PCI- or high memory.
This is substantially more efficient than drm_bo_kmap,
since the mapping only lives on a single processor.
Unmapping is done use kunmap_atomic(). Flushes only a single tlb() entry.
Add a support utility int drm_bo_pfn_prot() that returns the
pfn and desired page protection for a given bo offset.
This is all intended for relocations in bound TTMS or vram.
Mapping-accessing-unmapping must be atomic, either using preempt_xx() macros
or a spinlock.
PCI- or high memory.
This is substantially more efficient than drm_bo_kmap,
since the mapping only lives on a single processor.
Unmapping is done use kunmap_atomic(). Flushes only a single tlb() entry.
Add a support utility int drm_bo_pfn_prot() that returns the
pfn and desired page protection for a given bo offset.
This is all intended for relocations in bound TTMS or vram.
Mapping-accessing-unmapping must be atomic, either using preempt_xx() macros
or a spinlock.
This change adds a driver feature that for i915 is controlled by a module
parameter. You now need to do insmod i915.ko modeset=1 to enable it the
modesetting paths.
It also fixes up lots of X paths. I can run my new DDX driver on this code
with and without modesetting enabled
Allow mode to be set with fb_id set to -1, meaning set
the mode with the current fb (if we have one bound).
Allow intelfb to hook back up it's fb if modesetting
clears it (maybe temporary).
Move any crtc->fb related register changes to set_base
in intel_fb.
General intelfb cleanups.
This fixes at least two problems:
* The vblank_disable_fn timer callback could get called after the DRM was
de-initialized, e.g. on X server shutdown.
* Leak of vblank related resources when disabling and re-enabling the IRQ, e.g.
on an X server reset.
On many chipsets, the checks for DPLL enable or VGA mode will prevent the
pipeconf regs from being restored, which could result in a blank display or X
failing to come back after resume. So restore them unconditionally along with
actually restoring pipe B's palette correctly.
On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time. So save/restore them properly.
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
sequence number may actually turn up before the corresponding fence
object has been queued on the ring.
Fence drivers can use this member to determine whether a
sequence number must be re-reported.
In hibernate, we may end up calling the VGA save regs function twice, so we
need to make sure it's idempotent. That means leaving ARX in index mode after
the first save operation. Fixes hibernate on 965.
i915_flush_ttm was unconditionally executing a clflush instruction
to (obviously) flush the cache. Instead, check if the cpu supports
clflush, and if not, fall back to calling wbinvd to flush the entire
cache.
Signed-off-by: Kyle McMartin <kmcmartin@redhat.com>
(1 << bits) is an undefined value when bits == 32.
gcc may generate 1 with this expression
which will lead to an infinite retry loop in
drm_ht_just_insert_please.
Because of the different implement of hash_long,
this issue is more frequenly see on 64 bit system
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
I couldn't figure out what drm_bo_type_dc was for; Dave Airlie finally clued
me in that it was the 'normal' buffer objects with kernel allocated pages
that could be mmapped from the drm device file.
I thought that 'drm_bo_type_device' was a more descriptive name.
I also added a bunch of comments describing the use of the type enum values and
the functions that use them.
Flags pending validation were stored in a misleadingly named field, 'mask'.
As 'mask' is already used to indicate pieces of a flags field which are
changing, it seems better to use a name reflecting the actual purpose of
this field. I chose 'proposed_flags' as they may not actually end up in
'flags', and in an case will be modified when they are moved over.
This affects the API, but not ABI of the user-mode interface.
Previously, dummy_read_page was used only for read-only user allocations; it
filled in pages that were not present in the user address map (presumably,
these were allocated but never written to pages).
This patch allows them to be used for read-only ttms allocated from the
kernel, so that applications can over-allocate buffers without forcing every
page to be allocated.
I'm hoping to use the dummy_read_page for kernel allocated buffers to avoid
allocating extra pages for read-only buffers (like vertex and batch buffers).
This also eliminates the 'write' parameter to drm_ttm_set_user and just
has DRM_TTM_PAGE_WRITE passed into drm_ttm_create.
Aside from changing drm_bind_ttm to drm_ttm_bind, this patch
adds only documentation and fixes the functions inside drm_ttm.c
to all be prefixed with drm_ttm_.
drmBOSetStatus does not bother to set the fence_class parameter.
Fortunately, drm_bo_setstatus_ioctl doesn't end up using it as it
calls drm_bo_handle_validate with use_old_fence_class = 1.
Document parameters and usage for drm_bo_handle_validate. Change parameter
order to match drm_bo_do_validate (fence_class has been moved to after
flags, hint and mask values). Existing users of this function have been
changed, but out-of-tree users must be modified separately.
Add comments about the parameters to drm_bo_do_validate, along
with comments for the DRM_BO_HINT options. Remove the 'do_wait'
parameter as it is duplicated by DRM_BO_HINT_DONT_BLOCK.
Creating a ttm was done with drm_ttm_init while destruction was done with
drm_destroy_ttm. Renaming these to drm_ttm_create and drm_ttm_destroy makes
their use clearer. Passing page_flags to the create function will allow that
to know whether user or kernel pages are needed, with the goal of allowing
kernel ttms to be saved for later reuse.
This fix is actually a bit of a cleanup too--it moves lock freeing to
drm_rmmap_locked and out of drm_lastclose. This makes it symmetrical with
addmap and also prevents the lock from being incorrectly freed from driver
mappings.
This should work on all radeon but there is still many things todo:
- add crtc2
- tmds
- lvds
- add bios data table so we don't need to hardcode dac/crtc infos
- separate clock control to make power saving easier & cleaner
- tiling (warning tiling shouldn't be enable in double scan or interlace)
- surface reg manager (this goes along with tiling)
- suspend/resume hook
- avivo & r500 family support
- atom bios support (for posting card mostly)
- finish superioctl skeleton
- what else ? :)
so really want to get a list of modes per output not the global hammer list.
also we remove the mode ids and let the user pass back the full mode description
need to fix up add/remove mode for user modes now
This allow the user to retrieve a list of properties for an output.
Properties can either be 32-bit values or an enum with an associated name.
Range properties are to be supported.
This API is probably not all correct, I may make properties part of the general
resource get when I think about it some more.
So basically you can create properties and attached them to whatever outputs you want,
so it should be possible to create some generics and just attach them to every output.
Since the drm_mode_card_res structure contains user pointers, we have to use
put_user and copy_to_user to write stuff out. The DRM ioctl wrapper will only
take care of copying the base drm_mode_card_res struct, not the included
arrays.
Thomas Hellstrom
Dave Airlie
Jerome Glisse
Alan Hourihane
Jesse Barnes
Kristian Høgsberg
Michel Dänzer
Keith Packard
Jesse Barnes
Jesse Barnes
Jakob Bornecrantz
Jakob Bornecrantz
Dave Airlie
Kyle McMartin
Zhenyu Wang
Zou Nan hai
Ben Skeggs
Pekka Paalanen
Márton Németh
Xiang, Haihao
Robert Noland
Jeremy Kolb