The implementation of changing the default properties of actions, e.g. a
statements such as (from test/data/compat/basic):
setMods.clearLocks= True;
latchMods.clearLocks= True;
latchMods.latchToLock= True;
works by keeping a list of ActionInfo's, each containing the neccesary
info from each statement, and then when some action comes up (e.g. in an
interpret statment) it goes through the list, and applies the relevent
ActionInfo's to the newly-constructed xkb_action.
Instead of doing this, we add a struct ActionsInfo, which contains an
array of xkb_actions, one for each type. When a default changing
statement appears, we change the action in the array; when a new action
comes up, we just copy from the array. This is simpler to figure out,
and pretty straightforward.
Signed-off-by: Ran Benita <ran234@gmail.com>
Currently where it is possible to write:
setMods.clearLocks = True;
It's also possible to write:
action.clearLocks = True;
This will set the default value for the clearLocks action field for
*all* action types, as opposed to just setMods in this case. If
subsequently an action is used for which this field does not make sense,
it will error out.
This doesn't make any sense, because any given field is only possible by at
most 3 or 4 action types... which you might as well write explicitly and
avoid the side effect mentioned above.
Needless to say this is one of xkbcomp's "hidden features" and is not
used anywhere; remove it.
Signed-off-by: Ran Benita <ran234@gmail.com>
Add CompileKeymap to do most of what compile_keymap_file does now, and
move UpdateKeymapFromModifiers along with it from (mostly unrelated)
compat.c.
Also rename UpdateKeymapFromModifiers to UpdateDerivedKeymapFields,
because it does more than update the modifiers.
Signed-off-by: Ran Benita <ran234@gmail.com>
We make the xkb_file_type enum sequential instead of masks, and then
we don't have to repeat the file types several times in the function.
Makes the code cleaner.
Signed-off-by: Ran Benita <ran234@gmail.com>
This function was always returning -1.
Adding a test, we see that test/state.c treat the is_active functions as
returning booleans, which would treat -1 as success, so we test for > 0
instead (most users would probably get this wrong as well...).
Also update the documentation for the are_active functions, and add a
ATTR_NULL_SENTINEL for gcc __attribute__((sentinel)).
Signed-off-by: Ran Benita <ran234@gmail.com>
For the indicator to be set, it is sufficient for at least one of the
group, modifier, or control state to match; this is in line with the
xkblib spec, section 8.2 and ComputeAutoState() in xserver/xkb/xkbLEDs.c
(though the xserver implementation differs from the spec on some
points...).
This also adds a tiny optimization to skip the entire check if the mask
is empty.
Signed-off-by: Ran Benita <ran234@gmail.com>
This is only relevant to the virtualModifier= statement in interpret
statements in xkb_compat. The current code allows to write e.g.
virtualModifier = 4
to get the virtual modifier whose index happens to be 4 (possibly
declared in other files or sections, i.e. xkb_types). Doing this is
undeterministic, will break without notice, and not used anywhere.
Don't allow it.
Signed-off-by: Ran Benita <ran234@gmail.com>
The current code supports statements such as:
virtual_modifiers NumLock = Mod2;
This would set the mapping from the NumLock vmod to the Mod2 real mod
directly, without going through the virtualModifier field in an
interpret statement (in xkb_compat) or vmods field in a key statement
(in xkb_symbols).
This is undocumented, unused and complicates things, so remove it.
Signed-off-by: Ran Benita <ran234@gmail.com>
It's currently possible to write something like this:
interpret Num_Lock+Any {
virtualModifier = NumLock;
action = LockMods(modifiers=NumLock);
!indicator.allowExplicit;
};
The final statement has the same effect as writing it in the global file
scope, which changes the default indicator (which all subsequent
indicators start off as). This very strange and also unused; if someone
does it he probably expects it to affect only the local scope, and he
might then get unexpected behavior. So don't allow it.
Also, HandleInterpVar is clearly a misnomer (as it can also change
indicator defaults) so rename it.
Signed-off-by: Ran Benita <ran234@gmail.com>
Using !allowExplicit sets the XkbIM_NoExplicit flag of the indicator,
which means that an XKB client cannot change the state of the indicator
using e.g. XkbSetNamedIndicator().
We do not support changing the state of an indicator; furthermore doing
it is probably only useful in conjunction with led-drives-keyboard
behavior, which we also do not support. This is because setting an
indicator without led-drives-keyboard would make the indicator and the
modifier/group it's bound to to get out of sync.
We can re-add this if we need this info.
Signed-off-by: Ran Benita <ran234@gmail.com>
We don't support it, as mentioned in the README, so we should stop
processing it and print a message about it.
Signed-off-by: Ran Benita <ran234@gmail.com>
Group compatibility statements are like the following:
group 3 = AltGr;
This currently results in:
keymap->groups[2].mask = <real mod mapped from AltGr vmod>
And we don't do any thing with this value later. The reason it exists in
XKB is to support non-XKB clients (i.e. XKB support disabled entirely in
the server), which do not know the concept of "group", and use some
modifier to distinguish between the first and second keyboard layouts
(usually with the AltGr key). We don't care about all of that, so we can
forget about it.
One artifact of this removal is that xkb_map_num_groups no longer
works, because it counted through keymap->groups (this wasn't entirely
correct BTW). Instead we add a new num_groups member to the keymap,
which just hold the maximum among the xkb_key's num_groups. This also
means we don't have to compute anything just to get the number of
groups.
Signed-off-by: Ran Benita <ran234@gmail.com>
Now that 1fba6189e67 removed support for binding indicator maps by index
instead of name, we can remove some more magic which happens now: if an
indicator map specifies an indicator name which was not previously
declared in a 'indicator 5 = "Caps Lock"'-like statement in
xkb_keycodes, we can just look at the next free index and assign it.
This also allows us to use a darray for the LEDInfo's instead of a list.
Signed-off-by: Ran Benita <ran234@gmail.com>
The current code allows to set the "index" field in an indicator
statment's body. This would bind the indicator to the specified index,
instead of by name (which was declared previously in xkb_keycodes).
Doing this is a bad idea, for the same reasons as in 3cd9704, and is
also happily not used anywhere.
Signed-off-by: Ran Benita <ran234@gmail.com>
The xkblib spec, table 7.1 (indicators), says:
XkbIM_NoAutomatic: Xkb does not automatically change the value of the
indicator based upon a change in the keyboard state,
regardless of the values for the other fields of the
indicator map.
xkbcomp (the real one) never actually implemented a way for an indicator
statement to set this flag, so it's just dead unused code. We definitely
don't want to implement it ourselves, so remove any mention of it.
Signed-off-by: Ran Benita <ran234@gmail.com>
This field is used in conjunction with key behaviors, which we don't
support since c1ea23da5. This is also unused in xkeyboard-config.
Signed-off-by: Ran Benita <ran234@gmail.com>
Since we now handle empty model/layout, the last couple of tests should
not fail. The reason they do is bacause they try to use a non-existent
"base" rules file. When the file is brought in these tests do not fail.
Since we already test for non-existent rules file, we can remove them,
and refine the other tests a bit.
Signed-off-by: Ran Benita <ran234@gmail.com>
Various non-functional changes:
- Re-add keycodes.h and move some stuff there.
- Add parser-priv.h for internal bison/flex stuff.
- Don't include headers from other headers, such that file dependencies
are immediate in each file.
- Rename xkbcomp.h -> ast.h, parseutils.{c,h} -> ast-build.{c,h}
- Rename path.{c,h} -> include.{c,h}
- Rename keytypes.c -> types.c
- Make the naming of XkbFile-related functions more consistent.
- Move xkb_map_{new,ref,unref} to map.c.
- Remove most extern keyword from function declarations, it's just
noise (XKB_EXPORT is what's important here).
- Append XKBCOMP_ to include guards.
- Shuffle some code around to make all of this work.
Splitting this would be a headache..
Signed-off-by: Ran Benita <ran234@gmail.com>
Ran Benita