drm/linux-core/nouveau_bios.c

855 lines
27 KiB
C

/*
* Copyright (C) 2005-2006 Erik Waling
* Copyright (C) 2006 Stephane Marchesin
* Copyright (C) 2007-2008 Stuart Bennett
* Copyright (C) 2008 Maarten Maathuis.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#include <asm/byteorder.h>
#include "nouveau_bios.h"
#include "nouveau_drv.h"
/* returns true if it mismatches */
static bool nv_checksum(const uint8_t *data, unsigned int length)
{
/* there's a few checksums in the BIOS, so here's a generic checking function */
int i;
uint8_t sum = 0;
for (i = 0; i < length; i++)
sum += data[i];
if (sum)
return true;
return false;
}
static int nv_valid_bios(struct drm_device *dev, uint8_t *data)
{
/* check for BIOS signature */
if (!(data[0] == 0x55 && data[1] == 0xAA)) {
DRM_ERROR("BIOS signature not found.\n");
return 0;
}
if (nv_checksum(data, data[2] * 512)) {
DRM_ERROR("BIOS checksum invalid.\n");
return 1;
}
return 2;
}
static void nv_shadow_bios_rom(struct drm_device *dev, uint8_t *data)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
int i;
/* enable access to rom */
NV_WRITE(NV04_PBUS_PCI_NV_20, NV04_PBUS_PCI_NV_20_ROM_SHADOW_DISABLED);
/* This is also valid for pre-NV50, it just happened to be the only define already present. */
for (i=0; i < NV50_PROM__ESIZE; i++) {
/* Appearantly needed for a 6600GT/6800LE bug. */
data[i] = DRM_READ8(dev_priv->mmio, NV50_PROM + i);
data[i] = DRM_READ8(dev_priv->mmio, NV50_PROM + i);
data[i] = DRM_READ8(dev_priv->mmio, NV50_PROM + i);
data[i] = DRM_READ8(dev_priv->mmio, NV50_PROM + i);
data[i] = DRM_READ8(dev_priv->mmio, NV50_PROM + i);
}
/* disable access to rom */
NV_WRITE(NV04_PBUS_PCI_NV_20, NV04_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED);
}
static void nv_shadow_bios_ramin(struct drm_device *dev, uint8_t *data)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
uint32_t old_bar0_pramin = 0;
int i;
/* Move the bios copy to the start of ramin? */
if (dev_priv->card_type >= NV_50) {
uint32_t vbios_vram = (NV_READ(0x619f04) & ~0xff) << 8;
if (!vbios_vram)
vbios_vram = (NV_READ(0x1700) << 16) + 0xf0000;
old_bar0_pramin = NV_READ(0x1700);
NV_WRITE(0x1700, vbios_vram >> 16);
}
for (i=0; i < NV50_PROM__ESIZE; i++)
data[i] = DRM_READ8(dev_priv->mmio, NV04_PRAMIN + i);
if (dev_priv->card_type >= NV_50)
NV_WRITE(0x1700, old_bar0_pramin);
}
static bool nv_shadow_bios(struct drm_device *dev, uint8_t *data)
{
nv_shadow_bios_rom(dev, data);
if (nv_valid_bios(dev, data) == 2)
return true;
nv_shadow_bios_ramin(dev, data);
if (nv_valid_bios(dev, data))
return true;
return false;
}
struct bit_entry {
uint8_t id[2];
uint16_t length;
uint16_t offset;
};
static int parse_bit_A_tbl_entry(struct drm_device *dev, struct bios *bios, struct bit_entry *bitentry)
{
/* Parses the load detect value table.
*
* Starting at bitentry->offset:
*
* offset + 0 (16 bits): table pointer
*/
uint16_t load_table_pointer;
if (bitentry->length != 3) {
DRM_ERROR("Do not understand BIT loadval table\n");
return 0;
}
load_table_pointer = le16_to_cpu(*((uint16_t *)(&bios->data[bitentry->offset])));
if (load_table_pointer == 0x0) {
DRM_ERROR("Pointer to loadval table invalid\n");
return 0;
}
/* Some kind of signature */
if (bios->data[load_table_pointer] != 16 || bios->data[load_table_pointer + 1] != 4 ||
bios->data[load_table_pointer + 2] != 4 || bios->data[load_table_pointer + 3] != 2)
return 0;
bios->dactestval = le32_to_cpu(*((uint32_t *)&bios->data[load_table_pointer + 4])) & 0x3FF;
return 1;
}
static int parse_bit_C_tbl_entry(struct drm_device *dev, struct bios *bios, struct bit_entry *bitentry)
{
/* offset + 8 (16 bits): PLL limits table pointer
*
* There's more in here, but that's unknown.
*/
if (bitentry->length < 10) {
DRM_ERROR("Do not understand BIT C table\n");
return 0;
}
bios->pll_limit_tbl_ptr = le16_to_cpu(*((uint16_t *)(&bios->data[bitentry->offset + 8])));
return 1;
}
static void parse_bit_structure(struct drm_device *dev, struct bios *bios, const uint16_t bitoffset)
{
int entries = bios->data[bitoffset + 4];
/* parse i first, I next (which needs C & M before it), and L before D */
char parseorder[] = "iCMILDTA";
struct bit_entry bitentry;
int i, j, offset;
for (i = 0; i < sizeof(parseorder); i++) {
for (j = 0, offset = bitoffset + 6; j < entries; j++, offset += 6) {
bitentry.id[0] = bios->data[offset];
bitentry.id[1] = bios->data[offset + 1];
bitentry.length = le16_to_cpu(*((uint16_t *)&bios->data[offset + 2]));
bitentry.offset = le16_to_cpu(*((uint16_t *)&bios->data[offset + 4]));
if (bitentry.id[0] != parseorder[i])
continue;
switch (bitentry.id[0]) {
case 'A':
parse_bit_A_tbl_entry(dev, bios, &bitentry);
break;
case 'C':
parse_bit_C_tbl_entry(dev, bios, &bitentry);
break;
}
}
}
}
static uint16_t findstr(uint8_t *data, int n, const uint8_t *str, int len)
{
int i, j;
for (i = 0; i <= (n - len); i++) {
for (j = 0; j < len; j++)
if (data[i + j] != str[j])
break;
if (j == len)
return i;
}
return 0;
}
static void
read_dcb_i2c_entry(struct drm_device *dev, uint8_t dcb_version, uint16_t i2ctabptr, int index)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct bios *bios = &dev_priv->bios;
uint8_t *i2ctable = &bios->data[i2ctabptr];
uint8_t headerlen = 0;
int i2c_entries = MAX_NUM_DCB_ENTRIES;
int recordoffset = 0, rdofs = 1, wrofs = 0;
if (!i2ctabptr)
return;
if (dcb_version >= 0x30) {
if (i2ctable[0] != dcb_version) /* necessary? */
DRM_ERROR(
"DCB I2C table version mismatch (%02X vs %02X)\n",
i2ctable[0], dcb_version);
headerlen = i2ctable[1];
i2c_entries = i2ctable[2];
/* same address offset used for read and write for C51 and G80 */
if (bios->chip_version == 0x51)
rdofs = wrofs = 1;
if (i2ctable[0] >= 0x40)
rdofs = wrofs = 0;
}
/* it's your own fault if you call this function on a DCB 1.1 BIOS --
* the test below is for DCB 1.2
*/
if (dcb_version < 0x14) {
recordoffset = 2;
rdofs = 0;
wrofs = 1;
}
if (index == 0xf)
return;
if (index > i2c_entries) {
DRM_ERROR(
"DCB I2C index too big (%d > %d)\n",
index, i2ctable[2]);
return;
}
if (i2ctable[headerlen + 4 * index + 3] == 0xff) {
DRM_ERROR(
"DCB I2C entry invalid\n");
return;
}
if (bios->chip_version == 0x51) {
int port_type = i2ctable[headerlen + 4 * index + 3];
if (port_type != 4)
DRM_ERROR(
"DCB I2C table has port type %d\n", port_type);
}
if (i2ctable[0] >= 0x40) {
int port_type = i2ctable[headerlen + 4 * index + 3];
if (port_type != 5)
DRM_ERROR(
"DCB I2C table has port type %d\n", port_type);
}
dev_priv->dcb_table.i2c_read[index] = i2ctable[headerlen + recordoffset + rdofs + 4 * index];
dev_priv->dcb_table.i2c_write[index] = i2ctable[headerlen + recordoffset + wrofs + 4 * index];
}
static bool
parse_dcb_entry(struct drm_device *dev, int index, uint8_t dcb_version, uint16_t i2ctabptr, uint32_t conn, uint32_t conf)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct dcb_entry *entry = &dev_priv->dcb_table.entry[index];
memset(entry, 0, sizeof (struct dcb_entry));
entry->index = index;
/* safe defaults for a crt */
entry->type = 0;
entry->i2c_index = 0;
entry->heads = 1;
entry->bus = 0;
entry->location = LOC_ON_CHIP;
entry->or = 1;
entry->duallink_possible = false;
if (dcb_version >= 0x20) {
entry->type = conn & 0xf;
entry->i2c_index = (conn >> 4) & 0xf;
entry->heads = (conn >> 8) & 0xf;
entry->bus = (conn >> 16) & 0xf;
entry->location = (conn >> 20) & 0xf;
entry->or = (conn >> 24) & 0xf;
/* Normal entries consist of a single bit, but dual link has the
* adjacent more significant bit set too
*/
if ((1 << (ffs(entry->or) - 1)) * 3 == entry->or)
entry->duallink_possible = true;
switch (entry->type) {
case DCB_OUTPUT_LVDS:
{
uint32_t mask;
if (conf & 0x1)
entry->lvdsconf.use_straps_for_mode = true;
if (dcb_version < 0x22) {
mask = ~0xd;
/* both 0x4 and 0x8 show up in v2.0 tables; assume they mean
* the same thing, which is probably wrong, but might work */
if (conf & 0x4 || conf & 0x8)
entry->lvdsconf.use_power_scripts = true;
} else {
mask = ~0x5;
if (conf & 0x4)
entry->lvdsconf.use_power_scripts = true;
}
if (conf & mask) {
if (dcb_version < 0x40) { /* we know g80 cards have unknown bits */
DRM_ERROR("Unknown LVDS configuration bits, please report\n");
/* cause output setting to fail, so message is seen */
dev_priv->dcb_table.entries = 0;
return false;
}
}
break;
}
case 0xe:
/* weird type that appears on g80 mobile bios; nv driver treats it as a terminator */
return false;
}
read_dcb_i2c_entry(dev, dcb_version, i2ctabptr, entry->i2c_index);
} else if (dcb_version >= 0x14 ) {
if (conn != 0xf0003f00 && conn != 0xf2247f10 && conn != 0xf2204001 && conn != 0xf2204301 && conn != 0xf2244311 && conn != 0xf2045f14 && conn != 0xf2205004 && conn != 0xf2208001 && conn != 0xf4204011 && conn != 0xf4208011 && conn != 0xf4248011) {
DRM_ERROR(
"Unknown DCB 1.4 / 1.5 entry, please report\n");
/* cause output setting to fail, so message is seen */
dev_priv->dcb_table.entries = 0;
return false;
}
/* most of the below is a "best guess" atm */
entry->type = conn & 0xf;
if (entry->type == 4) { /* digital */
if (conn & 0x10)
entry->type = DCB_OUTPUT_LVDS;
else
entry->type = DCB_OUTPUT_TMDS;
}
/* what's in bits 5-13? could be some brooktree/chrontel/philips thing, in tv case */
entry->i2c_index = (conn >> 14) & 0xf;
/* raw heads field is in range 0-1, so move to 1-2 */
entry->heads = ((conn >> 18) & 0x7) + 1;
entry->location = (conn >> 21) & 0xf;
entry->bus = (conn >> 25) & 0x7;
/* set or to be same as heads -- hopefully safe enough */
entry->or = entry->heads;
switch (entry->type) {
case DCB_OUTPUT_LVDS:
/* this is probably buried in conn's unknown bits */
entry->lvdsconf.use_power_scripts = true;
break;
case DCB_OUTPUT_TMDS:
/* invent a DVI-A output, by copying the fields of the DVI-D output
* reported to work by math_b on an NV20(!) */
memcpy(&entry[1], &entry[0], sizeof(struct dcb_entry));
entry[1].type = DCB_OUTPUT_ANALOG;
dev_priv->dcb_table.entries++;
}
read_dcb_i2c_entry(dev, dcb_version, i2ctabptr, entry->i2c_index);
} else if (dcb_version >= 0x12) {
/* v1.2 tables normally have the same 5 entries, which are not
* specific to the card, so use the defaults for a crt */
/* DCB v1.2 does have an I2C table that read_dcb_i2c_table can handle, but cards
* exist (seen on nv11) where the pointer to the table points to the wrong
* place, so for now, we rely on the indices parsed in parse_bmp_structure
*/
entry->i2c_index = dev_priv->bios.legacy.i2c_indices.crt;
} else { /* pre DCB / v1.1 - use the safe defaults for a crt */
DRM_ERROR(
"No information in BIOS output table; assuming a CRT output exists\n");
entry->i2c_index = dev_priv->bios.legacy.i2c_indices.crt;
}
if (entry->type == DCB_OUTPUT_LVDS && dev_priv->bios.fp.strapping != 0xff)
entry->lvdsconf.use_straps_for_mode = true;
dev_priv->dcb_table.entries++;
return true;
}
static void merge_like_dcb_entries(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
/* DCB v2.0 lists each output combination separately.
* Here we merge compatible entries to have fewer outputs, with more options
*/
int i, newentries = 0;
for (i = 0; i < dev_priv->dcb_table.entries; i++) {
struct dcb_entry *ient = &dev_priv->dcb_table.entry[i];
int j;
for (j = i + 1; j < dev_priv->dcb_table.entries; j++) {
struct dcb_entry *jent = &dev_priv->dcb_table.entry[j];
if (jent->type == 100) /* already merged entry */
continue;
/* merge heads field when all other fields the same */
if (jent->i2c_index == ient->i2c_index && jent->type == ient->type && jent->location == ient->location && jent->or == ient->or) {
DRM_INFO(
"Merging DCB entries %d and %d\n", i, j);
ient->heads |= jent->heads;
jent->type = 100; /* dummy value */
}
}
}
/* Compact entries merged into others out of dcb_table */
for (i = 0; i < dev_priv->dcb_table.entries; i++) {
if ( dev_priv->dcb_table.entry[i].type == 100 )
continue;
if (newentries != i)
memcpy(&dev_priv->dcb_table.entry[newentries], &dev_priv->dcb_table.entry[i], sizeof(struct dcb_entry));
newentries++;
}
dev_priv->dcb_table.entries = newentries;
}
static unsigned int parse_dcb_table(struct drm_device *dev, struct bios *bios)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
uint16_t dcbptr, i2ctabptr = 0;
uint8_t *dcbtable;
uint8_t dcb_version, headerlen = 0x4, entries = MAX_NUM_DCB_ENTRIES;
bool configblock = true;
int recordlength = 8, confofs = 4;
int i;
dev_priv->dcb_table.entries = 0;
/* get the offset from 0x36 */
dcbptr = le16_to_cpu(*(uint16_t *)&bios->data[0x36]);
if (dcbptr == 0x0) {
DRM_ERROR(
"No Display Configuration Block pointer found\n");
/* this situation likely means a really old card, pre DCB, so we'll add the safe CRT entry */
parse_dcb_entry(dev, 0, 0, 0, 0, 0);
return 1;
}
dcbtable = &bios->data[dcbptr];
/* get DCB version */
dcb_version = dcbtable[0];
DRM_INFO(
"Display Configuration Block version %d.%d found\n",
dcb_version >> 4, dcb_version & 0xf);
if (dcb_version >= 0x20) { /* NV17+ */
uint32_t sig;
if (dcb_version >= 0x30) { /* NV40+ */
headerlen = dcbtable[1];
entries = dcbtable[2];
recordlength = dcbtable[3];
i2ctabptr = le16_to_cpu(*(uint16_t *)&dcbtable[4]);
sig = le32_to_cpu(*(uint32_t *)&dcbtable[6]);
DRM_INFO(
"DCB header length %d, with %d possible entries\n",
headerlen, entries);
} else {
i2ctabptr = le16_to_cpu(*(uint16_t *)&dcbtable[2]);
sig = le32_to_cpu(*(uint32_t *)&dcbtable[4]);
headerlen = 8;
}
if (sig != 0x4edcbdcb) {
DRM_ERROR(
"Bad Display Configuration Block signature (%08X)\n", sig);
return 0;
}
} else if (dcb_version >= 0x14) { /* some NV15/16, and NV11+ */
char sig[8];
memset(sig, 0, 8);
strncpy(sig, (char *)&dcbtable[-7], 7);
i2ctabptr = le16_to_cpu(*(uint16_t *)&dcbtable[2]);
recordlength = 10;
confofs = 6;
if (strcmp(sig, "DEV_REC")) {
DRM_ERROR(
"Bad Display Configuration Block signature (%s)\n", sig);
return 0;
}
} else if (dcb_version >= 0x12) { /* some NV6/10, and NV15+ */
i2ctabptr = le16_to_cpu(*(uint16_t *)&dcbtable[2]);
configblock = false;
} else { /* NV5+, maybe NV4 */
/* DCB 1.1 seems to be quite unhelpful - we'll just add the safe CRT entry */
parse_dcb_entry(dev, 0, dcb_version, 0, 0, 0);
return 1;
}
if (entries >= MAX_NUM_DCB_ENTRIES)
entries = MAX_NUM_DCB_ENTRIES;
for (i = 0; i < entries; i++) {
uint32_t connection, config = 0;
connection = le32_to_cpu(*(uint32_t *)&dcbtable[headerlen + recordlength * i]);
if (configblock)
config = le32_to_cpu(*(uint32_t *)&dcbtable[headerlen + confofs + recordlength * i]);
/* Should we allow discontinuous DCBs? Certainly DCB I2C tables can be discontinuous */
if ((connection & 0x0000000f) == 0x0000000f) /* end of records */
break;
if (connection == 0x00000000) /* seen on an NV11 with DCB v1.5 */
break;
DRM_INFO("Raw DCB entry %d: %08x %08x\n", i, connection, config);
if (!parse_dcb_entry(dev, dev_priv->dcb_table.entries, dcb_version, i2ctabptr, connection, config))
break;
}
merge_like_dcb_entries(dev);
return dev_priv->dcb_table.entries;
}
int nouveau_parse_bios(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
const uint8_t bit_signature[] = { 'B', 'I', 'T' };
int offset;
dev_priv->bios.data = kzalloc(NV50_PROM__ESIZE, GFP_KERNEL);
if (!dev_priv->bios.data)
return -ENOMEM;
if (!nv_shadow_bios(dev, dev_priv->bios.data))
return -EINVAL;
dev_priv->bios.length = dev_priv->bios.data[2] * 512;
if (dev_priv->bios.length > NV50_PROM__ESIZE)
dev_priv->bios.length = NV50_PROM__ESIZE;
if ((offset = findstr(dev_priv->bios.data, dev_priv->bios.length, bit_signature, sizeof(bit_signature)))) {
DRM_INFO("BIT BIOS found\n");
parse_bit_structure(dev, &dev_priv->bios, offset + 4);
} else {
DRM_ERROR("BIT BIOS not found\n");
return -EINVAL;
}
if (parse_dcb_table(dev, &dev_priv->bios))
DRM_INFO("Found %d entries in DCB\n", dev_priv->dcb_table.entries);
return 0;
}
/* temporary */
#define NV_RAMDAC_NVPLL 0x00680500
#define NV_RAMDAC_MPLL 0x00680504
#define NV_RAMDAC_VPLL 0x00680508
# define NV_RAMDAC_PLL_COEFF_MDIV 0x000000FF
# define NV_RAMDAC_PLL_COEFF_NDIV 0x0000FF00
# define NV_RAMDAC_PLL_COEFF_PDIV 0x00070000
# define NV30_RAMDAC_ENABLE_VCO2 (1 << 7)
#define NV_RAMDAC_VPLL2 0x00680520
bool get_pll_limits(struct drm_device *dev, uint32_t limit_match, struct pll_lims *pll_lim)
{
/* PLL limits table
*
* Version 0x10: NV31
* One byte header (version), one record of 24 bytes
* Version 0x11: NV36 - Not implemented
* Seems to have same record style as 0x10, but 3 records rather than 1
* Version 0x20: Found on Geforce 6 cards
* Trivial 4 byte BIT header. 31 (0x1f) byte record length
* Version 0x21: Found on Geforce 7, 8 and some Geforce 6 cards
* 5 byte header, fifth byte of unknown purpose. 35 (0x23) byte record
* length in general, some (integrated) have an extra configuration byte
*/
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct bios *bios = &dev_priv->bios;
uint8_t pll_lim_ver = 0, headerlen = 0, recordlen = 0, entries = 0;
int pllindex = 0;
uint32_t crystal_strap_mask, crystal_straps;
if (!bios->pll_limit_tbl_ptr) {
if (bios->chip_version >= 0x40 || bios->chip_version == 0x31 || bios->chip_version == 0x36) {
DRM_ERROR("Pointer to PLL limits table invalid\n");
return false;
}
} else {
pll_lim_ver = bios->data[bios->pll_limit_tbl_ptr];
DRM_INFO("Found PLL limits table version 0x%X\n", pll_lim_ver);
}
crystal_strap_mask = 1 << 6;
/* open coded pNv->twoHeads test */
if (bios->chip_version > 0x10 && bios->chip_version != 0x15 &&
bios->chip_version != 0x1a && bios->chip_version != 0x20)
crystal_strap_mask |= 1 << 22;
crystal_straps = NV_READ(NV50_PEXTDEV + 0x0) & crystal_strap_mask;
switch (pll_lim_ver) {
/* we use version 0 to indicate a pre limit table bios (single stage pll)
* and load the hard coded limits instead */
case 0:
break;
case 0x10:
case 0x11: /* strictly v0x11 has 3 entries, but the last two don't seem to get used */
headerlen = 1;
recordlen = 0x18;
entries = 1;
pllindex = 0;
break;
case 0x20:
case 0x21:
headerlen = bios->data[bios->pll_limit_tbl_ptr + 1];
recordlen = bios->data[bios->pll_limit_tbl_ptr + 2];
entries = bios->data[bios->pll_limit_tbl_ptr + 3];
break;
default:
DRM_ERROR("PLL limits table revision not currently supported\n");
return false;
}
/* initialize all members to zero */
memset(pll_lim, 0, sizeof(struct pll_lims));
if (pll_lim_ver == 0x10 || pll_lim_ver == 0x11) {
uint16_t plloffs = bios->pll_limit_tbl_ptr + headerlen + recordlen * pllindex;
pll_lim->vco1.minfreq = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs])));
pll_lim->vco1.maxfreq = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs + 4])));
pll_lim->vco2.minfreq = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs + 8])));
pll_lim->vco2.maxfreq = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs + 12])));
pll_lim->vco1.min_inputfreq = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs + 16])));
pll_lim->vco2.min_inputfreq = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs + 20])));
pll_lim->vco1.max_inputfreq = pll_lim->vco2.max_inputfreq = INT_MAX;
/* these values taken from nv30/31/36 */
pll_lim->vco1.min_n = 0x1;
if (bios->chip_version == 0x36)
pll_lim->vco1.min_n = 0x5;
pll_lim->vco1.max_n = 0xff;
pll_lim->vco1.min_m = 0x1;
pll_lim->vco1.max_m = 0xd;
pll_lim->vco2.min_n = 0x4;
/* on nv30, 31, 36 (i.e. all cards with two stage PLLs with this
* table version (apart from nv35)), N2 is compared to
* maxN2 (0x46) and 10 * maxM2 (0x4), so set maxN2 to 0x28 and
* save a comparison
*/
pll_lim->vco2.max_n = 0x28;
if (bios->chip_version == 0x30 || bios->chip_version == 0x35)
/* only 5 bits available for N2 on nv30/35 */
pll_lim->vco2.max_n = 0x1f;
pll_lim->vco2.min_m = 0x1;
pll_lim->vco2.max_m = 0x4;
} else if (pll_lim_ver) { /* ver 0x20, 0x21 */
uint16_t plloffs = bios->pll_limit_tbl_ptr + headerlen;
uint32_t reg = 0; /* default match */
int i;
/* first entry is default match, if nothing better. warn if reg field nonzero */
if (le32_to_cpu(*((uint32_t *)&bios->data[plloffs])))
DRM_ERROR("Default PLL limit entry has non-zero register field\n");
if (limit_match > MAX_PLL_TYPES)
/* we've been passed a reg as the match */
reg = limit_match;
else /* limit match is a pll type */
for (i = 1; i < entries && !reg; i++) {
uint32_t cmpreg = le32_to_cpu(*((uint32_t *)(&bios->data[plloffs + recordlen * i])));
if (limit_match == NVPLL && (cmpreg == NV_RAMDAC_NVPLL || cmpreg == 0x4000))
reg = cmpreg;
if (limit_match == MPLL && (cmpreg == NV_RAMDAC_MPLL || cmpreg == 0x4020))
reg = cmpreg;
if (limit_match == VPLL1 && (cmpreg == NV_RAMDAC_VPLL || cmpreg == 0x4010))
reg = cmpreg;
if (limit_match == VPLL2 && (cmpreg == NV_RAMDAC_VPLL2 || cmpreg == 0x4018))
reg = cmpreg;
}
for (i = 1; i < entries; i++)
if (le32_to_cpu(*((uint32_t *)&bios->data[plloffs + recordlen * i])) == reg) {
pllindex = i;
break;
}
plloffs += recordlen * pllindex;
DRM_INFO("Loading PLL limits for reg 0x%08x\n", pllindex ? reg : 0);
/* frequencies are stored in tables in MHz, kHz are more useful, so we convert */
/* What output frequencies can each VCO generate? */
pll_lim->vco1.minfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 4]))) * 1000;
pll_lim->vco1.maxfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 6]))) * 1000;
pll_lim->vco2.minfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 8]))) * 1000;
pll_lim->vco2.maxfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 10]))) * 1000;
/* What input frequencies do they accept (past the m-divider)? */
pll_lim->vco1.min_inputfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 12]))) * 1000;
pll_lim->vco2.min_inputfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 14]))) * 1000;
pll_lim->vco1.max_inputfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 16]))) * 1000;
pll_lim->vco2.max_inputfreq = le16_to_cpu(*((uint16_t *)(&bios->data[plloffs + 18]))) * 1000;
/* What values are accepted as multiplier and divider? */
pll_lim->vco1.min_n = bios->data[plloffs + 20];
pll_lim->vco1.max_n = bios->data[plloffs + 21];
pll_lim->vco1.min_m = bios->data[plloffs + 22];
pll_lim->vco1.max_m = bios->data[plloffs + 23];
pll_lim->vco2.min_n = bios->data[plloffs + 24];
pll_lim->vco2.max_n = bios->data[plloffs + 25];
pll_lim->vco2.min_m = bios->data[plloffs + 26];
pll_lim->vco2.max_m = bios->data[plloffs + 27];
pll_lim->unk1c = bios->data[plloffs + 28];
pll_lim->max_log2p_bias = bios->data[plloffs + 29];
pll_lim->log2p_bias = bios->data[plloffs + 30];
if (recordlen > 0x22)
pll_lim->refclk = le32_to_cpu(*((uint32_t *)&bios->data[plloffs + 31]));
if (recordlen > 0x23)
if (bios->data[plloffs + 35])
DRM_ERROR("Bits set in PLL configuration byte (%x)\n", bios->data[plloffs + 35]);
/* C51 special not seen elsewhere */
/*if (bios->chip_version == 0x51 && !pll_lim->refclk) {
uint32_t sel_clk = nv32_rd(pScrn, NV_RAMDAC_SEL_CLK);
if (((limit_match == NV_RAMDAC_VPLL || limit_match == VPLL1) && sel_clk & 0x20) ||
((limit_match == NV_RAMDAC_VPLL2 || limit_match == VPLL2) && sel_clk & 0x80)) {
if (nv_idx_port_rd(pScrn, CRTC_INDEX_COLOR, NV_VGA_CRTCX_REVISION) < 0xa3)
pll_lim->refclk = 200000;
else
pll_lim->refclk = 25000;
}
}*/
}
/* By now any valid limit table ought to have set a max frequency for
* vco1, so if it's zero it's either a pre limit table bios, or one
* with an empty limit table (seen on nv18)
*/
if (!pll_lim->vco1.maxfreq) {
pll_lim->vco1.minfreq = bios->fminvco;
pll_lim->vco1.maxfreq = bios->fmaxvco;
pll_lim->vco1.min_inputfreq = 0;
pll_lim->vco1.max_inputfreq = INT_MAX;
pll_lim->vco1.min_n = 0x1;
pll_lim->vco1.max_n = 0xff;
pll_lim->vco1.min_m = 0x1;
if (crystal_straps == 0) {
/* nv05 does this, nv11 doesn't, nv10 unknown */
if (bios->chip_version < 0x11)
pll_lim->vco1.min_m = 0x7;
pll_lim->vco1.max_m = 0xd;
} else {
if (bios->chip_version < 0x11)
pll_lim->vco1.min_m = 0x8;
pll_lim->vco1.max_m = 0xe;
}
}
if (!pll_lim->refclk)
switch (crystal_straps) {
case 0:
pll_lim->refclk = 13500;
break;
case (1 << 6):
pll_lim->refclk = 14318;
break;
case (1 << 22):
pll_lim->refclk = 27000;
break;
case (1 << 22 | 1 << 6):
pll_lim->refclk = 25000;
break;
}
#if 1 /* for easy debugging */
DRM_INFO("pll.vco1.minfreq: %d\n", pll_lim->vco1.minfreq);
DRM_INFO("pll.vco1.maxfreq: %d\n", pll_lim->vco1.maxfreq);
DRM_INFO("pll.vco2.minfreq: %d\n", pll_lim->vco2.minfreq);
DRM_INFO("pll.vco2.maxfreq: %d\n", pll_lim->vco2.maxfreq);
DRM_INFO("pll.vco1.min_inputfreq: %d\n", pll_lim->vco1.min_inputfreq);
DRM_INFO("pll.vco1.max_inputfreq: %d\n", pll_lim->vco1.max_inputfreq);
DRM_INFO("pll.vco2.min_inputfreq: %d\n", pll_lim->vco2.min_inputfreq);
DRM_INFO("pll.vco2.max_inputfreq: %d\n", pll_lim->vco2.max_inputfreq);
DRM_INFO("pll.vco1.min_n: %d\n", pll_lim->vco1.min_n);
DRM_INFO("pll.vco1.max_n: %d\n", pll_lim->vco1.max_n);
DRM_INFO("pll.vco1.min_m: %d\n", pll_lim->vco1.min_m);
DRM_INFO("pll.vco1.max_m: %d\n", pll_lim->vco1.max_m);
DRM_INFO("pll.vco2.min_n: %d\n", pll_lim->vco2.min_n);
DRM_INFO("pll.vco2.max_n: %d\n", pll_lim->vco2.max_n);
DRM_INFO("pll.vco2.min_m: %d\n", pll_lim->vco2.min_m);
DRM_INFO("pll.vco2.max_m: %d\n", pll_lim->vco2.max_m);
DRM_INFO("pll.unk1c: %d\n", pll_lim->unk1c);
DRM_INFO("pll.max_log2p_bias: %d\n", pll_lim->max_log2p_bias);
DRM_INFO("pll.log2p_bias: %d\n", pll_lim->log2p_bias);
DRM_INFO("pll.refclk: %d\n", pll_lim->refclk);
#endif
return true;
}