This encodes the indentation style for libdrm and can be used with
various editors. See http://editorconfig.org for instructions.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
libdrm uses spaces for indentation. Fix the two inconsistent lines in
this file.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When iterating over all the device nodes if drmProcessPciDevice()
returned an error for any node the function would return an error,
ignoring any valid nodes.
The result of this on OpenBSD where drmProcessPciDevice() results in
device nodes being opened to issue ioctls to get pci data
was that data obtained from /dev/drm0 would be ignored if /dev/drm1
could not be opened.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Implement a generic drmGetDeviceNameFromFd2() to use on non-linux
systems without sysfs.
v2: remove min < base test as requested by Emil
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
When constructing a path to a device node the minor number retrieved
from fstat needs to have the offset of the node type subtracted from it.
Control and render node types have the same major as the primary node
but each has their own block of minor types at fixed offsets.
v2: remove min < base test as requested by Emil
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
This patch fixes memory leak in error path of exynos_bo_create().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Just set the rules automatically rather than asking each contributor to
update thing locally.
v2: Silence errors if run outside of git repo. (Eric)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
xf86drm.c:3601:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
while (expected < sizeof(match)) {
^
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
DRI devices on OpenBSD are not in their own directory. They reside in
/dev with a large number of statically generated /dev nodes.
Avoid stat'ing all of /dev on OpenBSD by implementing this custom path.
v2:
- use drmGetMinorType to get node type
- adapt to drmProcessPciDevice changes
- verify drmParseSubsystemType type is PCI
- add a comment describing why this was added
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Implement drmParsePciBusInfo for OpenBSD by using the new
DRM_IOCTL_GET_PCIINFO ioctl.
v2: use drmGetMinorType to get node type instead of always
using DRM_NODE_PRIMARY.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Implement drmParsePciDeviceInfo for OpenBSD by using the new
DRM_IOCTL_GET_PCIINFO ioctl.
v2: adapt to drmParsePciDeviceInfo changes and use drmOpenMinor
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Implement drmParseSubsystemType for OpenBSD by always returning
DRM_BUS_PCI. No non-pci drm drivers are in the kernel and this is
unlikely to change anytime soon as the existing ones aren't permissively
licensed.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Implement drmGetMinorNameForFD for systems without sysfs by
adapting drm_get_device_name_for_fd() from the Mesa loader.
v2: use type parameter to select dev name instead of always
using DRM_DEV_NAME
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
All of these 'tests' cover UMS functionality which is neither being
worked on or actively maintained.
The only cases where developers touch UMS code is to unwrap it from the
KMS codepaths and ensure that those are secure.
Anyone who feels strong about having these around can revive them, but
in all honestly do consider _seriously_ what you're doing ;-)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass along DRM_DEVICE_GET_PCI_REVISION only when the individual nodes
are opened and update the printed messages accordingly.
v2: Attribute for the flag rename, call drmGetDevices2 w/o the flag.
v3: Keep drmParsePciDeviceInfo() hunk in previous patch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Relative to the original version, here one can provide a flags bitmask.
Currently only DRM_DEVICE_IGNORE_PCI_REVISION is supported.
Implementation detail:
If it's set, we will only parse the separate sysfs files and we won't
touch the config one. The latter awakes the device (causing delays)
which is the core reason why this API was introduced.
v2:
- Initialize revision to 0xff if it's unread.
- Change DRM_DEVICE_IGNORE_PCI_REVISION to DRM_DEVICE_GET_PCI_REVISION
- Add explicit note that drmGetDevice[s]2 does not retrieve the
revision by default.
v3:
- Correctly fold drmParsePciDeviceInfo() hunk in this patch.
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Nicolai Hähnle <nhaehnle@gmail.com>
Cc: Mauro Santos <registo.mailling@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98502
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Up-to recently (patch should land in 4.10) the kernel did not expose the
PCI device revision field as a separate sysfs file.
Thus one needed too parse the config file to retrieve it. This in
itself wakes up the device, which in some cases can be quite slow.
To avoid that, just check for the separate files and fall-back to the
original if kernel is not new enough.
v3: rework alongside drmGetDevice[s]2
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Nicolai Hähnle <nhaehnle@gmail.com>
Cc: Mauro Santos <registo.mailling@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98502
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Will be used with the drmGetDevice[s]2 API.
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Nicolai Hähnle <nhaehnle@gmail.com>
Cc: Mauro Santos <registo.mailling@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98502
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Be consistent with drmParsePciBusInfo() and use solely the device
major/minor pair.
Cc: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
a5xx and later are 64bit devices.. make reloc's handle that. A new
public symbol is introduced to avoid silent problems with new mesa and
old libdrm (since on 64b reloc consumes two dwords).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to pass through a timeout parameter to implement
pipe->fence_finish() properly. The new fxn accepts a timeout
in nanoseconds. Simplify etna_pipe_wait(..) by using
etna_pipe_wait_ns(..).
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Just some trivial boring typo fixes all over the tree.
READMEs and comments only.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
There is no need to maintain the value in the shadowed variable from
what I can see.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The original version considered only card devices, while this will pick
the device/node name regardless - card, control, renderD, other...
Current implementation is "linux" specific, in such that it relies on
sysfs/uevent file. At the same time this gives us the flexibility to
support any nodes even future ones, as long as they're within DRM_MAJOR.
Shamelessly copied from mesa, latter by: Gary Wong <gtw@gnu.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Having the "Entering|Leaving directory X" messages it not required nor
useful in vast majority of the cases.
One can always have them printed by `make -w' or by overriding the
AM_MAKEFLAGS variable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Exposing the u32 context ID makes it possible to define new drm kernel
interfaces based on the same IDs that e.g. execbuf uses to identify a
gem context, that aren't themselves abstracted by libdrm but need to be
used by libdrm/drm_intel_context based clients such as (parts of) i-g-t
or Mesa.
For example this can be used to configure an i915-perf stream to collect
metrics for a specific context.
v2: s/drm_intel_gem_context_get_context_id/drm_intel_gem_context_get_id/
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Like etna_device_new() but creates it's own private dup() of the fd
which is close()d when the device is finalized.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
Some platforms (such as Macs using OF) can have more information in the
uevent file thus reading only the first 128 might not be sufficient.
Bump it to 512, which "should be enough for everybody" ;-)
v2: Use sizeof(data)-1 over hardcoded number (Eric).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98629
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Mingcong Bai <jeffbai@aosc.xyz>
Tested-by: Mingcong Bai <jeffbai@aosc.xyz> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Since we're trying to standardise and make things more consistent in
the area, add a basic README which covers some of the more popular
topics.
v2:
- Drop drm-misc (Daniel Vetter)
v3:
- Elaborate on when and which headers to update
- Add a list of headers and the respective "issues"
- Add file to EXTRA_DIST
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
As well as allowing a hexadecimal PCI ID number, the
INTEL_DEVID_OVERRIDE environment variable can now contain one of a few
short codenames. The codenames are stored in a small table to map them
to a corresponding PCI ID. This makes it easier to use without having
to look up the PCI IDs manually.
The PCI IDs used are the same as those chosen for the -p option of
run.c in shader-db but SKL has been added as well.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This function is used to look up the marking name
for a specific board.
v2: agd: Squash in subsequent updates to the table.
v3: [Michel Dänzer]
* Make amdgpu_asic_id_table static, so it's not exported from
libdrm_amdgpu.so.1
* Add amdgpu_get_marketing_name to amdgpu-symbols-check
* Fix indentation of second line of if statement
* Squash in another change removing redundant entries
* Change spelling of "RADEON" -> "Radeon"
* Remove "(TM)" from a minority of entries
v4: [Michel Dänzer]
* Use const char* instead of fixed size array for marketing_name (Emil
Velikov)
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Flora Cui <Flora.Cui@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Rather than cut/pasting these couple ioctl wrappers everywhere, just
stuff them as static-inline into a header.
This is probably mostly used from mesa, but some drivers, test apps, etc
may also want to use it from libdrm.
v2: handle EINTR, add sync_accumulate() based on #dri-devel discussion,
etc
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Thierry Reding
Jonathan Gray
Ville Syrjälä
Seung-Woo Kim
Emil Velikov
Grazvydas Ignotas
Emil Velikov
Robert Bragg
Eric Anholt
Rob Clark
Christian Gmeiner
Michel Dänzer
Robert Bragg
Ben Widawsky
Matt Turner
Neil Roberts
Junwei Zhang
Alex Deucher