With earlier changes we've implicitly add the relevant directories
to the includes list, via LOCAL_EXPORT_C_INCLUDES_DIRS.
v2: Update the top Android.mk as well.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Each of the libdrm_${hw} modules pull libdrm for linking as such:
libdrm's LOCAL_EXPORT_C_INCLUDE_DIRS are added to the includes list.
The former of which is already set to ${top} and ${top}/include/drm.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
- Don't add ${hw}/${hw}, but ${hw} to the includes path. The former
does not exist.
- Set the variable for libkms.
Inspired by the work of from Chih-Wei from the Android-x86 project.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
It seems that the tests don't need DRM master anymore? at least make
distcheck passes when X is running.
release.sh is also invoked with just the path to the libdrm git checkout
and we don't want to pass additional arguments that will be treated as
additional modules we want to release.
Also, make a note that release.sh will run make distcheck for you, so we
don't strickly need to run it beforehand.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The main incentive to do this is to get I915_PARAM_REVISION.
v2: Rebase on top of some changes that were made to the header without
copying the whole file from the kernel source.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Update kernel interface with new I915_GETPARAM ioctl entries for
subslice total and EU total. Add a wrapping function for each
parameter. Userspace drivers need these values when constructing
GPGPU commands. This kernel query method is intended to replace
the PCI ID-based tables that userspace drivers currently maintain.
The kernel driver can employ fuse register reads as needed to
ensure the most accurate determination of GT config attributes.
This first became important with Cherryview in which the config
could differ between devices with the same PCI ID.
The kernel detection of these values is device-specific. Userspace
drivers should continue to maintain ID-based tables for older
devices which return ENODEV when using this query.
v2: remove unnecessary include of <stdbool.h> and increment the
I915_GETPARAM indices to match updated kernel patch.
For: VIZ-4636
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The former is a subset of the latter. Error out early so the user is
aware that they are doing something very wrong.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The message "enabled on x86" was meant for the intel libdrm.
Take the opportunity to mention how libkms is autodetected.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Previous code was busted, as it wasn't checking directly for what it was
meant to, and at the end changing the user's selection if host_cpu
heuristics were involved.
Simplify things by adding a macro that does the long message printing
for us, and check for only what we need.
This fixes commit 36cff14bb03(configure: omap, freedreno and tegra
require atomics) which incorrectly assumed that the code was working
fine, and effectively made impossible to enable freedreno due to it's
host_cpu detection.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
AM_MAINTAINER_MODE can be used to disable generation of rebuild rules.
This is not something we want to condone/support, considering it can
cause greater problems than the perceived benefits. Additionally the
Automake manual leans towards avoiding the use of AM_MAINTAINER_MODE.
http://www.gnu.org/software/automake/manual/html_node/maintainer_002dmode.html
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Also add the register field formatting info provided by
Inki Dae <inki.dae@samsung.com>.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Suggested-by: Inki Dae <inki.dae@samsung.com>
The reason for this change is to let userspace use the header.
Currently 'make install' does not install it.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Keeps the code cleaner, since the structs have to be initialized
once anyway.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
[evelikov: squash trivial conflict]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
tests/exynos/exynos_fimg2d_test.c
This is useful when the default repeat mode, which is 'repeat'
produces artifacts at the borders of the copied image.
Choose the 'pad' mode to make use of the color of the destination
image.
In my usage case the destination is the framebuffer, which is
solid filled with a background color. Scaling with 'pad' mode
would then just do the right thing and also produces nice
borders on the output.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
This is a combination of g2d_copy_with_scale and g2d_scale.
It is a pretty common operation to scale one buffer and then
blend it on top of another, so provide a direct way to that
operation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
This makes it easier to spot memory corruptions which don't become
visible when using a plain buffer filled with a solid color (so
corruptions that are just a permutation of the bytes in the buffer).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
With commit d7c0a08bc57(modetest: Allocate dumb buffers with the correct
bpp) we moved away from the libkms dependency. As such we are safe with
including the Makefile/subdir, even as we opt out of building the
library.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Needed on Solaris for the definitions of major() & minor() used in
drmGetNodeTypeFromFd() and makedev() used in drmOpenMinor()
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Only add wrapped bo's and bo's that have been exported through flink or dma-buf.
This avoids a lock in the common case, and decreases traversal needed for importing
a dma-buf or flink.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Tested-By: Emil Velikov <emil.l.velikov@gmail.com>
While I've closed off most races in a previous patch, a small race still existed
where importing then unreffing cound cause an invalid bo. Add a test for this case.
Racing sequence fixed:
- thread 1 releases bo, refcount drops to zero, blocks on acquiring nvdev->lock.
- thread 2 increases refcount to 1.
- thread 2 decreases refcount to zero, blocks on acquiring nvdev->lock.
At this point the 2 threads will clean up the same bo.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Reviewed-By: Emil Velikov <emil.l.velikov@gmail.com>
This sets up the blending equation in the following way:
out = src * src_alpha + dst * (1 - src_alpha)
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
The coefficient mode enables use of global color, not alpha.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
The fimg2d header was defining TRUE and FALSE, but actually
these defines are just used once. Remove them, since they
don't make the code better readable/understandable.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Check for a useable connector and also if the resolution is sane
(width and height are both non-zero).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
In almost all functions the base address register is written, so it
makes sense to have a helper function for this.
v3: Wrap line as pointed out by Emil Velikov
<emil.l.velikov@gmail.com>.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Currently getchar() is used to pause execution after each test.
The user isn't informed if one is supposed to do anything for
the tests to continue, so print a simple message to make this
more clear.
v3: Compactify printf calls as pointed out by
Emil Velikov <emil.l.velikov@gmail.com>.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
v2: Move the commit description into the patch itself.
v3: Use common commenting style as pointed out by
Emil Velikov <emil.l.velikov@gmail.com>.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
This also avoids the floating point conversion steps and just
uses pure integer arithmetic.
Since the G2D hardware scaling approach is a bit unintuitive,
document it in the function as well.
v2: Explicitly mention the normalization constant.
v3: Use common commenting style as pointed out by
Emil Velikov <emil.l.velikov@gmail.com>.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Currently most places assume reliable primary(master) <> render node
mapping. Although this may work in some cases, it is not correct.
Add a couple of helpers that hide the details and provide the name of
the master or render device name, given an fd. The latter may belong to
either the master, control or render node device.
v2:
- Rename Device and Primary to Master (aka the /dev/dri/cardX device).
- Check for the file via readdir_r() rather than stat().
- Wrap the check into a single function.
- Return NULL for non-linux platforms.
v3:
- Don't segfault if name is NULL.
- Update function names, as suggested by Frank Binns.
v4:
- Update commit message to reflect the function name changes.
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Currently the static archive libdrmtest.la links against libdrm.la.
Only to have both added to the executables' LDADD. Simplify things a
bit, by doing the link in the final module (the executables/tests in
this case).
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
None of the subdirs require the modules built in the local makefile, so
moving them at the top makes things a hell lot easier to read.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Mention that freedreno and intel are both auto-detected (depending on
the presence of atomics), plus host_cpu "defined".
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Emil Velikov
Damien Lespiau
Neil Roberts
Jeff McGee
Tobias Jakobi
Jan Vesely
Alan Coopersmith
Maarten Lankhorst