Don't assume that a plane supports any kind of pixelformat
but do a check first.
v2: Simplify the format check.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This enables us to check for overlay planes which are located
'below' the primary plane.
Since the alpha value only has an effect when creating surfaces
with an alpha-pixelformat this doesn't affect the regular
XRGB8888 primary surface.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
The current order (rbg) seems wrong.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Currently we are missing the bo_destroy() when modetest terminates.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Currently we don't destroy buffer and remove framebuffer for
planes when closing modetest.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message. fb_id = 0 is unused]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Remove the framebuffer and destroy the bo when error occurs on set_mode
and test_page_flip.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We should remove the framebuffer before destroying the buffer.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message. fb_id = 0 is unused]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
If use -P option without -s option, the program segfaults due to
dev.mode.bo being NULL.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Only the 'offsets' array was initialized to zero.
Since bo_create only sets the handles which are
necessary, were we passing garbage data to the
kernel when calling drmModeAddFB2 later.
The issue only seems to appear when passing e.g.
NV12 data to the kernel, a case where not only
handles[0] is used. I therefore also removed the
corresponding comment.
v2: Do the same for set_mode(), set_cursors()
and test_page_flip().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
A couple of files use ffs() without explicitly including strings.h.
Some systems will pull in ffs()'s declaration through another header
anyway, but not when compiling against bionic in AOSP master.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
There is a rockchip drm kms driver.
Add "rockchip" to the static lists of driver names in the the standard
set of tests.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
[Emil Velikov: Resolve trivial conflicts.]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since imx-drm has graduated from staging it seems to be a good idea to
recognize it by default in the libdrm tests.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The modetest application uses libkms to allocate dumb buffers, leading
to overallocation due to the hardcoded 32 bpp value. This can even cause
failures in drivers when the resulting pitch is too large for the
hardware to handle and gets rejected by the driver when creating the
frame buffer.
Fix this by computing the required bpp value and allocating dumb buffers
directly without going through libkms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the libdrm_tegra helper library to encapsulate Tegra-specific
interfaces to the DRM.
Furthermore, Tegra is added to the list of supported chips in the
modetest and vbltest programs.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This fixes an issue when trying to use -v and -C together. When trying
to read the page flip event, we are interrupted by the SIGALRM that
comes in, and so we think we timed out when we simply got EINTR. While
we could just loop checking for EINTR, SIGALRM is just bad idea to
begin with, so just rewrite it to use a thread.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Autotools is already smart enough to pick the *.pc.in files but it
needs some help with the Android.mk ones.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
v2: include modetest rather than modeset.
Spotted by Mauro Rossi and Paulo Sergio.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> (v1)
When mode is selected we only give the name of the mode as parameter.
But sometime, two different modes have the same name but not
the same vrefresh frequency.
This patch give the possibility to select a mode by its name
and optionally by its refresh frequency.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This is helpful for differentiating between multiple devices that use
the same module.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The compiler is unaware of that we have at least one crts/connector/plane
thus it complains that some of our variables will be used uninitialised.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to
make room for the chroma plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The line stride passed to the function is expressed in bytes, there's no
need to multiply it by 2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When building the pipeline, instead of using only the encoders attached
to a connector, take all possible encoders into account to locate a
CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The -s argument can now take a list of connectors. Configure all of them
in cloned mode using a single CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for handling multiple connectors in a single
pipeline in a cloned configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There's not reason to require setting a mode to test planes. Split the
two operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Planes are associated with CRTCs, not connectors. Don't try to be too
clever, use the CRTC ID in the -P option. This prepares for splitting
CRTC and planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of passing the device fd and resources as global variables group
them in a device structure and pass it explictly to all functions that
need it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Boris BREZILLON
Tobias Jakobi
Emil Velikov
Rob Clark
Joonyoung Shim
Greg Hackmann
Chih-Wei Huang
Daniel Kurtz
Philipp Zabel
Laurent Pinchart
Thierry Reding
Ville Syrjälä
Jasper St. Pierre
Benjamin Gaignard
Vincent ABRIOU
Ilia Mirkin