- acinclude/alsa.m4, esd.m4: Ran through autoupdate to replace several
AC_TRY_[COMPILE|LINK|RUN] with corresponding AC_???_IFELSE , so that
autoconf-2.70 doesn't warn.
- sdl2.m4: Ditto.
- test/acinclude.m4 (sdl2): Ditto.
- remove HP/UX 9 (%@#!) support
- change fopen() mode from "a" to "w" in test code.
- bump its serial num to 2.
- test/acinclude.m4: same sdl2.m4 updates.
Specifically this patch which does not invoke _AC_PATH_X_XMKMF and
_AC_PATH_X_DIRECT internal autoconf routines when cross-compiling:
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commitdiff;h=33c3a47c04ab70a4dd54963fe433a171bc03747f
Without this, CFLAGS would brokenly have system include paths like
-I/usr/include/X11 when cross-compiling e.g. for windows. (And it
also resulted in annoying imake crashes for my setup...)
configure output is practically unchanged. there are still lots of
AC_TRY_COMPILE/AC_TRY_LINK replacements needed to really eliminate
the warnings, but that's for another time.
- SDL_video.c (SDL_ShowMessageBox): replace messageboxdata, set title
or message field to "" if either of them is NULL.
- SDL_video.c (SDL_ShowSimpleMessageBox): set title or message to ""
if either of them is NULL for EMSCRIPTEN builds.
- SDL_bmessagebox.cc: add empty string check along with NULL check for
title and message fields.
- SDL_windowsmessagebox.c (AddDialogString): remove NULL string check
- SDL_windowsmessagebox.c (AddDialogControl): add empty string check
along with the NULL check.
- SDL_x11messagebox.c: revert commit 677c4cd68069
- SDL_os2messagebox.c: revert commit 2c2a489d76e7
- test/testmessage.c: Add NULL title and NULL message tests.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
This uses pre-recorded evdev capabilities, so that we can check for
regressions without the devices having to be physically present.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
The warnings were produced by GCC 9.2.x for x86_64-linux-gnu or
i386-pc-msdosdjgpp targets.
Most of the fixes involve changing the type of a variable rather than
the format specifier. For many of the affected test conuter variables,
a basic int seems sufficient.
Some format specifier warnings still remain for cases where changing
type or casting seemed inappropriate. Those warnings will probably
require some new format specifier macros (e.g. SDL_PRIu32).
DominikD
There are several tests that need resources in the output directory to work:
* `testiconv` depends on `utf8.txt`
* `testoverlay2` and `teststreaming` depend on `moose.dat`
This patch adds these two files to the `RESOURCE_FILES` variable.
One could also copy `shapes\*.bmp` over to the output directory for `testshape` to use but this patch doesn't do that for three reasons:
* executable takes path as an argument and doesn't need these files side by side
* these are ~45MB and copying them over would cause build directory to swell
* there are already files in the output directory that can be used with this test (`sample.bmp` and `button.bmp`)
David Ludwig
I have created a new driver for SDL's Joystick and Game-Controller subsystem: a Virtual driver. This driver allows one to create a software-based joystick, which to SDL applications will look and react like a real joystick, but whose state can be set programmatically. A primary use case for this is to help enable developers to add touch-screen joysticks to their apps.
The driver comes with a set of new, public APIs, with functions to attach and detach joysticks, set virtual-joystick state, and to determine if a joystick is a virtual-one.
Use of virtual joysticks goes as such:
1. Attach one or more virtual joysticks by calling SDL_JoystickAttachVirtual. If successful, this returns the virtual-device's joystick-index.
2. Open the virtual joysticks (using indicies returned by SDL_JoystickAttachVirtual).
3. Call any of the SDL_JoystickSetVirtual* functions when joystick-state changes. Please note that virtual-joystick state will only get applied on the next call to SDL_JoystickUpdate, or when pumping or polling for SDL events (via SDL_PumpEvents or SDL_PollEvent).
Here is a listing of the new, public APIs, at present and subject to change:
------------------------------------------------------------
/**
* Attaches a new virtual joystick.
* Returns the joystick's device index, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickAttachVirtual(SDL_JoystickType type, int naxes, int nballs, int nbuttons, int nhats);
/**
* Detaches a virtual joystick
* Returns 0 on success, or -1 if an error occurred.
*/
extern DECLSPEC int SDLCALL SDL_JoystickDetachVirtual(int device_index);
/**
* Indicates whether or not a virtual-joystick is at a given device index.
*/
extern DECLSPEC SDL_bool SDLCALL SDL_JoystickIsVirtual(int device_index);
/**
* Set values on an opened, virtual-joystick's controls.
* Returns 0 on success, -1 on error.
*/
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualAxis(SDL_Joystick * joystick, int axis, Sint16 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualBall(SDL_Joystick * joystick, int ball, Sint16 xrel, Sint16 yrel);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualButton(SDL_Joystick * joystick, int button, Uint8 value);
extern DECLSPEC int SDLCALL SDL_JoystickSetVirtualHat(SDL_Joystick * joystick, int hat, Uint8 value);
------------------------------------------------------------
Miscellaneous notes on the initial patch, which are also subject to change:
1. no test code is present in SDL, yet. This should, perhaps, change. Initial development was done with an ImGui-based app, which potentially is too thick for use in SDL-official. If tests are to be added, what kind of tests? Automated? Graphical?
2. virtual game controllers can be created by calling SDL_JoystickAttachVirtual with a joystick-type of SDL_JOYSTICK_TYPE_GAME_CONTROLLER, with naxes (num axes) set to SDL_CONTROLLER_AXIS_MAX, and with nbuttons (num buttons) set to SDL_CONTROLLER_BUTTON_MAX. When updating their state, values of type SDL_GameControllerAxis or SDL_GameControllerButton can be casted to an int and used for the control-index (in calls to SDL_JoystickSetVirtual* functions).
3. virtual joysticks' guids are mostly all-zeros with the exception of the last two bytes, the first of which is a 'v', to indicate that the guid is a virtual one, and the second of which is a SDL_JoystickType that has been converted into a Uint8.
4. virtual joysticks are ONLY turned into virtual game-controllers if and when their joystick-type is set to SDL_JOYSTICK_TYPE_GAMECONTROLLER. This is controlled by having SDL's default list of game-controllers have a single entry for a virtual game controller (of guid, "00000000000000000000000000007601", which is subject to the guid-encoding described above).
5. regarding having to call SDL_JoystickUpdate, either directly or indirectly via SDL_PumpEvents or SDL_PollEvents, before new virtual-joystick state becomes active (as specified via SDL_JoystickSetVirtual* function-calls), this was done to match behavior found in SDL's other joystick drivers, almost all of which will only update SDL-state during SDL_JoystickUpdate.
6. the initial patch is based off of SDL 2.0.12
7. the virtual joystick subsystem is disabled by default. It should be possible to enable it by building with SDL_JOYSTICK_VIRTUAL=1
Questions, comments, suggestions, or bug reports very welcome!
Ozkan Sezer
Sam Lantinga
Simon McVittie
Ryan C. Gordon
Jay Petacat