In my last push I forgot to convert users of drm_update_vblank_count
over to drm_vblank_get/put, since that's where any interrupt off->on
update accounting is done now. Since the modeset ioctl did something
similar (an open coded update of the counter) convert it over to using
get/put too, which saves us from having to deal with every combination
of interrupt off & on between calls.
The current code uses the hw vblank counter exclusively, which can lead
to wakeups during the active period rather than during the vblank period
if the hw counter counts displayed frames rather than vblank periods.
This change coverts the code over to using the counter while interrupts
are enabled, fixing that issue. It also includes a couple of related
changes: one to not enable the new enable/disable behavior until the
modeset ioctl is called (to preserve old client behavior) and another to
account for lost events due to mode setting with the new counter scheme.
BSD will require similar changes to its drm_irq.c code, but they should
be straightforward.
Without kernel modesetting, this requires cooperation of the userspace
modesetting driver. We may have to leave the vblank interrupt enabled otherwise
to avoid problems.
Only compensate when the driver counter actually appears to have moved
backwards.
The compensation deltas need to be incremental instead of absolute; drop the
vblank_offset field and just use atomic_sub().
Turns out the radeon driver is affected by the same problem that prompted i915
to revert to less useful counter flipping at the end of the vblank interval. In
the long term, we can hopefully implement more reliable methods to achieve
counter flipping at the beginning of vblank, but otherwise this should be an
acceptable workaround.
This fixes at least two problems:
* The vblank_disable_fn timer callback could get called after the DRM was
de-initialized, e.g. on X server shutdown.
* Leak of vblank related resources when disabling and re-enabling the IRQ, e.g.
on an X server reset.
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
The vblank_init function wanted a couple of cleanups.
Also, drm_irq_install wasn't checking the new return value of irq_postinstall.
If it returns a failure, assume IRQs didn't get set up and take appropriate
action.
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_drv.h
shared-core/mga_irq.c
shared-core/radeon_drv.h
shared-core/radeon_irq.c
Merge in the latest master bits and update the remaining drivers (except
mach64 which math_b is working on). Also remove the 9xx hack from the i915
driver; it seems to be correct.
1. DRM_NOUVEAU_GPUOBJ_FREE
Used to free GPU objects. The obvious usage case is for Gr objects,
but notifiers can also be destroyed in the same way.
GPU objects gain a destructor method and private data fields with
this change, so other specialised cases (like notifiers) can be
implemented on top of gpuobjs.
2. DRM_NOUVEAU_CHANNEL_FREE
3. DRM_NOUVEAU_CARD_INIT
Ideally we'd do init during module load, but this isn't currently
possible. Doing init during firstopen() is bad as X has a love of
opening/closing the DRM many times during startup. Once the
modesetting-101 branch is merged this can go away.
IRQs are enabled in nouveau_card_init() now, rather than having the
X server call drmCtlInstHandler(). We'll need this for when we give
the kernel module its own channel.
4. DRM_NOUVEAU_GETPARAM
Add CHIPSET_ID value, which will return the chipset id derived
from NV_PMC_BOOT_0.
4. Use list_* in a few places, rather than home-brewed stuff.
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
- use a timer for disabling vblank events to avoid enable/disable calls too
often
- make i915 work with pre-965 chips again (would like to structure this
better, but this hack works on my test system)
If the driver doesn't support vertical blank interrupts, it won't call
drm_vblank_init(), and dev->num_crtcs will be 0.
Also fix an off-by-one test against dev->num_crtcs.
- use correct refcount variable in get/put routines
- extract counter update from drm_vblank_get
- make signal handling callback per-crtc
- update interrupt handling logic, drivers should use drm_handle_vblank
- move wakeup and counter update logic to new drm_handle_vblank routine
- fixup usage of get/put in light of counter update extraction
- fix longstanding bug in signal code, update pending counter only
*after* we're sure we'll setup signal handling
Add refcounting of user waiters to the DRM hardware lock, so that we can use the
DRM_LOCK_CONT flag more conservatively.
Also add a kernel waiter refcount that if nonzero transfers the lock for the kernel context,
when it is released. This is useful when waiting for idle and can be used
for very simple fence object driver implementations for the new memory manager.
It also resolves the AIGLX startup deadlock for the sis and the via drivers.
i810, i830 still require that the hardware lock is really taken so the deadlock remains
for those two. I'm not sure about ffb. Anyone familiar with that code?
Initialize the spinlock unconditionally when struct drm_device is filled in,
and return early in drm_locked_tasklet() if the driver doesn't support IRQs.
It looks like this would have caused signals to always get sent on the next
vertical blank, regardless of the sequence number.
(cherry picked from cf6b2c5299 commit)
When this flag is set and the target sequence is missed, wait for the next
vertical blank instead of returning immediately.
(cherry picked from 89e323e490 commit)
Jesse Barnes
Michel Dänzer
Jesse Barnes
Kristian Høgsberg
Jesse Barnes
Márton Németh
Dave Airlie
Jesse Barnes
Ben Skeggs
Eric Anholt
Jesse Barnes
Maarten Maathuis
Thomas Hellstrom