Add support for creating buffers using big-endian formats.
For now this is limited to XRGB1555 and RGB565, which are the most
common big-endian formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- No changes,
v2:
- New.
Add support for rendering the crosshairs in a buffer using the
big-endian RGB565 format.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- No changes,
v2:
- New.
Cairo always uses native byte order for rendering.
Hence if the byte order of the frame buffer differs from the byte order
of the CPU, the frame buffer contents need to be byteswapped twice: once
before rendering, to convert to native byte order, and a second time
after rendering, to restore the frame buffer format's byte order.
Note that byte swapping is not done for ARGB32 formats, as for these
formats, byte order only affects the order of the red, green, and blue
channels, which we do not care about here.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Wrap byteswap_buffer{16,32}() implementation inside #if HAVE_CAIRO
to avoid defined-but-not-used compiler warnings,
v2:
- RGB30 is untested.
Add support for drawing the SMPTE and tiles test patterns in buffers
using big-endian formats.
For now this is limited to XRGB1555 and RGB565, which are the most
common big-endian formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Increase indentation after definition of cpu_to_be16(),
v2:
- New.
When specifying a frame buffer format like "RG16_BE" (big-endian RG16),
modetest still uses the little-endian variant, as the format string is
truncated to four characters.
Fix this by increasing the format string size to 8 bytes (7 characters +
NUL terminator).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Update for suffix change from "be" to "_BE", cfr. commit
ffb9375a50 ("xf86drm: handle DRM_FORMAT_BIG_ENDIAN in
drmGetFormatName()"),
- Replace hardcoded numbers in code by sizeof(),
v2:
- New.
DRM formats are defined to be little-endian, unless the
DRM_FORMAT_BIG_ENDIAN flag is set. Hence writes of multi-byte pixel
values need to take endianness into account.
Introduce a swap16() helper to byteswap 16-bit values, and a
cpu_to_le16() helper to convert 16-bit values from CPU-endian to
little-endian, and use the latter in the various pattern fill functions
for 16-bit formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Increase indentation after definition of cpu_to_le16(),
v2:
- New.
DRM formats are defined to be little-endian, unless the
DRM_FORMAT_BIG_ENDIAN flag is set. Hence writes of multi-byte pixel
values need to take endianness into account.
Introduce a swap32() helper to byteswap 32-bit values, and a
cpu_to_le32() helper to convert 32-bit values from CPU-endian to
little-endian, and use the latter in the various pattern fill functions
for 32-bit formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- Use new HAVE_BIG_ENDIAN symbol,
v3:
- Increase indentation after definition of cpu_to_le32(),
v2:
- Add Acked-by,
- Add swap32() intermediate helper,
- Add __ARM_BIG_ENDIAN and __s390__.
Add smpte and tiles pattern for 10-bit NV15, NV20 and NV30 pixel formats
based on the existing pattern for NV12 with colors simply scaled from
8-bit to 10-bit.
These pixel formats are typically used by video decoder and display
pipeline on Rockchip SoCs, e.g. on RK322X, RK3288, RK3328 and RK3399
the video decoder produce 10-bit video frames in NV15 and NV20 format.
NV20 and NV30 pixel formats was added in drm-misc commit 728c15b4b5f3
("drm/fourcc: Add NV20 and NV30 YUV formats").
This can be tested/validated on Rockchip SoCs with drm-misc commit
d4b384228562 ("drm/rockchip: vop: Add NV15, NV20 and NV30 support").
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for drawing the SMPTE pattern in buffers using a
color-indexed frame buffer formats with two, four, or sixteen colors.
Note that this still uses 256 as the CLUT size, as
DRM_IOCTL_MODE_SETGAMMA enforces that the size matches against the
(fixed) gamma size, while the CLUT size depends on the format.
Move clearing the color LUT entries from util_smpte_index_gamma() to its
caller, as only the caller knows how many entries there really are
(currently DRM always assumes 256 entries).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- Add missing C[12] to oneline-summary,
- Do not remove memset() of full lut, else some entries may stay
uninitialized,
v3:
- Add Acked-by,
v2:
- Split off changes to tests/modetest/modetest.c,
- Add C1 and C2 support.
The linuxdoc comments say userspace can query the gamma size:
* drm_mode_gamma_set_ioctl - set the gamma table
*
* Set the gamma table of a CRTC to the one passed in by the user. Userspace can
* inquire the required gamma table size through drm_mode_gamma_get_ioctl.
* drm_mode_gamma_get_ioctl - get the gamma table
*
* Copy the current gamma table into the storage provided. This also provides
* the gamma table size the driver expects, which can be used to size the
* allocated storage.
but the code doesn't seem to support that in an easy way (like setting
red/green/blue to NULL on input, retrieving gamma_size on output), only
by providing big enough buffers for red/green/blue, and looping over
gamma_size until -EINVAL is no longer returned.
Add support for creating buffers using the new color-indexed frame
buffer formats with two, four, and sixteen colors.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Add Acked-by,
v2:
- Split off changes to tests/modetest/buffers.c.
Add support for drawing the SMPTE pattern in a buffer using the C2
indexed format.
As only four colors are available, resolution is halved, and the pattern
is drawn in a PenTile RG-GB matrix, using Floyd-Steinberg dithering.
The magnitude of the green subpixels is reduced, as there are twice as
many green subpixels as red or blue subpixels.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Dithering example at https://drive.google.com/file/d/1g5O8XeacrjrC8rgaVENvR65YeI6QvmtO/view
v5:
- Add Reviewed-by,
v4:
- Replace FILL_COLOR() use by pentile_color_lut[],
v3:
- Add Acked-by,
v2:
- New.
Add support for drawing the SMPTE pattern in a buffer using the C1
indexed format.
As only two colors are available, the pattern is drawn in black and
white, using Floyd-Steinberg dithering[1].
[1] https://en.wikipedia.org/wiki/Floyd%E2%80%93Steinberg_dithering
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Dithering example at https://drive.google.com/file/d/1waJczErrIaEKRhBCCU1ynxRG8agpo0Xx/view
v5:
- Add Reviewed-by,
v4:
- Replace FILL_COLOR() use by bw_color_lut[],
v3:
- Add Acked-by,
- Add Wikipedia link,
v2:
New.
Add support for drawing the SMPTE pattern in a buffer using the C4
indexed format.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Add Acked-by,
v2:
- Use new smpte_top[],
- Split off changes to tests/util/pattern.c.
Store the number of available colors for color-indexed frame
buffer formats in the format_info[] array. This avoids the need of test
code for having to use switch statements all the time to obtain the
number of colors, or to check if a mode is color-indexed or not.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Add Acked-by,
v2:
- New.
Add support for creating buffers using the new color-indexed frame
buffer formats with two, four, and sixteen colors.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Add Acked-by,
v2:
- Split off changes to tests/util/format.c.
The color LUT for the SMPTE pattern in indexed mode contains 22 entries,
although only 13 are non-unique.
Reduce the size of the color LUT by dropping duplicate entries, so it
can be reused for formats supporting e.g. 16 colors. Rename the
function util_smpte_c8_gamma() to util_smpte_fill_lut(), and its first
parameter size to ncolors, to match their actual use.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- Rename util_smpte_index_gamma() to util_smpte_fill_lut(), and its
first parameter from size to ncolors,
- Move smpte_color_lut[] down,
- Kill FILL_COLOR() macro,
- Add and use EXPAND_COLOR() macro,
v3:
- Add Acked-by,
v2:
- Factor out smpte color LUT.
Fill in the LSB when converting color components from 8-bit to 16-bit.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
v5:
- Add Reviewed-by,
v4:
- No changes,
v3:
- Add Acked-by,
v2:
- New.
Print modifiers in hex in addtion to in strings returned by
drmGetFormatModifierName. In some cases, hex numbers can be more easily
compared visually.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Currently the atomic request is only assigned after `set_property()` is
called, leaving `dev.req` in its uninitialized state causing
`drmModeAtomicAddProperty()` to return an error code, which is printed
as `"Success"` because `errno` is not set by `libdrm` (but it would have
been when non-atomic `drmModeObjectSetProperty()` called an IOCTL
immediately):
sony-akatsuki-row ~ $ modetest -M msm -a -w 81:ACTIVE:0
failed to set CRTC 81 property ACTIVE to 0: Success
Solve this by assigning a new atomic request object before calling
`set_property()`, when there are properties to set. Likewise, commit
these properties after `set_property()` even if there is no other
operation (setting modes or planes) specified.
Furthermore `drmModeObjectSetProperty()` is implemented in terms of
`DRM_IOCTL()` which already returns `-errno` when `ioctl()` returns
`-1`, so we should instead pass `ret` to `strerror()` and get an
accurate error string out of `drmModeAtomicAddProperty()` too.
Fixes: 93220283 ("tests/modetest: Add atomic support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Let's permit testing vsync with the default mode, this returns
back the pipe content and count when calling set_mode() so the
vsync test can also be used.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
As found and discussed in [MR 58] a blob is not created in the else arm
because adding the GAMMA_LUT property with a NULL/0 blob_id causes it
to be reset to a default linear / pass-thru gamma table. The values
in the gamma_lut table might still be consumed in the legacy API path
below though, so it has to be initialized to a linear table.
[MR 58]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/58#note_466972
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Let's follow the Rule of Silence. And while here,
document what's going on.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
It is useful to be able to specify mode parameters manually. Add support
for setting user-supplied modes. This patch is based on the original
idea by Rohit and Jessica, but implemented from scratch.
Suggested-by: Rohith Iyer <quic_rohiiyer@quicinc.com>
Suggested-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
These are unused since commit edcef53685 ("modetest: Add test
pattern support for missing RGB formats").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
- Add Reviewed-by.
mode_vrefresh() does not take into account interlaced, doublescan, and
multiscan modes, leading to incorrect refresh rates.
Fix this, based on drm_mode_vrefresh() in Linux.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The YUV SMPTE patterns use RGB 191/192/192 instead of 192/192/192 for
the grey color in the top color bar.
Change it to 192/192/192, to match the RGB SMPTE patterns.
Fixes: a94ee62429 ("modetest: Add SMPTE test pattern")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
- Add Reviewed-by.
Add support for drawing the SMPTE and tiles patterns in buffers using
semi-planar YUV formats with non-subsampled chroma planes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
v2:
- Add Reviewed-by.
Add writeback support to modetest with the below options:
- Passing in -a -c will now also show the writeback connector
- Dump the writeback output buffer to bitstream
Usage: "./modetest -M msm -s <connector_id>:<widthxheight>
-a -o <filepath>
-P <plane_id>@<crtc_id>:<widthxheight>+0+0@RG24"
This currently supports single writeback connector.
Co-developed-by: Rohith Iyer <quic_rohiiyer@quicinc.com>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
[DB: dropped custom mode support, fixed segfault]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On 32-bit:
../tests/amdgpu/amdgpu_stress.c: In function ‘alloc_bo’:
../tests/amdgpu/amdgpu_stress.c:178:49: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stdout, "Allocated BO number %u at 0x%lx, domain 0x%x, size %lu\n",
~~^
%llx
num_buffers++, addr, domain, size);
~~~~
../tests/amdgpu/amdgpu_stress.c:178:72: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 6 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stdout, "Allocated BO number %u at 0x%lx, domain 0x%x, size %lu\n",
~~^
%llu
num_buffers++, addr, domain, size);
~~~~
../tests/amdgpu/amdgpu_stress.c: In function ‘submit_ib’:
../tests/amdgpu/amdgpu_stress.c:276:54: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stdout, "Submitted %u IBs to copy from %u(%lx) to %u(%lx) %lu bytes took %lu usec\n",
~~^
%llx
count, from, virtual[from], to, virtual[to], copied, delta / 1000);
~~~~~~~~~~~~~
../tests/amdgpu/amdgpu_stress.c:276:65: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stdout, "Submitted %u IBs to copy from %u(%lx) to %u(%lx) %lu bytes took %lu usec\n",
~~^
%llx
count, from, virtual[from], to, virtual[to], copied, delta / 1000);
~~~~~~~~~~~
../tests/amdgpu/amdgpu_stress.c:276:70: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 8 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stdout, "Submitted %u IBs to copy from %u(%lx) to %u(%lx) %lu bytes took %lu usec\n",
~~^
%llu
count, from, virtual[from], to, virtual[to], copied, delta / 1000);
~~~~~~
../tests/amdgpu/amdgpu_stress.c:276:85: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 9 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stdout, "Submitted %u IBs to copy from %u(%lx) to %u(%lx) %lu bytes took %lu usec\n",
~~^
%llu
count, from, virtual[from], to, virtual[to], copied, delta / 1000);
~~~~~~~~~~~~
../tests/amdgpu/amdgpu_stress.c: In function ‘parse_size’:
../tests/amdgpu/amdgpu_stress.c:296:24: warning: format ‘%li’ expects argument of type ‘long int *’, but argument 3 has type ‘uint64_t *’ {aka ‘long long unsigned int *’} [-Wformat=]
if (sscanf(optarg, "%li%1[kmgKMG]", &size, ext) < 1) {
~~^ ~~~~~
%lli
../tests/amdgpu/amdgpu_stress.c: In function ‘main’:
../tests/amdgpu/amdgpu_stress.c:378:45: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Wformat=]
fprintf(stderr, "Buffer size to small %lu\n", size);
~~^ ~~~~
%llu
Fix this by using the proper "PRI?64" format specifiers.
Fixes: d77ccdf3ba ("amdgpu: add amdgpu_stress utility v2")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
---
On Linux/amd64, the format strings in the resulting binary are
unchanged.
v3:
- Add Reviewed-by,
v2:
- Use PRI?64 to unbreak 64-bit build.
issue:
in vcn1-vcn3, session buffer was not truly added, it shows
decoding creation commands cannot be sent multiple times.
problem:
session buffer has to be the first buffer sending out.
Otherwise, system could assume session buffer doesn't
exist.
solution:
move session buffer sending sequence to be the first one.
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
update decoder unit test with session context buffer for VCN v1 to v4
v2: remove multiple checks for vcn4 (Ruijing Dong)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
1. fixed an issue that drm test vcn3/4 encoding test
could cause VCN engine stuck.
2. adding missing or errous encoding ib package members.
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
It is input buffer instead of vbv_buffer.
Correct its name.
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Add the command line argument -e s[.t] to exclude (disable) suite s, or to
exclude suite s test t.
This is useful for instance to run the Basic Suite, but disable the GPU reset
test, on the command line, like this:
amdgpu_tests -s 1 -e 1.13
This option can be specified more than once on the command line, in order to
exclude more than one suite and/or suite and test combination from being run.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Add -s and -t to the help output, as well as sort
the options output alphabetically.
v1: Fix a spelling in the subject of this commit.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Fix the Usage: string on -h (help) in amdgpu_tests.c,
so brackets match, and remove mismatched angle brackets.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
For apu, it is integrated with cpu.
So hotplug test should be unnecessary for it.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Add an entry for the "vkms" driver, so that the test utilities work with
the vkms driver without passing the -M argument.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Yi Xie <yixie@google.com>
Enable decode unit test for jpeg4.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
This makes the test utilities work with the i.MX LCDIFv3 driver
without the necessity of using the -M argument.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Neil Armstrong
Geert Uytterhoeven
Jonas Karlman
Chia-I Wu
Marijn Suijten
Ezequiel Garcia
Dmitry Baryshkov
Geert Uytterhoeven
Rohith Iyer
Ruijing Dong
Saleemkhan Jamadar
Luben Tuikov
jie zhang
Yi Xie
Lang Yu
Simon Ser
Marco Felsch