This is the directory used by meson/autotools (at least in the
.gitlab-ci configuration) so ignore the whole dir.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
LANG=C sort -u .gitignore | sponge .gitignore
This way it's easier to keep track of the entries.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Just make them properly i.e. put 0 to the Nop reg
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
It is a cleaner and less fragile way to get PCI IDs than the one
currently used by local DPorts patches.
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Make sure the kernel doesn't crash if we map something at the minimum/maximum address.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
For ARM systems with tinydrm displays attached to SPI, the bus name is
/spi but we have platform device info for the rest. Fixes
eglInitialize() failures on hx8357d since the EGL_EXT_device_drm
changes.
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Error message was invalid too, negative values aren't the number of
devices, they're errno error codes.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reported-by: Jan Vesely <jano.vesely@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Since only for those ASICs gpu reset is enabled by deafult.
Also update disable message and fix identation .
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Illegal access will cause CP hang followed by job timeout and
recovery kicking in.
Also, disable the suite for all APU ASICs until GPU
reset issues for them will be resolved and GPU reset recovery
will be enabled by default.
v2:
Add KV to deasbled APUs list and add comments regarding
necessary kernel amdgpu paramteres to run the tests.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Looks much neater on the gitlab UI, e.g. on my personal libdrm fork:
https://gitlab.freedesktop.org/danvet/drm
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
With streaming stateobjs to upload uniforms, the submit.cmds table gets
much larger, and iterating over it for each ring to ring reloc starts
getting expensive.
TODO if we have flag to pass when constructing parent rb, we could
avoid dynamically allocating this and bo_table in get_cmd() or bo2idx
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The msm_cmd isn't refcount'd, so with stateobj rb's that have
independent lifecycle, this is no longer a safe thing to do.
Really, now that there is a bo-cache for rb's, fd_ringbuffer_reset()
should be deprecated because it adds a bunch of pointless complexity.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
It's usage in mesa was removed more than two years ago. And it stands
in the way of some optimizations needed to reduce the overhead of hw
stateobjs (ie. CP_SET_DRAW_STATE, where the # of cmds in the submit
ioctl goes up significantly).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For now, we want a way for gallium to be able to provide hints for the
upcoming rb suballocation. But could be useful for other things down
the road.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
drmMalloc() is already calloc()
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Seems like AI and RV requires uncashed memory mapping to be able
to pickup value written to memory by CPU after the WAIT_REG_MEM
command was already launched.
.
Enable the test for AI and RV.
v2:
Update commit description.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
v2:
Call amdgpu_bo_va_op_raw directly in amdgpu_bo_alloc_and_map_raw
Move amdgpu_bo_alloc_and_map_raw into C file to avoid including
unistd.h in amdgpu_test.h
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
To determine whether a device node is a drm device node or not, the code
currently compares the node's major number to the static drm major device
number.
This breaks the standalone vmwgfx driver on XWayland dri clients,
https://cgit.freedesktop.org/mesa/vmwgfx
and any future attempt to introduce dynamic device numbers for drm.
So instead of checking for the device major, instead check for the presence
of the /sys/dev/char/<major>:<minor>/device/drm directory.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Fixes: 4e81d4f9c9 ("intel: add generic functions to check PCI ID")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Generated using make headers_install from the drm-next
tree - git://anongit.freedesktop.org/drm/drm
branch - drm-next
commit - 2dc7bad71cd310dc94d1c9907909324dd2b0618f
The changes were as follows :-
core: (drm.h, drm_fourcc.h, drm_mode.h)
- Added client capabilities for ASPECT_RATIO and WRITEBACK_CONNECTORS
- Added Arm AFBC modifiers
- Added BROADCOM's SAND and UIF modifiers
- Added Qualcomm's modifiers
- Added some picture aspect ratio and content type options
- Added some drm mode flags
- Added writeback connector id
amdgpu:
- Added GEM domain mask
- Added some GEM flags
- Added some hardware ip flags
- Added chunk id and IB fence.
- Added some query ids
i915:
-Added an IOCTL (I915_PARAM_MMAP_GTT_COHERENT)
qxl:
- Minor changes
tegra:
- Added some comments about struct drm_tegra* members
- Modified DRM_IOCTL_TEGRA_CLOSE_CHANNEL
vc4:
- Added some members for 'struct drm_vc4_submit_cl'
Changes in v2:
- Mentioned 'libdrm' in the commit header.
Changes in v3:
- Removed the changes to radeon_drm.h, sis_drm.h and via_drm.h as suggested by
Emil Velikov <emil.l.velikov@gmail.com>
Changes in v4:
- Removed the changes to vmwgfx_drm.h as it caused a build break ie
'make check' failed.
Change-Id: I018a06f65bf4a6a68400ab252b9cd05d041299b3
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is the DRM driver for all Allwinner (sunxi) platforms.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It will make bugs like the one fixed with previous patch dead obvious.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Set/export the NM variable since it may not be set already.
Fixes: 4f08bfe96d ("*-symbol-check: Don't hard-code nm executable")
Cc: Heiko Becker <heirecka@exherbo.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
GitLab CI already captures all the stdout/stderr output from the build
process as the log. However, some other important information is hidden
in other log files.
Taken from Wayland, capture logs from the configuration process as well
as from every check.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Eric Engeström <eric.engestrom@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
[Emil: use wildcard to match the artefacts]
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Use libutil to lookup connector type names and state. This also
makes sure that the latest connector type addition "DPI" gets
printed correctly.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: f3f7266d94 "omap: annotate public functions"
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fixes: 9f45264815 "radeon: annotate public functions"
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Mark Janes <mark.a.janes@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108006
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Lucas De Marchi
Leo Liu
François Tigeot
Andrey Grodzovsky
Christian König
Eric Anholt
Eric Engestrom
Daniel Vetter
Rob Clark
Thomas Hellstrom
Emil Velikov
Emil Velikov
Ayan Kumar Halder
Ezequiel Garcia
Daniel Stone
Stefan Agner