This is the correct fix for the RS690 and hopefully the dma coherent work.
For now we limit everybody to a 32-bit DMA mask but it is possible for
RS690 to use a 40-bit DMA mask for the GART table itself,
and the PCIE cards can use 40-bits for the table entries.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The i915_vblank_swap() function schedules an automatic buffer swap
upon receipt of the vertical sync interrupt. Such an operation is
lengthy so it can't be allowed to happen in normal interrupt context,
thus the DRM implements this by scheduling the work in a kernel
softirq-scheduled tasklet. In order for the buffer swap to work
safely, the DRM's central lock must be taken, via a call to
drm_lock_take() located in drivers/char/drm/drm_irq.c within the
function drm_locked_tasklet_func(). The lock-taking logic uses a
non-interrupt-blocking spinlock to implement the manipulations needed
to take the lock. This semantic would be safe if all attempts to use
the spinlock only happen from process context. However this buffer
swap happens from softirq context which is really a form of interrupt
context. Thus we have an unsafe situation, in that
drm_locked_tasklet_func() can block on a spinlock already taken by a
thread in process context which will never get scheduled again because
of the blocked softirq tasklet. This wedges the kernel hard.
To trigger this bug, run a dual-head cloned mode configuration which
uses the i915 drm, then execute an opengl application which
synchronizes buffer swaps against the vertical sync interrupt. In my
testing, a lockup always results after running anywhere from 5 minutes
to an hour and a half. I believe dual-head is needed to really
trigger the problem because then the vertical sync interrupt handling
is no longer predictable (due to being interrupt-sourced from two
different heads running at different speeds). This raises the
probability of the tasklet trying to run while the userspace DRI is
doing things to the GPU (and manipulating the DRM lock).
The fix is to change the relevant spinlock semantics to be the
interrupt-blocking form. After this change I am no longer able to
trigger the lockup; the longest test run so far was 20 hours (test
stopped after that point).
Note: I have examined the places where this spinlock is being
employed; all are reasonably short bounded sequences and should be
suitable for interrupts being blocked without impacting overall kernel
interrupt response latency.
Signed-off-by: Mike Isely <isely@pobox.com>
Conflicts:
linux-core/drm_compat.c
linux-core/drm_compat.h
linux-core/drm_ttm.c
shared-core/i915_dma.c
Bump driver minor to 13 due to introduction of new
relocation type.
This patch fixes bits of the DRM so to make the radeon DRI work on
non-cache coherent PCI DMA variants of the PowerPC processors.
It moves the few places that needs change to wrappers to that
other architectures with similar issues can easily add their
own changes to those wrappers, at least until we have more useful
generic kernel API.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
PCI- or high memory.
This is substantially more efficient than drm_bo_kmap,
since the mapping only lives on a single processor.
Unmapping is done use kunmap_atomic(). Flushes only a single tlb() entry.
Add a support utility int drm_bo_pfn_prot() that returns the
pfn and desired page protection for a given bo offset.
This is all intended for relocations in bound TTMS or vram.
Mapping-accessing-unmapping must be atomic, either using preempt_xx() macros
or a spinlock.
PCI- or high memory.
This is substantially more efficient than drm_bo_kmap,
since the mapping only lives on a single processor.
Unmapping is done use kunmap_atomic(). Flushes only a single tlb() entry.
Add a support utility int drm_bo_pfn_prot() that returns the
pfn and desired page protection for a given bo offset.
This is all intended for relocations in bound TTMS or vram.
Mapping-accessing-unmapping must be atomic, either using preempt_xx() macros
or a spinlock.
This fixes at least two problems:
* The vblank_disable_fn timer callback could get called after the DRM was
de-initialized, e.g. on X server shutdown.
* Leak of vblank related resources when disabling and re-enabling the IRQ, e.g.
on an X server reset.
On many chipsets, the checks for DPLL enable or VGA mode will prevent the
pipeconf regs from being restored, which could result in a blank display or X
failing to come back after resume. So restore them unconditionally along with
actually restoring pipe B's palette correctly.
On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time. So save/restore them properly.
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
sequence number may actually turn up before the corresponding fence
object has been queued on the ring.
Fence drivers can use this member to determine whether a
sequence number must be re-reported.
In hibernate, we may end up calling the VGA save regs function twice, so we
need to make sure it's idempotent. That means leaving ARX in index mode after
the first save operation. Fixes hibernate on 965.
Thomas Hellström
Ben Skeggs
Thomas Hellstrom
Dave Airlie
Dave Airlie
Alan Hourihane
Mike Isely
Dave Airlie
Benjamin Herrenschmidt
Xiang, Haihao
Eric Anholt
Patrice Mandin
Jesse Barnes
Kristian Høgsberg
Michel Dänzer
Keith Packard
Jesse Barnes
Jesse Barnes