Adam M.
When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c:
if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) {
which is effectively saying:
if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) {
As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.
Michael Labb?
NVidia has released some pretty nice Tegra profiling tools for their Android devices. The NVidia Tegra Graphics Debugger works by providing an interposer library that intercepts ES2 and EGL calls. You must link against these libraries.
Unfortunately, this quietly fails with SDL2 because libEGL and libGLES2 are dynamically loaded with dlopen().
NVidia offers a secondary approach to using the Tegra Graphics Debugger: root your device and install a global interposer library. Almost no devs will try this first if they don?t have a rooted device.
I propose an update to the Android readme that explains why the static linking approach recommended by NVidia doesn?t work.
Nitz
In function SDLgfx_rotateSurface:
rz_dst =
SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS,
rz_src->format->Rmask, rz_src->format->Gmask,
rz_src->format->Bmask, rz_src->format->Amask);
Here rz_src get De-referenced without NULL check, which is risky.
Simon Sandstr?m
As stated in Summary. The switch statement will execute the default case and set a SDL error message: "SDL_MixAudio(): unknown audio format".
There are atleast two more problems here:
1. SDL_MixAudioFormat does not notify the user that an error has occured and that a SDL error message was set. It took me awhile to understand why I couldn't mix down the volume on my AUDIO_U16LSB formatted audio stream.. until I started digging in the SDL source code.
2. The error message is incorrect, it should read: "SDL_MixAudioFormat(): unknown audio format".
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
Jan Klass
Not sure if this is limited to the joystick subsystem,
but I created a minimal program for reproducibility,
which is attached.
The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in.
On initialization, the gamepad is being recognized.
After quitting the subsystem, the poll will receive the joystick added event,
which it instantly handles itself, calling SDL_SYS_JoystickDetect again,
which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit).
This seems to lead to an access violation within said function, which I have no source for.
Jan Hellwig
On Windows, you are able to navigate between the buttons on a MessageBox that was created using SDL_ShowMessageBox using the arrow keys. However, if you press the left arrow key, the selection jumps to the button on the right of the currently selected one (and vice versa).
This can be fixed by reversing the order in which the buttons are added to the dialog.
The attached patch files fixes this problem. However the first press of an arrow key leads to the selection of the leftmost or rightmost button on the MessageBox, not to the selection of the button left/right of the one that is selected by default.
Ryochan7
I have been using SDL 2 for a little project that I have been developing for a while. My project is called antimicro and it takes gamepad input and then translates gamepad events into keyboard and mouse events. SDL is used to read the input from an XInput gamepad and it works great for the most part. However, there is one glaring problem that I have encountered.
When a device is unplugged and SDL sends the centered value release events for all axes, buttons, and hats, SDL does not use the proper centered value for the triggers. It pushes an SDL_JOYAXISMOTION event onto the queue with a value of 0 for all axes. That value is converted to around 16,000 for a Game Controller. That value is incorrect for triggers and, in my program, that causes any bindings that are assigned to the triggers to get activated. With most profiles, that will typically mean that a mouse right click and left click will be activated before the device is finally seen as removed and then those bindings are released by antimicro.
Jonas Kulla
At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app.
This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size.
To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).
This tends to be a frequent spot where drivers hang, and the waits were
often unreliable in any case.
Instead, our audio thread now alerts the driver that we're done streaming audio
(which currently XAudio2 uses to alert the system not to warn about the
impending underflow) and then SDL_Delay()'s for a duration that's reasonable
to drain the DMA buffers before closing the device.
This tries to make SDL robust against device drivers that have hung up,
apps don't freeze in catastrophic (but not necessarily uncommon) conditions.
Now we detach the audio thread and let it clean up and don't care if it
never actually runs to completion.
James Zipperer
The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void *handle field to struct SDL_AudioDevice so that I could do the cross reference.
Is there some other way beside adding a void *handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?
James Zipperer
Close the audio device before waiting for the audio thread to complete, which fixes a situation where the audio thread never completes
Add an additional check in the audio thread to see if the device is enabled and bail out if the device is no longer enabled
Joe Thompson
With Direct Input device (MOMO Steering Wheel w/FF)
with SDL 2.0.3,
SDL_HapticOpenFromJoystick() would fail. (Can't set exclusive mode)
Now with 2.0.4 rc1,
SDL_HapticOpenFromJoystick() succeeds but the the returned SDL_Haptic* cannot be used. Calls to SDL_HapticNewEffect() fail with "Haptic error Unable to create effect"
If SDL_HapticOpen() is used instead of HapticOpenFromJoystick(), the device is usable. Calls to HapticNewEffect() succeed with the exact same parameters as the previous failing call.
I have attached a proposed patch for this issue.
When using SDL_HapticOpenFromJoystick(), the original code did not (re)enumerate the axes. This returned a new haptic device with 0 axes. Later, when a new effect is created, SDL_SYS_SetDirection() would set the flags to include DIEFF_SPHERICAL, regardless of what the caller actually set. (see Line 566 in SDL_dinputhaptic.c). This would cause the SDL_HapticNewEffect() to fail (or interpret the coordinates incorreclty.)
The patch moves the call to IDirectInputDevice8_EnumObjects() outside of the if() block so that the axes are (re)enumerated for the new haptic device.
Note: For steering wheels it is common for the joystick to have multiple axes (ie steering, throttle, brake), but the haptic portion of the joystick usually only applies to steering.
Fixes Bugzilla #3441.
"When using internal SDL_vsnprintf(), and source string length is greater
than destination, the final NULL char will be written beyond destination size.
Primary issue that is SDL_strlcpy returns length of source string
(SDL_PrintString()), not how much is written to destination. The destination
ptr is then incremented by this length before the sanity check is done.
Destination string is properly terminated, but an extra NULL char will be
written beyond destination buffer length.
Patch used internally is attached which fixes primary issue with SDL_strlcpy()
in SDL_PrintString() and adjusts sanity checks to increment destination ptr
safely."
Tim McDaniel
Using checkkeys test app:
* Press and hold Caps Lock key.
* checkkeys reports a CapsLock key pressed event and a CapsLock key released event.
* Release Caps Lock key.
* checkkeys reports no further events.
This patch fixes OSX Caps Lock up/down event detection by installing a HID callback.
Ray Molenkamp
When building sdl as shared lib, the version info is lacking in the final binary.
CMake gathers the right resource files into ${VERSION_SOURCES} but then doesn't do anything with them.
Deve
When I'm trying to close on-screen keyboard using SDL_StopTextInput() function by touching the screen (SDL_FINGERUP or SDL_FINGERDOWN event), the screen is flickering. It is white for a while.
Note that it usually works without problems when I use phone's "back" button. I noticed flickering occasionally too, but not that often.
Philipp Wiesemann
The attached patch maybe fixes the flicker but not the actual fault causing it.
Timo Gurr
On cross hosts running autotools for SDL2_gfx-1.0.1 fails to find sdl2.m4:
eautoreconf: running in /var/tmp/paludis/build/media-libs-SDL2_gfx-1.0.1/work/SDL2_gfx-1.0.1 ...
aclocal
aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library
libtoolize --copy --force --automake
aclocal
aclocal-1.13: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:128: warning: macro 'AM_PATH_SDL2' not found in library
autoconf
configure.in:128: error: possibly undefined macro: AM_PATH_SDL2
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
* Failed Running autoconf !
SDL2 installs it to /usr/x86_64-pc-linux-gnu/share/aclocal on cross hosts, attached patch makes use of CMAKE_INSTALL_FULL_DATAROOTDIR to support correctly installing to the arch independent location /usr/share/aclocal.
John Wordsworth
While attempting to integrate CEF (Browser) into an SDL application, we noticed that there were problems on OS X where approximately 50% of the input events were essentially being lost - even when we were using off-screen rendering in CEF and passing through input events manually.
It appears that this problem has been around for a while (see: http://www.magpcss.org/ceforum/viewtopic.php?f=6&t=11141).
Please consider the following patch that fixes this issue. Instead of processing events directly after calling [NSApp nextEventMatchingMask:...] we now pass these events down to NSApp, for processing by an overloaded sendEvent: method. Chromium also forwards events to NSApp in the same way, which means we don't miss events, even if they were originally dequeued by CEF.
Daniel
Seems like check of the visibility of renderer (renderer->hidden) is missing in SDL_RenderCopyEx.
In SDL_RenderCopy it should be done much earlier (after checking support for RenderCopyEx, line 1750).
Sam Lantinga
Ryan C. Gordon
Philipp Wiesemann
David Ludwig
Alex Szpakowski