It is like test/stringcomp, only instead of using
xkb_keymap_new_from_string(), it uses xkbcomp to upload the keymap to a
dummy Xvfb X server and then xkb_x11_keymap_new_from_device().
If any of these components are not present or fails, the test is shown
as skipped.
The test is messy, fragile, limited and depends on external tools, but I
will improve on that later -- it's better to have a test.
Signed-off-by: Ran Benita <ran234@gmail.com>
With the following two rules:
InterpretDecl : INTERPRET InterpretMatch OBRACE
VarDeclList
CBRACE SEMI
{ $2->def = $4; $$ = $2; }
;
InterpretMatch : KeySym PLUS Expr
{ $$ = InterpCreate($1, $3); }
| KeySym
{ $$ = InterpCreate($1, NULL); }
;
And the fact that InterpCreate doesn't initialize ->def, if the
VarDeclList fails, the %destructor tries to recursively free the
uninitialized ->def VarDef. So always initialize it.
That was the only problematic code in the parser for %destructor (I'm
pretty sure).
Signed-off-by: Ran Benita <ran234@gmail.com>
We didn't really have any. It also a exposes a memory leak, since the
parser doesn't clean up the AST nodes of the discarded symbols.
Signed-off-by: Ran Benita <ran234@gmail.com>
The current calculation is in short:
entry ? (entry->mask & ~entry->preserve) : 0
This changes it be
type->mask & ~(entry ? entry->preserve : 0)
This is what Xlib does. While less intuitive, it is actually more
correct, if you follow this deduction:
- The key group's type->mask defines which modifiers the key even cares
about. The others are completely irrelevant (and in fact they are
masked out from all sided in the level calculation). Example: NumLock
for an alphabetic key.
- The type->mask, the mods which are not masked out, are *all* relevant
(and in fact in the level calculation they must match *exactly* to the
state). These mods affect which level is chosen for the key, whether
they are active or not.
- Because the type->mask mods are all relevant, they must be considered
as consumed by the calculation *even if they are not active*.
Therefore we use type->mask instead of entry->mask.
The second change is what happens when no entry is found: return 0 or
just take preserve to be 0? Let's consider an example, the basic type
type "ALPHABETIC" {
modifiers = Shift+Lock;
map[Shift] = Level2;
map[Lock] = Level2;
level_name[Level1] = "Base";
level_name[Level2] = "Caps";
};
Suppose Shift+Lock is active - it doesn't match any entry, thus it gets
to level 0. The first interpretation would take them both to be
unconsumed, the second (new one) would take them both to be consumed.
This seems much better: Caps is active, and Shift disables it, they both
do something.
This change also fixes a pretty lousy bug (since 0.3.2), where Shift
appears to apparently *not* disable Caps. What actually happens is that
Caps is not consumed (see above) but active, thus the implicit
capitalization in get_one_sym() kicks in and capitalizes it anyway.
Reported-by: Davinder Pal Singh Bhamra
Signed-off-by: Ran Benita <ran234@gmail.com>
These functions generally have the same effect as
xkb_state_key_get_syms() + xkb_keysym_to_utf{8,32}().
So why add them?
- They provide a slightly nicer interface, especially if the string is
the only interest.
- It makes the handling of multiple-keysyms-to-utf8 transparent. For the
designated use-case of multiple-keysyms (unicode combining
characters), this is a must. We also validate the UTF-8, which the
user might not otherwise do.
- We will need to apply some transformation on the resulting string
which depend on the xkb_state. This is not possible with the
xkb_keysym_* functions.
With these functions, the existing xkb_keysym_to_utf{8,32}() are not
expected to be used by a typical user; they are "raw" functions.
Signed-off-by: Ran Benita <ran234@gmail.com>
We need to validate some UTF-8, so this adds an is_valid_utf8()
function, which is probably pretty slow but should work correctly.
Signed-off-by: Ran Benita <ran234@gmail.com>
- Specify in detail which parts of the events we care about. In theory
the X server should not bother us with things we didn't ask for. In
practice it still does, but oh well.
- Use the _aux version of select_events. This is the correct one to use,
the non-aux version is useless.
Signed-off-by: Ran Benita <ran234@gmail.com>
This retrieves the mask of consumed modifiers for a given key and state,
which is helpful for toolkits without having them to do it one modifier
at a time, or pass in 0xFFFFFFFF to xkb_state_remove_consumed_mods to
"reverse-engineer" the consumed mods.
It's the same as no flags, so might as well not print it.
(In fact it is slightly harmful, because it actively *clears* the affect
flags, which might have been set in some other manner. But in practice
this cannot happen).
Signed-off-by: Ran Benita <ran234@gmail.com>
The PLACEHOLDER was not meant to be used, but c++ doesn't like passing 0
to enums, so it was used. For this reason we add all the NO_FLAGS items,
so the PLACEHOLDER shouldn't be used anymore.
Second, XKB_MAP is the prefix we used ages ago, KEYMAP is the expected
prefix here. So deprecate that as well.
The old names may still be used through the xkbcommon-compat.h header,
which is included by default (no need to include directly).
Signed-off-by: Ran Benita <ran234@gmail.com>
Add two tests:
./test/interactive-x11
which is like test/interactive-evdev, but should behave exactly like your
X keyboard and react to state and keymap changes - in other words, just
like typing in xterm. Press ESC to exit.
./test/x11
which currently should only print out the same keymap as
xkbcomp $DISPLAY out.xkb
(modulo some whitespace and some constructs we do not support.)
Signed-off-by: Ran Benita <ran234@gmail.com>
These functions also return -1 on invalid input. The original tests
didn't check that, but used !tests instead. Since then we've changed
them, but some were missed, and for some we forgot to remove the ! (or
you can say they were extra clever).
Signed-off-by: Ran Benita <ran234@gmail.com>
Someone was nice enough to run this for us:
ftp://ftp.sunet.se/pub/Linux/distributions/Debian/debian/pool/main/libx/libxkbcommon/libxkbcommon_0.3.1.orig.tar.gz
[libxkbcommon-0.3.1/src/keymap.c:86]: (style) The scope of the variable 'j' can be reduced.
[libxkbcommon-0.3.1/src/keymap.c:87]: (style) The scope of the variable 'key' can be reduced.
[libxkbcommon-0.3.1/src/keysym-utf.c:843]: (style) The scope of the variable 'mid' can be reduced.
[libxkbcommon-0.3.1/src/state.c:992]: (style) The scope of the variable 'str' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/action.c:467]: (style) The scope of the variable 'absolute' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/rules.c:468]: (style) The scope of the variable 'consumed' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/rules.c:862]: (style) The scope of the variable 'mlvo' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/rules.c:863]: (style) The scope of the variable 'kccgst' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/rules.c:865]: (style) The scope of the variable 'match_type' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/symbols.c:753]: (style) The scope of the variable 'toAct' can be reduced.
[libxkbcommon-0.3.1/src/xkbcomp/symbols.c:1573]: (style) The scope of the variable 'key' can be reduced.
[libxkbcommon-0.3.1/test/common.c:80]: (warning) %d in format string (no. 1) requires 'int' but the argument type is 'unsigned int'.
[libxkbcommon-0.3.1/test/interactive.c:358]: (style) The scope of the variable 'nevs' can be reduced.
[libxkbcommon-0.3.1/test/interactive.c:236]: (style) Checking if unsigned variable 'nsyms' is less than zero.
[libxkbcommon-0.3.1/test/interactive.c:226]: (style) Unused variable: unicode
Signed-off-by: Ran Benita <ran234@gmail.com>
1000 is a bit too low for statistical significance on this 6 years old
CPU. Since the benchmark is run manually this shouldn't be a problem.
Signed-off-by: Ran Benita <ran234@gmail.com>
The xkbproto spec says:
http://www.x.org/releases/current/doc/kbproto/xkbproto.html#Interpreting_the_Lock_Modifier
If the Lock modifier is not consumed by the symbol lookup process,
routines that determine the symbol and string that correspond to
an event should capitalize the result.
This was not an issue until now, because most xkeyboard-config keymaps
do not utilize this "feature", and specify the keysyms for the Lock
modifier explicitly instead. However, some keymaps do depend on it, e.g.
ch(fr) for eacute and others.
The spec goes on to describe two options for doing this transformation:
locale-sensitive and locale-insensitive. We opt for the latter; it is
less desirable but we don't want *that* headache.
Also, only xkb_state_key_get_one_sym() is changed;
xkb_state_key_get_syms() is left as-is, and always reports the
untransformed keysyms. This is for the following reasons:
- The API doesn't allow it, since we return a const pointer directly to
the keymap keysyms table and we can't transform that.
- The transformation doesn't make sense for multiple-keysyms.
- It can be useful for an application to get the "raw" keysyms if it
wants to (e.g. maybe it wants to do the transformation itself).
Finally, note that xkb_state_mod_index_is_consumed() does *not*
report Lock as consumed even if it was used in the transformation. This
is what Xlib does.
This definitely doesn't fall under the "hard to misuse" API rule but
it's the best we can do.
https://bugs.freedesktop.org/show_bug.cgi?id=67167
Reported-By: Gatis Paeglis <gatis.paeglis@digia.com>
Signed-off-by: Ran Benita <ran234@gmail.com>
Kind of odd, but get_one_sym() will be getting a different behavior.
Real life users *should* pick one or the other.
Signed-off-by: Ran Benita <ran234@gmail.com>
This is too strict, and causes symbols/cz to fail parsing. Instead, just
emit a warning (not shown by default):
xkbcommon: WARNING: cz:75:19: unknown escape sequence in string literal
https://bugs.freedesktop.org/show_bug.cgi?id=68056
Reported-By: Gatis Paeglis <gatis.paeglis@digia.com>
Signed-off-by: Ran Benita <ran234@gmail.com>
Some keymaps actually have this, like the quartz.xkb which is tested. We
need to support these.
https://bugs.freedesktop.org/show_bug.cgi?id=67654
Reported-By: Gatis Paeglis <gatis.paeglis@digia.com>
Signed-off-by: Ran Benita <ran234@gmail.com>
We should handle empty xkb_keycode and xkb_symbol sections, since
xkbcomp handles them, and apparently XQuartz uses it. There are also
files for it in xkeyboard-config (rules=base model=empty layout=empty,
which translate to keycodes/empty and symbols/empty).
https://bugs.freedesktop.org/show_bug.cgi?id=67654
Reported-By: Gatis Paeglis <gatis.paeglis@digia.com>
Signed-off-by: Ran Benita <ran234@gmail.com>
PATH_MAX is optional in POSIX, so avoid its unconditional usage
allocating and freeing buffers as needed.
To avoid too many malloc/free in the for loop in FindFileInXkbPath,
a buffer is grown according to the size needed at each iteration.
Needed for some tests. The tests need some adjustment, mostly because of
the resolution of xkeyboard-config bug
https://bugs.freedesktop.org/show_bug.cgi?id=50935
Also add the 'ch' symbols file for future tests.
Signed-off-by: Ran Benita <ran234@gmail.com>
This ensures the names are escaped before having any interaction with
the user.
This was caught by noticing dump(compile(dump())) != dump. Since that's
a nice test we add it to stringcomp.
https://bugs.freedesktop.org/show_bug.cgi?id=67032
Reported-By: Auke Booij
Signed-off-by: Ran Benita <ran234@gmail.com>
Add three new pieces of API:
- xkb_keymap_min_keycode does what it says on the tin
- xkb_keymap_max_keycode likewise
- xkb_keymap_key_for_each calls the provided function once for every
valid key in the keymap
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
If the keycode range is smaller than 8 → 255, artifically widen it when
dumping the keymap as not to displease X.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
The current API doesn't allow the caller to create keymaps from mmap()'ed
files. The problem is, xkb_keymap_new_from_string() requires a terminating
0 byte. However, there is no way to guarantee that when using mmap() so a
user currently has to copy the whole file just to get the terminating zero
byte (assuming they cannot use xkb_keymap_new_from_file()).
This adds a new entry xkb_keymap_new_from_buffer() which takes a memory
location and the buffer size in bytes.
Internally, we depend on yy_scan_{string,byte}() helpers. According to
flex documentation these already copy the input string because they are
wrappers around yy_scan_buffer().
yy_scan_buffer() on the other hand has some insane requirements. The
buffer must be writeable and the last two bytes must be ASCII-NUL. But the
buffer may contain other 0 bytes just fine.
Because we don't want these constraints in our public API,
xkb_keymap_new_from_buffer() needs to create a copy of the input memory.
But it then calls yy_scan_buffer() directly. Hence, we have the same
number of buffer-copies as with *_from_string() but without the
terminating 0 requirement.
The explicit yy_scan_buffer() call is preferred over yy_scan_byte() so the
buffer-copy operation is not hidden somewhere in flex.
Maybe some day we no longer depend on flex and can have a zero-copy API. A
user could mmap() a file and it would get parsed right from this buffer.
But until then, we shouldn't expose this limitation in the API but instead
provide an API that some day can work with zero-copy.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
[ran: rebased on top of my branch]
Conflicts:
Makefile.am
src/xkbcomp/xkbcomp.c
Previously we allowed you to pass a names struct with five NULL members,
but not just pass NULL for the struct itself. This was pretty dumb. :(
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
You can now set default values in the environment, as well as a context
option to ignore the environment, e.g. for tests.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Ran Benita
Jasper St. Pierre
Pino Toscano
Matthias Clasen
Daniel Stone
David Herrmann