Add function to derive floating value of vertical
refresh rate from drm mode using pixel clock,
horizontal total size and vertical total size.
Use this function to find suitable mode having vrefresh
value which is matching with user provided vrefresh value.
If user doesn't provide any vrefresh value in args then
update vertical refresh rate value in pipe args using this
function.
Also use this function for printing floating vrefresh while
dumping all available modes.
This will give more accurate picture to user for available modes
differentiated by floating vertical refresh rate and help user
select more appropriate mode using suitable refresh rate value.
V4:
1) While setting mode, print mode name and vrefresh using struct
drmModeModeInfo instead of struct pipe_args.
2) Revert back to using a float value instead of float *
for vrefresh arg in connector_find_mode().
V3:
1) Change name of function used to derive refresh rate.
V2:
1) Don't use inline function for deriving refresh rate from mode.
2) If requested mode not found, print refresh rate only
if user had provided it in args.
Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
For the scenario where user may require to modeset with a mode
supporting a fractional value for vertical refresh-rate,
appropriate mode can be selected by searching for mode
having matching fractional vertical refresh rate using
below equation.
vrefresh = (1000 * pixel clock) / (htotal * vtotal) Hz.
We do this way since driver doesn't return float value of vrefresh
as it use int for vrefresh in struct drm_mode_info, but we can derive
the actual value using pixel clock, horizontal total size and
vertical total size values.
So for e.g. if user want to select mode having 59.94 Hz as refresh rate
then with this patch it be can done as shown in below command,
given there is an appropriate mode is available :
modetest -M xlnx -s 39:1920x1080-59.94@BG24 -v
NOTE: Above command was tested on xilinx DRM driver with DP
monitor which was supporting mode having 59.94 Hz refresh rate.
V2: Update commit message
V3: Update with below changes as per review comments :
1) Use epsilon for vrefresh comparison
2) Use implicit type-casting wherever possible
V4: Keep patch version history on main commit message
Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Instead of hacking the binary every time, we can now specify directly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This includes logic to configure the LUT accordingly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
As new features are added and others are declared to be legacy, it's
nice to be able to implement fallbacks. As such, create a
property-setting variant that does not generate errors which can very
well be entirely expected.
Will be used for gamma control in a future change.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If "-a" option is set this make modetest use atomic API instead
of legacy API.
Test the frame rate ("-v") it does a loop and swap between two
framebuffer for each active planes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This will prevent any more missing `#include "config.h"` bug, at the
cost of having to recompile some files that didn't need to be when
changing build options.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The existing format modifier definitions were merged prematurely, and
recent work has unveiled that the definitions are suboptimal in several
ways:
- The format specifiers, except for one, are not Tegra specific, but
the names don't reflect that.
- The number space is split into two, reserving 32 bits for some
"parameter" which most of the modifiers are not going to have.
- Symbolic names for the modifiers are not using the standard
DRM_FORMAT_MOD_* prefix, which makes them awkward to use.
- The vendor prefix NV is somewhat ambiguous.
Fortunately, nobody's started using these modifiers, so we can still fix
the above issues. Do so by using the standard prefix. Also, remove TEGRA
from the name of those modifiers that exist on NVIDIA GPUs as well. In
case of the block linear modifiers, make the "parameter" smaller (4
bits, though only 6 values are valid) and don't let that leak into any
of the other modifiers.
Finally, also use the more canonical NVIDIA instead of the ambiguous NV
prefix.
This is based on commit 5843f4e02fbe86a59981e35adc6cabebee46fdc0 from
Linux v4.16-rc1 and also updates modetest to use the new defines.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is warning about ignoring return value of 'asprintf'. Fix to
check return value of asprintf().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Allow the user to override the default configuration set by setcrtc
for the primary plane. On some hardware primary planes can be freely
positioned/sized, and it'd be nice if we can actually test that feature.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This teaches modetest about the new IN_FORMATS blob and decodes the
blob to show supported formats and modifiers.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
fourcc is not a string, it's a packed integer. This happens to work out
on LE, but gets reversed on BE.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This can be useful for debugging. xrandr prints it, so why not.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Used in compliance with POSIX 2001/2008
Fixes errors e.g.
error: implicit declaration of function 'select'
and helps with missing definitions of FD_* defines
v2: conditionally include sys/select.h, include in every test where
needed.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
util_open() takes a device parameter, followed by a module parameter.
The existing tests used the drmOpen() function, which uses a different
ordering of the parameters, and the old ordering was accidentally kept
during the conversion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use the new util_open() helper instead of open-coding the method for
finding a usable device.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
These tables are duplicated in several places, so move them into libutil
so that they can be shared.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Some of the helpers, such as the pattern drawing helpers or the format
lookup helpers, have potential to be reused. Move them into a separate
library to make it easier to share them.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Allow connector names to be used in the specification of the -s option.
This requires storing the string passed on the command-line so that it
can later be resolved to a connector ID (after the DRM device has been
opened).
Connector names are constructed from the connector type name and
connector type ID using the same format as used internally in the
Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Don't assume that a plane supports any kind of pixelformat
but do a check first.
v2: Simplify the format check.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Currently we are missing the bo_destroy() when modetest terminates.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Currently we don't destroy buffer and remove framebuffer for
planes when closing modetest.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message. fb_id = 0 is unused]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Remove the framebuffer and destroy the bo when error occurs on set_mode
and test_page_flip.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We should remove the framebuffer before destroying the buffer.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message. fb_id = 0 is unused]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
If use -P option without -s option, the program segfaults due to
dev.mode.bo being NULL.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[Emil Velikov: Tweak the commit message.]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Only the 'offsets' array was initialized to zero.
Since bo_create only sets the handles which are
necessary, were we passing garbage data to the
kernel when calling drmModeAddFB2 later.
The issue only seems to appear when passing e.g.
NV12 data to the kernel, a case where not only
handles[0] is used. I therefore also removed the
corresponding comment.
v2: Do the same for set_mode(), set_cursors()
and test_page_flip().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
A couple of files use ffs() without explicitly including strings.h.
Some systems will pull in ffs()'s declaration through another header
anyway, but not when compiling against bionic in AOSP master.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
There is a rockchip drm kms driver.
Add "rockchip" to the static lists of driver names in the the standard
set of tests.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
[Emil Velikov: Resolve trivial conflicts.]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since imx-drm has graduated from staging it seems to be a good idea to
recognize it by default in the libdrm tests.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The modetest application uses libkms to allocate dumb buffers, leading
to overallocation due to the hardcoded 32 bpp value. This can even cause
failures in drivers when the resulting pitch is too large for the
hardware to handle and gets rejected by the driver when creating the
frame buffer.
Fix this by computing the required bpp value and allocating dumb buffers
directly without going through libkms.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add the libdrm_tegra helper library to encapsulate Tegra-specific
interfaces to the DRM.
Furthermore, Tegra is added to the list of supported chips in the
modetest and vbltest programs.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When mode is selected we only give the name of the mode as parameter.
But sometime, two different modes have the same name but not
the same vrefresh frequency.
This patch give the possibility to select a mode by its name
and optionally by its refresh frequency.
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Devarsh Thakkar
Ilia Mirkin
Fritz Koenig
Benjamin Gaignard
Eric Engestrom
Thierry Reding
Seung-Woo Kim
Ville Syrjälä
Kristian H. Kristensen
Stéphane Marchesin
Gustavo Padovan
Kylie McClain
Khem Raj
Emil Velikov
Hyungwon Hwang
Boris BREZILLON
Tobias Jakobi
Joonyoung Shim
Greg Hackmann
Rob Clark
Daniel Kurtz
Philipp Zabel
Laurent Pinchart
Thierry Reding
Vincent ABRIOU