpha mask or colorkey.)
- Fixing a small bug that saves 24-bit BGR surfaces with a colorkey in a 24-bit BMP.
- Adding code that switches to the bitmap header version 4 if the surface has an alpha mask or colorkey. (I chose version 4 because Microsoft didn't lose its documentation behind a file cabinet like they did with version 3.)
- Adding a hint that can disable the use of the version 4 header. This is for people that need the legacy header or like the old behavior better. (I'm not sure about the hint name, though. May need changing if there are any rules to that.)
Kai Sterker
There are already patches available from mingw64 that fix the issue
https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-SDL2
With those applied, I could compile SDL2 without problems. But of course, it would be preferable if SDL built cleanly from source.
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
This is for corner cases where a multi-window app is activated and wants to
make a decision about where focus should go.
This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.
Sylvain
When using API 21 and running on an old device (android < 5.0 ?) some function are missing.
functions are (at least) : signal, sigemptyset, atof, stpcpy (strcat and strcpy), srand, rand.
Very few modifications on SDL to get this working :
on SDL
======
Undefine android configuration :
HAVE_SIGNAL
HAVE_SIGACTION
HAVE_ATOF
In "SDL_systrhead.c", comment out the few block of lines with "sigemptyset".
Android.mk:
remove the compilation of "test" directory because it contains a few rand/srand calls
Also, there are more discussions about this in internet :
https://groups.google.com/forum/#!topic/android-ndk/RjO9WmG9pfEhttp://stackoverflow.com/questions/25475055/android-ndk-load-library-cannot-locate-srand
This was the only thing that made SDL_config.h generate differently between
32 and 64-bit versions of Linux, so instead we force a function cast in our
X11 code to match our dynamic loader version, which removes the compile error
on some machines that prompted this test in the first place.
Xlib never wrote to this data, so if you're on an older Xlib where this param
wasn't const, your data should still be intact when we force the caller to
think it was actually const after all.
Fixes Bugzilla #1893.
Otherwise, SDL_PIXELFORMAT_BGR24 is reported as having alpha, because
its SDL_ARRAYORDER_BGR pixel order uses the same integer value as
SDL_PACKEDORDER_RGBA, since we weren't checking the pixel type to
differentiate.
Fixes Bugzilla #2977.
This lets windows know when they are dropping a mouse event because their
hit test reported something other than SDL_HITTEST_NORMAL. It lets them know
exactly where in the event queue this happened.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This is currently implemented for X11, Cocoa, Windows, and DirectFB.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This allows an app to know when a set of drops are coming in a grouping of
some sort (for example, a user selected multiple files and dropped them all
on the window with a single drag), and when that set is complete.
This also adds a window ID to the drop events, so the app can determine to
which window a given drop was delivered. For application-level drops (for
example, you launched an app by dropping a file on its icon), the window ID
will be zero.
Specifically: always on top, skip taskbar, tooltip, utility, and popup menu.
This is currently only implemented for X11.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
"UWP" appears to be Microsoft's new name for WinRT/Windows-Store APIs.
This set of changes updates SDL's WinRT backends to support the Win10 flavor
of WinRT. It has been tested on Win10 on a desktop. In theory, it should
also support Win10 on other devices (phone, Xbox One, etc.), however further
patches may be necessary.
This adds:
- a set of MSVC 2015 project files, for use in creating UWP apps
- modifications to various pieces of SDL, in order to compile via MSVC 2015 +
the Win10 API set
- enables SDL_Window resizing and programmatic-fullscreen toggling, when using
the WinRT backend
- WinRT README updates
WinRT 8.0 (Phone and non-Phone) didn't offer an API to set an already-created
thread's priority. WinRT 8.1 offered this API, along with several other
Win32 thread functions that were previously unavailable (in WinRT).
This change makes WinRT 8.1+ platforms use SDL's Win32 backend.
This change-set fixes a lot of windowing related bugs, especially with
regards to Windows 8.x apps running on Windows 10 (which was the driver for
this work). The primary fixes include:
* listed display modes were wrong, especially when launching apps into a
non-fullscreen space
* reported window flags were often wrong, especially on Windows 10
* fullscreen/windowed mode switches weren't failing (they are not
programmatically possible in Win 8.x apps).
Note that extra steps must be taken when using glReadPixels to read the contents of the main OpenGL ES framebuffer on iOS, if multisampling is used. See the OpenGL ES section of README-ios.md for details.
There are platforms it isn't implemented on (and currently can't be
implemented on!), and there's currently no way for an app to know this.
This shouldn't break ABI on apps that moved to a revision between 2.0.3 and
2.0.4.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
Clarify that grabbing the mouse only works with one window at a time; this was
always true at the system level, though SDL could previously get confused
by multiple simultaneous grabs, so now we explicitly break any existing
grab before starting a new one and document it as such.
Also track the window that is currently grabbed, and provide an API to query
for that window. This makes it easy to automate mouse ungrabbing at
breakpoints with gdb7's scripting, since the scripts can now know which window
to ungrab.
In 2.1, we should probably change this API to SDL_GrabInput(win) and
SDL_UngrabInput(void), or something.
This extension allows the user to specify whether a full flush is performed when making a context not current.
The only way to set this currently is at context creation, so this patch provides that functionality.
Defualt behaviour is set at FLUSH, as per the spec.
This patch does not contain the changes to WGL, appleGL or other platforms as I do not have access to GL 4.5 hardware on those platforms.
Full details on the use of KHR_context_flush_control can be found here:
https://www.opengl.org/registry/specs/KHR/context_flush_control.txt
This fills in the core pieces and fully implements it for Mac OS X.
Most other platforms, at the moment, will report a disconnected device if
it fails to write audio, but don't notice if the system's device list changed
at all.
64-bit Linux uses a "long" instead of "long long" for 64-bit ints.
Added a special-case this so SDL_PRI?64 doesn't trigger compiler warnings
when used with SDL's 64-bit datatypes on 64-bit Linux.
Yes this seems confusing as on mac+linux Long is either 32 or 64bits depending on the architecture, but this is how the X11 protocol is defined. Thus 5 is the correct value for the nelts here. Not 5 or 10 depending on the architecture.
More info on the confusion https://bugs.freedesktop.org/show_bug.cgi?id=16802
- Added new custom launch screen code. It uses the launch screen nib when available on iOS 8+, the launch images dictionary if the launch screen nib isn't available, and the old standard image names if the launch image dictionary isn't in the plist.
The launch screen is now hidden during the first call to SDL_PumpEvents rather than SDL_CreateWindow so apps can have the launch screen still visible if they do time-consuming loading after creating their window. It also fades out in roughly the same way as the system launch screen behavior.
It can be disabled by setting the SDL_IPHONE_LAUNCHSCREEN define in SDL_config_iphoneos.h to 0.
- A blank UIView is now created and displayed when the window is first created. The old behavior was to defer creating any view until SDL_GL_CreateContext, which prevented rotation, touch events, and other windowing-related things from working until then. This also makes it easier to use SDL_GetWindowWMInfo after creating a window.
- Moved the keyboard and animation callback code from SDL's UIView subclasses to its UIViewController subclass, which lets them work properly in all cases when a SDL window is valid, even before SDL_GL_CreateContext is called and after SDL_GL_DeleteContext is called.
- SDL_GL_CreateContext, SDL_GL_SwapWindow, SDL_GL_MakeCurrent, and SDL_GL_DeleteContext are more robust.
- Fixed some edge cases where SDL windows weren't rotating properly or their reported sizes were out of sync with their actual sizes.
- Removed all calls to [UIApplication setStatusBarOrientation:]. It doesn't seem to work as expected in all cases in recent iOS versions.
- Some code style cleanup.
Jonas Kulla
The configure script didn't differentiate between Linux and Android, unconditionally compiling in the unix implementation of SDL_sysfilesystem.c.
I'm probably one of the very few people building SDL for android using classic configure + standalone toolchain, so this has gone undetected all along.
This is a little macro magic to use malloc() directly instead of SDL_malloc(),
etc, so static analysis tests that know about the C runtime can function
properly, and understand that we are dealing with heap allocations, etc.
This changed our static analysis report from 5 outstanding bugs to 30.
5x as many bugs were hidden by SDL_malloc() not being recognized as malloc()
by the static analyzer!
SDL_WinRTRunApp() is used on WinRT to launch a main(int, char **)-style
function. It has optional, and experimental support for launching content
inside a XAML control, backed by a main() function running on a separate thread.
This is provided via it's 2nd parameter, which can be a pointer to a XAML
control. (If NULL, XAML support will not be used.)
This change renames the experimental feature's parameter (to SDL_WinRTRunApp())
as "reserved", until such time as the functionality is ready for use. It will
likely be renamed again in the future, when running SDL on top of a XAML control
via a separate thread, becomes reasonably usable.
Sam Lantinga
Ryan C. Gordon
Philipp Wiesemann
Brandon Schaefer
Thomas Perl
Ethan Lee
Alex Szpakowski
Eric Wing
David Ludwig
andrewb
Alfred Reynolds
Joseba Garc?a Etxebarria
Marc Di Luzio
Edward Rudd