code duplication, and it also hands you the map pointer so you don't
need to re-find it.
- Remove the permanent maps flag. Instead, for register and framebuffer
maps, we always check whether there's already a map of that type and
offset around. Move the Radeon map initialization into presetup (first
open) so it happens again after every takedown.
- Remove the split cleanup of maps between driver takedown (last close) and
cleanup (module unload). Instead, always tear down maps on takedown,
and drivers can recreate them on first open.
- Make MGA always use addmap, instead of allocating consistent memory in
the PCI case and then faking up a map for it, which accomplished nearly
the same thing, in a different order. Note that the maps are exposed to
the user again: we may want to expose a flag to avoid this, but it's
not a security concern, and saves us a lot of code.
- Remove rmmaps in the MGA driver. Since the function is only called during
takedown anyway, we can let them die a natural death.
- Make removal of maps happen in one function, which is called by both
drm_takedown and drm_rmmap_ioctl.
Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma),
radeon, savage
This patch adds serveral new ioctls and a new query to get_param query to
support PCI MGA cards.
Two ioctls were added to implement interrupt based waiting. With this
change, the client-side driver no longer needs to map the primary DMA
region or the MMIO region. Previously, end-of-frame waiting was done by
busy waiting in the client-side driver until one of the MMIO registers
(the current DMA pointer) matched a pointer to the end of primary DMA
space. By using interrupts, the busy waiting and the extra mappings are
removed.
A third ioctl was added to bootstrap DMA. This ioctl, which is used by the
X-server, moves a *LOT* of code from the X-server into the kernel. This
allows the kernel to do whatever needs to be done to setup DMA buffers.
The entire process and the locations of the buffers are hidden from
user-mode.
Additionally, a get_param query was added to differentiate between G4x0
cards and G550 cards. A gap was left in the numbering sequence so that,
if needed, G450 cards could be distinguished from G400 cards. According
to Ville Syrjälä, the G4x0 cards and the G550 cards handle
anisotropic filtering differently. This seems the most compatible way
to let the client-side driver know which card it's own. Doing this very
small change now eliminates the need to bump the DRM minor version
twice.
http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2
A number of ioctl handlers in linux-core were also modified so that they
could be called in-kernel. In these cases, the in-kernel callable
version kept the existing name (e.g., drm_agp_acquire) and the ioctl
handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl).
This patch also replaces the drm_agp_do_release function with
drm_agp_release. drm_agp_release (drm_core_agp_release in the previous
patch) is very similar to drm_agp_do_release, and I saw no reason to
have both.
This commit *breaks the build* on BSD. Eric said that he would make the
required updates to the BSD side soon.
Xorg bug: 3259 Reviewed by: Eric Anholt
linux-core to free pci memory without freeing the structure. Linux-core
internals often create pci dma handle structures on the stack due to
the lack of a drm_local_map_t to store them in properly. Fix the
original drm_pci_free to actually free the dma handle structure instead
of leaking it.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
There's two choices when fb is or isn't loaded as we treat ourselves as a
PCI driver in the latter case.
If we are a PCI driver, then register the suspend/resume functions
directly. If not, then we register as a sysdev and pick up the
suspend/resume actions and pump them down into a generic *power
function.
It'll be nice when this little mess is sorted out with regard to being a
real PCI driver ;-/
that a device absolutely is, absolutely is not, or may or may not be
AGP. Modify the i915 DRM to use this to force all i9x5 devices to be
"AGP" (even the PCI-e devices).
Reported by: Lukas Hejtmanek
platform-specific drm_device_is_agp function. Added implementation of
this function the the Linux-specific portion of the MGA driver to
detect PCI G450 cards. Added code to the Linux-specific portion of the
generic DRM layer to not initialize AGP infrastructure if the card is
not AGP (this matches what already existed in BSD).
Bumped the driver date and the driver patch-level for MGA.
This mostly fixes bugzilla #3248. The BSD side still needs an
implementation of mga_driver_device_is_agp.
with IOMMUs and such. There is one usage of the forbidden vtophys()
left in drm_scatter.c which will be fixed up soon. This required a KPI
change for drm_pci_alloc/free() to return/use a drm_dma_handle_t that
keeps track of os-specific bits, rather than just passing around the
vaddr/busaddr/size.
Submitted by: Tonnerre Lombard (partially) Tested on: FreeBSD: Rage128
AGP/PCI Linux: Savage4 AGP/PCI
FreeBSD. Add drm_get_resource_{start|len} so linux-specific stuff
doesn't need to be in shared code.
- Fix mach64 build by using __DECONST to work around passing a const
pointer to useracc, which is unfortunately not marked const.
- Get rid of a lot of maplist code by not having dev->maplist be a pointer,
and by sticking the link entries directly in drm_local_map_t rather
than having a separate structure for the linked list.
- Factor out map uninit and removal into its own routine, rather than
duplicating in both drm_takedown() and drm_rmmap().
- Hook up more driver functions, and correct FreeBSD-specific bits of
radeon_cp.c, making radeon work.
- Baby steps towards using bus_space as we should.
The attached patch adds a new buffer type DRM_FB_BUFFER. It works like AGP
memory but uses video memory.
From: austinyuan@viatech.com.cn (fd.o bug 1668) Signed-off-by: Dave Airlie
<airlied@linux.ie>
hotplug event plus the addition of one requesting RESET. Put your
scripts in /etc/hotplug.d/drm to run. kernel class_simple generates the
ADD/REMOVE events. No cards currently request RESET, the flag is there
to stop you from resetting your boot display.
allows the mesa drivers to use a single definition of the DRM
sarea/IOCTLS located in the drm driver directory. Adjustments were made
to the 2D drivers to not include these changes. Changes to the mesa
copy of DRM were copied to the DRI copy. XFree86 bug: Reported by:
Submitted by: Reviewed by: Obtained from:
a busid that doesn't correspond to the device the DRM is attached to.
This is a breaking of backwards-compatibility only for the
multiple-DRI-head case with X Servers that don't use interface 1.1.
- Move irq_busid to drm_irq.h and make it only return the IRQ for the
current device. Retains compatibility with previous X Servers, cleans
up unnecessary code. This means no irq_busid on !__HAVE_IRQ, but can be
changed if necessary.
- Bump interface version to 1.2. This version when set signifies that the
control ioctl should ignore the irq number passed in and enable the
interrupt handler for the attached device. Otherwise it errors out when
the passed-in irq is not equal to the device's.
- Store the highest version the interface has been set to in the device.
- Fix a recursion on DRM_LOCK in irq_uninstall on FreeBSD. This leaves
irq_uninstall being done without the lock in some cases, but it was
racey anyways.
the 2D driver initializes MC_FB_LOCATION and related registers sanely
the DRM deduces the layout from these registers
clients use the new SETPARAM ioctl to tell the DRM where they think the
framebuffer is located in the card's address space
the DRM uses all this information to check client state and fix it up if
necessary
This is a prerequisite for things like direct rendering with IGP chips and
video capturing.
server or client to notify the DRM that it expects a certain version of
the device dependent or device independent interface. If the major
doesn't match or minor is too large, EINVAL is returned. A major of -1
means that the requestor doesn't care about that portion of the
interface. The ioctl returns the actual versions in the same struct.
- Introduce DRM DI interface version 1.1. If the server requests version
1.1, then the DRM sets the unique itself according to the busid of the
device it probed, which may then be accessed as normal using getunique.
- Request version 1.1 in libdrm's drmOpenByBusID, allowing the X Server to
request based on a BusID. Introduce a wrapper for DRM_IOCTL_SET_VERSION
and bump libdrm minor version.
- Pass the busid in DRIScreenInit if libdrm can handle both a busid and
name. This allows drmOpenByBusID to be used to find the DRM instead of
just the driver name, which allows us in the future to tie a DRM more
strongly to the device it probed to. Introduce a function
DRICreatePCIBusID which creates a busid in the form pci:oooo:bb:dd.f
similar to linux's pci_name() function. This matches the format used by
the DRM in version 1.1. libdrm knows how to match both this format and
the old PCI🅱️d:f format.
- Use the new DRICreatePCIBusID function in the *_dri.c to request the new,
more exact busid format.
from __HAVE_DMA. This will be useful for adding vblank sync support to
sis and tdfx. Rename dma_service to irq_handler, which is more
accurately what it is.
- Fix the #if _HAVE_DMA_IRQ in radeon, r128, mga, i810, i830, gamma to have
the right number of underscores. This may have been a problem in the
case that the server died without doing its DRM_IOCTL_CONTROL to
uninit.
just a single instance. Moved the PCI ID lists from <card>_drv.c in BSD
to <card>.h. The PCI ID lists include a driver private field, which may
be used by drivers for chip family or other information. Based on work
by jonsmirl.
- Make tdfx_drv.c and tdfx.h match other drivers.
- Fixed up linking of sis shared files.
Tested with Radeon and SiS on Linux and FreeBSD, including a Linux setup
with
2 SiS cards in a machine, but only one head being used (with DRI)
respectively. Splited the work out of the ioctls and renamed (with the
_ioctl prefix). Added some more documentation. Did the same for
drm_sgpsupport.h.
- Reset 'bound' flag for an agp entry after undbind succeeded in
drm_agpsupport.h (Egbert Eich).
- Ignore hw_lock for drm device if lock was set by a different instance (ie
Xserver) to prevent second server from spinning in driver release
function (currently only relevant for i8xx drm drivers) (David Dawes).
- Use the agpgart "key" for the unique handle for bindings rather than the
memory address (the key is guaranteed to be unique) (David Dawes).
Whitwell).
- Major rework of the 2D i830/i845G support, including:
- Improve VESA mode selection, and fix refresh rate selection.
- Don't duplicate functions provided in the vbe modules.
- Don't duplicate functions provided in the vgahw module.
- Rewrite memory allocation.
- Rewrite initialisation and save/restore state handling.
- Decouple the i810 support from i830 and later.
- Remove various unnecessary hacks and workarounds.
- Fix an 845G problem with the ring buffer not in pre-allocated memory.
- Fix screen blanking.
- Fix some HW cursor glitches, and turn HW cursor off at VT switch and
exit.
- Don't attempt to use the i830's function 1 entity.
- Fix problems with option handling. (David Dawes).
- Add mode VBE-aware mode handling functions to the vbe module (David
Dawes).
agp chipsets to drm_agpsupport.h, redid the card detection common code
to use a structure (avoids endian porting issues), changed the tdfx
driver to use the kernel pci id '#defines'
- Fix old-style DMA for gamma driver (please test).
- Pull out IRQ handling into drm_dma.h (please test on i810, gamma).
- Lots of general cleanups, remove compiler warnings etc.
against 2.2.18pre21
As usual, since all 2.4.0-test* kernels set LINUX_VERSION_CODE to the same
value, if you are running a 2.4.0-test kernel, you MUST be running
2.4.0-test11-pre4 or later (although anything after 2.4.0-test11-pre1
should work fine -- I tested with pre4/pre5). I expect 2.2.x support to
continue to work for all recent kernels, but I tested with 2.2.18pre21
-- we use the old intermodule symbol communication for 2.2.x kernels,
so they should all continue to work.
several fixes including: (Jeff) Really disable multitexture (Broken
since Mesa 3.4 integration.)
(Jeff) Various changes in mga_state.c in the kernel module, which includes
a fix to the bug where the first OGL application hangs the machine
w/out rendering anything. This also includes defines for the warp
registers so they are easily human readable.
(Rik and Jeff) Fixed all the schedule loops in the kernel to look like they
are supposed too.
(Jeff) Configurable agp modes: Add the option "AGPMode2x" or "AGPMode4x" to
your XF86Config file.
(Rik) Various cleanups to the mga kernel driver to make it easier to read
and debug.
(Rik) Removed alot of DRM_DEBUG statements from the kernel driver.
Eric Anholt
Jon Smirl
Dave Airlie
Alan Hourihane
Ian Romanick
Felix Kuehling
Michel Daenzer
Keith Whitwell
Leif Delgass
Jose Fonseca
David Dawes
Jeff Hartmann
Kevin E Martin
Gareth Hughes
Rik Faith
Brian Paul
Daryll Strauss