2008-07-25 16:56:23 -06:00
/*
* Copyright 2006 - 2007 Advanced Micro Devices , Inc .
*
* Permission is hereby granted , free of charge , to any person obtaining a
* copy of this software and associated documentation files ( the " Software " ) ,
* to deal in the Software without restriction , including without limitation
* the rights to use , copy , modify , merge , publish , distribute , sublicense ,
* and / or sell copies of the Software , and to permit persons to whom the
* Software is furnished to do so , subject to the following conditions :
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software .
*
* THE SOFTWARE IS PROVIDED " AS IS " , WITHOUT WARRANTY OF ANY KIND , EXPRESS OR
* IMPLIED , INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY ,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT . IN NO EVENT SHALL
* THE COPYRIGHT HOLDER ( S ) OR AUTHOR ( S ) BE LIABLE FOR ANY CLAIM , DAMAGES OR
* OTHER LIABILITY , WHETHER IN AN ACTION OF CONTRACT , TORT OR OTHERWISE ,
* ARISING FROM , OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE .
*/
/****************************************************************************/
/*Portion I: Definitions shared between VBIOS and Driver */
/****************************************************************************/
# ifndef _ATOMBIOS_H
# define _ATOMBIOS_H
# define ATOM_VERSION_MAJOR 0x00020000
# define ATOM_VERSION_MINOR 0x00000002
# define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR)
/* Endianness should be specified before inclusion,
* default to little endian
*/
# ifndef ATOM_BIG_ENDIAN
# error Endian not specified
# endif
# ifdef _H2INC
# ifndef ULONG
typedef unsigned long ULONG ;
# endif
# ifndef UCHAR
typedef unsigned char UCHAR ;
# endif
# ifndef USHORT
typedef unsigned short USHORT ;
# endif
# endif
# define ATOM_DAC_A 0
# define ATOM_DAC_B 1
# define ATOM_EXT_DAC 2
# define ATOM_CRTC1 0
# define ATOM_CRTC2 1
# define ATOM_DIGA 0
# define ATOM_DIGB 1
# define ATOM_PPLL1 0
# define ATOM_PPLL2 1
# define ATOM_SCALER1 0
# define ATOM_SCALER2 1
# define ATOM_SCALER_DISABLE 0
# define ATOM_SCALER_CENTER 1
# define ATOM_SCALER_EXPANSION 2
# define ATOM_SCALER_MULTI_EX 3
# define ATOM_DISABLE 0
# define ATOM_ENABLE 1
# define ATOM_LCD_BLOFF (ATOM_DISABLE+2)
# define ATOM_LCD_BLON (ATOM_ENABLE+2)
# define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3)
# define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
# define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
# define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
# define ATOM_BLANKING 1
# define ATOM_BLANKING_OFF 0
# define ATOM_CURSOR1 0
# define ATOM_CURSOR2 1
# define ATOM_ICON1 0
# define ATOM_ICON2 1
# define ATOM_CRT1 0
# define ATOM_CRT2 1
# define ATOM_TV_NTSC 1
# define ATOM_TV_NTSCJ 2
# define ATOM_TV_PAL 3
# define ATOM_TV_PALM 4
# define ATOM_TV_PALCN 5
# define ATOM_TV_PALN 6
# define ATOM_TV_PAL60 7
# define ATOM_TV_SECAM 8
# define ATOM_TV_CV 16
# define ATOM_DAC1_PS2 1
# define ATOM_DAC1_CV 2
# define ATOM_DAC1_NTSC 3
# define ATOM_DAC1_PAL 4
# define ATOM_DAC2_PS2 ATOM_DAC1_PS2
# define ATOM_DAC2_CV ATOM_DAC1_CV
# define ATOM_DAC2_NTSC ATOM_DAC1_NTSC
# define ATOM_DAC2_PAL ATOM_DAC1_PAL
# define ATOM_PM_ON 0
# define ATOM_PM_STANDBY 1
# define ATOM_PM_SUSPEND 2
# define ATOM_PM_OFF 3
/* Bit0:{=0:single, =1:dual},
Bit1 { = 0 : 666 RGB , = 1 : 888 RGB } ,
Bit2 : 3 : { Grey level }
Bit4 : { = 0 : LDI format for RGB888 , = 1 FPDI format for RGB888 } */
# define ATOM_PANEL_MISC_DUAL 0x00000001
# define ATOM_PANEL_MISC_888RGB 0x00000002
# define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C
# define ATOM_PANEL_MISC_FPDI 0x00000010
# define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2
# define ATOM_PANEL_MISC_SPATIAL 0x00000020
# define ATOM_PANEL_MISC_TEMPORAL 0x00000040
# define ATOM_PANEL_MISC_API_ENABLED 0x00000080
# define MEMTYPE_DDR1 "DDR1"
# define MEMTYPE_DDR2 "DDR2"
# define MEMTYPE_DDR3 "DDR3"
# define MEMTYPE_DDR4 "DDR4"
# define ASIC_BUS_TYPE_PCI "PCI"
# define ASIC_BUS_TYPE_AGP "AGP"
# define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS"
/* Maximum size of that FireGL flag string */
# define ATOM_FIREGL_FLAG_STRING "FGL" //Flag used to enable FireGL Support
# define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 //sizeof( ATOM_FIREGL_FLAG_STRING )
# define ATOM_FAKE_DESKTOP_STRING "DSK" //Flag used to enable mobile ASIC on Desktop
# define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING
# define ATOM_M54T_FLAG_STRING "M54T" //Flag used to enable M54T Support
# define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 //sizeof( ATOM_M54T_FLAG_STRING )
# define HW_ASSISTED_I2C_STATUS_FAILURE 2
# define HW_ASSISTED_I2C_STATUS_SUCCESS 1
# pragma pack(1) /* BIOS data must use byte aligment */
/* Define offset to location of ROM header. */
# define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
# define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L
# define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94
# define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */
# define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f
# define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e
/* Common header for all ROM Data tables.
Every table pointed _ATOM_MASTER_DATA_TABLE has this common header .
And the pointer actually points to this header . */
typedef struct _ATOM_COMMON_TABLE_HEADER
{
USHORT usStructureSize ;
UCHAR ucTableFormatRevision ; /*Change it when the Parser is not backward compatible */
UCHAR ucTableContentRevision ; /*Change it only when the table needs to change but the firmware */
/*Image can't be updated, while Driver needs to carry the new table! */
} ATOM_COMMON_TABLE_HEADER ;
typedef struct _ATOM_ROM_HEADER
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR uaFirmWareSignature [ 4 ] ; /*Signature to distinguish between Atombios and non-atombios,
atombios should init it as " ATOM " , don ' t change the position */
USHORT usBiosRuntimeSegmentAddress ;
USHORT usProtectedModeInfoOffset ;
USHORT usConfigFilenameOffset ;
USHORT usCRC_BlockOffset ;
USHORT usBIOS_BootupMessageOffset ;
USHORT usInt10Offset ;
USHORT usPciBusDevInitCode ;
USHORT usIoBaseAddress ;
USHORT usSubsystemVendorID ;
USHORT usSubsystemID ;
USHORT usPCI_InfoOffset ;
USHORT usMasterCommandTableOffset ; /*Offset for SW to get all command table offsets, Don't change the position */
USHORT usMasterDataTableOffset ; /*Offset for SW to get all data table offsets, Don't change the position */
UCHAR ucExtendedFunctionCode ;
UCHAR ucReserved ;
} ATOM_ROM_HEADER ;
/*==============================Command Table Portion==================================== */
# ifdef UEFI_BUILD
# define UTEMP USHORT
# define USHORT void*
# endif
typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES {
USHORT ASIC_Init ; //Function Table, used by various SW components,latest version 1.1
USHORT GetDisplaySurfaceSize ; //Atomic Table, Used by Bios when enabling HW ICON
USHORT ASIC_RegistersInit ; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
USHORT VRAM_BlockVenderDetection ; //Atomic Table, used only by Bios
USHORT DIGxEncoderControl ; //Only used by Bios
USHORT MemoryControllerInit ; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
USHORT EnableCRTCMemReq ; //Function Table,directly used by various SW components,latest version 2.1
USHORT MemoryParamAdjust ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed
USHORT DVOEncoderControl ; //Function Table,directly used by various SW components,latest version 1.2
USHORT GPIOPinControl ; //Atomic Table, only used by Bios
USHORT SetEngineClock ; //Function Table,directly used by various SW components,latest version 1.1
USHORT SetMemoryClock ; //Function Table,directly used by various SW components,latest version 1.1
USHORT SetPixelClock ; //Function Table,directly used by various SW components,latest version 1.2
USHORT DynamicClockGating ; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
USHORT ResetMemoryDLL ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT ResetMemoryDevice ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT MemoryPLLInit ;
USHORT AdjustDisplayPll ; //only used by Bios
USHORT AdjustMemoryController ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT EnableASIC_StaticPwrMgt ; //Atomic Table, only used by Bios
USHORT ASIC_StaticPwrMgtStatusChange ; //Obsolete , only used by Bios
USHORT DAC_LoadDetection ; //Atomic Table, directly used by various SW components,latest version 1.2
USHORT LVTMAEncoderControl ; //Atomic Table,directly used by various SW components,latest version 1.3
USHORT LCD1OutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DAC1EncoderControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DAC2EncoderControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DVOOutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT CV1OutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT GetConditionalGoldenSetting ; //only used by Bios
USHORT TVEncoderControl ; //Function Table,directly used by various SW components,latest version 1.1
USHORT TMDSAEncoderControl ; //Atomic Table, directly used by various SW components,latest version 1.3
USHORT LVDSEncoderControl ; //Atomic Table, directly used by various SW components,latest version 1.3
USHORT TV1OutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT EnableScaler ; //Atomic Table, used only by Bios
USHORT BlankCRTC ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT EnableCRTC ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT GetPixelClock ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT EnableVGA_Render ; //Function Table,directly used by various SW components,latest version 1.1
USHORT EnableVGA_Access ; //Obsolete , only used by Bios
USHORT SetCRTC_Timing ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT SetCRTC_OverScan ; //Atomic Table, used by various SW components,latest version 1.1
USHORT SetCRTC_Replication ; //Atomic Table, used only by Bios
USHORT SelectCRTC_Source ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT EnableGraphSurfaces ; //Atomic Table, used only by Bios
USHORT UpdateCRTC_DoubleBufferRegisters ;
USHORT LUT_AutoFill ; //Atomic Table, only used by Bios
USHORT EnableHW_IconCursor ; //Atomic Table, only used by Bios
USHORT GetMemoryClock ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT GetEngineClock ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT SetCRTC_UsingDTDTiming ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT ExternalEncoderControl ; //Atomic Table, directly used by various SW components,latest version 2.1
USHORT LVTMAOutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
2008-11-09 22:37:51 -07:00
USHORT VRAM_BlockDetectionByStrap ; //Atomic Table, used only by Bios
2008-07-25 16:56:23 -06:00
USHORT MemoryCleanUp ; //Atomic Table, only used by Bios
USHORT ProcessI2cChannelTransaction ; //Function Table,only used by Bios
USHORT WriteOneByteToHWAssistedI2C ; //Function Table,indirectly used by various SW components
USHORT ReadHWAssistedI2CStatus ; //Atomic Table, indirectly used by various SW components
USHORT SpeedFanControl ; //Function Table,indirectly used by various SW components,called from ASIC_Init
USHORT PowerConnectorDetection ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT MC_Synchronization ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT ComputeMemoryEnginePLL ; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock
USHORT MemoryRefreshConversion ; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock
2008-11-09 22:37:51 -07:00
USHORT VRAM_GetCurrentInfoBlock ; //Atomic Table, used only by Bios
2008-07-25 16:56:23 -06:00
USHORT DynamicMemorySettings ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
2008-11-09 22:37:51 -07:00
USHORT MemoryTraining ; //Atomic Table, used only by Bios
2008-07-25 16:56:23 -06:00
USHORT EnableSpreadSpectrumOnPPLL ; //Atomic Table, directly used by various SW components,latest version 1.2
USHORT TMDSAOutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT SetVoltage ; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
USHORT DAC1OutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DAC2OutputControl ; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT SetupHWAssistedI2CStatus ; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
USHORT ClockSource ; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
USHORT MemoryDeviceInit ; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT EnableYUV ; //Atomic Table, indirectly used by various SW components,called from EnableVGARender
USHORT DIG1EncoderControl ; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT DIG2EncoderControl ; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT DIG1TransmitterControl ; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT DIG2TransmitterControl ; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT ProcessAuxChannelTransaction ; //Function Table,only used by Bios
USHORT DPEncoderService ; //Function Table,only used by Bios
} ATOM_MASTER_LIST_OF_COMMAND_TABLES ;
2008-11-09 22:37:51 -07:00
// For backward compatible
2008-07-25 16:56:23 -06:00
# define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
# define UNIPHYTransmitterControl DIG1TransmitterControl
# define LVTMATransmitterControl DIG2TransmitterControl
2008-11-09 22:37:51 -07:00
# define SetCRTC_DPM_State GetConditionalGoldenSetting
# define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MASTER_COMMAND_TABLE
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables ;
} ATOM_MASTER_COMMAND_TABLE ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used in every command table
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_TABLE_ATTRIBUTE
{
# if ATOM_BIG_ENDIAN
USHORT UpdatedByUtility : 1 ; //[15]=Table updated by utility flag
USHORT PS_SizeInBytes : 7 ; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
USHORT WS_SizeInBytes : 8 ; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
# else
USHORT WS_SizeInBytes : 8 ; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
USHORT PS_SizeInBytes : 7 ; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
USHORT UpdatedByUtility : 1 ; //[15]=Table updated by utility flag
# endif
} ATOM_TABLE_ATTRIBUTE ;
typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS
{
ATOM_TABLE_ATTRIBUTE sbfAccess ;
USHORT susAccess ;
} ATOM_TABLE_ATTRIBUTE_ACCESS ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
2008-07-25 16:56:23 -06:00
// Common header for all command tables.
2008-11-09 22:37:51 -07:00
// Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header.
// And the pointer actually points to this header.
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
{
ATOM_COMMON_TABLE_HEADER CommonHeader ;
ATOM_TABLE_ATTRIBUTE TableAttribute ;
} ATOM_COMMON_ROM_COMMAND_TABLE_HEADER ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by ComputeMemoryEnginePLLTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
# define COMPUTE_MEMORY_PLL_PARAM 1
# define COMPUTE_ENGINE_PLL_PARAM 2
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
{
ULONG ulClock ; //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div
UCHAR ucAction ; //0:reserved //1:Memory //2:Engine
UCHAR ucReserved ; //may expand to return larger Fbdiv later
UCHAR ucFbDiv ; //return value
UCHAR ucPostDiv ; //return value
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS ;
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2
{
ULONG ulClock ; //When return, [23:0] return real clock
UCHAR ucAction ; //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register
USHORT usFbDiv ; //return Feedback value to be written to register
UCHAR ucPostDiv ; //return post div to be written to register
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 ;
# define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
# define SET_CLOCK_FREQ_MASK 0x00FFFFFF //Clock change tables only take bit [23:0] as the requested clock value
# define USE_NON_BUS_CLOCK_MASK 0x01000000 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
# define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
# define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
# define FIRST_TIME_CHANGE_CLOCK 0x08000000 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
# define SKIP_SW_PROGRAM_PLL 0x10000000 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
# define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK
# define b3USE_NON_BUS_CLOCK_MASK 0x01 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa)
# define b3USE_MEMORY_SELF_REFRESH 0x02 //Only applicable to memory clock change, when set, using memory self refresh during clock transition
# define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change
# define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup
# define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL
2008-11-09 22:37:51 -07:00
typedef struct _ATOM_COMPUTE_CLOCK_FREQ
{
# if ATOM_BIG_ENDIAN
ULONG ulComputeClockFlag : 8 ; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
ULONG ulClockFreq : 24 ; // in unit of 10kHz
# else
ULONG ulClockFreq : 24 ; // in unit of 10kHz
ULONG ulComputeClockFlag : 8 ; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM
# endif
} ATOM_COMPUTE_CLOCK_FREQ ;
typedef struct _ATOM_S_MPLL_FB_DIVIDER
{
USHORT usFbDivFrac ;
USHORT usFbDiv ;
} ATOM_S_MPLL_FB_DIVIDER ;
typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3
{
union
{
ATOM_COMPUTE_CLOCK_FREQ ulClock ; //Input Parameter
ATOM_S_MPLL_FB_DIVIDER ulFbDiv ; //Output Parameter
} ;
UCHAR ucRefDiv ; //Output Parameter
UCHAR ucPostDiv ; //Output Parameter
UCHAR ucCntlFlag ; //Output Parameter
UCHAR ucReserved ;
} COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 ;
// ucCntlFlag
# define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1
# define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2
# define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4
typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
{
ATOM_COMPUTE_CLOCK_FREQ ulClock ;
ULONG ulReserved [ 2 ] ;
} DYNAMICE_MEMORY_SETTINGS_PARAMETER ;
typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER
{
ATOM_COMPUTE_CLOCK_FREQ ulClock ;
ULONG ulMemoryClock ;
ULONG ulReserved ;
} DYNAMICE_ENGINE_SETTINGS_PARAMETER ;
/****************************************************************************/
// Structures used by SetEngineClockTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SET_ENGINE_CLOCK_PARAMETERS
{
ULONG ulTargetEngineClock ; //In 10Khz unit
} SET_ENGINE_CLOCK_PARAMETERS ;
typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION
{
ULONG ulTargetEngineClock ; //In 10Khz unit
COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved ;
} SET_ENGINE_CLOCK_PS_ALLOCATION ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by SetMemoryClockTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SET_MEMORY_CLOCK_PARAMETERS
{
ULONG ulTargetMemoryClock ; //In 10Khz unit
} SET_MEMORY_CLOCK_PARAMETERS ;
typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION
{
ULONG ulTargetMemoryClock ; //In 10Khz unit
COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved ;
} SET_MEMORY_CLOCK_PS_ALLOCATION ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by ASIC_Init.ctb
/****************************************************************************/
typedef struct _ASIC_INIT_PARAMETERS
{
ULONG ulDefaultEngineClock ; //In 10Khz unit
ULONG ulDefaultMemoryClock ; //In 10Khz unit
} ASIC_INIT_PARAMETERS ;
2008-07-25 16:56:23 -06:00
typedef struct _ASIC_INIT_PS_ALLOCATION
{
ASIC_INIT_PARAMETERS sASICInitClocks ;
SET_ENGINE_CLOCK_PS_ALLOCATION sReserved ; //Caller doesn't need to init this structure
} ASIC_INIT_PS_ALLOCATION ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used by DynamicClockGatingTable.ctb
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
{
UCHAR ucEnable ; // ATOM_ENABLE or ATOM_DISABLE
UCHAR ucPadding [ 3 ] ;
} DYNAMIC_CLOCK_GATING_PARAMETERS ;
# define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used by EnableASIC_StaticPwrMgtTable.ctb
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
{
UCHAR ucEnable ; // ATOM_ENABLE or ATOM_DISABLE
UCHAR ucPadding [ 3 ] ;
} ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS ;
# define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by DAC_LoadDetectionTable.ctb
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _DAC_LOAD_DETECTION_PARAMETERS
{
USHORT usDeviceID ; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT}
UCHAR ucDacType ; //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC}
UCHAR ucMisc ; //Valid only when table revision =1.3 and above
} DAC_LOAD_DETECTION_PARAMETERS ;
// DAC_LOAD_DETECTION_PARAMETERS.ucMisc
# define DAC_LOAD_MISC_YPrPb 0x01
typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION
{
DAC_LOAD_DETECTION_PARAMETERS sDacload ;
ULONG Reserved [ 2 ] ; // Don't set this one, allocation for EXT DAC
} DAC_LOAD_DETECTION_PS_ALLOCATION ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _DAC_ENCODER_CONTROL_PARAMETERS
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
UCHAR ucDacStandard ; // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0)
UCHAR ucAction ; // 0: turn off encoder
// 1: setup and turn on encoder
// 7: ATOM_ENCODER_INIT Initialize DAC
} DAC_ENCODER_CONTROL_PARAMETERS ;
# define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by DIG1EncoderControlTable
// DIG2EncoderControlTable
// ExternalEncoderControlTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
UCHAR ucConfig ;
// [2] Link Select:
// =0: PHY linkA if bfLane<3
// =1: PHY linkB if bfLanes<3
// =0: PHY linkA+B if bfLanes=3
// [3] Transmitter Sel
// =0: UNIPHY or PCIEPHY
// =1: LVTMA
UCHAR ucAction ; // =0: turn off encoder
// =1: turn on encoder
UCHAR ucEncoderMode ;
// =0: DP encoder
// =1: LVDS encoder
// =2: DVI encoder
// =3: HDMI encoder
// =4: SDVO encoder
UCHAR ucLaneNum ; // how many lanes to enable
UCHAR ucReserved [ 2 ] ;
} DIG_ENCODER_CONTROL_PARAMETERS ;
# define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS
# define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS
//ucConfig
# define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01
# define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00
# define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01
# define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04
# define ATOM_ENCODER_CONFIG_LINKA 0x00
# define ATOM_ENCODER_CONFIG_LINKB 0x04
# define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA
# define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB
# define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08
# define ATOM_ENCODER_CONFIG_UNIPHY 0x00
# define ATOM_ENCODER_CONFIG_LVTMA 0x08
# define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00
# define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08
# define ATOM_ENCODER_CONFIG_DIGB 0x80 // VBIOS Internal use, outside SW should set this bit=0
// ucAction
// ATOM_ENABLE: Enable Encoder
// ATOM_DISABLE: Disable Encoder
//ucEncoderMode
# define ATOM_ENCODER_MODE_DP 0
# define ATOM_ENCODER_MODE_LVDS 1
# define ATOM_ENCODER_MODE_DVI 2
# define ATOM_ENCODER_MODE_HDMI 3
# define ATOM_ENCODER_MODE_SDVO 4
# define ATOM_ENCODER_MODE_TV 13
# define ATOM_ENCODER_MODE_CV 14
# define ATOM_ENCODER_MODE_CRT 15
2008-11-09 22:37:51 -07:00
typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
{
# if ATOM_BIG_ENDIAN
UCHAR ucReserved1 : 2 ;
UCHAR ucTransmitterSel : 2 ; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
UCHAR ucLinkSel : 1 ; // =0: linkA/C/E =1: linkB/D/F
UCHAR ucReserved : 1 ;
UCHAR ucDPLinkRate : 1 ; // =0: 1.62Ghz, =1: 2.7Ghz
# else
UCHAR ucDPLinkRate : 1 ; // =0: 1.62Ghz, =1: 2.7Ghz
UCHAR ucReserved : 1 ;
UCHAR ucLinkSel : 1 ; // =0: linkA/C/E =1: linkB/D/F
UCHAR ucTransmitterSel : 2 ; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF
UCHAR ucReserved1 : 2 ;
# endif
} ATOM_DIG_ENCODER_CONFIG_V2 ;
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
ATOM_DIG_ENCODER_CONFIG_V2 acConfig ;
UCHAR ucAction ;
UCHAR ucEncoderMode ;
// =0: DP encoder
// =1: LVDS encoder
// =2: DVI encoder
// =3: HDMI encoder
// =4: SDVO encoder
UCHAR ucLaneNum ; // how many lanes to enable
UCHAR ucReserved [ 2 ] ;
} DIG_ENCODER_CONTROL_PARAMETERS_V2 ;
//ucConfig
# define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01
# define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00
# define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01
# define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04
# define ATOM_ENCODER_CONFIG_V2_LINKA 0x00
# define ATOM_ENCODER_CONFIG_V2_LINKB 0x04
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08
# define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10
/****************************************************************************/
// Structures used by UNIPHYTransmitterControlTable
// LVTMATransmitterControlTable
// DVOOutputControlTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_DP_VS_MODE
{
UCHAR ucLaneSel ;
UCHAR ucLaneSet ;
} ATOM_DP_VS_MODE ;
typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS
{
union
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
USHORT usInitInfo ; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
ATOM_DP_VS_MODE asMode ; // DP Voltage swing mode
} ;
UCHAR ucConfig ;
// [0]=0: 4 lane Link,
// =1: 8 lane Link ( Dual Links TMDS )
// [1]=0: InCoherent mode
// =1: Coherent Mode
// [2] Link Select:
// =0: PHY linkA if bfLane<3
// =1: PHY linkB if bfLanes<3
// =0: PHY linkA+B if bfLanes=3
// [5:4]PCIE lane Sel
// =0: lane 0~3 or 0~7
// =1: lane 4~7
// =2: lane 8~11 or 8~15
// =3: lane 12~15
UCHAR ucAction ; // =0: turn off encoder
// =1: turn on encoder
UCHAR ucReserved [ 4 ] ;
} DIG_TRANSMITTER_CONTROL_PARAMETERS ;
# define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS
//ucInitInfo
# define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff
//ucConfig
# define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01
# define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02
# define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04
# define ATOM_TRANSMITTER_CONFIG_LINKA 0x00
# define ATOM_TRANSMITTER_CONFIG_LINKB 0x04
# define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00
# define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04
# define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
# define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
# define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20
# define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30
# define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0
# define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00
# define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00
# define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40
# define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80
# define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80
# define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0
//ucAction
# define ATOM_TRANSMITTER_ACTION_DISABLE 0
# define ATOM_TRANSMITTER_ACTION_ENABLE 1
# define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2
# define ATOM_TRANSMITTER_ACTION_LCD_BLON 3
# define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4
# define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5
# define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6
# define ATOM_TRANSMITTER_ACTION_INIT 7
# define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8
# define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9
# define ATOM_TRANSMITTER_ACTION_SETUP 10
# define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11
2008-11-09 22:37:51 -07:00
// Following are used for DigTransmitterControlTable ver1.2
typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2
{
# if ATOM_BIG_ENDIAN
UCHAR ucTransmitterSel : 2 ; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
// =1 Dig Transmitter 2 ( Uniphy CD )
// =2 Dig Transmitter 3 ( Uniphy EF )
UCHAR ucReserved : 1 ;
UCHAR fDPConnector : 1 ; //bit4=0: DP connector =1: None DP connector
UCHAR ucEncoderSel : 1 ; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
UCHAR ucLinkSel : 1 ; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
// =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
UCHAR fCoherentMode : 1 ; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
UCHAR fDualLinkConnector : 1 ; //bit0=1: Dual Link DVI connector
# else
UCHAR fDualLinkConnector : 1 ; //bit0=1: Dual Link DVI connector
UCHAR fCoherentMode : 1 ; //bit1=1: Coherent Mode ( for DVI/HDMI mode )
UCHAR ucLinkSel : 1 ; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
// =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
UCHAR ucEncoderSel : 1 ; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 )
UCHAR fDPConnector : 1 ; //bit4=0: DP connector =1: None DP connector
UCHAR ucReserved : 1 ;
UCHAR ucTransmitterSel : 2 ; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
// =1 Dig Transmitter 2 ( Uniphy CD )
// =2 Dig Transmitter 3 ( Uniphy EF )
# endif
} ATOM_DIG_TRANSMITTER_CONFIG_V2 ;
//ucConfig
//Bit0
# define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01
//Bit1
# define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02
//Bit2
# define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04
# define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00
# define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04
// Bit3
# define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08
# define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
# define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP
// Bit4
# define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10
// Bit7:6
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD
# define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF
typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2
{
union
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
USHORT usInitInfo ; // when init uniphy,lower 8bit is used for connector type defined in objectid.h
ATOM_DP_VS_MODE asMode ; // DP Voltage swing mode
} ;
ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig ;
UCHAR ucAction ; // define as ATOM_TRANSMITER_ACTION_XXX
UCHAR ucReserved [ 4 ] ;
} DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 ;
/****************************************************************************/
// Structures used by DAC1OuputControlTable
// DAC2OuputControlTable
// LVTMAOutputControlTable (Before DEC30)
// TMDSAOutputControlTable (Before DEC30)
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
{
UCHAR ucAction ; // Possible input:ATOM_ENABLE||ATOMDISABLE
// When the display is LCD, in addition to above:
// ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START||
// ATOM_LCD_SELFTEST_STOP
UCHAR aucPadding [ 3 ] ; // padding to DWORD aligned
} DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS ;
# define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION
# define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS
# define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION
# define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by BlankCRTCTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _BLANK_CRTC_PARAMETERS
{
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucBlanking ; // ATOM_BLANKING or ATOM_BLANKINGOFF
USHORT usBlackColorRCr ;
USHORT usBlackColorGY ;
USHORT usBlackColorBCb ;
} BLANK_CRTC_PARAMETERS ;
# define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by EnableCRTCTable
// EnableCRTCMemReqTable
// UpdateCRTC_DoubleBufferRegistersTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ENABLE_CRTC_PARAMETERS
{
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucEnable ; // ATOM_ENABLE or ATOM_DISABLE
UCHAR ucPadding [ 2 ] ;
} ENABLE_CRTC_PARAMETERS ;
# define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by SetCRTC_OverScanTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SET_CRTC_OVERSCAN_PARAMETERS
{
USHORT usOverscanRight ; // right
USHORT usOverscanLeft ; // left
USHORT usOverscanBottom ; // bottom
USHORT usOverscanTop ; // top
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucPadding [ 3 ] ;
} SET_CRTC_OVERSCAN_PARAMETERS ;
# define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by SetCRTC_ReplicationTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SET_CRTC_REPLICATION_PARAMETERS
{
UCHAR ucH_Replication ; // horizontal replication
UCHAR ucV_Replication ; // vertical replication
UCHAR usCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucPadding ;
} SET_CRTC_REPLICATION_PARAMETERS ;
# define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by SelectCRTC_SourceTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SELECT_CRTC_SOURCE_PARAMETERS
{
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucDevice ; // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|....
UCHAR ucPadding [ 2 ] ;
} SELECT_CRTC_SOURCE_PARAMETERS ;
# define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS
typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2
{
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucEncoderID ; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO
UCHAR ucEncodeMode ; // Encoding mode, only valid when using DIG1/DIG2/DVO
UCHAR ucPadding ;
} SELECT_CRTC_SOURCE_PARAMETERS_V2 ;
//ucEncoderID
//#define ASIC_INT_DAC1_ENCODER_ID 0x00
//#define ASIC_INT_TV_ENCODER_ID 0x02
//#define ASIC_INT_DIG1_ENCODER_ID 0x03
//#define ASIC_INT_DAC2_ENCODER_ID 0x04
//#define ASIC_EXT_TV_ENCODER_ID 0x06
//#define ASIC_INT_DVO_ENCODER_ID 0x07
//#define ASIC_INT_DIG2_ENCODER_ID 0x09
//#define ASIC_EXT_DIG_ENCODER_ID 0x05
//ucEncodeMode
//#define ATOM_ENCODER_MODE_DP 0
//#define ATOM_ENCODER_MODE_LVDS 1
//#define ATOM_ENCODER_MODE_DVI 2
//#define ATOM_ENCODER_MODE_HDMI 3
//#define ATOM_ENCODER_MODE_SDVO 4
//#define ATOM_ENCODER_MODE_TV 13
//#define ATOM_ENCODER_MODE_CV 14
//#define ATOM_ENCODER_MODE_CRT 15
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by SetPixelClockTable
// GetPixelClockTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
//Major revision=1., Minor revision=1
typedef struct _PIXEL_CLOCK_PARAMETERS
{
USHORT usPixelClock ; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
// 0 means disable PPLL
USHORT usRefDiv ; // Reference divider
USHORT usFbDiv ; // feedback divider
UCHAR ucPostDiv ; // post divider
UCHAR ucFracFbDiv ; // fractional feedback divider
UCHAR ucPpll ; // ATOM_PPLL1 or ATOM_PPL2
UCHAR ucRefDivSrc ; // ATOM_PJITTER or ATO_NONPJITTER
UCHAR ucCRTC ; // Which CRTC uses this Ppll
UCHAR ucPadding ;
} PIXEL_CLOCK_PARAMETERS ;
//Major revision=1., Minor revision=2, add ucMiscIfno
//ucMiscInfo:
# define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1
# define MISC_DEVICE_INDEX_MASK 0xF0
# define MISC_DEVICE_INDEX_SHIFT 4
typedef struct _PIXEL_CLOCK_PARAMETERS_V2
{
USHORT usPixelClock ; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
// 0 means disable PPLL
USHORT usRefDiv ; // Reference divider
USHORT usFbDiv ; // feedback divider
UCHAR ucPostDiv ; // post divider
UCHAR ucFracFbDiv ; // fractional feedback divider
UCHAR ucPpll ; // ATOM_PPLL1 or ATOM_PPL2
UCHAR ucRefDivSrc ; // ATOM_PJITTER or ATO_NONPJITTER
UCHAR ucCRTC ; // Which CRTC uses this Ppll
UCHAR ucMiscInfo ; // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog
} PIXEL_CLOCK_PARAMETERS_V2 ;
//Major revision=1., Minor revision=3, structure/definition change
//ucEncoderMode:
//ATOM_ENCODER_MODE_DP
//ATOM_ENOCDER_MODE_LVDS
//ATOM_ENOCDER_MODE_DVI
//ATOM_ENOCDER_MODE_HDMI
//ATOM_ENOCDER_MODE_SDVO
//ATOM_ENCODER_MODE_TV 13
//ATOM_ENCODER_MODE_CV 14
//ATOM_ENCODER_MODE_CRT 15
//ucDVOConfig
//#define DVO_ENCODER_CONFIG_RATE_SEL 0x01
//#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
//#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
//#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
//#define DVO_ENCODER_CONFIG_LOW12BIT 0x00
//#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
//#define DVO_ENCODER_CONFIG_24BIT 0x08
//ucMiscInfo: also changed, see below
# define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01
# define PIXEL_CLOCK_MISC_VGA_MODE 0x02
# define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04
# define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00
# define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04
# define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08
typedef struct _PIXEL_CLOCK_PARAMETERS_V3
{
USHORT usPixelClock ; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
// 0 means disable PPLL. For VGA PPLL,make sure this value is not 0.
USHORT usRefDiv ; // Reference divider
USHORT usFbDiv ; // feedback divider
UCHAR ucPostDiv ; // post divider
UCHAR ucFracFbDiv ; // fractional feedback divider
UCHAR ucPpll ; // ATOM_PPLL1 or ATOM_PPL2
UCHAR ucTransmitterId ; // graphic encoder id defined in objectId.h
union
{
UCHAR ucEncoderMode ; // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/
UCHAR ucDVOConfig ; // when use DVO, need to know SDR/DDR, 12bit or 24bit
} ;
UCHAR ucMiscInfo ; // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel
// bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source
} PIXEL_CLOCK_PARAMETERS_V3 ;
# define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2
# define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by AdjustDisplayPllTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
{
USHORT usPixelClock ;
UCHAR ucTransmitterID ;
UCHAR ucEncodeMode ;
union
{
UCHAR ucDVOConfig ; //if DVO, need passing link rate and output 12bitlow or 24bit
UCHAR ucConfig ; //if none DVO, not defined yet
} ;
UCHAR ucReserved [ 3 ] ;
} ADJUST_DISPLAY_PLL_PARAMETERS ;
# define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10
# define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by EnableYUVTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ENABLE_YUV_PARAMETERS
{
UCHAR ucEnable ; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB)
UCHAR ucCRTC ; // Which CRTC needs this YUV or RGB format
UCHAR ucPadding [ 2 ] ;
} ENABLE_YUV_PARAMETERS ;
# define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by GetMemoryClockTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _GET_MEMORY_CLOCK_PARAMETERS
{
ULONG ulReturnMemoryClock ; // current memory speed in 10KHz unit
} GET_MEMORY_CLOCK_PARAMETERS ;
# define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by GetEngineClockTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _GET_ENGINE_CLOCK_PARAMETERS
{
ULONG ulReturnEngineClock ; // current engine speed in 10KHz unit
} GET_ENGINE_CLOCK_PARAMETERS ;
# define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Following Structures and constant may be obsolete
/****************************************************************************/
2008-07-25 16:56:23 -06:00
//Maxium 8 bytes,the data read in will be placed in the parameter space.
//Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
{
USHORT usPrescale ; //Ratio between Engine clock and I2C clock
USHORT usVRAMAddress ; //Adress in Frame Buffer where to pace raw EDID
USHORT usStatus ; //When use output: lower byte EDID checksum, high byte hardware status
//WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
UCHAR ucSlaveAddr ; //Read from which slave
UCHAR ucLineNumber ; //Read from which HW assisted line
} READ_EDID_FROM_HW_I2C_DATA_PARAMETERS ;
# define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
# define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0
# define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1
# define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2
# define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3
# define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4
typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
{
USHORT usPrescale ; //Ratio between Engine clock and I2C clock
USHORT usByteOffset ; //Write to which byte
//Upper portion of usByteOffset is Format of data
//1bytePS+offsetPS
//2bytesPS+offsetPS
//blockID+offsetPS
//blockID+offsetID
//blockID+counterID+offsetID
UCHAR ucData ; //PS data1
UCHAR ucStatus ; //Status byte 1=success, 2=failure, Also is used as PS data2
UCHAR ucSlaveAddr ; //Write to which slave
UCHAR ucLineNumber ; //Write from which HW assisted line
} WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS ;
# define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
{
USHORT usPrescale ; //Ratio between Engine clock and I2C clock
UCHAR ucSlaveAddr ; //Write to which slave
UCHAR ucLineNumber ; //Write from which HW assisted line
} SET_UP_HW_I2C_DATA_PARAMETERS ;
/**************************************************************************/
# define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by PowerConnectorDetectionTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS
{
UCHAR ucPowerConnectorStatus ; //Used for return value 0: detected, 1:not detected
UCHAR ucPwrBehaviorId ;
USHORT usPwrBudget ; //how much power currently boot to in unit of watt
} POWER_CONNECTOR_DETECTION_PARAMETERS ;
typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION
{
UCHAR ucPowerConnectorStatus ; //Used for return value 0: detected, 1:not detected
UCHAR ucReserved ;
USHORT usPwrBudget ; //how much power currently boot to in unit of watt
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ;
} POWER_CONNECTOR_DETECTION_PS_ALLOCATION ;
/****************************LVDS SS Command Table Definitions**********************/
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by EnableSpreadSpectrumOnPPLLTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ENABLE_LVDS_SS_PARAMETERS
{
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
UCHAR ucSpreadSpectrumStepSize_Delay ; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY
UCHAR ucEnable ; //ATOM_ENABLE or ATOM_DISABLE
UCHAR ucPadding [ 3 ] ;
} ENABLE_LVDS_SS_PARAMETERS ;
//ucTableFormatRevision=1,ucTableContentRevision=2
typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2
{
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
UCHAR ucSpreadSpectrumStep ; //
UCHAR ucEnable ; //ATOM_ENABLE or ATOM_DISABLE
UCHAR ucSpreadSpectrumDelay ;
UCHAR ucSpreadSpectrumRange ;
UCHAR ucPadding ;
} ENABLE_LVDS_SS_PARAMETERS_V2 ;
//This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS.
typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL
{
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
UCHAR ucSpreadSpectrumStep ; //
UCHAR ucEnable ; // ATOM_ENABLE or ATOM_DISABLE
UCHAR ucSpreadSpectrumDelay ;
UCHAR ucSpreadSpectrumRange ;
UCHAR ucPpll ; // ATOM_PPLL1/ATOM_PPLL2
} ENABLE_SPREAD_SPECTRUM_ON_PPLL ;
# define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL
/**************************************************************************/
typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION
{
PIXEL_CLOCK_PARAMETERS sPCLKInput ;
ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved ; //Caller doesn't need to init this portion
} SET_PIXEL_CLOCK_PS_ALLOCATION ;
# define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by ###
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _MEMORY_TRAINING_PARAMETERS
{
ULONG ulTargetMemoryClock ; //In 10Khz unit
} MEMORY_TRAINING_PARAMETERS ;
# define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS
/****************************LVDS and other encoder command table definitions **********************/
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by LVDSEncoderControlTable (Before DCE30)
// LVTMAEncoderControlTable (Before DCE30)
// TMDSAEncoderControlTable (Before DCE30)
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
UCHAR ucMisc ; // bit0=0: Enable single link
// =1: Enable dual link
// Bit1=0: 666RGB
// =1: 888RGB
UCHAR ucAction ; // 0: turn off encoder
// 1: setup and turn on encoder
} LVDS_ENCODER_CONTROL_PARAMETERS ;
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS
# define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS
# define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS
//ucTableFormatRevision=1,ucTableContentRevision=2
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
UCHAR ucMisc ; // see PANEL_ENCODER_MISC_xx defintions below
UCHAR ucAction ; // 0: turn off encoder
// 1: setup and turn on encoder
UCHAR ucTruncate ; // bit0=0: Disable truncate
// =1: Enable truncate
// bit4=0: 666RGB
// =1: 888RGB
UCHAR ucSpatial ; // bit0=0: Disable spatial dithering
// =1: Enable spatial dithering
// bit4=0: 666RGB
// =1: 888RGB
UCHAR ucTemporal ; // bit0=0: Disable temporal dithering
// =1: Enable temporal dithering
// bit4=0: 666RGB
// =1: 888RGB
// bit5=0: Gray level 2
// =1: Gray level 4
UCHAR ucFRC ; // bit4=0: 25FRC_SEL pattern E
// =1: 25FRC_SEL pattern F
// bit6:5=0: 50FRC_SEL pattern A
// =1: 50FRC_SEL pattern B
// =2: 50FRC_SEL pattern C
// =3: 50FRC_SEL pattern D
// bit7=0: 75FRC_SEL pattern E
// =1: 75FRC_SEL pattern F
} LVDS_ENCODER_CONTROL_PARAMETERS_V2 ;
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2
2008-11-09 22:37:51 -07:00
# define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3
/****************************************************************************/
// Structures used by ###
/****************************************************************************/
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS
{
UCHAR ucEnable ; // Enable or Disable External TMDS encoder
UCHAR ucMisc ; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB}
UCHAR ucPadding [ 2 ] ;
} ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS ;
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION
{
ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; //Caller doesn't need to init this portion
} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ;
2008-07-25 16:56:23 -06:00
# define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2
typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2
{
ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; //Caller doesn't need to init this portion
} ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 ;
2008-11-09 22:37:51 -07:00
typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION
{
DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ;
} EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION ;
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by DVOEncoderControlTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
//ucTableFormatRevision=1,ucTableContentRevision=3
//ucDVOConfig:
# define DVO_ENCODER_CONFIG_RATE_SEL 0x01
# define DVO_ENCODER_CONFIG_DDR_SPEED 0x00
# define DVO_ENCODER_CONFIG_SDR_SPEED 0x01
# define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c
# define DVO_ENCODER_CONFIG_LOW12BIT 0x00
# define DVO_ENCODER_CONFIG_UPPER12BIT 0x04
# define DVO_ENCODER_CONFIG_24BIT 0x08
typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3
{
USHORT usPixelClock ;
UCHAR ucDVOConfig ;
UCHAR ucAction ; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
UCHAR ucReseved [ 4 ] ;
} DVO_ENCODER_CONTROL_PARAMETERS_V3 ;
# define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3
//ucTableFormatRevision=1
//ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for
// bit1=0: non-coherent mode
// =1: coherent mode
//==========================================================================================
//Only change is here next time when changing encoder parameter definitions again!
# define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST
# define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST
# define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3
# define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST
# define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS
# define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION
//==========================================================================================
# define PANEL_ENCODER_MISC_DUAL 0x01
# define PANEL_ENCODER_MISC_COHERENT 0x02
# define PANEL_ENCODER_MISC_TMDS_LINKB 0x04
# define PANEL_ENCODER_MISC_HDMI_TYPE 0x08
# define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE
# define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE
# define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1)
# define PANEL_ENCODER_TRUNCATE_EN 0x01
# define PANEL_ENCODER_TRUNCATE_DEPTH 0x10
# define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01
# define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10
# define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01
# define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10
# define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20
# define PANEL_ENCODER_25FRC_MASK 0x10
# define PANEL_ENCODER_25FRC_E 0x00
# define PANEL_ENCODER_25FRC_F 0x10
# define PANEL_ENCODER_50FRC_MASK 0x60
# define PANEL_ENCODER_50FRC_A 0x00
# define PANEL_ENCODER_50FRC_B 0x20
# define PANEL_ENCODER_50FRC_C 0x40
# define PANEL_ENCODER_50FRC_D 0x60
# define PANEL_ENCODER_75FRC_MASK 0x80
# define PANEL_ENCODER_75FRC_E 0x00
# define PANEL_ENCODER_75FRC_F 0x80
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by SetVoltageTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
# define SET_VOLTAGE_TYPE_ASIC_VDDC 1
# define SET_VOLTAGE_TYPE_ASIC_MVDDC 2
# define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3
# define SET_VOLTAGE_TYPE_ASIC_VDDCI 4
2008-11-09 22:37:51 -07:00
# define SET_VOLTAGE_INIT_MODE 5
# define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic
2008-07-25 16:56:23 -06:00
# define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1
# define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2
# define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4
2008-11-09 22:37:51 -07:00
# define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0
# define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1
# define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2
2008-07-25 16:56:23 -06:00
typedef struct _SET_VOLTAGE_PARAMETERS
{
UCHAR ucVoltageType ; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
UCHAR ucVoltageMode ; // To set all, to set source A or source B or ...
UCHAR ucVoltageIndex ; // An index to tell which voltage level
UCHAR ucReserved ;
} SET_VOLTAGE_PARAMETERS ;
typedef struct _SET_VOLTAGE_PARAMETERS_V2
{
UCHAR ucVoltageType ; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ
UCHAR ucVoltageMode ; // Not used, maybe use for state machine for differen power mode
USHORT usVoltageLevel ; // real voltage level
} SET_VOLTAGE_PARAMETERS_V2 ;
typedef struct _SET_VOLTAGE_PS_ALLOCATION
{
SET_VOLTAGE_PARAMETERS sASICSetVoltage ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ;
} SET_VOLTAGE_PS_ALLOCATION ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used by TVEncoderControlTable
/****************************************************************************/
typedef struct _TV_ENCODER_CONTROL_PARAMETERS
{
USHORT usPixelClock ; // in 10KHz; for bios convenient
UCHAR ucTvStandard ; // See definition "ATOM_TV_NTSC ..."
UCHAR ucAction ; // 0: turn off encoder
// 1: setup and turn on encoder
} TV_ENCODER_CONTROL_PARAMETERS ;
2008-07-25 16:56:23 -06:00
typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION
{
TV_ENCODER_CONTROL_PARAMETERS sTVEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; // Don't set this one
} TV_ENCODER_CONTROL_PS_ALLOCATION ;
//==============================Data Table Portion====================================
# ifdef UEFI_BUILD
# define UTEMP USHORT
# define USHORT void*
# endif
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in Data.mtb
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
{
USHORT UtilityPipeLine ; // Offest for the utility to get parser info,Don't change this position!
USHORT MultimediaCapabilityInfo ; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios
USHORT MultimediaConfigInfo ; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
USHORT StandardVESA_Timing ; // Only used by Bios
USHORT FirmwareInfo ; // Shared by various SW components,latest version 1.4
USHORT DAC_Info ; // Will be obsolete from R600
USHORT LVDS_Info ; // Shared by various SW components,latest version 1.1
USHORT TMDS_Info ; // Will be obsolete from R600
USHORT AnalogTV_Info ; // Shared by various SW components,latest version 1.1
USHORT SupportedDevicesInfo ; // Will be obsolete from R600
USHORT GPIO_I2C_Info ; // Shared by various SW components,latest version 1.2 will be used from R600
USHORT VRAM_UsageByFirmware ; // Shared by various SW components,latest version 1.3 will be used from R600
USHORT GPIO_Pin_LUT ; // Shared by various SW components,latest version 1.1
USHORT VESA_ToInternalModeLUT ; // Only used by Bios
USHORT ComponentVideoInfo ; // Shared by various SW components,latest version 2.1 will be used from R600
USHORT PowerPlayInfo ; // Shared by various SW components,latest version 2.1,new design from R600
USHORT CompassionateData ; // Will be obsolete from R600
USHORT SaveRestoreInfo ; // Only used by Bios
USHORT PPLL_SS_Info ; // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info
USHORT OemInfo ; // Defined and used by external SW, should be obsolete soon
USHORT XTMDS_Info ; // Will be obsolete from R600
USHORT MclkSS_Info ; // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used
USHORT Object_Header ; // Shared by various SW components,latest version 1.1
USHORT IndirectIOAccess ; // Only used by Bios,this table position can't change at all!!
USHORT MC_InitParameter ; // Only used by command table
USHORT ASIC_VDDC_Info ; // Will be obsolete from R600
USHORT ASIC_InternalSS_Info ; // New tabel name from R600, used to be called "ASIC_MVDDC_Info"
USHORT TV_VideoMode ; // Only used by command table
USHORT VRAM_Info ; // Only used by command table, latest version 1.3
USHORT MemoryTrainingInfo ; // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1
USHORT IntegratedSystemInfo ; // Shared by various SW components
USHORT ASIC_ProfilingInfo ; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
USHORT VoltageObjectInfo ; // Shared by various SW components, latest version 1.1
USHORT PowerSourceInfo ; // Shared by various SW components, latest versoin 1.1
} ATOM_MASTER_LIST_OF_DATA_TABLES ;
# ifdef UEFI_BUILD
# define USHORT UTEMP
# endif
typedef struct _ATOM_MASTER_DATA_TABLE
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables ;
} ATOM_MASTER_DATA_TABLE ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in MultimediaCapabilityInfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulSignature ; // HW info table signature string "$ATI"
UCHAR ucI2C_Type ; // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc)
UCHAR ucTV_OutInfo ; // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7)
UCHAR ucVideoPortInfo ; // Provides the video port capabilities
UCHAR ucHostPortInfo ; // Provides host port configuration information
} ATOM_MULTIMEDIA_CAPABILITY_INFO ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in MultimediaConfigInfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulSignature ; // MM info table signature sting "$MMT"
UCHAR ucTunerInfo ; // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5)
UCHAR ucAudioChipInfo ; // List the audio chip type (3:0) product type (4) and OEM revision (7:5)
UCHAR ucProductID ; // Defines as OEM ID or ATI board ID dependent on product type setting
UCHAR ucMiscInfo1 ; // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7)
UCHAR ucMiscInfo2 ; // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6)
UCHAR ucMiscInfo3 ; // Video Decoder Type (3:0) Video In Standard/Crystal (7:4)
UCHAR ucMiscInfo4 ; // Video Decoder Host Config (2:0) reserved (7:3)
UCHAR ucVideoInput0Info ; // Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
UCHAR ucVideoInput1Info ; // Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
UCHAR ucVideoInput2Info ; // Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
UCHAR ucVideoInput3Info ; // Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
UCHAR ucVideoInput4Info ; // Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
} ATOM_MULTIMEDIA_CONFIG_INFO ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used in FirmwareInfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
// usBIOSCapability Defintion:
// Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted;
// Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported;
// Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported;
// Others: Reserved
# define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001
# define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002
# define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004
# define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008
# define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010
# define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020
# define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040
# define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080
# define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100
# define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00
# define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000
# define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000
# ifndef _H2INC
//Please don't add or expand this bitfield structure below, this one will retire soon.!
typedef struct _ATOM_FIRMWARE_CAPABILITY
{
# if ATOM_BIG_ENDIAN
USHORT Reserved : 3 ;
USHORT HyperMemory_Size : 4 ;
USHORT HyperMemory_Support : 1 ;
USHORT PPMode_Assigned : 1 ;
USHORT WMI_SUPPORT : 1 ;
USHORT GPUControlsBL : 1 ;
USHORT EngineClockSS_Support : 1 ;
USHORT MemoryClockSS_Support : 1 ;
USHORT ExtendedDesktopSupport : 1 ;
USHORT DualCRTC_Support : 1 ;
USHORT FirmwarePosted : 1 ;
# else
USHORT FirmwarePosted : 1 ;
USHORT DualCRTC_Support : 1 ;
USHORT ExtendedDesktopSupport : 1 ;
USHORT MemoryClockSS_Support : 1 ;
USHORT EngineClockSS_Support : 1 ;
USHORT GPUControlsBL : 1 ;
USHORT WMI_SUPPORT : 1 ;
USHORT PPMode_Assigned : 1 ;
USHORT HyperMemory_Support : 1 ;
USHORT HyperMemory_Size : 4 ;
USHORT Reserved : 3 ;
# endif
} ATOM_FIRMWARE_CAPABILITY ;
typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
{
ATOM_FIRMWARE_CAPABILITY sbfAccess ;
USHORT susAccess ;
} ATOM_FIRMWARE_CAPABILITY_ACCESS ;
# else
typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS
{
USHORT susAccess ;
} ATOM_FIRMWARE_CAPABILITY_ACCESS ;
# endif
typedef struct _ATOM_FIRMWARE_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; //In 10Khz unit
ULONG ulDefaultMemoryClock ; //In 10Khz unit
ULONG ulDriverTargetEngineClock ; //In 10Khz unit
ULONG ulDriverTargetMemoryClock ; //In 10Khz unit
ULONG ulMaxEngineClockPLL_Output ; //In 10Khz unit
ULONG ulMaxMemoryClockPLL_Output ; //In 10Khz unit
ULONG ulMaxPixelClockPLL_Output ; //In 10Khz unit
ULONG ulASICMaxEngineClock ; //In 10Khz unit
ULONG ulASICMaxMemoryClock ; //In 10Khz unit
UCHAR ucASICMaxTemperature ;
UCHAR ucPadding [ 3 ] ; //Don't use them
ULONG aulReservedForBIOS [ 3 ] ; //Don't use them
USHORT usMinEngineClockPLL_Input ; //In 10Khz unit
USHORT usMaxEngineClockPLL_Input ; //In 10Khz unit
USHORT usMinEngineClockPLL_Output ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMaxMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Output ; //In 10Khz unit
USHORT usMaxPixelClock ; //In 10Khz unit, Max. Pclk
USHORT usMinPixelClockPLL_Input ; //In 10Khz unit
USHORT usMaxPixelClockPLL_Input ; //In 10Khz unit
USHORT usMinPixelClockPLL_Output ; //In 10Khz unit, the definitions above can't change!!!
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; //In 10Khz unit
USHORT usPM_RTS_Location ; //RTS PM4 starting location in ROM in 1Kb unit
UCHAR ucPM_RTS_StreamSize ; //RTS PM4 packets in Kb unit
UCHAR ucDesign_ID ; //Indicate what is the board design
UCHAR ucMemoryModule_ID ; //Indicate what is the board design
} ATOM_FIRMWARE_INFO ;
typedef struct _ATOM_FIRMWARE_INFO_V1_2
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; //In 10Khz unit
ULONG ulDefaultMemoryClock ; //In 10Khz unit
ULONG ulDriverTargetEngineClock ; //In 10Khz unit
ULONG ulDriverTargetMemoryClock ; //In 10Khz unit
ULONG ulMaxEngineClockPLL_Output ; //In 10Khz unit
ULONG ulMaxMemoryClockPLL_Output ; //In 10Khz unit
ULONG ulMaxPixelClockPLL_Output ; //In 10Khz unit
ULONG ulASICMaxEngineClock ; //In 10Khz unit
ULONG ulASICMaxMemoryClock ; //In 10Khz unit
UCHAR ucASICMaxTemperature ;
UCHAR ucMinAllowedBL_Level ;
UCHAR ucPadding [ 2 ] ; //Don't use them
ULONG aulReservedForBIOS [ 2 ] ; //Don't use them
ULONG ulMinPixelClockPLL_Output ; //In 10Khz unit
USHORT usMinEngineClockPLL_Input ; //In 10Khz unit
USHORT usMaxEngineClockPLL_Input ; //In 10Khz unit
USHORT usMinEngineClockPLL_Output ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMaxMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Output ; //In 10Khz unit
USHORT usMaxPixelClock ; //In 10Khz unit, Max. Pclk
USHORT usMinPixelClockPLL_Input ; //In 10Khz unit
USHORT usMaxPixelClockPLL_Input ; //In 10Khz unit
USHORT usMinPixelClockPLL_Output ; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; //In 10Khz unit
USHORT usPM_RTS_Location ; //RTS PM4 starting location in ROM in 1Kb unit
UCHAR ucPM_RTS_StreamSize ; //RTS PM4 packets in Kb unit
UCHAR ucDesign_ID ; //Indicate what is the board design
UCHAR ucMemoryModule_ID ; //Indicate what is the board design
} ATOM_FIRMWARE_INFO_V1_2 ;
typedef struct _ATOM_FIRMWARE_INFO_V1_3
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; //In 10Khz unit
ULONG ulDefaultMemoryClock ; //In 10Khz unit
ULONG ulDriverTargetEngineClock ; //In 10Khz unit
ULONG ulDriverTargetMemoryClock ; //In 10Khz unit
ULONG ulMaxEngineClockPLL_Output ; //In 10Khz unit
ULONG ulMaxMemoryClockPLL_Output ; //In 10Khz unit
ULONG ulMaxPixelClockPLL_Output ; //In 10Khz unit
ULONG ulASICMaxEngineClock ; //In 10Khz unit
ULONG ulASICMaxMemoryClock ; //In 10Khz unit
UCHAR ucASICMaxTemperature ;
UCHAR ucMinAllowedBL_Level ;
UCHAR ucPadding [ 2 ] ; //Don't use them
ULONG aulReservedForBIOS ; //Don't use them
ULONG ul3DAccelerationEngineClock ; //In 10Khz unit
ULONG ulMinPixelClockPLL_Output ; //In 10Khz unit
USHORT usMinEngineClockPLL_Input ; //In 10Khz unit
USHORT usMaxEngineClockPLL_Input ; //In 10Khz unit
USHORT usMinEngineClockPLL_Output ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMaxMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Output ; //In 10Khz unit
USHORT usMaxPixelClock ; //In 10Khz unit, Max. Pclk
USHORT usMinPixelClockPLL_Input ; //In 10Khz unit
USHORT usMaxPixelClockPLL_Input ; //In 10Khz unit
USHORT usMinPixelClockPLL_Output ; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; //In 10Khz unit
USHORT usPM_RTS_Location ; //RTS PM4 starting location in ROM in 1Kb unit
UCHAR ucPM_RTS_StreamSize ; //RTS PM4 packets in Kb unit
UCHAR ucDesign_ID ; //Indicate what is the board design
UCHAR ucMemoryModule_ID ; //Indicate what is the board design
} ATOM_FIRMWARE_INFO_V1_3 ;
typedef struct _ATOM_FIRMWARE_INFO_V1_4
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulFirmwareRevision ;
ULONG ulDefaultEngineClock ; //In 10Khz unit
ULONG ulDefaultMemoryClock ; //In 10Khz unit
ULONG ulDriverTargetEngineClock ; //In 10Khz unit
ULONG ulDriverTargetMemoryClock ; //In 10Khz unit
ULONG ulMaxEngineClockPLL_Output ; //In 10Khz unit
ULONG ulMaxMemoryClockPLL_Output ; //In 10Khz unit
ULONG ulMaxPixelClockPLL_Output ; //In 10Khz unit
ULONG ulASICMaxEngineClock ; //In 10Khz unit
ULONG ulASICMaxMemoryClock ; //In 10Khz unit
UCHAR ucASICMaxTemperature ;
UCHAR ucMinAllowedBL_Level ;
USHORT usBootUpVDDCVoltage ; //In MV unit
USHORT usLcdMinPixelClockPLL_Output ; // In MHz unit
USHORT usLcdMaxPixelClockPLL_Output ; // In MHz unit
ULONG ul3DAccelerationEngineClock ; //In 10Khz unit
ULONG ulMinPixelClockPLL_Output ; //In 10Khz unit
USHORT usMinEngineClockPLL_Input ; //In 10Khz unit
USHORT usMaxEngineClockPLL_Input ; //In 10Khz unit
USHORT usMinEngineClockPLL_Output ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMaxMemoryClockPLL_Input ; //In 10Khz unit
USHORT usMinMemoryClockPLL_Output ; //In 10Khz unit
USHORT usMaxPixelClock ; //In 10Khz unit, Max. Pclk
USHORT usMinPixelClockPLL_Input ; //In 10Khz unit
USHORT usMaxPixelClockPLL_Input ; //In 10Khz unit
USHORT usMinPixelClockPLL_Output ; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output
ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability ;
USHORT usReferenceClock ; //In 10Khz unit
USHORT usPM_RTS_Location ; //RTS PM4 starting location in ROM in 1Kb unit
UCHAR ucPM_RTS_StreamSize ; //RTS PM4 packets in Kb unit
UCHAR ucDesign_ID ; //Indicate what is the board design
UCHAR ucMemoryModule_ID ; //Indicate what is the board design
} ATOM_FIRMWARE_INFO_V1_4 ;
# define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V1_4
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structures used in IntegratedSystemInfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
# define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2
# define IGP_CAP_FLAG_AC_CARD 0x4
# define IGP_CAP_FLAG_SDVO_CARD 0x8
# define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10
typedef struct _ATOM_INTEGRATED_SYSTEM_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulBootUpEngineClock ; //in 10kHz unit
ULONG ulBootUpMemoryClock ; //in 10kHz unit
ULONG ulMaxSystemMemoryClock ; //in 10kHz unit
ULONG ulMinSystemMemoryClock ; //in 10kHz unit
UCHAR ucNumberOfCyclesInPeriodHi ;
UCHAR ucLCDTimingSel ; //=0:not valid.!=0 sel this timing descriptor from LCD EDID.
USHORT usReserved1 ;
USHORT usInterNBVoltageLow ; //An intermidiate PMW value to set the voltage
USHORT usInterNBVoltageHigh ; //Another intermidiate PMW value to set the voltage
ULONG ulReserved [ 2 ] ;
USHORT usFSBClock ; //In MHz unit
USHORT usCapabilityFlag ; //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable
//Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card
//Bit[4]==1: P/2 mode, ==0: P/1 mode
USHORT usPCIENBCfgReg7 ; //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal
USHORT usK8MemoryClock ; //in MHz unit
USHORT usK8SyncStartDelay ; //in 0.01 us unit
USHORT usK8DataReturnTime ; //in 0.01 us unit
UCHAR ucMaxNBVoltage ;
UCHAR ucMinNBVoltage ;
UCHAR ucMemoryType ; //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved
UCHAR ucNumberOfCyclesInPeriod ; //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod
UCHAR ucStartingPWM_HighTime ; //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime
UCHAR ucHTLinkWidth ; //16 bit vs. 8 bit
UCHAR ucMaxNBVoltageHigh ;
UCHAR ucMinNBVoltageHigh ;
} ATOM_INTEGRATED_SYSTEM_INFO ;
/* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO
ulBootUpMemoryClock : For Intel IGP , it ' s the UMA system memory clock
For AMD IGP , it ' s 0 if no SidePort memory installed or it ' s the boot - up SidePort memory clock
ulMaxSystemMemoryClock : For Intel IGP , it ' s the Max freq from memory SPD if memory runs in ASYNC mode or otherwise ( SYNC mode ) it ' s 0
For AMD IGP , for now this can be 0
ulMinSystemMemoryClock : For Intel IGP , it ' s 133 MHz if memory runs in ASYNC mode or otherwise ( SYNC mode ) it ' s 0
For AMD IGP , for now this can be 0
usFSBClock : For Intel IGP , it ' s FSB Freq
For AMD IGP , it ' s HT Link Speed
usK8MemoryClock : For AMD IGP only . For RevF CPU , set it to 200
usK8SyncStartDelay : For AMD IGP only . Memory access latency in K8 , required for watermark calculation
usK8DataReturnTime : For AMD IGP only . Memory access latency in K8 , required for watermark calculation
VC : Voltage Control
ucMaxNBVoltage : Voltage regulator dependent PWM value . Low 8 bits of the value for the max voltage . Set this one to 0xFF if VC without PWM . Set this to 0x0 if no VC at all .
ucMinNBVoltage : Voltage regulator dependent PWM value . Low 8 bits of the value for the min voltage . Set this one to 0x00 if VC without PWM or no VC at all .
ucNumberOfCyclesInPeriod : Indicate how many cycles when PWM duty is 100 % . low 8 bits of the value .
ucNumberOfCyclesInPeriodHi : Indicate how many cycles when PWM duty is 100 % . high 8 bits of the value . If the PWM has an inverter , set bit [ 7 ] = = 1 , otherwise set it 0
ucMaxNBVoltageHigh : Voltage regulator dependent PWM value . High 8 bits of the value for the max voltage . Set this one to 0xFF if VC without PWM . Set this to 0x0 if no VC at all .
ucMinNBVoltageHigh : Voltage regulator dependent PWM value . High 8 bits of the value for the min voltage . Set this one to 0x00 if VC without PWM or no VC at all .
usInterNBVoltageLow : Voltage regulator dependent PWM value . The value makes the the voltage > = Min NB voltage but < = InterNBVoltageHigh . Set this to 0x0000 if VC without PWM or no VC at all .
usInterNBVoltageHigh : Voltage regulator dependent PWM value . The value makes the the voltage > = InterNBVoltageLow but < = Max NB voltage . Set this to 0x0000 if VC without PWM or no VC at all .
*/
/*
The following IGP table is introduced from RS780 , which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST ;
Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need .
The enough reservation should allow us to never change table revisions . Whenever needed , a GPU SW component can use reserved portion for new data entries .
SW components can access the IGP system infor structure in the same way as before
*/
typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ULONG ulBootUpEngineClock ; //in 10kHz unit
2008-11-09 22:37:51 -07:00
ULONG ulReserved1 [ 2 ] ; //must be 0x0 for the reserved
2008-07-25 16:56:23 -06:00
ULONG ulBootUpUMAClock ; //in 10kHz unit
ULONG ulBootUpSidePortClock ; //in 10kHz unit
ULONG ulMinSidePortClock ; //in 10kHz unit
2008-11-09 22:37:51 -07:00
ULONG ulReserved2 [ 6 ] ; //must be 0x0 for the reserved
2008-07-25 16:56:23 -06:00
ULONG ulSystemConfig ; //see explanation below
ULONG ulBootUpReqDisplayVector ;
ULONG ulOtherDisplayMisc ;
ULONG ulDDISlot1Config ;
ULONG ulDDISlot2Config ;
UCHAR ucMemoryType ; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved
UCHAR ucUMAChannelNumber ;
UCHAR ucDockingPinBit ;
UCHAR ucDockingPinPolarity ;
ULONG ulDockingPinCFGInfo ;
ULONG ulCPUCapInfo ;
USHORT usNumberOfCyclesInPeriod ;
USHORT usMaxNBVoltage ;
USHORT usMinNBVoltage ;
USHORT usBootUpNBVoltage ;
ULONG ulHTLinkFreq ; //in 10Khz
USHORT usMinHTLinkWidth ;
USHORT usMaxHTLinkWidth ;
USHORT usUMASyncStartDelay ;
USHORT usUMADataReturnTime ;
USHORT usLinkStatusZeroTime ;
USHORT usReserved ;
2008-11-09 22:37:51 -07:00
ULONG ulHighVoltageHTLinkFreq ; // in 10Khz
ULONG ulLowVoltageHTLinkFreq ; // in 10Khz
USHORT usMaxUpStreamHTLinkWidth ;
USHORT usMaxDownStreamHTLinkWidth ;
USHORT usMinUpStreamHTLinkWidth ;
USHORT usMinDownStreamHTLinkWidth ;
ULONG ulReserved3 [ 97 ] ; //must be 0x0
2008-07-25 16:56:23 -06:00
} ATOM_INTEGRATED_SYSTEM_INFO_V2 ;
/*
ulBootUpEngineClock : Boot - up Engine Clock in 10 Khz ;
ulBootUpUMAClock : Boot - up UMA Clock in 10 Khz ; it must be 0x0 when UMA is not present
ulBootUpSidePortClock : Boot - up SidePort Clock in 10 Khz ; it must be 0x0 when SidePort Memory is not present , this could be equal to or less than maximum supported Sideport memory clock
ulSystemConfig :
2008-11-09 22:37:51 -07:00
Bit [ 0 ] = 1 : PowerExpress mode = 0 Non - PowerExpress mode ;
Bit [ 1 ] = 1 : system boots up at AMD overdrived state or user customized mode . In this case , driver will just stick to this boot - up mode . No other PowerPlay state
= 0 : system boots up at driver control state . Power state depends on PowerPlay table .
Bit [ 2 ] = 1 : PWM method is used on NB voltage control . = 0 : GPIO method is used .
Bit [ 3 ] = 1 : Only one power state ( Performance ) will be supported .
= 0 : Multiple power states supported from PowerPlay table .
Bit [ 4 ] = 1 : CLMC is supported and enabled on current system .
= 0 : CLMC is not supported or enabled on current system . SBIOS need to support HT link / freq change through ATIF interface .
Bit [ 5 ] = 1 : Enable CDLW for all driver control power states . Max HT width is from SBIOS , while Min HT width is determined by display requirement .
= 0 : CDLW is disabled . If CLMC is enabled case , Min HT width will be set equal to Max HT width . If CLMC disabled case , Max HT width will be applied .
Bit [ 6 ] = 1 : High Voltage requested for all power states . In this case , voltage will be forced at 1.1 v and powerplay table voltage drop / throttling request will be ignored .
= 0 : Voltage settings is determined by powerplay table .
Bit [ 7 ] = 1 : Enable CLMC as hybrid Mode . CDLD and CILR will be disabled in this case and we ' re using legacy C1E . This is workaround for CPU ( Griffin ) performance issue .
= 0 : Enable CLMC as regular mode , CDLD and CILR will be enabled .
2008-07-25 16:56:23 -06:00
ulBootUpReqDisplayVector : This dword is a bit vector indicates what display devices are requested during boot - up . Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions .
ulOtherDisplayMisc : [ 15 : 8 ] - Bootup LCD Expansion selection ; 0 - center , 1 - full panel size expansion ;
[ 7 : 0 ] - BootupTV standard selection ; This is a bit vector to indicate what TV standards are supported by the system . Refer to ucTVSuppportedStd definition ;
ulDDISlot1Config : Describes the PCIE lane configuration on this DDI PCIE slot ( ADD2 card ) or connector ( Mobile design ) .
[ 3 : 0 ] - Bit vector to indicate PCIE lane config of the DDI slot / connector on chassis ( bit 0 = 1 lane 3 : 0 ; bit 1 = 1 lane 7 : 4 ; bit 2 = 1 lane 11 : 8 ; bit 3 = 1 lane 15 : 12 )
[ 7 : 4 ] - Bit vector to indicate PCIE lane config of the same DDI slot / connector on docking station ( bit 0 = 1 lane 3 : 0 ; bit 1 = 1 lane 7 : 4 ; bit 2 = 1 lane 11 : 8 ; bit 3 = 1 lane 15 : 12 )
[ 15 : 8 ] - Lane configuration attribute ;
[ 23 : 16 ] - Connector type , possible value :
CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D
CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D
CONNECTOR_OBJECT_ID_HDMI_TYPE_A
CONNECTOR_OBJECT_ID_DISPLAYPORT
[ 31 : 24 ] - Reserved
ulDDISlot2Config : Same as Slot1 .
ucMemoryType : SidePort memory type , set it to 0x0 when Sideport memory is not installed . Driver needs this info to change sideport memory clock . Not for display in CCC .
For IGP , Hypermemory is the only memory type showed in CCC .
ucUMAChannelNumber : how many channels for the UMA ;
ulDockingPinCFGInfo : [ 15 : 0 ] - Bus / Device / Function # to CFG to read this Docking Pin ; [ 31 : 16 ] - reg offset in CFG to read this pin
ucDockingPinBit : which bit in this register to read the pin status ;
ucDockingPinPolarity : Polarity of the pin when docked ;
ulCPUCapInfo : [ 7 : 0 ] = 1 : Griffin ; [ 7 : 0 ] = 2 : Greyhound ; [ 7 : 0 ] = 3 : K8 , other bits reserved for now and must be 0x0
2008-11-09 22:37:51 -07:00
2008-07-25 16:56:23 -06:00
usNumberOfCyclesInPeriod : Indicate how many cycles when PWM duty is 100 % .
2008-11-09 22:37:51 -07:00
usMaxNBVoltage : Max . voltage control value in either PWM or GPIO mode .
usMinNBVoltage : Min . voltage control value in either PWM or GPIO mode .
GPIO mode : both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig . SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE = 0
PWM mode : both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig . SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE = 1
GPU SW don ' t control mode : usMaxNBVoltage & usMinNBVoltage = 0 and no care about ulSystemConfig . SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE
2008-07-25 16:56:23 -06:00
usBootUpNBVoltage : Boot - up voltage regulator dependent PWM value .
2008-11-09 22:37:51 -07:00
ulHTLinkFreq : Bootup HT link Frequency in 10 Khz .
usMinHTLinkWidth : Bootup minimum HT link width . If CDLW disabled , this is equal to usMaxHTLinkWidth .
If CDLW enabled , both upstream and downstream width should be the same during bootup .
usMaxHTLinkWidth : Bootup maximum HT link width . If CDLW disabled , this is equal to usMinHTLinkWidth .
If CDLW enabled , both upstream and downstream width should be the same during bootup .
2008-07-25 16:56:23 -06:00
usUMASyncStartDelay : Memory access latency , required for watermark calculation
usUMADataReturnTime : Memory access latency , required for watermark calculation
usLinkStatusZeroTime : Memory access latency required for watermark calculation , set this to 0x0 for K8 CPU , set a proper value in 0.01 the unit of us
for Griffin or Greyhound . SBIOS needs to convert to actual time by :
if T0Ttime [ 5 : 4 ] = 00 b , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 0.1 us ( 0.0 to 1.5 us )
if T0Ttime [ 5 : 4 ] = 01 b , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 0.5 us ( 0.0 to 7.5 us )
if T0Ttime [ 5 : 4 ] = 10 b , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 2.0 us ( 0.0 to 30u s )
if T0Ttime [ 5 : 4 ] = 11 b , and T0Ttime [ 3 : 0 ] = 0x0 to 0xa , then usLinkStatusZeroTime = T0Ttime [ 3 : 0 ] * 20u s ( 0.0 to 200u s )
2008-11-09 22:37:51 -07:00
ulHighVoltageHTLinkFreq : HT link frequency for power state with low voltage . If boot up runs in HT1 , this must be 0.
This must be less than or equal to ulHTLinkFreq ( bootup frequency ) .
ulLowVoltageHTLinkFreq : HT link frequency for power state with low voltage or voltage scaling 1.0 v ~ 1.1 v . If boot up runs in HT1 , this must be 0.
This must be less than or equal to ulHighVoltageHTLinkFreq .
usMaxUpStreamHTLinkWidth : Asymmetric link width support in the future , to replace usMaxHTLinkWidth . Not used for now .
usMaxDownStreamHTLinkWidth : same as above .
usMinUpStreamHTLinkWidth : Asymmetric link width support in the future , to replace usMinHTLinkWidth . Not used for now .
usMinDownStreamHTLinkWidth : same as above .
2008-07-25 16:56:23 -06:00
*/
2008-11-09 22:37:51 -07:00
2008-07-25 16:56:23 -06:00
# define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
# define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
2008-11-09 22:37:51 -07:00
# define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004
# define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008
# define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010
# define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020
# define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040
# define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080
2008-07-25 16:56:23 -06:00
# define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF
# define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F
# define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0
# define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01
# define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02
# define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04
# define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08
# define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00
# define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100
# define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01
# define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000
# define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000
# define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001
# define ATOM_TV_INT_ENCODER1_INDEX 0x00000002
# define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003
# define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004
# define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005
# define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006
# define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007
# define ATOM_CV_INT_ENCODER1_INDEX 0x00000008
# define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009
# define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A
# define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B
# define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C
# define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D
// define ASIC internal encoder id ( bit vector )
# define ASIC_INT_DAC1_ENCODER_ID 0x00
# define ASIC_INT_TV_ENCODER_ID 0x02
# define ASIC_INT_DIG1_ENCODER_ID 0x03
# define ASIC_INT_DAC2_ENCODER_ID 0x04
# define ASIC_EXT_TV_ENCODER_ID 0x06
# define ASIC_INT_DVO_ENCODER_ID 0x07
# define ASIC_INT_DIG2_ENCODER_ID 0x09
# define ASIC_EXT_DIG_ENCODER_ID 0x05
//define Encoder attribute
# define ATOM_ANALOG_ENCODER 0
# define ATOM_DIGITAL_ENCODER 1
# define ATOM_DEVICE_CRT1_INDEX 0x00000000
# define ATOM_DEVICE_LCD1_INDEX 0x00000001
# define ATOM_DEVICE_TV1_INDEX 0x00000002
# define ATOM_DEVICE_DFP1_INDEX 0x00000003
# define ATOM_DEVICE_CRT2_INDEX 0x00000004
# define ATOM_DEVICE_LCD2_INDEX 0x00000005
# define ATOM_DEVICE_TV2_INDEX 0x00000006
# define ATOM_DEVICE_DFP2_INDEX 0x00000007
# define ATOM_DEVICE_CV_INDEX 0x00000008
# define ATOM_DEVICE_DFP3_INDEX 0x00000009
2008-11-09 22:37:51 -07:00
# define ATOM_DEVICE_DFP4_INDEX 0x0000000A
# define ATOM_DEVICE_DFP5_INDEX 0x0000000B
2008-07-25 16:56:23 -06:00
# define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C
# define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D
# define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E
# define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F
2008-11-09 22:37:51 -07:00
# define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1)
2008-07-25 16:56:23 -06:00
# define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO
2008-11-09 22:37:51 -07:00
# define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 )
2008-07-25 16:56:23 -06:00
# define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1)
# define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX )
# define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX )
# define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX )
# define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX)
# define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX )
# define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX )
# define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX )
# define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX)
# define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX )
# define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX )
2008-11-09 22:37:51 -07:00
# define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX )
# define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX )
2008-07-25 16:56:23 -06:00
# define ATOM_DEVICE_CRT_SUPPORT ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT
2008-11-09 22:37:51 -07:00
# define ATOM_DEVICE_DFP_SUPPORT ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT
2008-07-25 16:56:23 -06:00
# define ATOM_DEVICE_TV_SUPPORT ATOM_DEVICE_TV1_SUPPORT | ATOM_DEVICE_TV2_SUPPORT
# define ATOM_DEVICE_LCD_SUPPORT ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT
# define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0
# define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004
# define ATOM_DEVICE_CONNECTOR_VGA 0x00000001
# define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002
# define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003
# define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004
# define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005
# define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006
# define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007
# define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008
# define ATOM_DEVICE_CONNECTOR_SCART 0x00000009
# define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A
# define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B
# define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E
# define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F
# define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F
# define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000
# define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000
# define ATOM_DEVICE_DAC_INFO_DACA 0x00000001
# define ATOM_DEVICE_DAC_INFO_DACB 0x00000002
# define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003
# define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000
# define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F
# define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000
# define ATOM_DEVICE_I2C_ID_MASK 0x00000070
# define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004
# define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001
# define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002
# define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 //For IGP RS600
# define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 //For IGP RS690
# define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080
# define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007
# define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000
# define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001
// usDeviceSupport:
// Bits0 = 0 - no CRT1 support= 1- CRT1 is supported
// Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported
// Bit 2 = 0 - no TV1 support= 1- TV1 is supported
// Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported
// Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported
// Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported
// Bit 6 = 0 - no TV2 support= 1- TV2 is supported
// Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported
// Bit 8 = 0 - no CV support= 1- CV is supported
// Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported
// Byte1 (Supported Device Info)
// Bit 0 = = 0 - no CV support= 1- CV is supported
//
//
// ucI2C_ConfigID
// [7:0] - I2C LINE Associate ID
// = 0 - no I2C
// [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection)
// = 0, [6:0]=SW assisted I2C ID
// [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use
// = 2, HW engine for Multimedia use
// = 3-7 Reserved for future I2C engines
// [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
typedef struct _ATOM_I2C_ID_CONFIG
{
# if ATOM_BIG_ENDIAN
UCHAR bfHW_Capable : 1 ;
UCHAR bfHW_EngineID : 3 ;
UCHAR bfI2C_LineMux : 4 ;
# else
UCHAR bfI2C_LineMux : 4 ;
UCHAR bfHW_EngineID : 3 ;
UCHAR bfHW_Capable : 1 ;
# endif
} ATOM_I2C_ID_CONFIG ;
typedef union _ATOM_I2C_ID_CONFIG_ACCESS
{
ATOM_I2C_ID_CONFIG sbfAccess ;
UCHAR ucAccess ;
} ATOM_I2C_ID_CONFIG_ACCESS ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in GPIO_I2C_InfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_GPIO_I2C_ASSIGMENT
{
USHORT usClkMaskRegisterIndex ;
USHORT usClkEnRegisterIndex ;
USHORT usClkY_RegisterIndex ;
USHORT usClkA_RegisterIndex ;
USHORT usDataMaskRegisterIndex ;
USHORT usDataEnRegisterIndex ;
USHORT usDataY_RegisterIndex ;
USHORT usDataA_RegisterIndex ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ;
UCHAR ucClkMaskShift ;
UCHAR ucClkEnShift ;
UCHAR ucClkY_Shift ;
UCHAR ucClkA_Shift ;
UCHAR ucDataMaskShift ;
UCHAR ucDataEnShift ;
UCHAR ucDataY_Shift ;
UCHAR ucDataA_Shift ;
UCHAR ucReserved1 ;
UCHAR ucReserved2 ;
} ATOM_GPIO_I2C_ASSIGMENT ;
typedef struct _ATOM_GPIO_I2C_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info [ ATOM_MAX_SUPPORTED_DEVICE ] ;
} ATOM_GPIO_I2C_INFO ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Common Structure used in other structures
/****************************************************************************/
2008-07-25 16:56:23 -06:00
# ifndef _H2INC
//Please don't add or expand this bitfield structure below, this one will retire soon.!
typedef struct _ATOM_MODE_MISC_INFO
{
# if ATOM_BIG_ENDIAN
USHORT Reserved : 6 ;
USHORT RGB888 : 1 ;
USHORT DoubleClock : 1 ;
USHORT Interlace : 1 ;
USHORT CompositeSync : 1 ;
USHORT V_ReplicationBy2 : 1 ;
USHORT H_ReplicationBy2 : 1 ;
USHORT VerticalCutOff : 1 ;
USHORT VSyncPolarity : 1 ; //0=Active High, 1=Active Low
USHORT HSyncPolarity : 1 ; //0=Active High, 1=Active Low
USHORT HorizontalCutOff : 1 ;
# else
USHORT HorizontalCutOff : 1 ;
USHORT HSyncPolarity : 1 ; //0=Active High, 1=Active Low
USHORT VSyncPolarity : 1 ; //0=Active High, 1=Active Low
USHORT VerticalCutOff : 1 ;
USHORT H_ReplicationBy2 : 1 ;
USHORT V_ReplicationBy2 : 1 ;
USHORT CompositeSync : 1 ;
USHORT Interlace : 1 ;
USHORT DoubleClock : 1 ;
USHORT RGB888 : 1 ;
USHORT Reserved : 6 ;
# endif
} ATOM_MODE_MISC_INFO ;
typedef union _ATOM_MODE_MISC_INFO_ACCESS
{
ATOM_MODE_MISC_INFO sbfAccess ;
USHORT usAccess ;
} ATOM_MODE_MISC_INFO_ACCESS ;
# else
typedef union _ATOM_MODE_MISC_INFO_ACCESS
{
USHORT usAccess ;
} ATOM_MODE_MISC_INFO_ACCESS ;
# endif
// usModeMiscInfo-
# define ATOM_H_CUTOFF 0x01
# define ATOM_HSYNC_POLARITY 0x02 //0=Active High, 1=Active Low
# define ATOM_VSYNC_POLARITY 0x04 //0=Active High, 1=Active Low
# define ATOM_V_CUTOFF 0x08
# define ATOM_H_REPLICATIONBY2 0x10
# define ATOM_V_REPLICATIONBY2 0x20
# define ATOM_COMPOSITESYNC 0x40
# define ATOM_INTERLACE 0x80
# define ATOM_DOUBLE_CLOCK_MODE 0x100
# define ATOM_RGB888_MODE 0x200
//usRefreshRate-
# define ATOM_REFRESH_43 43
# define ATOM_REFRESH_47 47
# define ATOM_REFRESH_56 56
# define ATOM_REFRESH_60 60
# define ATOM_REFRESH_65 65
# define ATOM_REFRESH_70 70
# define ATOM_REFRESH_72 72
# define ATOM_REFRESH_75 75
# define ATOM_REFRESH_85 85
// ATOM_MODE_TIMING data are exactly the same as VESA timing data.
// Translation from EDID to ATOM_MODE_TIMING, use the following formula.
//
// VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK
// = EDID_HA + EDID_HBL
// VESA_HDISP = VESA_ACTIVE = EDID_HA
// VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH
// = EDID_HA + EDID_HSO
// VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW
// VESA_BORDER = EDID_BORDER
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in SetCRTC_UsingDTDTimingTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS
{
USHORT usH_Size ;
USHORT usH_Blanking_Time ;
USHORT usV_Size ;
USHORT usV_Blanking_Time ;
USHORT usH_SyncOffset ;
USHORT usH_SyncWidth ;
USHORT usV_SyncOffset ;
USHORT usV_SyncWidth ;
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
UCHAR ucH_Border ; // From DFP EDID
UCHAR ucV_Border ;
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucPadding [ 3 ] ;
} SET_CRTC_USING_DTD_TIMING_PARAMETERS ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in SetCRTC_TimingTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _SET_CRTC_TIMING_PARAMETERS
{
USHORT usH_Total ; // horizontal total
USHORT usH_Disp ; // horizontal display
USHORT usH_SyncStart ; // horozontal Sync start
USHORT usH_SyncWidth ; // horizontal Sync width
USHORT usV_Total ; // vertical total
USHORT usV_Disp ; // vertical display
USHORT usV_SyncStart ; // vertical Sync start
USHORT usV_SyncWidth ; // vertical Sync width
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
UCHAR ucCRTC ; // ATOM_CRTC1 or ATOM_CRTC2
UCHAR ucOverscanRight ; // right
UCHAR ucOverscanLeft ; // left
UCHAR ucOverscanBottom ; // bottom
UCHAR ucOverscanTop ; // top
UCHAR ucReserved ;
} SET_CRTC_TIMING_PARAMETERS ;
# define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in StandardVESA_TimingTable
// AnalogTV_InfoTable
// ComponentVideoInfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MODE_TIMING
{
USHORT usCRTC_H_Total ;
USHORT usCRTC_H_Disp ;
USHORT usCRTC_H_SyncStart ;
USHORT usCRTC_H_SyncWidth ;
USHORT usCRTC_V_Total ;
USHORT usCRTC_V_Disp ;
USHORT usCRTC_V_SyncStart ;
USHORT usCRTC_V_SyncWidth ;
USHORT usPixelClock ; //in 10Khz unit
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
USHORT usCRTC_OverscanRight ;
USHORT usCRTC_OverscanLeft ;
USHORT usCRTC_OverscanBottom ;
USHORT usCRTC_OverscanTop ;
USHORT usReserve ;
UCHAR ucInternalModeNumber ;
UCHAR ucRefreshRate ;
} ATOM_MODE_TIMING ;
typedef struct _ATOM_DTD_FORMAT
{
USHORT usPixClk ;
USHORT usHActive ;
USHORT usHBlanking_Time ;
USHORT usVActive ;
USHORT usVBlanking_Time ;
USHORT usHSyncOffset ;
USHORT usHSyncWidth ;
USHORT usVSyncOffset ;
USHORT usVSyncWidth ;
USHORT usImageHSize ;
USHORT usImageVSize ;
UCHAR ucHBorder ;
UCHAR ucVBorder ;
ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo ;
UCHAR ucInternalModeNumber ;
UCHAR ucRefreshRate ;
} ATOM_DTD_FORMAT ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in LVDS_InfoTable
// * Need a document to describe this table
/****************************************************************************/
2008-07-25 16:56:23 -06:00
# define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
# define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
# define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
# define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
2008-11-09 22:37:51 -07:00
//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12.
//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL
# define LCDPANEL_CAP_READ_EDID 0x1
2008-07-25 16:56:23 -06:00
//ucTableFormatRevision=1
//ucTableContentRevision=1
typedef struct _ATOM_LVDS_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_DTD_FORMAT sLCDTiming ;
USHORT usModePatchTableOffset ;
USHORT usSupportedRefreshRate ; //Refer to panel info table in ATOMBIOS extension Spec.
USHORT usOffDelayInMs ;
UCHAR ucPowerSequenceDigOntoDEin10Ms ;
UCHAR ucPowerSequenceDEtoBLOnin10Ms ;
UCHAR ucLVDS_Misc ; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
// Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
// Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
// Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
UCHAR ucPanelDefaultRefreshRate ;
UCHAR ucPanelIdentification ;
UCHAR ucSS_Id ;
} ATOM_LVDS_INFO ;
//ucTableFormatRevision=1
//ucTableContentRevision=2
typedef struct _ATOM_LVDS_INFO_V12
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_DTD_FORMAT sLCDTiming ;
USHORT usExtInfoTableOffset ;
USHORT usSupportedRefreshRate ; //Refer to panel info table in ATOMBIOS extension Spec.
USHORT usOffDelayInMs ;
UCHAR ucPowerSequenceDigOntoDEin10Ms ;
UCHAR ucPowerSequenceDEtoBLOnin10Ms ;
UCHAR ucLVDS_Misc ; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level}
// Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}
// Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled}
// Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled}
UCHAR ucPanelDefaultRefreshRate ;
UCHAR ucPanelIdentification ;
UCHAR ucSS_Id ;
USHORT usLCDVenderID ;
USHORT usLCDProductID ;
UCHAR ucLCDPanel_SpecialHandlingCap ;
UCHAR ucPanelInfoSize ; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
UCHAR ucReserved [ 2 ] ;
} ATOM_LVDS_INFO_V12 ;
# define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12
typedef struct _ATOM_PATCH_RECORD_MODE
{
UCHAR ucRecordType ;
USHORT usHDisp ;
USHORT usVDisp ;
} ATOM_PATCH_RECORD_MODE ;
typedef struct _ATOM_LCD_RTS_RECORD
{
UCHAR ucRecordType ;
UCHAR ucRTSValue ;
} ATOM_LCD_RTS_RECORD ;
//!! If the record below exits, it shoud always be the first record for easy use in command table!!!
typedef struct _ATOM_LCD_MODE_CONTROL_CAP
{
UCHAR ucRecordType ;
USHORT usLCDCap ;
} ATOM_LCD_MODE_CONTROL_CAP ;
# define LCD_MODE_CAP_BL_OFF 1
# define LCD_MODE_CAP_CRTC_OFF 2
# define LCD_MODE_CAP_PANEL_OFF 4
typedef struct _ATOM_FAKE_EDID_PATCH_RECORD
{
UCHAR ucRecordType ;
UCHAR ucFakeEDIDLength ;
UCHAR ucFakeEDIDString [ 1 ] ; // This actually has ucFakeEdidLength elements.
} ATOM_FAKE_EDID_PATCH_RECORD ;
typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD
{
UCHAR ucRecordType ;
USHORT usHSize ;
USHORT usVSize ;
} ATOM_PANEL_RESOLUTION_PATCH_RECORD ;
# define LCD_MODE_PATCH_RECORD_MODE_TYPE 1
# define LCD_RTS_RECORD_TYPE 2
# define LCD_CAP_RECORD_TYPE 3
# define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
# define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
# define ATOM_RECORD_END_TYPE 0xFF
/****************************Spread Spectrum Info Table Definitions **********************/
//ucTableFormatRevision=1
//ucTableContentRevision=2
typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT
{
USHORT usSpreadSpectrumPercentage ;
UCHAR ucSpreadSpectrumType ; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD
UCHAR ucSS_Step ;
UCHAR ucSS_Delay ;
UCHAR ucSS_Id ;
UCHAR ucRecommandedRef_Div ;
UCHAR ucSS_Range ; //it was reserved for V11
} ATOM_SPREAD_SPECTRUM_ASSIGNMENT ;
# define ATOM_MAX_SS_ENTRY 16
# define ATOM_DP_SS_ID1 0x0f1 // SS modulation freq=30k
# define ATOM_DP_SS_ID2 0x0f2 // SS modulation freq=33k
# define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000
# define ATOM_SS_DOWN_SPREAD_MODE 0x00000000
# define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001
# define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001
# define ATOM_INTERNAL_SS_MASK 0x00000000
# define ATOM_EXTERNAL_SS_MASK 0x00000002
# define EXEC_SS_STEP_SIZE_SHIFT 2
# define EXEC_SS_DELAY_SHIFT 4
# define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4
typedef struct _ATOM_SPREAD_SPECTRUM_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info [ ATOM_MAX_SS_ENTRY ] ;
} ATOM_SPREAD_SPECTRUM_INFO ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in AnalogTV_InfoTable (Top level)
/****************************************************************************/
2008-07-25 16:56:23 -06:00
//ucTVBootUpDefaultStd definiton:
//ATOM_TV_NTSC 1
//ATOM_TV_NTSCJ 2
//ATOM_TV_PAL 3
//ATOM_TV_PALM 4
//ATOM_TV_PALCN 5
//ATOM_TV_PALN 6
//ATOM_TV_PAL60 7
//ATOM_TV_SECAM 8
//ucTVSuppportedStd definition:
# define NTSC_SUPPORT 0x1
# define NTSCJ_SUPPORT 0x2
# define PAL_SUPPORT 0x4
# define PALM_SUPPORT 0x8
# define PALCN_SUPPORT 0x10
# define PALN_SUPPORT 0x20
# define PAL60_SUPPORT 0x40
# define SECAM_SUPPORT 0x80
# define MAX_SUPPORTED_TV_TIMING 2
typedef struct _ATOM_ANALOG_TV_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucTV_SupportedStandard ;
UCHAR ucTV_BootUpDefaultStandard ;
UCHAR ucExt_TV_ASIC_ID ;
UCHAR ucExt_TV_ASIC_SlaveAddr ;
/*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];*/
ATOM_MODE_TIMING aModeTimings [ MAX_SUPPORTED_TV_TIMING ] ;
} ATOM_ANALOG_TV_INFO ;
/**************************************************************************/
// VRAM usage and their defintions
// One chunk of VRAM used by Bios are for HWICON surfaces,EDID data.
// Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below.
// All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned!
// To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR
// To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
# ifndef VESA_MEMORY_IN_64K_BLOCK
# define VESA_MEMORY_IN_64K_BLOCK 0x100 //256*64K=16Mb (Max. VESA memory is 16Mb!)
# endif
# define ATOM_EDID_RAW_DATASIZE 256 //In Bytes
# define ATOM_HWICON_SURFACE_SIZE 4096 //In Bytes
# define ATOM_HWICON_INFOTABLE_SIZE 32
# define MAX_DTD_MODE_IN_VRAM 6
# define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT)
# define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
# define DFP_ENCODER_TYPE_OFFSET 0x80
# define DP_ENCODER_LANE_NUM_OFFSET 0x84
# define DP_ENCODER_LINK_RATE_OFFSET 0x88
# define ATOM_HWICON1_SURFACE_ADDR 0
# define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
# define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
# define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE)
# define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_TV2_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_TV2_DTD_MODE_TBL_ADDR (ATOM_TV2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_TV2_STD_MODE_TBL_ADDR (ATOM_TV2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP2_EDID_ADDR (ATOM_TV2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
2008-11-09 22:37:51 -07:00
# define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
# define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
# define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)
2008-07-25 16:56:23 -06:00
# define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR+256)
# define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START+512
//The size below is in Kb!
# define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
# define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L
# define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30
# define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1
# define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0
2008-11-09 22:37:51 -07:00
/***********************************************************************************/
// Structure used in VRAM_UsageByFirmwareTable
// Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm
// at running time.
// note2: From RV770, the memory is more than 32bit addressable, so we will change
// ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains
// exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware
// (in offset to start of memory address) is KB aligned instead of byte aligend.
/***********************************************************************************/
2008-07-25 16:56:23 -06:00
# define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
{
ULONG ulStartAddrUsedByFirmware ;
USHORT usFirmwareUseInKb ;
USHORT usReserved ;
} ATOM_FIRMWARE_VRAM_RESERVE_INFO ;
typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo [ ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO ] ;
} ATOM_VRAM_USAGE_BY_FIRMWARE ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in GPIO_Pin_LUTTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_GPIO_PIN_ASSIGNMENT
{
USHORT usGpioPin_AIndex ;
UCHAR ucGpioPinBitShift ;
UCHAR ucGPIO_ID ;
} ATOM_GPIO_PIN_ASSIGNMENT ;
typedef struct _ATOM_GPIO_PIN_LUT
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin [ 1 ] ;
} ATOM_GPIO_PIN_LUT ;
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in ComponentVideoInfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
# define GPIO_PIN_ACTIVE_HIGH 0x1
# define MAX_SUPPORTED_CV_STANDARDS 5
// definitions for ATOM_D_INFO.ucSettings
# define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F // [4:0]
# define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 // [6:5] = must be zeroed out
# define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 // [7]
typedef struct _ATOM_GPIO_INFO
{
USHORT usAOffset ;
UCHAR ucSettings ;
UCHAR ucReserved ;
} ATOM_GPIO_INFO ;
// definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector)
# define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2
// definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i
# define ATOM_GPIO_DEFAULT_MODE_EN 0x80 //[7];
# define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F //[6:0]
// definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode
//Line 3 out put 5V.
# define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 //represent gpio 3 state for 16:9
# define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 //represent gpio 4 state for 16:9
# define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0
//Line 3 out put 2.2V
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 //represent gpio 3 state for 4:3 Letter box
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 //represent gpio 4 state for 4:3 Letter box
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2
//Line 3 out put 0V
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 //represent gpio 3 state for 4:3
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 //represent gpio 4 state for 4:3
# define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4
# define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F // bit [5:0]
# define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 //bit 7
//GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks.
# define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
# define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode.
typedef struct _ATOM_COMPONENT_VIDEO_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMask_PinRegisterIndex ;
USHORT usEN_PinRegisterIndex ;
USHORT usY_PinRegisterIndex ;
USHORT usA_PinRegisterIndex ;
UCHAR ucBitShift ;
UCHAR ucPinActiveState ; //ucPinActiveState: Bit0=1 active high, =0 active low
ATOM_DTD_FORMAT sReserved ; // must be zeroed out
UCHAR ucMiscInfo ;
UCHAR uc480i ;
UCHAR uc480p ;
UCHAR uc720p ;
UCHAR uc1080i ;
UCHAR ucLetterBoxMode ;
UCHAR ucReserved [ 3 ] ;
UCHAR ucNumOfWbGpioBlocks ; //For Component video D-Connector support. If zere, NTSC type connector
ATOM_GPIO_INFO aWbGpioStateBlock [ MAX_SUPPORTED_CV_STANDARDS ] ;
ATOM_DTD_FORMAT aModeTimings [ MAX_SUPPORTED_CV_STANDARDS ] ;
} ATOM_COMPONENT_VIDEO_INFO ;
//ucTableFormatRevision=2
//ucTableContentRevision=1
typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucMiscInfo ;
UCHAR uc480i ;
UCHAR uc480p ;
UCHAR uc720p ;
UCHAR uc1080i ;
UCHAR ucReserved ;
UCHAR ucLetterBoxMode ;
UCHAR ucNumOfWbGpioBlocks ; //For Component video D-Connector support. If zere, NTSC type connector
ATOM_GPIO_INFO aWbGpioStateBlock [ MAX_SUPPORTED_CV_STANDARDS ] ;
ATOM_DTD_FORMAT aModeTimings [ MAX_SUPPORTED_CV_STANDARDS ] ;
} ATOM_COMPONENT_VIDEO_INFO_V21 ;
# define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// Structure used in object_InfoTable
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_OBJECT_HEADER
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
USHORT usConnectorObjectTableOffset ;
USHORT usRouterObjectTableOffset ;
USHORT usEncoderObjectTableOffset ;
USHORT usProtectionObjectTableOffset ; //only available when Protection block is independent.
USHORT usDisplayPathTableOffset ;
} ATOM_OBJECT_HEADER ;
typedef struct _ATOM_DISPLAY_OBJECT_PATH
{
USHORT usDeviceTag ; //supported device
USHORT usSize ; //the size of ATOM_DISPLAY_OBJECT_PATH
USHORT usConnObjectId ; //Connector Object ID
USHORT usGPUObjectId ; //GPU ID
USHORT usGraphicObjIds [ 1 ] ; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
} ATOM_DISPLAY_OBJECT_PATH ;
typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
{
UCHAR ucNumOfDispPath ;
UCHAR ucVersion ;
UCHAR ucPadding [ 2 ] ;
ATOM_DISPLAY_OBJECT_PATH asDispPath [ 1 ] ;
} ATOM_DISPLAY_OBJECT_PATH_TABLE ;
typedef struct _ATOM_OBJECT //each object has this structure
{
USHORT usObjectID ;
USHORT usSrcDstTableOffset ;
USHORT usRecordOffset ; //this pointing to a bunch of records defined below
USHORT usReserved ;
} ATOM_OBJECT ;
typedef struct _ATOM_OBJECT_TABLE //Above 4 object table offset pointing to a bunch of objects all have this structure
{
UCHAR ucNumberOfObjects ;
UCHAR ucPadding [ 3 ] ;
ATOM_OBJECT asObjects [ 1 ] ;
} ATOM_OBJECT_TABLE ;
typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure
{
UCHAR ucNumberOfSrc ;
USHORT usSrcObjectID [ 1 ] ;
UCHAR ucNumberOfDst ;
USHORT usDstObjectID [ 1 ] ;
} ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT ;
//Related definitions, all records are differnt but they have a commond header
typedef struct _ATOM_COMMON_RECORD_HEADER
{
UCHAR ucRecordType ; //An emun to indicate the record type
UCHAR ucRecordSize ; //The size of the whole record in byte
} ATOM_COMMON_RECORD_HEADER ;
# define ATOM_I2C_RECORD_TYPE 1
# define ATOM_HPD_INT_RECORD_TYPE 2
# define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3
# define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4
# define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
# define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
# define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7
# define ATOM_JTAG_RECORD_TYPE 8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE
# define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9
# define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10
# define ATOM_CONNECTOR_CF_RECORD_TYPE 11
# define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12
# define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13
# define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14
# define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15
//Must be updated when new record type is added,equal to that record definition!
# define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_CONNECTOR_CF_RECORD_TYPE
typedef struct _ATOM_I2C_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
ATOM_I2C_ID_CONFIG sucI2cId ;
UCHAR ucI2CAddr ; //The slave address, it's 0 when the record is attached to connector for DDC
} ATOM_I2C_RECORD ;
typedef struct _ATOM_HPD_INT_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucHPDIntGPIOID ; //Corresponding block in GPIO_PIN_INFO table gives the pin info
UCHAR ucPluggged_PinState ;
} ATOM_HPD_INT_RECORD ;
typedef struct _ATOM_OUTPUT_PROTECTION_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucProtectionFlag ;
UCHAR ucReserved ;
} ATOM_OUTPUT_PROTECTION_RECORD ;
typedef struct _ATOM_CONNECTOR_DEVICE_TAG
{
ULONG ulACPIDeviceEnum ; //Reserved for now
USHORT usDeviceID ; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT"
USHORT usPadding ;
} ATOM_CONNECTOR_DEVICE_TAG ;
typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucNumberOfDevice ;
UCHAR ucReserved ;
ATOM_CONNECTOR_DEVICE_TAG asDeviceTag [ 1 ] ; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation
} ATOM_CONNECTOR_DEVICE_TAG_RECORD ;
typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucConfigGPIOID ;
UCHAR ucConfigGPIOState ; //Set to 1 when it's active high to enable external flow in
UCHAR ucFlowinGPIPID ;
UCHAR ucExtInGPIPID ;
} ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD ;
typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucCTL1GPIO_ID ;
UCHAR ucCTL1GPIOState ; //Set to 1 when it's active high
UCHAR ucCTL2GPIO_ID ;
UCHAR ucCTL2GPIOState ; //Set to 1 when it's active high
UCHAR ucCTL3GPIO_ID ;
UCHAR ucCTL3GPIOState ; //Set to 1 when it's active high
UCHAR ucCTLFPGA_IN_ID ;
UCHAR ucPadding [ 3 ] ;
} ATOM_ENCODER_FPGA_CONTROL_RECORD ;
typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucGPIOID ; //Corresponding block in GPIO_PIN_INFO table gives the pin info
UCHAR ucTVActiveState ; //Indicating when the pin==0 or 1 when TV is connected
} ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD ;
typedef struct _ATOM_JTAG_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucTMSGPIO_ID ;
UCHAR ucTMSGPIOState ; //Set to 1 when it's active high
UCHAR ucTCKGPIO_ID ;
UCHAR ucTCKGPIOState ; //Set to 1 when it's active high
UCHAR ucTDOGPIO_ID ;
UCHAR ucTDOGPIOState ; //Set to 1 when it's active high
UCHAR ucTDIGPIO_ID ;
UCHAR ucTDIGPIOState ; //Set to 1 when it's active high
UCHAR ucPadding [ 2 ] ;
} ATOM_JTAG_RECORD ;
//The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR
{
UCHAR ucGPIOID ; // GPIO_ID, find the corresponding ID in GPIO_LUT table
UCHAR ucGPIO_PinState ; // Pin state showing how to set-up the pin
} ATOM_GPIO_PIN_CONTROL_PAIR ;
typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucFlags ; // Future expnadibility
UCHAR ucNumberOfPins ; // Number of GPIO pins used to control the object
ATOM_GPIO_PIN_CONTROL_PAIR asGpio [ 1 ] ; // the real gpio pin pair determined by number of pins ucNumberOfPins
} ATOM_OBJECT_GPIO_CNTL_RECORD ;
//Definitions for GPIO pin state
# define GPIO_PIN_TYPE_INPUT 0x00
# define GPIO_PIN_TYPE_OUTPUT 0x10
# define GPIO_PIN_TYPE_HW_CONTROL 0x20
//For GPIO_PIN_TYPE_OUTPUT the following is defined
# define GPIO_PIN_OUTPUT_STATE_MASK 0x01
# define GPIO_PIN_OUTPUT_STATE_SHIFT 0
# define GPIO_PIN_STATE_ACTIVE_LOW 0x0
# define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
typedef struct _ATOM_ENCODER_DVO_CF_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
ULONG ulStrengthControl ; // DVOA strength control for CF
UCHAR ucPadding [ 2 ] ;
} ATOM_ENCODER_DVO_CF_RECORD ;
// value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle
# define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1
# define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2
typedef struct _ATOM_CONNECTOR_CF_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
USHORT usMaxPixClk ;
UCHAR ucFlowCntlGpioId ;
UCHAR ucSwapCntlGpioId ;
UCHAR ucConnectedDvoBundle ;
UCHAR ucPadding ;
} ATOM_CONNECTOR_CF_RECORD ;
typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
ATOM_DTD_FORMAT asTiming ;
} ATOM_CONNECTOR_HARDCODE_DTD_RECORD ;
typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ; //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE
UCHAR ucSubConnectorType ; //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A
UCHAR ucReserved ;
} ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD ;
typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucMuxType ; //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state
UCHAR ucMuxControlPin ;
UCHAR ucMuxState [ 2 ] ; //for alligment purpose
} ATOM_ROUTER_DDC_PATH_SELECT_RECORD ;
typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD
{
ATOM_COMMON_RECORD_HEADER sheader ;
UCHAR ucMuxType ;
UCHAR ucMuxControlPin ;
UCHAR ucMuxState [ 2 ] ; //for alligment purpose
} ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD ;
// define ucMuxType
# define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f
# define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01
2008-11-09 22:37:51 -07:00
/****************************************************************************/
// ASIC voltage data table
/****************************************************************************/
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_VOLTAGE_INFO_HEADER
{
USHORT usVDDCBaseLevel ; //In number of 50mv unit
USHORT usReserved ; //For possible extension table offset
UCHAR ucNumOfVoltageEntries ;
UCHAR ucBytesPerVoltageEntry ;
UCHAR ucVoltageStep ; //Indicating in how many mv increament is one step, 0.5mv unit
UCHAR ucDefaultVoltageEntry ;
UCHAR ucVoltageControlI2cLine ;
UCHAR ucVoltageControlAddress ;
UCHAR ucVoltageControlOffset ;
} ATOM_VOLTAGE_INFO_HEADER ;
typedef struct _ATOM_VOLTAGE_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_VOLTAGE_INFO_HEADER viHeader ;
UCHAR ucVoltageEntries [ 64 ] ; //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry
} ATOM_VOLTAGE_INFO ;
typedef struct _ATOM_VOLTAGE_FORMULA
{
USHORT usVoltageBaseLevel ; // In number of 1mv unit
USHORT usVoltageStep ; // Indicating in how many mv increament is one step, 1mv unit
UCHAR ucNumOfVoltageEntries ; // Number of Voltage Entry, which indicate max Voltage
UCHAR ucFlag ; // bit0=0 :step is 1mv =1 0.5mv
UCHAR ucBaseVID ; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep
UCHAR ucReserved ;
UCHAR ucVIDAdjustEntries [ 32 ] ; // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries
} ATOM_VOLTAGE_FORMULA ;
typedef struct _ATOM_VOLTAGE_CONTROL
{
UCHAR ucVoltageControlId ; //Indicate it is controlled by I2C or GPIO or HW state machine
UCHAR ucVoltageControlI2cLine ;
UCHAR ucVoltageControlAddress ;
UCHAR ucVoltageControlOffset ;
USHORT usGpioPin_AIndex ; //GPIO_PAD register index
UCHAR ucGpioPinBitShift [ 9 ] ; //at most 8 pin support 255 VIDs, termintate with 0xff
UCHAR ucReserved ;
} ATOM_VOLTAGE_CONTROL ;
// Define ucVoltageControlId
# define VOLTAGE_CONTROLLED_BY_HW 0x00
# define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F
# define VOLTAGE_CONTROLLED_BY_GPIO 0x80
# define VOLTAGE_CONTROL_ID_LM64 0x01 //I2C control, used for R5xx Core Voltage
# define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI
# define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage
# define VOLTAGE_CONTROL_ID_DS4402 0x04
typedef struct _ATOM_VOLTAGE_OBJECT
{
UCHAR ucVoltageType ; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
UCHAR ucSize ; //Size of Object
ATOM_VOLTAGE_CONTROL asControl ; //describ how to control
ATOM_VOLTAGE_FORMULA asFormula ; //Indicate How to convert real Voltage to VID
} ATOM_VOLTAGE_OBJECT ;
typedef struct _ATOM_VOLTAGE_OBJECT_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_VOLTAGE_OBJECT asVoltageObj [ 3 ] ; //Info for Voltage control
} ATOM_VOLTAGE_OBJECT_INFO ;
typedef struct _ATOM_LEAKID_VOLTAGE
{
UCHAR ucLeakageId ;
UCHAR ucReserved ;
USHORT usVoltage ;
} ATOM_LEAKID_VOLTAGE ;
typedef struct _ATOM_ASIC_PROFILE_VOLTAGE
{
UCHAR ucProfileId ;
UCHAR ucReserved ;
USHORT usSize ;
USHORT usEfuseSpareStartAddr ;
USHORT usFuseIndex [ 8 ] ; //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id,
ATOM_LEAKID_VOLTAGE asLeakVol [ 2 ] ; //Leakid and relatd voltage
} ATOM_ASIC_PROFILE_VOLTAGE ;
//ucProfileId
# define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1
# define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1
# define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2
typedef struct _ATOM_ASIC_PROFILING_INFO
{
ATOM_COMMON_TABLE_HEADER asHeader ;
ATOM_ASIC_PROFILE_VOLTAGE asVoltage ;
} ATOM_ASIC_PROFILING_INFO ;
typedef struct _ATOM_POWER_SOURCE_OBJECT
{
UCHAR ucPwrSrcId ; // Power source
UCHAR ucPwrSensorType ; // GPIO, I2C or none
UCHAR ucPwrSensId ; // if GPIO detect, it is GPIO id, if I2C detect, it is I2C id
UCHAR ucPwrSensSlaveAddr ; // Slave address if I2C detect
UCHAR ucPwrSensRegIndex ; // I2C register Index if I2C detect
UCHAR ucPwrSensRegBitMask ; // detect which bit is used if I2C detect
UCHAR ucPwrSensActiveState ; // high active or low active
UCHAR ucReserve [ 3 ] ; // reserve
USHORT usSensPwr ; // in unit of watt
} ATOM_POWER_SOURCE_OBJECT ;
typedef struct _ATOM_POWER_SOURCE_INFO
{
ATOM_COMMON_TABLE_HEADER asHeader ;
UCHAR asPwrbehave [ 16 ] ;
ATOM_POWER_SOURCE_OBJECT asPwrObj [ 1 ] ;
} ATOM_POWER_SOURCE_INFO ;
//Define ucPwrSrcId
# define POWERSOURCE_PCIE_ID1 0x00
# define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01
# define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02
# define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04
# define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08
//define ucPwrSensorId
# define POWER_SENSOR_ALWAYS 0x00
# define POWER_SENSOR_GPIO 0x01
# define POWER_SENSOR_I2C 0x02
/**************************************************************************/
// This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design
//Memory SS Info Table
//Define Memory Clock SS chip ID
# define ICS91719 1
# define ICS91720 2
//Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol
typedef struct _ATOM_I2C_DATA_RECORD
{
UCHAR ucNunberOfBytes ; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop"
UCHAR ucI2CData [ 1 ] ; //I2C data in bytes, should be less than 16 bytes usually
} ATOM_I2C_DATA_RECORD ;
//Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information
typedef struct _ATOM_I2C_DEVICE_SETUP_INFO
{
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ; //I2C line and HW/SW assisted cap.
UCHAR ucSSChipID ; //SS chip being used
UCHAR ucSSChipSlaveAddr ; //Slave Address to set up this SS chip
UCHAR ucNumOfI2CDataRecords ; //number of data block
ATOM_I2C_DATA_RECORD asI2CData [ 1 ] ;
} ATOM_I2C_DEVICE_SETUP_INFO ;
//==========================================================================================
typedef struct _ATOM_ASIC_MVDD_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup [ 1 ] ;
} ATOM_ASIC_MVDD_INFO ;
//==========================================================================================
# define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO
//==========================================================================================
/**************************************************************************/
typedef struct _ATOM_ASIC_SS_ASSIGNMENT
{
ULONG ulTargetClockRange ; //Clock Out frequence (VCO ), in unit of 10Khz
USHORT usSpreadSpectrumPercentage ; //in unit of 0.01%
USHORT usSpreadRateInKhz ; //in unit of kHz, modulation freq
UCHAR ucClockIndication ; //Indicate which clock source needs SS
UCHAR ucSpreadSpectrumMode ; //Bit1=0 Down Spread,=1 Center Spread.
UCHAR ucReserved [ 2 ] ;
} ATOM_ASIC_SS_ASSIGNMENT ;
//Define ucSpreadSpectrumType
# define ASIC_INTERNAL_MEMORY_SS 1
# define ASIC_INTERNAL_ENGINE_SS 2
# define ASIC_INTERNAL_UVD_SS 3
typedef struct _ATOM_ASIC_INTERNAL_SS_INFO {
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum [ 4 ] ;
} ATOM_ASIC_INTERNAL_SS_INFO ;
//==============================Scratch Pad Definition Portion===============================
# define ATOM_DEVICE_CONNECT_INFO_DEF 0
# define ATOM_ROM_LOCATION_DEF 1
# define ATOM_TV_STANDARD_DEF 2
# define ATOM_ACTIVE_INFO_DEF 3
# define ATOM_LCD_INFO_DEF 4
# define ATOM_DOS_REQ_INFO_DEF 5
# define ATOM_ACC_CHANGE_INFO_DEF 6
# define ATOM_DOS_MODE_INFO_DEF 7
# define ATOM_I2C_CHANNEL_STATUS_DEF 8
# define ATOM_I2C_CHANNEL_STATUS1_DEF 9
// BIOS_0_SCRATCH Definition
# define ATOM_S0_CRT1_MONO 0x00000001L
# define ATOM_S0_CRT1_COLOR 0x00000002L
# define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR)
# define ATOM_S0_TV1_COMPOSITE_A 0x00000004L
# define ATOM_S0_TV1_SVIDEO_A 0x00000008L
# define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A)
# define ATOM_S0_CV_A 0x00000010L
# define ATOM_S0_CV_DIN_A 0x00000020L
# define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A)
# define ATOM_S0_CRT2_MONO 0x00000100L
# define ATOM_S0_CRT2_COLOR 0x00000200L
# define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR)
# define ATOM_S0_TV1_COMPOSITE 0x00000400L
# define ATOM_S0_TV1_SVIDEO 0x00000800L
# define ATOM_S0_TV1_SCART 0x00004000L
# define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART)
# define ATOM_S0_CV 0x00001000L
# define ATOM_S0_CV_DIN 0x00002000L
# define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN)
# define ATOM_S0_DFP1 0x00010000L
# define ATOM_S0_DFP2 0x00020000L
# define ATOM_S0_LCD1 0x00040000L
# define ATOM_S0_LCD2 0x00080000L
# define ATOM_S0_TV2 0x00100000L
# define ATOM_S0_DFP3 0x00200000L
2008-11-09 22:37:51 -07:00
# define ATOM_S0_DFP4 0x00400000L
# define ATOM_S0_DFP5 0x00800000L
# define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5
2008-07-25 16:56:23 -06:00
# define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with
// the FAD/HDP reg access bug. Bit is read by DAL
# define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L
# define ATOM_S0_THERMAL_STATE_SHIFT 26
# define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L
# define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29
# define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1
# define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
# define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
//Byte aligned defintion for BIOS usage
# define ATOM_S0_CRT1_MONOb0 0x01
# define ATOM_S0_CRT1_COLORb0 0x02
# define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
# define ATOM_S0_TV1_COMPOSITEb0 0x04
# define ATOM_S0_TV1_SVIDEOb0 0x08
# define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0)
# define ATOM_S0_CVb0 0x10
# define ATOM_S0_CV_DINb0 0x20
# define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0)
# define ATOM_S0_CRT2_MONOb1 0x01
# define ATOM_S0_CRT2_COLORb1 0x02
# define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1)
# define ATOM_S0_TV1_COMPOSITEb1 0x04
# define ATOM_S0_TV1_SVIDEOb1 0x08
# define ATOM_S0_TV1_SCARTb1 0x40
# define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1)
# define ATOM_S0_CVb1 0x10
# define ATOM_S0_CV_DINb1 0x20
# define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1)
# define ATOM_S0_DFP1b2 0x01
# define ATOM_S0_DFP2b2 0x02
# define ATOM_S0_LCD1b2 0x04
# define ATOM_S0_LCD2b2 0x08
# define ATOM_S0_TV2b2 0x10
# define ATOM_S0_DFP3b2 0x20
# define ATOM_S0_THERMAL_STATE_MASKb3 0x1C
# define ATOM_S0_THERMAL_STATE_SHIFTb3 2
# define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0
# define ATOM_S0_LCD1_SHIFT 18
// BIOS_1_SCRATCH Definition
# define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL
# define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L
// BIOS_2_SCRATCH Definition
# define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL
# define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L
# define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8
# define ATOM_S2_CRT1_DPMS_STATE 0x00010000L
# define ATOM_S2_LCD1_DPMS_STATE 0x00020000L
# define ATOM_S2_TV1_DPMS_STATE 0x00040000L
# define ATOM_S2_DFP1_DPMS_STATE 0x00080000L
# define ATOM_S2_CRT2_DPMS_STATE 0x00100000L
# define ATOM_S2_LCD2_DPMS_STATE 0x00200000L
# define ATOM_S2_TV2_DPMS_STATE 0x00400000L
# define ATOM_S2_DFP2_DPMS_STATE 0x00800000L
# define ATOM_S2_CV_DPMS_STATE 0x01000000L
# define ATOM_S2_DFP3_DPMS_STATE 0x02000000L
2008-11-09 22:37:51 -07:00
# define ATOM_S2_DFP4_DPMS_STATE 0x04000000L
# define ATOM_S2_DFP5_DPMS_STATE 0x08000000L
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
# define ATOM_S2_DFP_DPM_STATE ATOM_S2_DFP1_DPMS_STATE | ATOM_S2_DFP2_DPMS_STATE | ATOM_S2_DFP3_DPMS_STATE | ATOM_S2_DFP4_DPMS_STATE | ATOM_S2_DFP5_DPMS_STATE
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
# define ATOM_S2_DEVICE_DPMS_STATE (ATOM_S2_CRT1_DPMS_STATE+ATOM_S2_LCD1_DPMS_STATE+ATOM_S2_TV1_DPMS_STATE+\
ATOM_S2_DFP_DPMS_STATE + ATOM_S2_CRT2_DPMS_STATE + ATOM_S2_LCD2_DPMS_STATE + \
ATOM_S2_TV2_DPMS_STATE + ATOM_S2_CV_DPMS_STATE
2008-07-25 16:56:23 -06:00
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L
# define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L
# define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0
# define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1
# define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2
# define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3
# define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
# define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
//Byte aligned defintion for BIOS usage
# define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
# define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
# define ATOM_S2_CRT1_DPMS_STATEb2 0x01
# define ATOM_S2_LCD1_DPMS_STATEb2 0x02
# define ATOM_S2_TV1_DPMS_STATEb2 0x04
# define ATOM_S2_DFP1_DPMS_STATEb2 0x08
# define ATOM_S2_CRT2_DPMS_STATEb2 0x10
# define ATOM_S2_LCD2_DPMS_STATEb2 0x20
# define ATOM_S2_TV2_DPMS_STATEb2 0x40
# define ATOM_S2_DFP2_DPMS_STATEb2 0x80
# define ATOM_S2_CV_DPMS_STATEb3 0x01
# define ATOM_S2_DFP3_DPMS_STATEb3 0x02
2008-11-09 22:37:51 -07:00
# define ATOM_S2_DFP4_DPMS_STATEb3 0x04
# define ATOM_S2_DFP5_DPMS_STATEb3 0x08
2008-07-25 16:56:23 -06:00
# define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C
# define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10
# define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
# define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
// BIOS_3_SCRATCH Definition
# define ATOM_S3_CRT1_ACTIVE 0x00000001L
# define ATOM_S3_LCD1_ACTIVE 0x00000002L
# define ATOM_S3_TV1_ACTIVE 0x00000004L
# define ATOM_S3_DFP1_ACTIVE 0x00000008L
# define ATOM_S3_CRT2_ACTIVE 0x00000010L
# define ATOM_S3_LCD2_ACTIVE 0x00000020L
# define ATOM_S3_TV2_ACTIVE 0x00000040L
# define ATOM_S3_DFP2_ACTIVE 0x00000080L
# define ATOM_S3_CV_ACTIVE 0x00000100L
# define ATOM_S3_DFP3_ACTIVE 0x00000200L
2008-11-09 22:37:51 -07:00
# define ATOM_S3_DFP4_ACTIVE 0x00000400L
# define ATOM_S3_DFP5_ACTIVE 0x00000800L
2008-07-25 16:56:23 -06:00
# define ATOM_S3_DEVICE_ACTIVE_MASK 0x000003FFL
# define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L
# define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L
# define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L
# define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L
# define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L
# define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L
# define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L
# define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L
# define ATOM_S3_TV2_CRTC_ACTIVE 0x00400000L
# define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L
# define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L
# define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L
2008-11-09 22:37:51 -07:00
# define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L
# define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
# define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L
2008-07-25 16:56:23 -06:00
# define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L
# define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
# define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
//Byte aligned defintion for BIOS usage
# define ATOM_S3_CRT1_ACTIVEb0 0x01
# define ATOM_S3_LCD1_ACTIVEb0 0x02
# define ATOM_S3_TV1_ACTIVEb0 0x04
# define ATOM_S3_DFP1_ACTIVEb0 0x08
# define ATOM_S3_CRT2_ACTIVEb0 0x10
# define ATOM_S3_LCD2_ACTIVEb0 0x20
# define ATOM_S3_TV2_ACTIVEb0 0x40
# define ATOM_S3_DFP2_ACTIVEb0 0x80
# define ATOM_S3_CV_ACTIVEb1 0x01
# define ATOM_S3_DFP3_ACTIVEb1 0x02
2008-11-09 22:37:51 -07:00
# define ATOM_S3_DFP4_ACTIVEb1 0x04
# define ATOM_S3_DFP5_ACTIVEb1 0x08
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
# define ATOM_S3_ACTIVE_CRTC1w0 0xFFF
2008-07-25 16:56:23 -06:00
# define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01
# define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02
# define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04
# define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08
# define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10
# define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20
# define ATOM_S3_TV2_CRTC_ACTIVEb2 0x40
# define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80
# define ATOM_S3_CV_CRTC_ACTIVEb3 0x01
# define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02
2008-11-09 22:37:51 -07:00
# define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04
# define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
# define ATOM_S3_ACTIVE_CRTC2w1 0xFFF
2008-07-25 16:56:23 -06:00
# define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20
# define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40
# define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80
// BIOS_4_SCRATCH Definition
# define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL
# define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
# define ATOM_S4_LCD1_REFRESH_SHIFT 8
//Byte aligned defintion for BIOS usage
# define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
# define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
# define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
// BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!!
# define ATOM_S5_DOS_REQ_CRT1b0 0x01
# define ATOM_S5_DOS_REQ_LCD1b0 0x02
# define ATOM_S5_DOS_REQ_TV1b0 0x04
# define ATOM_S5_DOS_REQ_DFP1b0 0x08
# define ATOM_S5_DOS_REQ_CRT2b0 0x10
# define ATOM_S5_DOS_REQ_LCD2b0 0x20
# define ATOM_S5_DOS_REQ_TV2b0 0x40
# define ATOM_S5_DOS_REQ_DFP2b0 0x80
# define ATOM_S5_DOS_REQ_CVb1 0x01
# define ATOM_S5_DOS_REQ_DFP3b1 0x02
2008-11-09 22:37:51 -07:00
# define ATOM_S5_DOS_REQ_DFP4b1 0x04
# define ATOM_S5_DOS_REQ_DFP5b1 0x08
2008-07-25 16:56:23 -06:00
# define ATOM_S5_DOS_REQ_DEVICEw0 0x03FF
# define ATOM_S5_DOS_REQ_CRT1 0x0001
# define ATOM_S5_DOS_REQ_LCD1 0x0002
# define ATOM_S5_DOS_REQ_TV1 0x0004
# define ATOM_S5_DOS_REQ_DFP1 0x0008
# define ATOM_S5_DOS_REQ_CRT2 0x0010
# define ATOM_S5_DOS_REQ_LCD2 0x0020
# define ATOM_S5_DOS_REQ_TV2 0x0040
# define ATOM_S5_DOS_REQ_DFP2 0x0080
# define ATOM_S5_DOS_REQ_CV 0x0100
# define ATOM_S5_DOS_REQ_DFP3 0x0200
2008-11-09 22:37:51 -07:00
# define ATOM_S5_DOS_REQ_DFP4 0x0400
# define ATOM_S5_DOS_REQ_DFP5 0x0800
2008-07-25 16:56:23 -06:00
# define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0
# define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0
# define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0
# define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1
# define ATOM_S5_DOS_FORCE_DEVICEw1 (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\
( ATOM_S5_DOS_FORCE_CVb3 < < 8 ) )
// BIOS_6_SCRATCH Definition
# define ATOM_S6_DEVICE_CHANGE 0x00000001L
# define ATOM_S6_SCALER_CHANGE 0x00000002L
# define ATOM_S6_LID_CHANGE 0x00000004L
# define ATOM_S6_DOCKING_CHANGE 0x00000008L
# define ATOM_S6_ACC_MODE 0x00000010L
# define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L
# define ATOM_S6_LID_STATE 0x00000040L
# define ATOM_S6_DOCK_STATE 0x00000080L
# define ATOM_S6_CRITICAL_STATE 0x00000100L
# define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L
# define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L
# define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L
# define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L //Normal expansion Request bit for LCD
# define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L //Aspect ratio expansion Request bit for LCD
# define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion
# define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion
# define ATOM_S6_ACC_REQ_CRT1 0x00010000L
# define ATOM_S6_ACC_REQ_LCD1 0x00020000L
# define ATOM_S6_ACC_REQ_TV1 0x00040000L
# define ATOM_S6_ACC_REQ_DFP1 0x00080000L
# define ATOM_S6_ACC_REQ_CRT2 0x00100000L
# define ATOM_S6_ACC_REQ_LCD2 0x00200000L
# define ATOM_S6_ACC_REQ_TV2 0x00400000L
# define ATOM_S6_ACC_REQ_DFP2 0x00800000L
# define ATOM_S6_ACC_REQ_CV 0x01000000L
# define ATOM_S6_ACC_REQ_DFP3 0x02000000L
2008-11-09 22:37:51 -07:00
# define ATOM_S6_ACC_REQ_DFP4 0x04000000L
# define ATOM_S6_ACC_REQ_DFP5 0x08000000L
2008-07-25 16:56:23 -06:00
2008-11-09 22:37:51 -07:00
# define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L
2008-07-25 16:56:23 -06:00
# define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L
# define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L
# define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
# define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
//Byte aligned defintion for BIOS usage
# define ATOM_S6_DEVICE_CHANGEb0 0x01
# define ATOM_S6_SCALER_CHANGEb0 0x02
# define ATOM_S6_LID_CHANGEb0 0x04
# define ATOM_S6_DOCKING_CHANGEb0 0x08
# define ATOM_S6_ACC_MODEb0 0x10
# define ATOM_S6_EXT_DESKTOP_MODEb0 0x20
# define ATOM_S6_LID_STATEb0 0x40
# define ATOM_S6_DOCK_STATEb0 0x80
# define ATOM_S6_CRITICAL_STATEb1 0x01
# define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02
# define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04
# define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08
# define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10
# define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20
# define ATOM_S6_ACC_REQ_CRT1b2 0x01
# define ATOM_S6_ACC_REQ_LCD1b2 0x02
# define ATOM_S6_ACC_REQ_TV1b2 0x04
# define ATOM_S6_ACC_REQ_DFP1b2 0x08
# define ATOM_S6_ACC_REQ_CRT2b2 0x10
# define ATOM_S6_ACC_REQ_LCD2b2 0x20
# define ATOM_S6_ACC_REQ_TV2b2 0x40
# define ATOM_S6_ACC_REQ_DFP2b2 0x80
# define ATOM_S6_ACC_REQ_CVb3 0x01
# define ATOM_S6_ACC_REQ_DFP3b3 0x02
2008-11-09 22:37:51 -07:00
# define ATOM_S6_ACC_REQ_DFP4b3 0x04
# define ATOM_S6_ACC_REQ_DFP5b3 0x08
2008-07-25 16:56:23 -06:00
# define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0
# define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10
# define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20
# define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40
# define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80
# define ATOM_S6_DEVICE_CHANGE_SHIFT 0
# define ATOM_S6_SCALER_CHANGE_SHIFT 1
# define ATOM_S6_LID_CHANGE_SHIFT 2
# define ATOM_S6_DOCKING_CHANGE_SHIFT 3
# define ATOM_S6_ACC_MODE_SHIFT 4
# define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5
# define ATOM_S6_LID_STATE_SHIFT 6
# define ATOM_S6_DOCK_STATE_SHIFT 7
# define ATOM_S6_CRITICAL_STATE_SHIFT 8
# define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9
# define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10
# define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11
# define ATOM_S6_REQ_SCALER_SHIFT 12
# define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13
# define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14
# define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15
# define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28
# define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29
# define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30
# define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31
// BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!!
# define ATOM_S7_DOS_MODE_TYPEb0 0x03
# define ATOM_S7_DOS_MODE_VGAb0 0x00
# define ATOM_S7_DOS_MODE_VESAb0 0x01
# define ATOM_S7_DOS_MODE_EXTb0 0x02
# define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C
# define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0
# define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01
# define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF
# define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8
// BIOS_8_SCRATCH Definition
# define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF
# define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000
# define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0
# define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16
// BIOS_9_SCRATCH Definition
# ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK
# define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF
# endif
# ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK
# define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000
# endif
# ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT
# define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0
# endif
# ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT
# define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16
# endif
# define ATOM_FLAG_SET 0x20
# define ATOM_FLAG_CLEAR 0
# define CLEAR_ATOM_S6_ACC_MODE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR)
# define SET_ATOM_S6_DEVICE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_SCALER_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_LID_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET)
# define CLEAR_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR)
# define SET_ATOM_S6_DOCK_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET)
# define CLEAR_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR)
# define SET_ATOM_S6_THERMAL_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET)
# define SET_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET)
# define CLEAR_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR)
# define SET_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET)
# define CLEAR_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S6_I2C_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_DISPLAY_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET )
# define SET_ATOM_S6_DEVICE_RECONFIG ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET)
# define CLEAR_ATOM_S0_LCD1 ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )| ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR )
# define SET_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET )
# define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR )
/****************************************************************************/
//Portion II: Definitinos only used in Driver
/****************************************************************************/
// Macros used by driver
# define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char*)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*)0)->FieldName)-(char*)0) / sizeof(USHORT))
# define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F)
# define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F)
# define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION
# define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION
/****************************************************************************/
//Portion III: Definitinos only used in VBIOS
/****************************************************************************/
# define ATOM_DAC_SRC 0x80
# define ATOM_SRC_DAC1 0
# define ATOM_SRC_DAC2 0x80
# ifdef UEFI_BUILD
# define USHORT UTEMP
# endif
typedef struct _MEMORY_PLLINIT_PARAMETERS
{
ULONG ulTargetMemoryClock ; //In 10Khz unit
UCHAR ucAction ; //not define yet
UCHAR ucFbDiv_Hi ; //Fbdiv Hi byte
UCHAR ucFbDiv ; //FB value
UCHAR ucPostDiv ; //Post div
} MEMORY_PLLINIT_PARAMETERS ;
# define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS
# define GPIO_PIN_WRITE 0x01
# define GPIO_PIN_READ 0x00
typedef struct _GPIO_PIN_CONTROL_PARAMETERS
{
UCHAR ucGPIO_ID ; //return value, read from GPIO pins
UCHAR ucGPIOBitShift ; //define which bit in uGPIOBitVal need to be update
UCHAR ucGPIOBitVal ; //Set/Reset corresponding bit defined in ucGPIOBitMask
UCHAR ucAction ; //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write
} GPIO_PIN_CONTROL_PARAMETERS ;
typedef struct _ENABLE_SCALER_PARAMETERS
{
UCHAR ucScaler ; // ATOM_SCALER1, ATOM_SCALER2
UCHAR ucEnable ; // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION
UCHAR ucTVStandard ; //
UCHAR ucPadding [ 1 ] ;
} ENABLE_SCALER_PARAMETERS ;
# define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS
//ucEnable:
# define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0
# define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1
# define SCALER_ENABLE_2TAP_ALPHA_MODE 2
# define SCALER_ENABLE_MULTITAP_MODE 3
typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS
{
ULONG usHWIconHorzVertPosn ; // Hardware Icon Vertical position
UCHAR ucHWIconVertOffset ; // Hardware Icon Vertical offset
UCHAR ucHWIconHorzOffset ; // Hardware Icon Horizontal offset
UCHAR ucSelection ; // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2
UCHAR ucEnable ; // ATOM_ENABLE or ATOM_DISABLE
} ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS ;
typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION
{
ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon ;
ENABLE_CRTC_PARAMETERS sReserved ;
} ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION ;
typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS
{
USHORT usHight ; // Image Hight
USHORT usWidth ; // Image Width
UCHAR ucSurface ; // Surface 1 or 2
UCHAR ucPadding [ 3 ] ;
} ENABLE_GRAPH_SURFACE_PARAMETERS ;
typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2
{
USHORT usHight ; // Image Hight
USHORT usWidth ; // Image Width
UCHAR ucSurface ; // Surface 1 or 2
UCHAR ucEnable ; // ATOM_ENABLE or ATOM_DISABLE
UCHAR ucPadding [ 2 ] ;
} ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 ;
typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
{
ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface ;
ENABLE_YUV_PS_ALLOCATION sReserved ; // Don't set this one
} ENABLE_GRAPH_SURFACE_PS_ALLOCATION ;
typedef struct _MEMORY_CLEAN_UP_PARAMETERS
{
USHORT usMemoryStart ; //in 8Kb boundry, offset from memory base address
USHORT usMemorySize ; //8Kb blocks aligned
} MEMORY_CLEAN_UP_PARAMETERS ;
# define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
{
USHORT usX_Size ; //When use as input parameter, usX_Size indicates which CRTC
USHORT usY_Size ;
} GET_DISPLAY_SURFACE_SIZE_PARAMETERS ;
typedef struct _INDIRECT_IO_ACCESS
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR IOAccessSequence [ 256 ] ;
} INDIRECT_IO_ACCESS ;
# define INDIRECT_READ 0x00
# define INDIRECT_WRITE 0x80
# define INDIRECT_IO_MM 0
# define INDIRECT_IO_PLL 1
# define INDIRECT_IO_MC 2
# define INDIRECT_IO_PCIE 3
# define INDIRECT_IO_PCIEP 4
# define INDIRECT_IO_NBMISC 5
# define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ
# define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE
# define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ
# define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE
# define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ
# define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE
# define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ
# define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE
# define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ
# define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE
typedef struct _ATOM_OEM_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ;
} ATOM_OEM_INFO ;
typedef struct _ATOM_TV_MODE
{
UCHAR ucVMode_Num ; //Video mode number
UCHAR ucTV_Mode_Num ; //Internal TV mode number
} ATOM_TV_MODE ;
typedef struct _ATOM_BIOS_INT_TVSTD_MODE
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usTV_Mode_LUT_Offset ; // Pointer to standard to internal number conversion table
USHORT usTV_FIFO_Offset ; // Pointer to FIFO entry table
USHORT usNTSC_Tbl_Offset ; // Pointer to SDTV_Mode_NTSC table
USHORT usPAL_Tbl_Offset ; // Pointer to SDTV_Mode_PAL table
USHORT usCV_Tbl_Offset ; // Pointer to SDTV_Mode_PAL table
} ATOM_BIOS_INT_TVSTD_MODE ;
typedef struct _ATOM_TV_MODE_SCALER_PTR
{
USHORT ucFilter0_Offset ; //Pointer to filter format 0 coefficients
USHORT usFilter1_Offset ; //Pointer to filter format 0 coefficients
UCHAR ucTV_Mode_Num ;
} ATOM_TV_MODE_SCALER_PTR ;
typedef struct _ATOM_STANDARD_VESA_TIMING
{
ATOM_COMMON_TABLE_HEADER sHeader ;
2008-11-09 22:37:51 -07:00
ATOM_DTD_FORMAT aModeTimings [ 16 ] ; // 16 is not the real array number, just for initial allocation
2008-07-25 16:56:23 -06:00
} ATOM_STANDARD_VESA_TIMING ;
typedef struct _ATOM_STD_FORMAT
{
USHORT usSTD_HDisp ;
USHORT usSTD_VDisp ;
USHORT usSTD_RefreshRate ;
USHORT usReserved ;
} ATOM_STD_FORMAT ;
typedef struct _ATOM_VESA_TO_EXTENDED_MODE
{
USHORT usVESA_ModeNumber ;
USHORT usExtendedModeNumber ;
} ATOM_VESA_TO_EXTENDED_MODE ;
typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT
{
ATOM_COMMON_TABLE_HEADER sHeader ;
ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo [ 76 ] ;
} ATOM_VESA_TO_INTENAL_MODE_LUT ;
/*************** ATOM Memory Related Data Structure ***********************/
typedef struct _ATOM_MEMORY_VENDOR_BLOCK {
UCHAR ucMemoryType ;
UCHAR ucMemoryVendor ;
UCHAR ucAdjMCId ;
UCHAR ucDynClkId ;
ULONG ulDllResetClkRange ;
} ATOM_MEMORY_VENDOR_BLOCK ;
typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG {
# if ATOM_BIG_ENDIAN
ULONG ucMemBlkId : 8 ;
ULONG ulMemClockRange : 24 ;
# else
ULONG ulMemClockRange : 24 ;
ULONG ucMemBlkId : 8 ;
# endif
} ATOM_MEMORY_SETTING_ID_CONFIG ;
typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS
{
ATOM_MEMORY_SETTING_ID_CONFIG slAccess ;
ULONG ulAccess ;
} ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ;
typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK {
ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID ;
ULONG aulMemData [ 1 ] ;
} ATOM_MEMORY_SETTING_DATA_BLOCK ;
typedef struct _ATOM_INIT_REG_INDEX_FORMAT {
USHORT usRegIndex ; // MC register index
UCHAR ucPreRegDataLength ; // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf
} ATOM_INIT_REG_INDEX_FORMAT ;
typedef struct _ATOM_INIT_REG_BLOCK {
USHORT usRegIndexTblSize ; //size of asRegIndexBuf
USHORT usRegDataBlkSize ; //size of ATOM_MEMORY_SETTING_DATA_BLOCK
ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf [ 1 ] ;
ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf [ 1 ] ;
} ATOM_INIT_REG_BLOCK ;
# define END_OF_REG_INDEX_BLOCK 0x0ffff
# define END_OF_REG_DATA_BLOCK 0x00000000
# define ATOM_INIT_REG_MASK_FLAG 0x80
# define CLOCK_RANGE_HIGHEST 0x00ffffff
# define VALUE_DWORD SIZEOF ULONG
# define VALUE_SAME_AS_ABOVE 0
# define VALUE_MASK_DWORD 0x84
2008-11-09 22:37:51 -07:00
# define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1)
# define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1)
# define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1)
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MC_INIT_PARAM_TABLE
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usAdjustARB_SEQDataOffset ;
USHORT usMCInitMemTypeTblOffset ;
USHORT usMCInitCommonTblOffset ;
USHORT usMCInitPowerDownTblOffset ;
ULONG ulARB_SEQDataBuf [ 32 ] ;
ATOM_INIT_REG_BLOCK asMCInitMemType ;
ATOM_INIT_REG_BLOCK asMCInitCommon ;
} ATOM_MC_INIT_PARAM_TABLE ;
# define _4Mx16 0x2
# define _4Mx32 0x3
# define _8Mx16 0x12
# define _8Mx32 0x13
# define _16Mx16 0x22
# define _16Mx32 0x23
# define _32Mx16 0x32
# define _32Mx32 0x33
# define _64Mx8 0x41
# define _64Mx16 0x42
# define SAMSUNG 0x1
# define INFINEON 0x2
# define ELPIDA 0x3
# define ETRON 0x4
# define NANYA 0x5
# define HYNIX 0x6
# define MOSEL 0x7
# define WINBOND 0x8
# define ESMT 0x9
# define MICRON 0xF
# define QIMONDA INFINEON
# define PROMOS MOSEL
2008-11-09 22:37:51 -07:00
/////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM/////////////
# define UCODE_ROM_START_ADDRESS 0x1c000
# define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode
//uCode block header for reference
typedef struct _MCuCodeHeader
{
ULONG ulSignature ;
UCHAR ucRevision ;
UCHAR ucChecksum ;
UCHAR ucReserved1 ;
UCHAR ucReserved2 ;
USHORT usParametersLength ;
USHORT usUCodeLength ;
USHORT usReserved1 ;
USHORT usReserved2 ;
} MCuCodeHeader ;
//////////////////////////////////////////////////////////////////////////////////
2008-07-25 16:56:23 -06:00
# define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16
# define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF
typedef struct _ATOM_VRAM_MODULE_V1
{
ULONG ulReserved ;
USHORT usEMRSValue ;
USHORT usMRSValue ;
USHORT usReserved ;
UCHAR ucExtMemoryID ; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
UCHAR ucMemoryType ; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved;
UCHAR ucMemoryVenderID ; // Predefined,never change across designs or memory type/vender
UCHAR ucMemoryDeviceCfg ; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
UCHAR ucRow ; // Number of Row,in power of 2;
UCHAR ucColumn ; // Number of Column,in power of 2;
UCHAR ucBank ; // Nunber of Bank;
UCHAR ucRank ; // Number of Rank, in power of 2
UCHAR ucChannelNum ; // Number of channel;
UCHAR ucChannelConfig ; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
UCHAR ucDefaultMVDDQ_ID ; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
UCHAR ucDefaultMVDDC_ID ; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
UCHAR ucReserved [ 2 ] ;
} ATOM_VRAM_MODULE_V1 ;
typedef struct _ATOM_VRAM_MODULE_V2
{
ULONG ulReserved ;
ULONG ulFlags ; // To enable/disable functionalities based on memory type
ULONG ulEngineClock ; // Override of default engine clock for particular memory type
ULONG ulMemoryClock ; // Override of default memory clock for particular memory type
USHORT usEMRS2Value ; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
USHORT usEMRS3Value ; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
USHORT usEMRSValue ;
USHORT usMRSValue ;
USHORT usReserved ;
UCHAR ucExtMemoryID ; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
UCHAR ucMemoryType ; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
UCHAR ucMemoryVenderID ; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
UCHAR ucMemoryDeviceCfg ; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32...
UCHAR ucRow ; // Number of Row,in power of 2;
UCHAR ucColumn ; // Number of Column,in power of 2;
UCHAR ucBank ; // Nunber of Bank;
UCHAR ucRank ; // Number of Rank, in power of 2
UCHAR ucChannelNum ; // Number of channel;
UCHAR ucChannelConfig ; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2
UCHAR ucDefaultMVDDQ_ID ; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
UCHAR ucDefaultMVDDC_ID ; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
UCHAR ucRefreshRateFactor ;
UCHAR ucReserved [ 3 ] ;
} ATOM_VRAM_MODULE_V2 ;
typedef struct _ATOM_MEMORY_TIMING_FORMAT
2008-11-09 22:37:51 -07:00
{
ULONG ulClkRange ; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
union {
USHORT usMRS ; // mode register
USHORT usDDR3_MR0 ;
} ;
union {
USHORT usEMRS ; // extended mode register
USHORT usDDR3_MR1 ;
} ;
UCHAR ucCL ; // CAS latency
UCHAR ucWL ; // WRITE Latency
UCHAR uctRAS ; // tRAS
UCHAR uctRC ; // tRC
UCHAR uctRFC ; // tRFC
UCHAR uctRCDR ; // tRCDR
UCHAR uctRCDW ; // tRCDW
UCHAR uctRP ; // tRP
UCHAR uctRRD ; // tRRD
UCHAR uctWR ; // tWR
UCHAR uctWTR ; // tWTR
UCHAR uctPDIX ; // tPDIX
UCHAR uctFAW ; // tFAW
UCHAR uctAOND ; // tAOND
union
{
struct {
UCHAR ucflag ; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
UCHAR ucReserved ;
} ;
USHORT usDDR3_MR2 ;
} ;
} ATOM_MEMORY_TIMING_FORMAT ;
typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1
2008-07-25 16:56:23 -06:00
{
ULONG ulClkRange ; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing
USHORT usMRS ; // mode register
USHORT usEMRS ; // extended mode register
UCHAR ucCL ; // CAS latency
UCHAR ucWL ; // WRITE Latency
UCHAR uctRAS ; // tRAS
UCHAR uctRC ; // tRC
UCHAR uctRFC ; // tRFC
UCHAR uctRCDR ; // tRCDR
UCHAR uctRCDW ; // tRCDW
UCHAR uctRP ; // tRP
UCHAR uctRRD ; // tRRD
UCHAR uctWR ; // tWR
UCHAR uctWTR ; // tWTR
UCHAR uctPDIX ; // tPDIX
UCHAR uctFAW ; // tFAW
UCHAR uctAOND ; // tAOND
UCHAR ucflag ; // flag to control memory timing calculation. bit0= control EMRS2 Infineon
2008-11-09 22:37:51 -07:00
////////////////////////////////////GDDR parameters///////////////////////////////////
UCHAR uctCCDL ; //
UCHAR uctCRCRL ; //
UCHAR uctCRCWL ; //
UCHAR uctCKE ; //
UCHAR uctCKRSE ; //
UCHAR uctCKRSX ; //
UCHAR uctFAW32 ; //
UCHAR ucReserved1 ; //
UCHAR ucReserved2 ; //
UCHAR ucTerminator ;
} ATOM_MEMORY_TIMING_FORMAT_V1 ;
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_MEMORY_FORMAT
{
ULONG ulDllDisClock ; // memory DLL will be disable when target memory clock is below this clock
2008-11-09 22:37:51 -07:00
union {
USHORT usEMRS2Value ; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
USHORT usDDR3_Reserved ; // Not used for DDR3 memory
} ;
union {
USHORT usEMRS3Value ; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
USHORT usDDR3_MR3 ; // Used for DDR3 memory
} ;
2008-07-25 16:56:23 -06:00
UCHAR ucMemoryType ; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now;
UCHAR ucMemoryVenderID ; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed
UCHAR ucRow ; // Number of Row,in power of 2;
UCHAR ucColumn ; // Number of Column,in power of 2;
UCHAR ucBank ; // Nunber of Bank;
UCHAR ucRank ; // Number of Rank, in power of 2
UCHAR ucBurstSize ; // burst size, 0= burst size=4 1= burst size=8
UCHAR ucDllDisBit ; // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register )
UCHAR ucRefreshRateFactor ; // memory refresh rate in unit of ms
UCHAR ucDensity ; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
UCHAR ucPreamble ; //[7:4] Write Preamble, [3:0] Read Preamble
UCHAR ucMemAttrib ; // Memory Device Addribute, like RDBI/WDBI etc
ATOM_MEMORY_TIMING_FORMAT asMemTiming [ 5 ] ; //Memory Timing block sort from lower clock to higher clock
} ATOM_MEMORY_FORMAT ;
typedef struct _ATOM_VRAM_MODULE_V3
{
ULONG ulChannelMapCfg ; // board dependent paramenter:Channel combination
USHORT usSize ; // size of ATOM_VRAM_MODULE_V3
USHORT usDefaultMVDDQ ; // board dependent parameter:Default Memory Core Voltage
USHORT usDefaultMVDDC ; // board dependent parameter:Default Memory IO Voltage
UCHAR ucExtMemoryID ; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
UCHAR ucChannelNum ; // board dependent parameter:Number of channel;
UCHAR ucChannelSize ; // board dependent parameter:32bit or 64bit
UCHAR ucVREFI ; // board dependnt parameter: EXT or INT +160mv to -140mv
UCHAR ucNPL_RT ; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
UCHAR ucFlag ; // To enable/disable functionalities based on memory type
ATOM_MEMORY_FORMAT asMemory ; // describ all of video memory parameters from memory spec
} ATOM_VRAM_MODULE_V3 ;
//ATOM_VRAM_MODULE_V3.ucNPL_RT
# define NPL_RT_MASK 0x0f
# define BATTERY_ODT_MASK 0xc0
# define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3
2008-11-09 22:37:51 -07:00
typedef struct _ATOM_VRAM_MODULE_V4
{
ULONG ulChannelMapCfg ; // board dependent parameter: Channel combination
USHORT usModuleSize ; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
USHORT usPrivateReserved ; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
// MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
USHORT usReserved ;
UCHAR ucExtMemoryID ; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
UCHAR ucMemoryType ; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
UCHAR ucChannelNum ; // Number of channels present in this module config
UCHAR ucChannelWidth ; // 0 - 32 bits; 1 - 64 bits
UCHAR ucDensity ; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
UCHAR ucFlag ; // To enable/disable functionalities based on memory type
UCHAR ucMisc ; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
UCHAR ucVREFI ; // board dependent parameter
UCHAR ucNPL_RT ; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
UCHAR ucPreamble ; // [7:4] Write Preamble, [3:0] Read Preamble
UCHAR ucMemorySize ; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
// Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
UCHAR ucReserved [ 3 ] ;
//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
union {
USHORT usEMRS2Value ; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
USHORT usDDR3_Reserved ;
} ;
union {
USHORT usEMRS3Value ; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
USHORT usDDR3_MR3 ; // Used for DDR3 memory
} ;
UCHAR ucMemoryVenderID ; // Predefined, If not predefined, vendor detection table gets executed
UCHAR ucRefreshRateFactor ; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
UCHAR ucReserved2 [ 2 ] ;
ATOM_MEMORY_TIMING_FORMAT asMemTiming [ 5 ] ; //Memory Timing block sort from lower clock to higher clock
} ATOM_VRAM_MODULE_V4 ;
# define VRAM_MODULE_V4_MISC_RANK_MASK 0x3
# define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1
# define VRAM_MODULE_V4_MISC_BL_MASK 0x4
# define VRAM_MODULE_V4_MISC_BL8 0x4
# define VRAM_MODULE_V4_MISC_DUAL_CS 0x10
typedef struct _ATOM_VRAM_MODULE_V5
{
ULONG ulChannelMapCfg ; // board dependent parameter: Channel combination
USHORT usModuleSize ; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE
USHORT usPrivateReserved ; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
// MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
USHORT usReserved ;
UCHAR ucExtMemoryID ; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module
UCHAR ucMemoryType ; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
UCHAR ucChannelNum ; // Number of channels present in this module config
UCHAR ucChannelWidth ; // 0 - 32 bits; 1 - 64 bits
UCHAR ucDensity ; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
UCHAR ucFlag ; // To enable/disable functionalities based on memory type
UCHAR ucMisc ; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8
UCHAR ucVREFI ; // board dependent parameter
UCHAR ucNPL_RT ; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters
UCHAR ucPreamble ; // [7:4] Write Preamble, [3:0] Read Preamble
UCHAR ucMemorySize ; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!!
// Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
UCHAR ucReserved [ 3 ] ;
//compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level
USHORT usEMRS2Value ; // EMRS2 Value is used for GDDR2 and GDDR4 memory type
USHORT usEMRS3Value ; // EMRS3 Value is used for GDDR2 and GDDR4 memory type
UCHAR ucMemoryVenderID ; // Predefined, If not predefined, vendor detection table gets executed
UCHAR ucRefreshRateFactor ; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
UCHAR ucFIFODepth ; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth
UCHAR ucCDR_Bandwidth ; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming [ 5 ] ; //Memory Timing block sort from lower clock to higher clock
} ATOM_VRAM_MODULE_V5 ;
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_VRAM_INFO_V2
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucNumOfVRAMModule ;
ATOM_VRAM_MODULE aVramInfo [ ATOM_MAX_NUMBER_OF_VRAM_MODULE ] ; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
} ATOM_VRAM_INFO_V2 ;
typedef struct _ATOM_VRAM_INFO_V3
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMemAdjustTblOffset ; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
USHORT usMemClkPatchTblOffset ; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
USHORT usRerseved ;
UCHAR aVID_PinsShift [ 9 ] ; // 8 bit strap maximum+terminator
UCHAR ucNumOfVRAMModule ;
ATOM_VRAM_MODULE aVramInfo [ ATOM_MAX_NUMBER_OF_VRAM_MODULE ] ; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
ATOM_INIT_REG_BLOCK asMemPatch ; // for allocation
// ATOM_INIT_REG_BLOCK aMemAdjust;
} ATOM_VRAM_INFO_V3 ;
# define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3
2008-11-09 22:37:51 -07:00
typedef struct _ATOM_VRAM_INFO_V4
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMemAdjustTblOffset ; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
USHORT usMemClkPatchTblOffset ; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
USHORT usRerseved ;
UCHAR ucMemDQ7_0ByteRemap ; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
ULONG ulMemDQ7_0BitRemap ; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
UCHAR ucReservde [ 4 ] ;
UCHAR ucNumOfVRAMModule ;
ATOM_VRAM_MODULE_V4 aVramInfo [ ATOM_MAX_NUMBER_OF_VRAM_MODULE ] ; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
ATOM_INIT_REG_BLOCK asMemPatch ; // for allocation
// ATOM_INIT_REG_BLOCK aMemAdjust;
} ATOM_VRAM_INFO_V4 ;
2008-07-25 16:56:23 -06:00
typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR aVID_PinsShift [ 9 ] ; //8 bit strap maximum+terminator
} ATOM_VRAM_GPIO_DETECTION_INFO ;
typedef struct _ATOM_MEMORY_TRAINING_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucTrainingLoop ;
UCHAR ucReserved [ 3 ] ;
ATOM_INIT_REG_BLOCK asMemTrainingSetting ;
} ATOM_MEMORY_TRAINING_INFO ;
typedef struct SW_I2C_CNTL_DATA_PARAMETERS
{
UCHAR ucControl ;
UCHAR ucData ;
UCHAR ucSatus ;
UCHAR ucTemp ;
} SW_I2C_CNTL_DATA_PARAMETERS ;
# define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS
typedef struct _SW_I2C_IO_DATA_PARAMETERS
{
USHORT GPIO_Info ;
UCHAR ucAct ;
UCHAR ucData ;
} SW_I2C_IO_DATA_PARAMETERS ;
# define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS
/****************************SW I2C CNTL DEFINITIONS**********************/
# define SW_I2C_IO_RESET 0
# define SW_I2C_IO_GET 1
# define SW_I2C_IO_DRIVE 2
# define SW_I2C_IO_SET 3
# define SW_I2C_IO_START 4
# define SW_I2C_IO_CLOCK 0
# define SW_I2C_IO_DATA 0x80
# define SW_I2C_IO_ZERO 0
# define SW_I2C_IO_ONE 0x100
# define SW_I2C_CNTL_READ 0
# define SW_I2C_CNTL_WRITE 1
# define SW_I2C_CNTL_START 2
# define SW_I2C_CNTL_STOP 3
# define SW_I2C_CNTL_OPEN 4
# define SW_I2C_CNTL_CLOSE 5
# define SW_I2C_CNTL_WRITE1BIT 6
//==============================VESA definition Portion===============================
# define VESA_OEM_PRODUCT_REV '01.00'
# define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support
# define VESA_MODE_WIN_ATTRIBUTE 7
# define VESA_WIN_SIZE 64
typedef struct _PTR_32_BIT_STRUCTURE
{
USHORT Offset16 ;
USHORT Segment16 ;
} PTR_32_BIT_STRUCTURE ;
typedef union _PTR_32_BIT_UNION
{
PTR_32_BIT_STRUCTURE SegmentOffset ;
ULONG Ptr32_Bit ;
} PTR_32_BIT_UNION ;
typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE
{
UCHAR VbeSignature [ 4 ] ;
USHORT VbeVersion ;
PTR_32_BIT_UNION OemStringPtr ;
UCHAR Capabilities [ 4 ] ;
PTR_32_BIT_UNION VideoModePtr ;
USHORT TotalMemory ;
} VBE_1_2_INFO_BLOCK_UPDATABLE ;
typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE
{
VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock ;
USHORT OemSoftRev ;
PTR_32_BIT_UNION OemVendorNamePtr ;
PTR_32_BIT_UNION OemProductNamePtr ;
PTR_32_BIT_UNION OemProductRevPtr ;
} VBE_2_0_INFO_BLOCK_UPDATABLE ;
typedef union _VBE_VERSION_UNION
{
VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock ;
VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock ;
} VBE_VERSION_UNION ;
typedef struct _VBE_INFO_BLOCK
{
VBE_VERSION_UNION UpdatableVBE_Info ;
UCHAR Reserved [ 222 ] ;
UCHAR OemData [ 256 ] ;
} VBE_INFO_BLOCK ;
typedef struct _VBE_FP_INFO
{
USHORT HSize ;
USHORT VSize ;
USHORT FPType ;
UCHAR RedBPP ;
UCHAR GreenBPP ;
UCHAR BlueBPP ;
UCHAR ReservedBPP ;
ULONG RsvdOffScrnMemSize ;
ULONG RsvdOffScrnMEmPtr ;
UCHAR Reserved [ 14 ] ;
} VBE_FP_INFO ;
typedef struct _VESA_MODE_INFO_BLOCK
{
// Mandatory information for all VBE revisions
USHORT ModeAttributes ; // dw ? ; mode attributes
UCHAR WinAAttributes ; // db ? ; window A attributes
UCHAR WinBAttributes ; // db ? ; window B attributes
USHORT WinGranularity ; // dw ? ; window granularity
USHORT WinSize ; // dw ? ; window size
USHORT WinASegment ; // dw ? ; window A start segment
USHORT WinBSegment ; // dw ? ; window B start segment
ULONG WinFuncPtr ; // dd ? ; real mode pointer to window function
USHORT BytesPerScanLine ; // dw ? ; bytes per scan line
//; Mandatory information for VBE 1.2 and above
USHORT XResolution ; // dw ? ; horizontal resolution in pixels or characters
USHORT YResolution ; // dw ? ; vertical resolution in pixels or characters
UCHAR XCharSize ; // db ? ; character cell width in pixels
UCHAR YCharSize ; // db ? ; character cell height in pixels
UCHAR NumberOfPlanes ; // db ? ; number of memory planes
UCHAR BitsPerPixel ; // db ? ; bits per pixel
UCHAR NumberOfBanks ; // db ? ; number of banks
UCHAR MemoryModel ; // db ? ; memory model type
UCHAR BankSize ; // db ? ; bank size in KB
UCHAR NumberOfImagePages ; // db ? ; number of images
UCHAR ReservedForPageFunction ; //db 1 ; reserved for page function
//; Direct Color fields(required for direct/6 and YUV/7 memory models)
UCHAR RedMaskSize ; // db ? ; size of direct color red mask in bits
UCHAR RedFieldPosition ; // db ? ; bit position of lsb of red mask
UCHAR GreenMaskSize ; // db ? ; size of direct color green mask in bits
UCHAR GreenFieldPosition ; // db ? ; bit position of lsb of green mask
UCHAR BlueMaskSize ; // db ? ; size of direct color blue mask in bits
UCHAR BlueFieldPosition ; // db ? ; bit position of lsb of blue mask
UCHAR RsvdMaskSize ; // db ? ; size of direct color reserved mask in bits
UCHAR RsvdFieldPosition ; // db ? ; bit position of lsb of reserved mask
UCHAR DirectColorModeInfo ; // db ? ; direct color mode attributes
//; Mandatory information for VBE 2.0 and above
ULONG PhysBasePtr ; // dd ? ; physical address for flat memory frame buffer
ULONG Reserved_1 ; // dd 0 ; reserved - always set to 0
USHORT Reserved_2 ; // dw 0 ; reserved - always set to 0
//; Mandatory information for VBE 3.0 and above
USHORT LinBytesPerScanLine ; // dw ? ; bytes per scan line for linear modes
UCHAR BnkNumberOfImagePages ; // db ? ; number of images for banked modes
UCHAR LinNumberOfImagPages ; // db ? ; number of images for linear modes
UCHAR LinRedMaskSize ; // db ? ; size of direct color red mask(linear modes)
UCHAR LinRedFieldPosition ; // db ? ; bit position of lsb of red mask(linear modes)
UCHAR LinGreenMaskSize ; // db ? ; size of direct color green mask(linear modes)
UCHAR LinGreenFieldPosition ; // db ? ; bit position of lsb of green mask(linear modes)
UCHAR LinBlueMaskSize ; // db ? ; size of direct color blue mask(linear modes)
UCHAR LinBlueFieldPosition ; // db ? ; bit position of lsb of blue mask(linear modes)
UCHAR LinRsvdMaskSize ; // db ? ; size of direct color reserved mask(linear modes)
UCHAR LinRsvdFieldPosition ; // db ? ; bit position of lsb of reserved mask(linear modes)
ULONG MaxPixelClock ; // dd ? ; maximum pixel clock(in Hz) for graphics mode
UCHAR Reserved ; // db 190 dup (0)
} VESA_MODE_INFO_BLOCK ;
// BIOS function CALLS
# define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 // ATI Extended Function code
# define ATOM_BIOS_FUNCTION_COP_MODE 0x00
# define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04
# define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05
# define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06
# define ATOM_BIOS_FUNCTION_GET_DDC 0x0B
# define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E
# define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F
# define ATOM_BIOS_FUNCTION_STV_STD 0x16
# define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17
# define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18
# define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82
# define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83
# define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84
# define ATOM_BIOS_FUNCTION_HW_ICON 0x8A
# define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B
# define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 // Sub function 80
# define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 // Sub function 80
# define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D
# define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E
# define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F
# define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 // Sub function 03
# define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 // Sub function 7
# define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 // Notify caller the current thermal state
# define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 // Notify caller the current critical state
# define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 // Sub function 85
# define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900 // Sub function 89
# define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 // Notify caller that ADC is supported
# define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 // Set DPMS
# define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 // BL: Sub function 01
# define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 // BL: Sub function 02
# define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 // BH Parameter for DPMS ON.
# define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 // BH Parameter for DPMS STANDBY
# define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 // BH Parameter for DPMS SUSPEND
# define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 // BH Parameter for DPMS OFF
# define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED)
# define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L
# define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L
# define ATOM_BIOS_REG_LOW_MASK 0x000000FFL
// structure used for VBIOS only
//DispOutInfoTable
typedef struct _ASIC_TRANSMITTER_INFO
{
USHORT usTransmitterObjId ;
USHORT usSupportDevice ;
UCHAR ucTransmitterCmdTblId ;
UCHAR ucConfig ;
UCHAR ucEncoderID ; //available 1st encoder ( default )
UCHAR ucOptionEncoderID ; //available 2nd encoder ( optional )
UCHAR uc2ndEncoderID ;
UCHAR ucReserved ;
} ASIC_TRANSMITTER_INFO ;
typedef struct _ASIC_ENCODER_INFO
{
UCHAR ucEncoderID ;
UCHAR ucEncoderConfig ;
USHORT usEncoderCmdTblId ;
} ASIC_ENCODER_INFO ;
typedef struct _ATOM_DISP_OUT_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT ptrTransmitterInfo ;
USHORT ptrEncoderInfo ;
ASIC_TRANSMITTER_INFO asTransmitterInfo [ 1 ] ;
ASIC_ENCODER_INFO asEncoderInfo [ 1 ] ;
} ATOM_DISP_OUT_INFO ;
// DispDevicePriorityInfo
typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT asDevicePriority [ 16 ] ;
} ATOM_DISPLAY_DEVICE_PRIORITY_INFO ;
//ProcessAuxChannelTransactionTable
typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
{
USHORT lpAuxRequest ;
USHORT lpDataOut ;
UCHAR ucChannelID ;
union
{
UCHAR ucReplyStatus ;
UCHAR ucDelay ;
} ;
UCHAR ucDataOutLen ;
UCHAR ucReserved ;
} PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS ;
# define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS
//GetSinkType
typedef struct _DP_ENCODER_SERVICE_PARAMETERS
{
USHORT ucLinkClock ;
union
{
UCHAR ucConfig ; // for DP training command
UCHAR ucI2cId ; // use for GET_SINK_TYPE command
} ;
UCHAR ucAction ;
UCHAR ucStatus ;
UCHAR ucLaneNum ;
UCHAR ucReserved [ 2 ] ;
} DP_ENCODER_SERVICE_PARAMETERS ;
// ucAction
# define ATOM_DP_ACTION_GET_SINK_TYPE 0x01
# define ATOM_DP_ACTION_TRAINING_START 0x02
# define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03
# define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04
# define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05
# define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06
2008-11-09 22:37:51 -07:00
# define ATOM_DP_ACTION_BLANKING 0x07
2008-07-25 16:56:23 -06:00
// ucConfig
# define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03
# define ATOM_DP_CONFIG_DIG1_ENCODER 0x00
# define ATOM_DP_CONFIG_DIG2_ENCODER 0x01
# define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02
# define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04
# define ATOM_DP_CONFIG_LINK_A 0x00
# define ATOM_DP_CONFIG_LINK_B 0x04
# define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
// DP_TRAINING_TABLE
# define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR
# define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 )
# define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16 )
# define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24 )
# define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32)
# define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40)
# define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48)
# define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60)
# define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64)
# define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72)
# define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76)
# define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80)
typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
{
UCHAR ucI2CSpeed ;
union
{
UCHAR ucRegIndex ;
UCHAR ucStatus ;
} ;
USHORT lpI2CDataOut ;
UCHAR ucFlag ;
UCHAR ucTransBytes ;
UCHAR ucSlaveAddr ;
UCHAR ucLineNumber ;
} PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS ;
# define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
//ucFlag
# define HW_I2C_WRITE 1
# define HW_I2C_READ 0
/****************************************************************************/
//Portion VI: Definitinos being oboselete
/****************************************************************************/
//==========================================================================================
//Remove the definitions below when driver is ready!
typedef struct _ATOM_DAC_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMaxFrequency ; // in 10kHz unit
USHORT usReserved ;
} ATOM_DAC_INFO ;
typedef struct _COMPASSIONATE_DATA
{
ATOM_COMMON_TABLE_HEADER sHeader ;
//============================== DAC1 portion
UCHAR ucDAC1_BG_Adjustment ;
UCHAR ucDAC1_DAC_Adjustment ;
USHORT usDAC1_FORCE_Data ;
//============================== DAC2 portion
UCHAR ucDAC2_CRT2_BG_Adjustment ;
UCHAR ucDAC2_CRT2_DAC_Adjustment ;
USHORT usDAC2_CRT2_FORCE_Data ;
USHORT usDAC2_CRT2_MUX_RegisterIndex ;
UCHAR ucDAC2_CRT2_MUX_RegisterInfo ; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
UCHAR ucDAC2_NTSC_BG_Adjustment ;
UCHAR ucDAC2_NTSC_DAC_Adjustment ;
USHORT usDAC2_TV1_FORCE_Data ;
USHORT usDAC2_TV1_MUX_RegisterIndex ;
UCHAR ucDAC2_TV1_MUX_RegisterInfo ; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
UCHAR ucDAC2_CV_BG_Adjustment ;
UCHAR ucDAC2_CV_DAC_Adjustment ;
USHORT usDAC2_CV_FORCE_Data ;
USHORT usDAC2_CV_MUX_RegisterIndex ;
UCHAR ucDAC2_CV_MUX_RegisterInfo ; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low
UCHAR ucDAC2_PAL_BG_Adjustment ;
UCHAR ucDAC2_PAL_DAC_Adjustment ;
USHORT usDAC2_TV2_FORCE_Data ;
} COMPASSIONATE_DATA ;
/****************************Supported Device Info Table Definitions**********************/
// ucConnectInfo:
// [7:4] - connector type
// = 1 - VGA connector
// = 2 - DVI-I
// = 3 - DVI-D
// = 4 - DVI-A
// = 5 - SVIDEO
// = 6 - COMPOSITE
// = 7 - LVDS
// = 8 - DIGITAL LINK
// = 9 - SCART
// = 0xA - HDMI_type A
// = 0xB - HDMI_type B
// = 0xE - Special case1 (DVI+DIN)
// Others=TBD
// [3:0] - DAC Associated
// = 0 - no DAC
// = 1 - DACA
// = 2 - DACB
// = 3 - External DAC
// Others=TBD
//
typedef struct _ATOM_CONNECTOR_INFO
{
# if ATOM_BIG_ENDIAN
UCHAR bfConnectorType : 4 ;
UCHAR bfAssociatedDAC : 4 ;
# else
UCHAR bfAssociatedDAC : 4 ;
UCHAR bfConnectorType : 4 ;
# endif
} ATOM_CONNECTOR_INFO ;
typedef union _ATOM_CONNECTOR_INFO_ACCESS
{
ATOM_CONNECTOR_INFO sbfAccess ;
UCHAR ucAccess ;
} ATOM_CONNECTOR_INFO_ACCESS ;
typedef struct _ATOM_CONNECTOR_INFO_I2C
{
ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ;
} ATOM_CONNECTOR_INFO_I2C ;
typedef struct _ATOM_SUPPORTED_DEVICES_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
ATOM_CONNECTOR_INFO_I2C asConnInfo [ ATOM_MAX_SUPPORTED_DEVICE_INFO ] ;
} ATOM_SUPPORTED_DEVICES_INFO ;
# define NO_INT_SRC_MAPPED 0xFF
typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP
{
UCHAR ucIntSrcBitmap ;
} ATOM_CONNECTOR_INC_SRC_BITMAP ;
typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
ATOM_CONNECTOR_INFO_I2C asConnInfo [ ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ] ;
ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo [ ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ] ;
} ATOM_SUPPORTED_DEVICES_INFO_2 ;
typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usDeviceSupport ;
ATOM_CONNECTOR_INFO_I2C asConnInfo [ ATOM_MAX_SUPPORTED_DEVICE ] ;
ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo [ ATOM_MAX_SUPPORTED_DEVICE ] ;
} ATOM_SUPPORTED_DEVICES_INFO_2d1 ;
# define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1
typedef struct _ATOM_MISC_CONTROL_INFO
{
USHORT usFrequency ;
UCHAR ucPLL_ChargePump ; // PLL charge-pump gain control
UCHAR ucPLL_DutyCycle ; // PLL duty cycle control
UCHAR ucPLL_VCO_Gain ; // PLL VCO gain control
UCHAR ucPLL_VoltageSwing ; // PLL driver voltage swing control
} ATOM_MISC_CONTROL_INFO ;
# define ATOM_MAX_MISC_INFO 4
typedef struct _ATOM_TMDS_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usMaxFrequency ; // in 10Khz
ATOM_MISC_CONTROL_INFO asMiscInfo [ ATOM_MAX_MISC_INFO ] ;
} ATOM_TMDS_INFO ;
typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE
{
UCHAR ucTVStandard ; //Same as TV standards defined above,
UCHAR ucPadding [ 1 ] ;
} ATOM_ENCODER_ANALOG_ATTRIBUTE ;
typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE
{
UCHAR ucAttribute ; //Same as other digital encoder attributes defined above
UCHAR ucPadding [ 1 ] ;
} ATOM_ENCODER_DIGITAL_ATTRIBUTE ;
typedef union _ATOM_ENCODER_ATTRIBUTE
{
ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib ;
ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib ;
} ATOM_ENCODER_ATTRIBUTE ;
typedef struct _DVO_ENCODER_CONTROL_PARAMETERS
{
USHORT usPixelClock ;
USHORT usEncoderID ;
UCHAR ucDeviceType ; //Use ATOM_DEVICE_xxx1_Index to indicate device type only.
UCHAR ucAction ; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT
ATOM_ENCODER_ATTRIBUTE usDevAttr ;
} DVO_ENCODER_CONTROL_PARAMETERS ;
typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION
{
DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder ;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved ; //Caller doesn't need to init this portion
} DVO_ENCODER_CONTROL_PS_ALLOCATION ;
# define ATOM_XTMDS_ASIC_SI164_ID 1
# define ATOM_XTMDS_ASIC_SI178_ID 2
# define ATOM_XTMDS_ASIC_TFP513_ID 3
# define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001
# define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002
# define ATOM_XTMDS_MVPU_FPGA 0x00000004
typedef struct _ATOM_XTMDS_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
USHORT usSingleLinkMaxFrequency ;
ATOM_I2C_ID_CONFIG_ACCESS sucI2cId ; //Point the ID on which I2C is used to control external chip
UCHAR ucXtransimitterID ;
UCHAR ucSupportedLink ; // Bit field, bit0=1, single link supported;bit1=1,dual link supported
UCHAR ucSequnceAlterID ; // Even with the same external TMDS asic, it's possible that the program seqence alters
// due to design. This ID is used to alert driver that the sequence is not "standard"!
UCHAR ucMasterAddress ; // Address to control Master xTMDS Chip
UCHAR ucSlaveAddress ; // Address to control Slave xTMDS Chip
} ATOM_XTMDS_INFO ;
typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS
{
UCHAR ucEnable ; // ATOM_ENABLE=On or ATOM_DISABLE=Off
UCHAR ucDevice ; // ATOM_DEVICE_DFP1_INDEX....
UCHAR ucPadding [ 2 ] ;
} DFP_DPMS_STATUS_CHANGE_PARAMETERS ;
/****************************Legacy Power Play Table Definitions **********************/
//Definitions for ulPowerPlayMiscInfo
# define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L
# define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L
# define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L
# define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L
# define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L
# define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L
# define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L
# define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L
# define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program
# define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L
# define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L
# define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L
# define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L
# define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L
# define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L
# define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L
# define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L
# define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L
# define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L
# define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L
# define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L
# define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved
# define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20
# define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L
# define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L
# define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L
# define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L //When set, Dynamic
# define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L //When set, Dynamic
# define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L //When set, This mode is for acceleated 3D mode
# define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks)
# define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28
# define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L
# define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L
# define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L
# define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L
# define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L
# define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L
# define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L
# define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption.
//If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback
# define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L
# define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L
# define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L
//ucTableFormatRevision=1
//ucTableContentRevision=1
typedef struct _ATOM_POWERMODE_INFO
{
ULONG ulMiscInfo ; //The power level should be arranged in ascending order
ULONG ulReserved1 ; // must set to 0
ULONG ulReserved2 ; // must set to 0
USHORT usEngineClock ;
USHORT usMemoryClock ;
UCHAR ucVoltageDropIndex ; // index to GPIO table
UCHAR ucSelectedPanel_RefreshRate ; // panel refresh rate
UCHAR ucMinTemperature ;
UCHAR ucMaxTemperature ;
UCHAR ucNumPciELanes ; // number of PCIE lanes
} ATOM_POWERMODE_INFO ;
//ucTableFormatRevision=2
//ucTableContentRevision=1
typedef struct _ATOM_POWERMODE_INFO_V2
{
ULONG ulMiscInfo ; //The power level should be arranged in ascending order
ULONG ulMiscInfo2 ;
ULONG ulEngineClock ;
ULONG ulMemoryClock ;
UCHAR ucVoltageDropIndex ; // index to GPIO table
UCHAR ucSelectedPanel_RefreshRate ; // panel refresh rate
UCHAR ucMinTemperature ;
UCHAR ucMaxTemperature ;
UCHAR ucNumPciELanes ; // number of PCIE lanes
} ATOM_POWERMODE_INFO_V2 ;
//ucTableFormatRevision=2
//ucTableContentRevision=2
typedef struct _ATOM_POWERMODE_INFO_V3
{
ULONG ulMiscInfo ; //The power level should be arranged in ascending order
ULONG ulMiscInfo2 ;
ULONG ulEngineClock ;
ULONG ulMemoryClock ;
UCHAR ucVoltageDropIndex ; // index to Core (VDDC) votage table
UCHAR ucSelectedPanel_RefreshRate ; // panel refresh rate
UCHAR ucMinTemperature ;
UCHAR ucMaxTemperature ;
UCHAR ucNumPciELanes ; // number of PCIE lanes
UCHAR ucVDDCI_VoltageDropIndex ; // index to VDDCI votage table
} ATOM_POWERMODE_INFO_V3 ;
# define ATOM_MAX_NUMBEROF_POWER_BLOCK 8
# define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01
# define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06
# define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 // Andigilog
typedef struct _ATOM_POWERPLAY_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucOverdriveThermalController ;
UCHAR ucOverdriveI2cLine ;
UCHAR ucOverdriveIntBitmap ;
UCHAR ucOverdriveControllerAddress ;
UCHAR ucSizeOfPowerModeEntry ;
UCHAR ucNumOfPowerModeEntries ;
ATOM_POWERMODE_INFO asPowerPlayInfo [ ATOM_MAX_NUMBEROF_POWER_BLOCK ] ;
} ATOM_POWERPLAY_INFO ;
typedef struct _ATOM_POWERPLAY_INFO_V2
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucOverdriveThermalController ;
UCHAR ucOverdriveI2cLine ;
UCHAR ucOverdriveIntBitmap ;
UCHAR ucOverdriveControllerAddress ;
UCHAR ucSizeOfPowerModeEntry ;
UCHAR ucNumOfPowerModeEntries ;
ATOM_POWERMODE_INFO_V2 asPowerPlayInfo [ ATOM_MAX_NUMBEROF_POWER_BLOCK ] ;
} ATOM_POWERPLAY_INFO_V2 ;
typedef struct _ATOM_POWERPLAY_INFO_V3
{
ATOM_COMMON_TABLE_HEADER sHeader ;
UCHAR ucOverdriveThermalController ;
UCHAR ucOverdriveI2cLine ;
UCHAR ucOverdriveIntBitmap ;
UCHAR ucOverdriveControllerAddress ;
UCHAR ucSizeOfPowerModeEntry ;
UCHAR ucNumOfPowerModeEntries ;
ATOM_POWERMODE_INFO_V3 asPowerPlayInfo [ ATOM_MAX_NUMBEROF_POWER_BLOCK ] ;
} ATOM_POWERPLAY_INFO_V3 ;
/**************************************************************************/
// Following definitions are for compatiblity issue in different SW components.
# define ATOM_MASTER_DATA_TABLE_REVISION 0x01
# define Object_Info Object_Header
# define AdjustARB_SEQ MC_InitParameter
# define VRAM_GPIO_DetectionInfo VoltageObjectInfo
# define ASIC_VDDCI_Info ASIC_ProfilingInfo
# define ASIC_MVDDQ_Info MemoryTrainingInfo
# define SS_Info PPLL_SS_Info
# define ASIC_MVDDC_Info ASIC_InternalSS_Info
# define DispDevicePriorityInfo SaveRestoreInfo
# define DispOutInfo TV_VideoMode
# define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE
# define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE
//New device naming, remove them when both DAL/VBIOS is ready
# define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
# define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS
# define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS
# define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS
# define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS
# define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION
# define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT
# define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT
# define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX
# define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX
# define ATOM_DEVICE_DFP2I_INDEX 0x00000009
# define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX)
# define ATOM_S0_DFP1I ATOM_S0_DFP1
# define ATOM_S0_DFP1X ATOM_S0_DFP2
# define ATOM_S0_DFP2I 0x00200000L
# define ATOM_S0_DFP2Ib2 0x20
# define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE
# define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE
# define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L
# define ATOM_S2_DFP2I_DPMS_STATEb3 0x02
# define ATOM_S3_DFP2I_ACTIVEb1 0x02
# define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE
# define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE
# define ATOM_S3_DFP2I_ACTIVE 0x00000200L
# define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE
# define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE
# define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L
# define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02
# define ATOM_S5_DOS_REQ_DFP2Ib1 0x02
# define ATOM_S5_DOS_REQ_DFP2I 0x0200
# define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1
# define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2
# define ATOM_S6_ACC_REQ_DFP2Ib3 0x02
# define ATOM_S6_ACC_REQ_DFP2I 0x02000000L
# define TMDS1XEncoderControl DVOEncoderControl
# define DFP1XOutputControl DVOOutputControl
# define ExternalDFPOutputControl DFP1XOutputControl
# define EnableExternalTMDS_Encoder TMDS1XEncoderControl
# define DFP1IOutputControl TMDSAOutputControl
# define DFP2IOutputControl LVTMAOutputControl
# define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
# define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
# define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS
# define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION
# define ucDac1Standard ucDacStandard
# define ucDac2Standard ucDacStandard
# define TMDS1EncoderControl TMDSAEncoderControl
# define TMDS2EncoderControl LVTMAEncoderControl
# define DFP1OutputControl TMDSAOutputControl
# define DFP2OutputControl LVTMAOutputControl
# define CRT1OutputControl DAC1OutputControl
# define CRT2OutputControl DAC2OutputControl
//These two lines will be removed for sure in a few days, will follow up with Michael V.
# define EnableLVDS_SS EnableSpreadSpectrumOnPPLL
# define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL
/*********************************************************************************/
# pragma pack() // BIOS data must use byte aligment
# endif /* _ATOMBIOS_H */
