geemili
/
drm
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
drm/linux-core/drm_crtc.h

535 lines
17 KiB
C
Raw Blame History

/*
* Copyright © 2006 Keith Packard
* Copyright © 2007 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*/
#ifndef __DRM_CRTC_H__
#define __DRM_CRTC_H__
#include <linux/i2c.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/idr.h>
#include <linux/fb.h>
struct drm_device;
/*
* Note on terminology: here, for brevity and convenience, we refer to output
* control chips as 'CRTCs'. They can control any type of output, VGA, LVDS,
* DVI, etc. And 'screen' refers to the whole of the visible display, which
* may span multiple monitors (and therefore multiple CRTC and output
* structures).
*/
enum drm_mode_status {
MODE_OK = 0, /* Mode OK */
MODE_HSYNC, /* hsync out of range */
MODE_VSYNC, /* vsync out of range */
MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
MODE_BAD_WIDTH, /* requires an unsupported linepitch */
MODE_NOMODE, /* no mode with a maching name */
MODE_NO_INTERLACE, /* interlaced mode not supported */
MODE_NO_DBLESCAN, /* doublescan mode not supported */
MODE_NO_VSCAN, /* multiscan mode not supported */
MODE_MEM, /* insufficient video memory */
MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
MODE_MEM_VIRT, /* insufficient video memory given virtual size */
MODE_NOCLOCK, /* no fixed clock available */
MODE_CLOCK_HIGH, /* clock required is too high */
MODE_CLOCK_LOW, /* clock required is too low */
MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
MODE_BAD_HVALUE, /* horizontal timing was out of range */
MODE_BAD_VVALUE, /* vertical timing was out of range */
MODE_BAD_VSCAN, /* VScan value out of range */
MODE_HSYNC_NARROW, /* horizontal sync too narrow */
MODE_HSYNC_WIDE, /* horizontal sync too wide */
MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
MODE_HBLANK_WIDE, /* horizontal blanking too wide */
MODE_VSYNC_NARROW, /* vertical sync too narrow */
MODE_VSYNC_WIDE, /* vertical sync too wide */
MODE_VBLANK_NARROW, /* vertical blanking too narrow */
MODE_VBLANK_WIDE, /* vertical blanking too wide */
MODE_PANEL, /* exceeds panel dimensions */
MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
MODE_ONE_WIDTH, /* only one width is supported */
MODE_ONE_HEIGHT, /* only one height is supported */
MODE_ONE_SIZE, /* only one resolution is supported */
MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
MODE_BAD = -2, /* unspecified reason */
MODE_ERROR = -1 /* error condition */
};
#define DRM_MODE_TYPE_BUILTIN (1<<0)
#define DRM_MODE_TYPE_CLOCK_C ((1<<1) | DRM_MODE_TYPE_BUILTIN)
#define DRM_MODE_TYPE_CRTC_C ((1<<2) | DRM_MODE_TYPE_BUILTIN)
#define DRM_MODE_TYPE_PREFERRED (1<<3)
#define DRM_MODE_TYPE_DEFAULT (1<<4)
#define DRM_MODE_TYPE_USERDEF (1<<5)
#define DRM_MODE_TYPE_DRIVER (1<<6)
#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
DRM_MODE_TYPE_CRTC_C)
#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
.name = nm, .status = 0, .type = (t), .clock = (c), \
.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
.vscan = (vs), .flags = (f), .vrefresh = 0
struct drm_display_mode {
/* Header */
struct list_head head;
char name[DRM_DISPLAY_MODE_LEN];
int mode_id;
enum drm_mode_status status;
int type;
/* Proposed mode values */
int clock;
int hdisplay;
int hsync_start;
int hsync_end;
int htotal;
int hskew;
int vdisplay;
int vsync_start;
int vsync_end;
int vtotal;
int vscan;
unsigned int flags;
/* Actual mode we give to hw */
int clock_index;
int synth_clock;
int crtc_hdisplay;
int crtc_hblank_start;
int crtc_hblank_end;
int crtc_hsync_start;
int crtc_hsync_end;
int crtc_htotal;
int crtc_hskew;
int crtc_vdisplay;
int crtc_vblank_start;
int crtc_vblank_end;
int crtc_vsync_start;
int crtc_vsync_end;
int crtc_vtotal;
int crtc_hadjusted;
int crtc_vadjusted;
/* Driver private mode info */
int private_size;
int *private;
int private_flags;
int vrefresh;
float hsync;
};
/* Video mode flags */
#define V_PHSYNC (1<<0)
#define V_NHSYNC (1<<1)
#define V_PVSYNC (1<<2)
#define V_NVSYNC (1<<3)
#define V_INTERLACE (1<<4)
#define V_DBLSCAN (1<<5)
#define V_CSYNC (1<<6)
#define V_PCSYNC (1<<7)
#define V_NCSYNC (1<<8)
#define V_HSKEW (1<<9) /* hskew provided */
#define V_BCAST (1<<10)
#define V_PIXMUX (1<<11)
#define V_DBLCLK (1<<12)
#define V_CLKDIV2 (1<<13)
#define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */
#define DPMSModeOn 0
#define DPMSModeStandby 1
#define DPMSModeSuspend 2
#define DPMSModeOff 3
enum drm_output_status {
output_status_connected,
output_status_disconnected,
output_status_unknown,
};
enum subpixel_order {
SubPixelUnknown = 0,
SubPixelHorizontalRGB,
SubPixelHorizontalBGR,
SubPixelVerticalRGB,
SubPixelVerticalBGR,
SubPixelNone,
};
/*
* Describes a given display (e.g. CRT or flat panel) and its limitations.
*/
struct drm_display_info {
char name[DRM_DISPLAY_INFO_LEN];
/* Input info */
bool serration_vsync;
bool sync_on_green;
bool composite_sync;
bool separate_syncs;
bool blank_to_black;
unsigned char video_level;
bool digital;
/* Physical size */
unsigned int width_mm;
unsigned int height_mm;
/* Display parameters */
unsigned char gamma; /* FIXME: storage format */
bool gtf_supported;
bool standard_color;
enum {
monochrome,
rgb,
other,
unknown,
} display_type;
bool active_off_supported;
bool suspend_supported;
bool standby_supported;
/* Color info FIXME: storage format */
unsigned short redx, redy;
unsigned short greenx, greeny;
unsigned short bluex, bluey;
unsigned short whitex, whitey;
/* Clock limits FIXME: storage format */
unsigned int min_vfreq, max_vfreq;
unsigned int min_hfreq, max_hfreq;
unsigned int pixel_clock;
/* White point indices FIXME: storage format */
unsigned int wpx1, wpy1;
unsigned int wpgamma1;
unsigned int wpx2, wpy2;
unsigned int wpgamma2;
/* Preferred mode (if any) */
struct drm_display_mode *preferred_mode;
char *raw_edid; /* if any */
};
struct drm_framebuffer {
struct drm_device *dev;
struct list_head head;
int id; /* idr assigned */
unsigned int pitch;
unsigned long offset;
unsigned int width;
unsigned int height;
/* depth can be 15 or 16 */
unsigned int depth;
int bits_per_pixel;
int flags;
struct drm_buffer_object *bo;
void *fbdev;
u32 pseudo_palette[17];
void *virtual_base;
struct list_head filp_head;
};
struct drm_crtc;
struct drm_output;
/**
* drm_crtc_funcs - control CRTCs for a given device
* @dpms: control display power levels
* @save: save CRTC state
* @resore: restore CRTC state
* @lock: lock the CRTC
* @unlock: unlock the CRTC
* @shadow_allocate: allocate shadow pixmap
* @shadow_create: create shadow pixmap for rotation support
* @shadow_destroy: free shadow pixmap
* @mode_fixup: fixup proposed mode
* @mode_set: set the desired mode on the CRTC
* @gamma_set: specify color ramp for CRTC
* @cleanup: cleanup driver private state prior to close
*
* The drm_crtc_funcs structure is the central CRTC management structure
* in the DRM. Each CRTC controls one or more outputs (note that the name
* CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
* outputs, not just CRTs).
*
* Each driver is responsible for filling out this structure at startup time,
* in addition to providing other modesetting features, like i2c and DDC
* bus accessors.
*/
struct drm_crtc_funcs {
/*
* Control power levels on the CRTC. If the mode passed in is
* unsupported, the provider must use the next lowest power level.
*/
void (*dpms)(struct drm_crtc *crtc, int mode);
/* JJJ: Are these needed? */
/* Save CRTC state */
void (*save)(struct drm_crtc *crtc); /* suspend? */
/* Restore CRTC state */
void (*restore)(struct drm_crtc *crtc); /* resume? */
bool (*lock)(struct drm_crtc *crtc);
void (*unlock)(struct drm_crtc *crtc);
void (*prepare)(struct drm_crtc *crtc);
void (*commit)(struct drm_crtc *crtc);
/* Provider can fixup or change mode timings before modeset occurs */
bool (*mode_fixup)(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/* Actually set the mode */
void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode, int x, int y);
/* Set gamma on the CRTC */
void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
int size);
/* Driver cleanup routine */
void (*cleanup)(struct drm_crtc *crtc);
};
/**
* drm_crtc - central CRTC control structure
* @enabled: is this CRTC enabled?
* @x: x position on screen
* @y: y position on screen
* @desired_mode: new desired mode
* @desired_x: desired x for desired_mode
* @desired_y: desired y for desired_mode
* @funcs: CRTC control functions
* @driver_private: arbitrary driver data
*
* Each CRTC may have one or more outputs associated with it. This structure
* allows the CRTC to be controlled.
*/
struct drm_crtc {
struct drm_device *dev;
struct list_head head;
int id; /* idr assigned */
/* framebuffer the CRTC is currently bound to */
struct drm_framebuffer *fb;
bool enabled;
/* JJJ: are these needed? */
bool cursor_in_range;
bool cursor_shown;
struct drm_display_mode mode;
int x, y;
struct drm_display_mode *desired_mode;
int desired_x, desired_y;
const struct drm_crtc_funcs *funcs;
void *driver_private;
/* RRCrtcPtr randr_crtc? */
};
extern struct drm_crtc *drm_crtc_create(struct drm_device *dev,
const struct drm_crtc_funcs *funcs);
/**
* drm_output_funcs - control outputs on a given device
* @init: setup this output
* @dpms: set power state (see drm_crtc_funcs above)
* @save: save output state
* @restore: restore output state
* @mode_valid: is this mode valid on the given output?
* @mode_fixup: try to fixup proposed mode for this output
* @mode_set: set this mode
* @detect: is this output active?
* @get_modes: get mode list for this output
* @set_property: property for this output may need update
* @cleanup: output is going away, cleanup
*
* Each CRTC may have one or more outputs attached to it. The functions
* below allow the core DRM code to control outputs, enumerate available modes,
* etc.
*/
struct drm_output_funcs {
void (*init)(struct drm_output *output);
void (*dpms)(struct drm_output *output, int mode);
void (*save)(struct drm_output *output);
void (*restore)(struct drm_output *output);
int (*mode_valid)(struct drm_output *output,
struct drm_display_mode *mode);
bool (*mode_fixup)(struct drm_output *output,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*prepare)(struct drm_output *output);
void (*commit)(struct drm_output *output);
void (*mode_set)(struct drm_output *output,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
enum drm_output_status (*detect)(struct drm_output *output);
int (*get_modes)(struct drm_output *output);
/* JJJ: type checking for properties via property value type */
bool (*set_property)(struct drm_output *output, int prop, void *val);
void (*cleanup)(struct drm_output *output);
};
#define DRM_OUTPUT_LEN 32
/**
* drm_output - central DRM output control structure
* @crtc: CRTC this output is currently connected to, NULL if none
* @possible_crtcs: bitmap of CRTCS this output could be attached to
* @possible_clones: bitmap of possible outputs this output could clone
* @interlace_allowed: can this output handle interlaced modes?
* @doublescan_allowed: can this output handle doublescan?
* @available_modes: modes available on this output (from get_modes() + user)
* @initial_x: initial x position for this output
* @initial_y: initial y position for this output
* @status: output connected?
* @subpixel_order: for this output
* @mm_width: displayable width of output in mm
* @mm_height: displayable height of output in mm
* @name: name of output (should be one of a few standard names)
* @funcs: output control functions
* @driver_private: private driver data
*
* Each output may be connected to one or more CRTCs, or may be clonable by
* another output if they can share a CRTC. Each output also has a specific
* position in the broader display (referred to as a 'screen' though it could
* span multiple monitors).
*/
struct drm_output {
struct drm_device *dev;
struct list_head head;
struct drm_crtc *crtc;
int id; /* idr assigned */
unsigned long possible_crtcs;
unsigned long possible_clones;
bool interlace_allowed;
bool doublescan_allowed;
spinlock_t modes_lock; /* protects modes and probed_modes lists */
struct list_head modes; /* list of modes on this output */
/*
OptionInfoPtr options;
XF86ConfMonitorPtr conf_monitor;
*/
int initial_x, initial_y;
enum drm_output_status status;
/* these are modes added by probing with DDC or the BIOS */
struct list_head probed_modes;
/* xf86MonPtr MonInfo; */
enum subpixel_order subpixel_order;
int mm_width, mm_height;
struct drm_display_info *monitor_info; /* if any */
char name[DRM_OUTPUT_LEN];
const struct drm_output_funcs *funcs;
void *driver_private;
/* RROutputPtr randr_output? */
};
/**
* struct drm_mode_config_funcs - configure CRTCs for a given screen layout
* @resize: adjust CRTCs as necessary for the proposed layout
*
* Currently only a resize hook is available. DRM will call back into the
* driver with a new screen width and height. If the driver can't support
* the proposed size, it can return false. Otherwise it should adjust
* the CRTC<->output mappings as needed and update its view of the screen.
*/
struct drm_mode_config_funcs {
bool (*resize)(struct drm_device *dev, int width, int height);
};
/**
* drm_mode_config - Mode configuration control structure
*
*/
struct drm_mode_config {
spinlock_t config_lock; /* protects configuration and IDR */
struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, output, modes - just makes life easier */
/* this is limited to one for now */
int num_fb;
struct list_head fb_list;
int num_output;
struct list_head output_list;
/* int compat_output? */
int num_crtc;
struct list_head crtc_list;
int min_width, min_height;
int max_width, max_height;
/* DamagePtr rotationDamage? */
/* DGA stuff? */
struct drm_mode_config_funcs *funcs;
unsigned long fb_base;
};
struct drm_output *drm_output_create(struct drm_device *dev,
const struct drm_output_funcs *funcs,
const char *name);
extern void drm_output_destroy(struct drm_output *output);
extern bool drm_output_rename(struct drm_output *output, const char *name);
extern int drm_add_edid_modes(struct drm_output *output,
struct i2c_adapter *adapter);
extern void drm_mode_probed_add(struct drm_output *output, struct drm_display_mode *mode);
extern void drm_mode_remove(struct drm_output *output, struct drm_display_mode *mode);
extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
struct drm_display_mode *mode);
extern void drm_mode_debug_printmodeline(struct drm_device *dev,
struct drm_display_mode *mode);
extern void drm_mode_config_init(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
extern void drm_mode_set_name(struct drm_display_mode *mode);
extern void drm_disable_unused_functions(struct drm_device *dev);
extern struct drm_display_mode *drm_mode_create(struct drm_device *dev);
extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
extern void drm_mode_list_concat(struct list_head *head,
struct list_head *new);
extern void drm_mode_validate_size(struct drm_device *dev,
struct list_head *mode_list,
int maxX, int maxY, int maxPitch);
extern void drm_mode_prune_invalid(struct drm_device *dev,
struct list_head *mode_list, bool verbose);
extern void drm_mode_sort(struct list_head *mode_list);
extern int drm_mode_vrefresh(struct drm_display_mode *mode);
extern void drm_mode_set_crtcinfo(struct drm_display_mode *p,
int adjust_flags);
extern struct drm_display_mode *drm_crtc_mode_create(struct drm_device *dev);
extern bool drm_initial_config(struct drm_device *dev, bool cangrow);
extern void drm_framebuffer_set_object(struct drm_device *dev,
unsigned long handle);
extern bool drm_set_desired_modes(struct drm_device *dev);
extern int drmfb_probe(struct drm_device *dev, struct drm_framebuffer *fb);
extern int drmfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
/* IOCTLs */
extern int drm_mode_getresources(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_mode_getcrtc(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_mode_getoutput(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_mode_setcrtc(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_mode_addfb(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_mode_rmfb(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
extern int drm_mode_getfb(struct inode *inode, struct file *filp,
unsigned int cmd, unsigned long arg);
#endif /* __DRM_CRTC_H__ */
Reference in New Issue View Git Blame Copy Permalink