5ce8aaae72
Large changes for fbdev support.
...
Change from DIRECTCOLOR to TRUECOLOR, and enable
support for PSEUDOCOLOR. DIRECTCOLOR support needs more work.
Add the ability to change the mode on the fbdev device.
Support depth 8, 15, 16 and 24 (and 32).
Add a /dev/fbX device per CRTC, but there's some code which
doesn't allocate the fbX device unless the output is actually
enabled. Read the code on this as it impacts the fbcon map flags.
Pick CRTC's based on the available outputs. More work could
be done here to match modes, so cloning could be achieved on
outputs. This fits more inline with what the X code does.
2007-05-17 12:46:36 +01:00
eba00df120
Just some minor cleanups.
2007-05-10 13:16:05 +01:00
45e09ea3cf
Cleaned up userspace interface for modesetting.
2007-05-05 16:08:27 +02:00
3a69e2484a
cleanup usermodes on drm mode setting shutdown
2007-05-01 14:20:22 +10:00
89231953d1
Add support for user defined modes
...
This allows userspace to specify modes and add them to the modesetting
system and attach modes to outputs
2007-05-01 13:16:29 +10:00
8e8e37515e
fix unusued variable
2007-05-01 13:15:41 +10:00
b589b846e7
Merge branch 'origin' into modesetting-101
2007-04-26 15:56:21 +10:00
34be91fe4e
i915: fix vblank pipe setup
2007-04-26 14:50:00 +10:00
5c8561aae2
More detailed instructions, tips.
2007-04-25 14:52:29 -06:00
61477d60c4
nouveau: fix wacky pci id
2007-04-23 22:37:36 +02:00
ceb44021ad
drm: make mode numbers no change by comparing probed modes
...
The mode list sets all the output modes to UNVERIFIED, then probes a new list,
If a mode is on the new list and not on the old, it adds it to the old,
if a mode is on the new list and old, it just updates the status to the new
mode status.
If a mode is on the old list and not on the new, prune invalid modes should
remove all UNVERIFIED modes
2007-04-23 11:42:29 +10:00
0f3c5148f0
fixup vrefresh reporting, it should now be *1000 in userspace
2007-04-23 09:10:46 +10:00
97b5599982
Oops, edid data should just be a char *, as edid.h is private to edid.c
...
(we can just recombine them now).
2007-04-20 18:00:44 -07:00
eb892fb09d
Add a monitor information structure separate from the EDID data for tracking
...
monitor limits, etc.
2007-04-20 17:59:30 -07:00
a21ff375c6
Document drm_modes.c functions.
2007-04-20 17:03:50 -07:00
9ca4932054
Add a mode name generation wrapper to make name format changes easier.
2007-04-20 16:32:58 -07:00
2d1de1fc6b
Initialize rwlock using rwlock_init to appease lockdep validator.
2007-04-20 18:12:18 -04:00
af3ffcd822
Initialize rwlock using rwlock_init to appease lockdep validator.
2007-04-20 18:06:31 -04:00
6238ebee21
Clean up and return if no outputs are found.
2007-04-20 16:52:04 -04:00
a8a8108e45
Avoid a fence timeout problem when a signal is pending.
2007-04-20 15:57:41 +02:00
1ce9c09231
Fix via compile error
...
(Reported by Benno Schulenberg.)
2007-04-20 15:49:31 +02:00
8d893e49ec
backout SDVO control bus check and comment why this is a bad idea
2007-04-19 09:43:46 +10:00
5587961cfe
Document main drm_crtc.c functions, and rename drm_crtc_mode_create to
...
drm_mode_create to be consistent with the other functions. Also document
where we need locking fixes and what the locks are for.
2007-04-18 11:49:42 -07:00
2df2c70e20
Simplify the ttm backend interface and the agp ttm backend.
2007-04-18 16:33:28 +02:00
dfc02547ff
Shouldn't free the mode here. It's done later on.
2007-04-18 14:18:56 +01:00
b642ced083
Fix return status
2007-04-18 13:52:46 +01:00
0207b51acc
Fix build problem
2007-04-18 12:19:16 +01:00
87b46bd436
free the duplicated mode.
2007-04-18 12:10:06 +01:00
191594ebd5
When no valid EDID modes are available, we bail.
...
This snippet adds a standard 640x480 @ 60Hz mode when
that occurs, so we can continue with a basic mode.
Should we do this here though ???
2007-04-18 12:07:55 +01:00
ef2bce3a16
Merge remote branch 'origin/modesetting-101' into modesetting-101
2007-04-18 11:55:09 +01:00
51e867c578
Support the RGB outputs of SDVO cards, which are essentially
...
VGA outs.
The drm_initial_config path has specific handling code to name
match for VGA, TMDS or LVDS. This is pretty restrictive and should
probably be dealt with to be more generic.
2007-04-18 11:53:25 +01:00
ea8bcb466b
Check status after SDVO command for sdvo_set_control_bus_switch
2007-04-18 11:47:21 +01:00
dc03e07f23
Move SDVO PENDING check to read_response so all SDVO commands
...
benefit from the spin loop.
2007-04-18 11:46:04 +01:00
20b2949e37
make sure TMDS gets a crtc
2007-04-18 14:55:43 +10:00
e46e028bd2
Merge branch 'origin' into modesetting-101
...
Conflicts:
linux-core/drm_bo.c
Merge in changes from master from Thomas fixiing TTM problems
2007-04-18 14:11:49 +10:00
c71c44bb92
Merge branch 'modesetting-101' of git+ssh://git.freedesktop.org/git/mesa/drm into origin/modesetting-101
2007-04-17 18:20:05 -07:00
4f0841a31c
Just use drm_output_destroy to cleanup LVDS failures. It'll call our cleanup
...
routine, which will take care of freeing our dev_priv and i2c ddc bus.
2007-04-17 18:03:14 -07:00
d20aaf4858
don't crash if no desired mode
2007-04-18 10:41:39 +10:00
2352ec9bfa
backout alanh's broken commit
2007-04-18 10:39:58 +10:00
7c9e19ba55
clean up ring buffer and TTM in i915_driver_unload
...
I've commented out the framebuffer for now
2007-04-18 10:39:27 +10:00
73b031df61
Add framebuffer bo freeing to drm_mode_config_cleanup (seems like the best
...
place for now).
2007-04-17 17:30:46 -07:00
a45fa264f2
Lvds now power up backlight on commit
...
Now saves previous power level in prepare and sets
that power level in commit, should power level
be 0 it will set maximum level.
2007-04-17 22:27:46 +02:00
1c7f895fa6
Merge branch 'modesetting-101' of git+ssh://git.freedesktop.org/git/mesa/drm into origin/modesetting-101
...
Conflicts:
shared-core/i915_init.c - reconcile with airlied's new code
2007-04-17 10:14:18 -07:00
4e4d9cbeb3
Move initial framebuffer allocation and configuration to drm_initial_config,
...
remove i915_driver_load fb related stuff. Add a small helper for setting up
outputs.
2007-04-17 10:00:37 -07:00
eeb5de0594
Cleanup whitespace, rename macro argument.
2007-04-17 09:59:21 -07:00
5e6c345396
Add prototypes for drm_bo_init_mm and drm_buffer_object_create for use by
...
in-kernel code.
2007-04-17 09:57:08 -07:00
b729b919ba
Fix a register read that was swapped SDVOB/SDVOC
...
Check for the PENDING message when reading the attached
displays. Ensures the command has completed before continuing.
(probably need to check PENDING in other SDVO calls too)
2007-04-17 16:11:00 +01:00
ecd9801c3c
Fix SDVO outputs
2007-04-17 16:09:40 +01:00
32b5616cc6
Correct PCI ID for i845
2007-04-17 16:08:26 +01:00
5a96d59ce9
Don't always free up memory space when we unpin buffers.
2007-04-17 14:15:37 +02:00
root
Alan Hourihane
Jakob Bornecrantz
Dave Airlie
Brian
Stephane Marchesin
Jesse Barnes
Kristian Høgsberg
Thomas Hellstrom
Dave Airlie
David Airlie