Matt Brocklehurst
We've noticed that if you are playing audio on Windows via the WASAPI interface and you unplug and reconnect the device a few times the program hangs.
We've debugged the problem down to
static void
WASAPI_WaitDevice(_THIS)
{
... snip ...
if (WaitForSingleObjectEx(this->hidden->event, INFINITE, FALSE) == WAIT_OBJECT_0) {
... snip ...
}
This WaitForSingleObjectEx does not havbe a time out defined, so it hangs there forever.
Our suggested fix we found was to include a time out of say 200mSec
We have done quite a bit of testing with this fix in place on various hardware configurations and it seems to have resolved the issue.
The Nintendo USB GameCube adapter has four controller ports. Return
the port number as 0 to 3 from SDL_JoystickGetPlayerIndex() and
SDL_JoystickGetDevicePlayerIndex().
Nia Alarie
The NetBSD audio driver has a few problems. Lots of obsolete code, and extremely bad performance and stuttering.
I have a patch in NetBSD's package system to improve it. This is my attempt to upstream it.
The changes include:
* Removing references to defines which are never used.
* Using the correct structures for playback and recording, previously they were the wrong way around.
* Using the correct types ('struct audio_prinfo' in contrast to 'audio_prinfo')
* Removing the use of non-blocking I/O, as suggested in #3177.
* Removing workarounds for driver bugs on systems that don't exist or use this driver any more.
* Removing all usage of SDL_Delay(1)
* Removing pointless use of AUDIO_INITINFO and tests that expect AUDIO_SETINFO to fail when it can't.
These changes bring its performance in line with the DSP audio driver.
bplu4t2f
When num lock is on, the scancode reported for numpad 5 is SDL_SCANCODE_KP_5, which is correct. However, when num lock is off, windows reports the VK_CLEAR virtual key code, which is incorrectly translated into SDL_SCANCODE_CLEAR inside of the VKeytoScancode(WPARAM vkey) function.
Jan Martin Mikkelsen
The evdev interface is available on FreeBSD, with the xf86-input-evdev for include files in /usr/local/include/linux, so <linux/input.h> works, or when build with the native evdev option, where <dev/evdev/input.h> is available.
Jan Martin Mikkelsen
The file src/core/linux/SDL_evdev.c uses the Linux specific types __u32 and __s32. This breaks things on FreeBSD when building with evdev.
Cameron Gutman
I was trying to use SDL_GetQueuedAudioSize() to ensure my audio latency didn't get too high while streaming data in from the network. If I get more than N frames of audio queued, I know that the network is giving me more data than I can play and I need to drop some to keep latency low.
This doesn't work well on WASAPI out of the box, due to the addition of GetPendingBytes() to the amount of queued data. As a terrible hack, I loop 100 times calling SDL_Delay(10) and SDL_GetQueuedAudioSize() before I ever call SDL_QueueAudio() to get a "baseline" amount that I then subtract from SDL_GetQueuedAudioSize() later. However, because this value isn't actually a constant, this hack can cause SDL_GetQueuedAudioSize() - baselineSize to be < 0. This means I have no accurate way of determining how much data is actually queued in SDL's audio buffer queue.
The SDL_GetQueuedAudioSize() documentation says: "This is the number of bytes that have been queued for playback with SDL_QueueAudio(), but have not yet been sent to the hardware." Yet, SDL_GetQueuedAudioSize() returns > 0 value when SDL_QueueAudio() has never been called.
Based on that documentation, I believe the current behavior contradicts the documented behavior of this function and should be changed in line with Boris's patch.
I understand that exposing the IAudioClient::GetCurrentPadding() value is useful, but a solution there needs to take into account what of that data is silence inserted by SDL and what is actual data queued by the user with SDL_QueueAudio(). Until that happens, I think the best approach is to remove the GetPendingBytes() call until SDL is able to keep track of queued data to make sense of it. This would make SDL_GetQueuedAudioSize() possible to use accurately with WASAPI.
In API 28, 0 width views can't take focus, so if someone tries to position the IME without setting a width, they'll stop getting text events.
Tested on Android 9: with a 0 size, it would send correctly letters a, b, c, etc. but not numbers.
Manuel Sabogal
I noticed that the current Android.mk builds a libhidapi.so library for Android but the CMake build hasn't been updated to do so. I'll attach a patch that fixes this issue.
Closing the window is asynchronous, but we free the window data immediately,
so we can get an updateLayer callback before the window is really destroyed which
will cause us to access the freed memory.
Clearing the content view will cause it to be immediately released, so no further
updateLayer callbacks will occur.
Sylvain
Currently SDL_CreateTextureFromSurface picks first valid format, and do a conversion.
format = renderer->info.texture_formats[0];
for (i = 0; i < renderer->info.num_texture_formats; ++i) {
if (!SDL_ISPIXELFORMAT_FOURCC(renderer->info.texture_formats[i]) &&
SDL_ISPIXELFORMAT_ALPHA(renderer->info.texture_formats[i]) == needAlpha) {
format = renderer->info.texture_formats[i];
break;
It could try to find a better format, for instance :
if SDL_Surface has no Amask, but a colorkey :
if surface fmt is RGB888, try to pick ARGB8888 renderer fmt
if surface fmt is BGR888, try to pick ABGR8888 renderer fmt
else
try to pick the same renderer format as surface fmt
if no format has been picked, use the fallback.
I think it goes with bug 4290 fastpath BlitNtoN
when you expand a surface with pixel format of size 24 to 32, there is a fast path possible.
So with this issue:
- if you have a surface with colorkey (RGB or BGR, not palette), it takes a renderer format where the conversion is faster.
(it avoids, if possible, RGB -> ABGR which means switching RGB to BGR)
- if you have a surface ABGR format, it try to take the ABGR from the renderer.
(it avoids, if possible, ABGR -> ARGB, which means switch RGB to BGR)
Thomas Frohwein
Hi,
If a gamepad lists the Dpad as 4 buttons (Dpad Up,Down, Left, Right) like with the Xbox 360 gamepad / XInput report descriptor used by OpenBSD (https://github.com/openbsd/src/blob/master/sys/dev/usb/uhid_rdesc.h#L184), this is not recognized by the SDL BSD backend and no hat or any other listing for the D-pad exists, e.g. in sdl2-jstest (https://gitlab.com/sdl-jstest/sdl-jstest).
The attached diff fixes this and makes the D-pad on my Xbox 360 and Logitech F310 controllers usable. It adds a hat to nhats when usage HUG_DPAD_UP is found, reads the state of the D-pad buttons into array dpad[], and turns the value of dpad[] into an SDL hat direction (dpad_to_sdl()).
Tested and works with Xbox 360 controller and Logitech F310 in XInput mode. Software-side tested with sdl2-jstest and Owlboy where this worked without problems or regressions.
I don't know if this would be applicable to other *BSDs and don't have an install to test it with, therefore wrapped it in __OpenBSD__ ifdefs.
Thanks,
thfr
Removed incorrect call to SDL_SendWindowEvent(window, SDL_WINDOWEVENT_MOVED, x, y);
If the position of the window isn't adjusted in the SetWindowPosition() call, then sending the window event would have no effect because x and y equals the window x and y. If the position of the window is adjusted in the SetWindowPosition() call, then we don't want to clobber it with values that the user passed in.
Sylvain
OpenGLES2 SDL renderer has support for textures ARGB, ABGR, RGB and BGR, whereas OpenGL SDL renderer only had ARGB.
If you think it's worth adding it, here's a patch. I quickly tried and it worked, but there may be missing things or corner case.
Andrei Drexler
For X11 GenericEvents, the associated data is only available between a call to XGetEventData and the matching XFreeEventData, i.e. in X11_HandleGenericEvent. Trying to call XGetEventData a second time on the same event will fail, so an application that wants to inspect XInput2 events (e.g. for stylus pressure) has no way of retrieving its data from queued SYSWM events.
The attached patch (based on SDL-2.0.7-11629) sends SYSWM messages from X11_HandleGenericEvent while the data is still available, allowing client code to register an event filter/watcher and process the event inside the callback.
Vivante drivers use the VK_KHR_display extension for rendering directly
to the frame buffer. This patch adds support to the video driver for
Vulkan rendering using that method.
- Add an utility function SDL_Vulkan_Display_CreateSurface that creates
a surface using this extension. The display to use (if there are
multiple) can be overridden using the environment variable
"SDL_VULKAN_DISPLAY".
- Use this function in a new compilation unit SDL_vivantevideo.c,
which implements the SDL_VIDEO_VULKAN methods of the driver structure.
Dan Ginsburg
I've seen this on several devices including Moto Z running Android 7 and a Snapdragon 845 running Android 9.
What happens is as follows:
SDLActivity.onWindowFocusChanged(true) happens pretty early on, but it's before we've done SDL_CreateWindow and so Android_Window is 0x0 thus this message does not get sent:
JNIEXPORT void JNICALL SDL_JAVA_INTERFACE(nativeFocusChanged)(
JNIEnv *env, jclass cls, jboolean hasFocus)
{
SDL_LockMutex(Android_ActivityMutex);
if (Android_Window) {
__android_log_print(ANDROID_LOG_VERBOSE, "SDL", "nativeFocusChanged()");
SDL_SendWindowEvent(Android_Window, (hasFocus ? SDL_WINDOWEVENT_FOCUS_GAINED : SDL_WINDOWEVENT_FOCUS_LOST), 0, 0);
}
SDL_UnlockMutex(Android_ActivityMutex);
}
When the window does get created, in Android_CreateWindow it does this:
window->flags &= ~SDL_WINDOW_RESIZABLE; /* window is NEVER resizeable */
window->flags &= ~SDL_WINDOW_HIDDEN;
window->flags |= SDL_WINDOW_SHOWN; /* only one window on Android */
window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */
/* One window, it always has focus */
SDL_SetMouseFocus(window);
SDL_SetKeyboardFocus(window);
The SDL_SetKeyboardFocus does send an SDL_WINDOWEVENT_FOCUS_GAINED message, but it gets eaten in SDL_SendWindowEvent because we've forced SDL_WINDOW_INPUT_FOCUS beforehand:
case SDL_WINDOWEVENT_FOCUS_GAINED:
if (window->flags & SDL_WINDOW_INPUT_FOCUS) {
return 0;
}
window->flags |= SDL_WINDOW_INPUT_FOCUS;
SDL_OnWindowFocusGained(window);
break;
I can fix the problem if I comment out this line from Android_CreateWindow:
window->flags |= SDL_WINDOW_INPUT_FOCUS; /* always has input focus */
I would propose that as a fix unless there is a reason not to.
Sam Lantinga
Zack Middleton
Cameron Cawley
Cameron Gutman
Ryan C. Gordon
Alex Szpakowski
Sylvain Becker
Serhii Charykov
Wladimir J. van der Laan
Charlie Birks