Multiple the image height by 1.5 for NV12/NV21 and by 2 for NV16/NV61 to
make room for the chroma plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The line stride passed to the function is expressed in bytes, there's no
need to multiply it by 2.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When building the pipeline, instead of using only the encoders attached
to a connector, take all possible encoders into account to locate a
CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The -s argument can now take a list of connectors. Configure all of them
in cloned mode using a single CRTC.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for handling multiple connectors in a single
pipeline in a cloned configuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
There's not reason to require setting a mode to test planes. Split the
two operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Planes are associated with CRTCs, not connectors. Don't try to be too
clever, use the CRTC ID in the -P option. This prepares for splitting
CRTC and planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This prepares the code for the split in separate functions of CRTC and
planes setup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of passing the device fd and resources as global variables group
them in a device structure and pass it explictly to all functions that
need it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
As modetest automatically selects an unused plan, providing the plane ID
allows modifying plane properties for the selected planes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Extend the -P option to allow specifying the plane x and y offsets. The
position is optional, if not specified the plane will be positioned at
the center of the screen as before.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The -w parameter can be used to set a property value from the command
line, using the target object ID and the property name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Configuring mode on more than two connectors or two planes is perfectly
valid. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Instead of retrieving resources as they are needed, retrieve them all
(except property blobs) in one go at startup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the -d parameter is specified, modetest will drop master permissions
after setting the mode.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
If the -M parameter is specified, modetest will use the requested device
name instead of trying its builtin list of device names.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The current mostly random sort order hinders code readability. Sort the
options alphabetically in the code, and by group in the help message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Those variables are declared in unistd.h, there's no need to redeclare
them here.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Enable all standard automake warnings except for -Wpointer-arith (as the
test pattern generation code uses void pointer arithmetics) and fix
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Render the crosshairs for 565 and x888/a888 formats.
v2: Use the drm format to determine cairo format
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
YUV420 support is trivial to add since the code already supports
YVU420.
But it looks like the YVU420 support is a bit broken. The chroma
planes are passed in the wrong order to the fill functions, so
fix that while were at it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The fourcc is inside the format_info structure, so if we want to use
it inside the various fill_tiles functions, we need to pass down the
whole format_info, not just the rgb/yuv infos.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Spelling out eDP or DP make for a ridicilously long string which plays
havoc with formatting. Just say eDP or DP.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
libkms only has the xrgb8888 format, so we're overallocating the bo by
quite a lot in some cases. But we still need to get the pitch from the
libkms since it's the driver that decides how to align it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Install test programs is useful in cross compilation case. By default
the behavior is the same and test programs aren't installed in $bindir.
If --enable-install-test-programs is set then test programs are
installed in $bindir.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We don't want to build libdrm tests with Cairo support under Poky, since
they're never used and also cause a build loop from libdrm -> cairo ->
mesa-dri -> libdrm.
To avoid variance in build results, introduce a --disable-cairo-tests
switch.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If color format for CRTC layer is not specified on commandline, then
c->fourcc is unintialized resulting in addfb call failing.
Signed-off-by: Rob Clark <rob@ti.com>
As the modeset test application is often referred to as an example of
the KMS API usage, move test pattern generation and buffer allocation to
a separate file to keep it simple and clear.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This will make it easier to add additional parameters to the connector
and plane arguments.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement tiles and SMPTE test pattern generation for the RGB565,
BGR888, RGB888, ARGB8888, BGRA8888 and BGRX8888 formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement tiles and SMPTE test pattern generation for the NV12, NV21,
NV16 and NV61 formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Implement tiles and SMPTE test pattern generation for the UYVY, VYUY and
YVYU formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Merge the create_test_buffer() and create_grey_buffer() functions into a
single buffer allocation function that takes the pixel format and fill
pattern as parameters.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
this patch adds libdrm_exynos helper layer that inclues some intefaces
for exynos specific gem and virtual display driver and also adds exynos
module name to modtest and vbltest.
Changelog v2:
- fixed exynos broken ioctl.
the pointer of uint64_t *edid should be removed.
- removed unnecessary definitions.
- added drm prime interfaces.
this feature is used to share a buffer between drivers or memory managers
and for this, please, refer to below links:
http://www.mjmwired.net/kernel/Documentation/dma-buf-sharing.txthttp://lwn.net/Articles/488664/
this patch is based on a link below:
git://anongit.freedesktop.org/mesa/drm
commit id: d72a44c7c4
Reviewed-by: Rob Clark <rob@ti.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Rob Clark <rob@ti.com>
In the future we'll have more than just connector properties, so create
a dump_prop function that can handle any property (instead of the
current dump_props function that only handles connector properties).
Also, make this function print a lot more information about the existing
properties.
Also change the printed indentation of the modes to make the output more
readable.
The previous function dump_props also segfaulted when we didn't have
enought permissions. The new function does not segfault in this case (by
checking for the return value of drmModeGetProperty).
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Laurent Pinchart
Rob Clark
Ville Syrjälä
Benjamin Gaignard
Daniel Stone
Tobias Klausmann
Marek Olšák
Rob Clark
Kristian Høgsberg
Paulo Zanoni
Inki Dae