Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
Albert Casals
On a RaspberryPI, it might become convenient to specify the Dispmanx layer SDL uses.
Currently, it is hardcoded to be 10000 to sit above most applications.
This can be specially useful when integrating other graphical apps and frameworks like OMXplayer, QT5 etc.. in order to have more flexibility on their Z-order.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
C.W. Betts
Swift is very strict with types, so much that those of different signedness/size must be cast. Most of the defines are imported as 32-bit signed integers, while the corresponding field in a struct is a 32-bit unsigned integer. Appending a "u" would cause the defined types to be imported as 32-bit unsigned integers.
joe.gsoc16
I recently looked into Unicode support in SDL2 and realized that
SDL_TEXTEDITING doesn't get triggered at all (Japanese IME).
According to others on IRC it works fine on Windows/Mac but not
for me on (arch)Linux.
When compiling SDL with autotools, IBus support is enabled by
default but not so with CMake.
I never used CMake before but got it working and also included
that pkg-config determines flags for dbus (FIXME in CMakeLists).
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
Simon Hug
The current SDL_SaveBMP_RW function that saves surfaces to a BMP uses an old bitmap header which doesn't officially support alpha channels. Applications just ignore the byte where the alpha is stored. This can easily be extended by using a newer header version and setting the alpha mask.
The attached patch has these changes:
- Extending the description of the function in the SDL_surface.h header with the supported formats.
- Refining when surfaces get stored to a 32-bit BMP. (Must have bit depth of 8 or higher and must have an alpha mask or colorkey.)
- Fixing a small bug that saves 24-bit BGR surfaces with a colorkey in a 24-bit BMP.
- Adding code that switches to the bitmap header version 4 if the surface has an alpha mask or colorkey. (I chose version 4 because Microsoft didn't lose its documentation behind a file cabinet like they did with version 3.)
- Adding a hint that can disable the use of the version 4 header. This is for people that need the legacy header or like the old behavior better. (I'm not sure about the hint name, though. May need changing if there are any rules to that.)
Kai Sterker
There are already patches available from mingw64 that fix the issue
https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-SDL2
With those applied, I could compile SDL2 without problems. But of course, it would be preferable if SDL built cleanly from source.
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
This is for corner cases where a multi-window app is activated and wants to
make a decision about where focus should go.
This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.
This lets windows know when they are dropping a mouse event because their
hit test reported something other than SDL_HITTEST_NORMAL. It lets them know
exactly where in the event queue this happened.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This is currently implemented for X11, Cocoa, Windows, and DirectFB.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This allows an app to know when a set of drops are coming in a grouping of
some sort (for example, a user selected multiple files and dropped them all
on the window with a single drag), and when that set is complete.
This also adds a window ID to the drop events, so the app can determine to
which window a given drop was delivered. For application-level drops (for
example, you launched an app by dropping a file on its icon), the window ID
will be zero.
Specifically: always on top, skip taskbar, tooltip, utility, and popup menu.
This is currently only implemented for X11.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
Sam Lantinga
Ethan Lee
Philipp Wiesemann
Ryan C. Gordon
Alex Szpakowski