Add a new API that allows the caller to skip any forced probing, which
may require slow i2c to a remote display, and only report the currently
active mode and encoder for a Connector. This is often the information
of interest and is much, much faster than re-retrieving the link status
and EDIDs, e.g. if the caller only wishes to count the number of active
outputs.
v2: Fix error path to avoid double free after a failed GETCONNECTOR
ioctl.
v3: Daniel strongly disapproved of my disjoint in behaviour between
GetConnector and GetConnectorCurrent, and considering how best to make a
drop in replacement for drmmode_output_init() convinced me keeping the
API as consistent as possible was the right approach.
v4: Avoid probing on the second calls to GETCONNECTOR for unconnected
outputs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: David Herrmann <dh.herrmann@googlemail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Unfortunately, there are some users of libdrm installed headers that like
to be built with -std=c89 -pedantic, which does not like "inline".
However, __inline works.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The valies are unsigned long, thus we should use %lu.
v2: Drop old printf statement. (Jan)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
... and remove the useless SL_DEBUG and RANDOM_DEBUG
v2: Rebase on earlier changes.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
... and wire it up to make check
v2: s/rand - state->check/rand != state->check/. (Jan)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
With follow up commits we can clear it up and wire to
make check
v2:
- Use xf86drmRandom.h for common struct.(Jan)
- Add test to .gitignore.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
... and wire up to `make check' now that it's useful.
v2: Really return non-zero on failure.
v3: Initialise ret.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu> (v2)
v2: Rebase on earlier changes. Keep count initialisation as is.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Get the test from completely broken to working like a charm.
- Use the same variable type for both HashInsert and HashLookup.
- Use correct storage type for the HashLookup return value.
- Remove useless backward iteration of HashLookup(i).
v2:
- Use void * instead of unsigned long.
- Change value to key << 16 | key.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
This way with follow up commits we can fix it and wire it up to
make check
v2:
- Use xf86drmHash.h for common structs.(Jan)
- Add test to .gitignore.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
v2: merge tests creation and xf86drmSL cleanup
rename tests/drmsltest -> tests/drmsl
move the test out of libudev test block
v3: run test even on noudev builds
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Commit e4a519635f75bde38aeb5b09f2ff4efbf73453e9:
Tidy up compile warnings by cleaning up types.
removed call to SLLocate which gutted the function of all functionality.
This patch restores the original behavior, with an additional fix
that zeros the update array in case SLLocate bails early.
v2: zero the update array instead of checking the return value.
SLLocate returns NULL both on failure and if the element is greater
than everything in the list
v3: Improve commit message
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Both android-x86 and android-ia versions of libpciacccess correctly
"export" the include. If anyone else is wrapping up their own version
they should do so as well.
Remove this fixed location hack from the build.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chih-Wei Huang <cwhuang@linux.org.tw>
v2: Remove the handler function instead of commenting out
split debugmsg function removal to a separate patch
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
There is a rockchip drm kms driver.
Add "rockchip" to the static lists of driver names in the the standard
set of tests.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
[Emil Velikov: Resolve trivial conflicts.]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
--enable-install-test-programs allows tests to be installed in $bindir.
This is disabled by default, but very useful when cross compiling.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use android build system functions to include Android.mk
of subdirs.
Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
[Emil Velikov: Resolve trivial conflicts.]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
With earlier changes we've implicitly add the relevant directories
to the includes list, via LOCAL_EXPORT_C_INCLUDES_DIRS.
v2: Update the top Android.mk as well.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Each of the libdrm_${hw} modules pull libdrm for linking as such:
libdrm's LOCAL_EXPORT_C_INCLUDE_DIRS are added to the includes list.
The former of which is already set to ${top} and ${top}/include/drm.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
- Don't add ${hw}/${hw}, but ${hw} to the includes path. The former
does not exist.
- Set the variable for libkms.
Inspired by the work of from Chih-Wei from the Android-x86 project.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
It seems that the tests don't need DRM master anymore? at least make
distcheck passes when X is running.
release.sh is also invoked with just the path to the libdrm git checkout
and we don't want to pass additional arguments that will be treated as
additional modules we want to release.
Also, make a note that release.sh will run make distcheck for you, so we
don't strickly need to run it beforehand.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The main incentive to do this is to get I915_PARAM_REVISION.
v2: Rebase on top of some changes that were made to the header without
copying the whole file from the kernel source.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Update kernel interface with new I915_GETPARAM ioctl entries for
subslice total and EU total. Add a wrapping function for each
parameter. Userspace drivers need these values when constructing
GPGPU commands. This kernel query method is intended to replace
the PCI ID-based tables that userspace drivers currently maintain.
The kernel driver can employ fuse register reads as needed to
ensure the most accurate determination of GT config attributes.
This first became important with Cherryview in which the config
could differ between devices with the same PCI ID.
The kernel detection of these values is device-specific. Userspace
drivers should continue to maintain ID-based tables for older
devices which return ENODEV when using this query.
v2: remove unnecessary include of <stdbool.h> and increment the
I915_GETPARAM indices to match updated kernel patch.
For: VIZ-4636
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
The former is a subset of the latter. Error out early so the user is
aware that they are doing something very wrong.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
The message "enabled on x86" was meant for the intel libdrm.
Take the opportunity to mention how libkms is autodetected.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Previous code was busted, as it wasn't checking directly for what it was
meant to, and at the end changing the user's selection if host_cpu
heuristics were involved.
Simplify things by adding a macro that does the long message printing
for us, and check for only what we need.
This fixes commit 36cff14bb03(configure: omap, freedreno and tegra
require atomics) which incorrectly assumed that the code was working
fine, and effectively made impossible to enable freedreno due to it's
host_cpu detection.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
AM_MAINTAINER_MODE can be used to disable generation of rebuild rules.
This is not something we want to condone/support, considering it can
cause greater problems than the perceived benefits. Additionally the
Automake manual leans towards avoiding the use of AM_MAINTAINER_MODE.
http://www.gnu.org/software/automake/manual/html_node/maintainer_002dmode.html
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Also add the register field formatting info provided by
Inki Dae <inki.dae@samsung.com>.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Suggested-by: Inki Dae <inki.dae@samsung.com>
The reason for this change is to let userspace use the header.
Currently 'make install' does not install it.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Keeps the code cleaner, since the structs have to be initialized
once anyway.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
[evelikov: squash trivial conflict]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
tests/exynos/exynos_fimg2d_test.c
This is useful when the default repeat mode, which is 'repeat'
produces artifacts at the borders of the copied image.
Choose the 'pad' mode to make use of the color of the destination
image.
In my usage case the destination is the framebuffer, which is
solid filled with a background color. Scaling with 'pad' mode
would then just do the right thing and also produces nice
borders on the output.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
This is a combination of g2d_copy_with_scale and g2d_scale.
It is a pretty common operation to scale one buffer and then
blend it on top of another, so provide a direct way to that
operation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
This makes it easier to spot memory corruptions which don't become
visible when using a plain buffer filled with a solid color (so
corruptions that are just a permutation of the bytes in the buffer).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
With commit d7c0a08bc57(modetest: Allocate dumb buffers with the correct
bpp) we moved away from the libkms dependency. As such we are safe with
including the Makefile/subdir, even as we opt out of building the
library.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Chris Wilson
Chih-Wei Huang
Daniel Kurtz
Connor Behan
Emil Velikov
Jan Vesely
Chih-Wei Huang
Damien Lespiau
Neil Roberts
Jeff McGee
Tobias Jakobi