Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Arcturus decode test support only
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx pipeline(CPG), cases below is not suitable:
- Command submission Test (GFX)
- Command submission Test (Multi-Fence)
- Sync dependency Test
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx engine, add function to blacklist gfx related test.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables drm_intel_bufmgr on DG1 and allows us to pass dmabuf
import/export related tests with Piglit.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Missing RKL PCI ID preventing below test cases to succeed on RKL Platform.
igt@kms_frontbuffer_tracking
igt@kms_draw-crc
igt@kms_big_fb
Signed-off-by: sunil kumar dora sermsity <sunilx.kumar.dora.sermsity@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two new patches landed in kernel adding new PCI ids:
123f62de419f ("drm/i915/rkl: Add RKL platform info and PCI ids")
52797a8e8529 ("drm/i915/ehl: Add new PCI ids")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
This is workaround of firmware issue, and the change has no impact
on the legacy HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
It is not used for VCN from VCN1, but VCN3 use it
for other feature, so clear it, because we don't
use the feature for now
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
VCN3.0 has its own set of internal regs
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
./xf86drm.c: In function 'drmNodeIsDRM':
../xf86drm.c:2825:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmGetMinorNameForFD':
../xf86drm.c:2938:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmParsePciBusInfo':
../xf86drm.c:3258:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmParsePciDeviceInfo':
../xf86drm.c:3427:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmGetDeviceNameFromFd2':
../xf86drm.c:4305:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
This option finds all connected connector and then sets its preferred
mode on it. If no preferred mode is available, first mode is used.
This option must be set w/o any mode or plane.
This allows for a quick test on all connected outputs.
Loosely based on the work by Ezequiel Garcia <ezequiel@collabora.com>
Changes since Ezequiel's work:
- implement atomic codepath
- set all connectors
- pick correct crtc
- don't set -r by default
- nearly identical output in atomic and non-atomic codepaths
v2:
- Use the crtc->crtc_id, instead of the plane's current crtc_id
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code a tiny bit more symmetrical.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The very final drmModeAtommicCommit tears down the existing mode/plane
setup. Following it we clean up other misc state laying around.
Chances are that it will not fail, but in the extremely unlikely case it
does, there's nothing one can do.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the hunk of code into a function, making the overall flow easier to
follow and providing some symmetry to the non-atomic path.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The function is closely related to pipe_find_crtc_and_mode() so we might
as well keep them together.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the function above set_mode, since we'll be using it from there as
of next commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Instead of duplicating the exact same code across the two functions,
fold them into one.
For some strange reason git diff may show atomic_clear_mode() as changed
The function in untouched, despite the misleading output.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code shorter and easier to read.
Currently if the user has not set the crtc_id, we fetch the crtc yet do
not "bother" setting the id - do so.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Let's make the code shorter, this avoid crashes (when drmModeGetCrtc()
fails) by using a couple of helpers. As get_resources() considers the
drmModeGetCrtc() fail non-fatal, we might as well handle it properly.
v2: Add a comment above the unreachable abort() (Eze)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
There's no point in keeping these around since we already fetch the
complete data set. Add respective count_ variables and greatly simplify
the existing code.
Extra brownie points for:
- using the inverse order in free_resources()
- don't memory leak the connector properties
- free the properties themselves, instead of only the objects
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Flesh out the bo_create + drmModeAddFB2 dance into a helper and use it.
Currently we're duplicating that in 4 places, many of which leaking et
al.
As a bonus point this highlights that the atomic_set_plane() seems tad
buggy. That'll be fixed with separate commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Don't bother opening the device node, if the args combination is invalid
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The two functions have been stubs for ages. The alluded generic ioctls
never came to be, assumingly because all new drivers support those.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Freedreno uses VALGRIND_ENABLE_ADDR_ERROR_REPORTING_IN_RANGE that was
introduced in Valgrind 3.10.0
Raspbian Buster includes Valgrind 3.7.0, so when valgrind is installed
as freedreno is build by default the build becomes broken. So lets
require 3.10 to enable valgrind when freedreno is built.
v2: Keep the arguments listed in the same order (Emil Velikov)
Closes: https://gitlab.freedesktop.org/mesa/drm/-/issues/37
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Since we now always returns the /dev/dri/ node for
drmGet<nodetype>DeviceNameFromFd, be consistant with the names returned
in drmGetDeviceNameFromFd.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Fix the FreeBSD variant by getting the node type represented by fd to deduce
the target minor name.
We then return the full /dev/dri/<minorname><id> version.
Fix: #41
Fixes: 6818a50b12
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
This is similar to b81d44d587d1706d5c7568e539340632a748782b: the
DRM_RDWR flag is needed for mmap to work.
Signed-off-by: Nicholas Bishop <nicholasbishop@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The sed was incorrectly modifying e.g. "nicholasbishop" to
"nicholasbop". The updated pattern will only match `.sh` at the end of
the string.
Signed-off-by: Nicholas Bishop <nicholasbishop@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Renoir is the same family as Raven, but it's with VCN2.0,
so it has to use VCN2.0 reg set
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-By: Thong Thai <thong.thai@amd.com>
Currently the code expects that the device found at
/sys/char/$maj:$min/device for USB devices is a "usb_device". However,
at least for some devices, such as for the udl driver, they are instead
a "usb_interface".
A usb_interface is a child of the usb_device we're interested in, so we
walk up one in the /sys path to get there.
For example, with a USB device I have, trimmed to show the relevant
information:
```
$ udevadm info /dev/dri/card1
P: /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-4/1-4:1.0/drm/card1
E: DEVTYPE=drm_minor
$ udevadm info /sys/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-4/1-4:1.0
E: DEVTYPE=usb_interface
E: DRIVER=udl
$ udevadm info /sys/devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-4
E: DEVTYPE=usb_device
E: DRIVER=usb
E: BUSNUM=001
E: DEVNUM=009
```
Signed-off-by: Scott Anderson <scott@anderso.nz>
This fixes bug in drmParseSubsystemType() that cases situation when
subsequent call to readlink() from get_subsystem_type() will result in
EACCESS.
Signed-off-by: Mikhail Golubev <mikhail.golubev@opensynergy.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Alex Deucher alexander.deucher@amd.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Just like the other tests (tools really) install drmdevice. It is a
simple tool which is useful for basic check/testing.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
FreeBSD also use (int, unsigned long int, ...) like GLIBC.
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Le Ma
James Zhu
Alex Deucher
Tapani Pälli
sitanliu
Adam Miszczak
Jeremy Cline
sunil kumar dora sermsity
Pavan Kumar Ramayanam
José Roberto de Souza
Leo Liu
Heiko Thiery
Eric Engestrom
Dave Airlie
Emil Velikov
Emil Velikov
Jose Maria Casanova Crespo
Karol Herbst
Boram Park
Emmanuel Vadot
Nicholas Bishop
Scott Anderson
Mikhail Golubev
Peter Seiderer