Now it returns an array and optional count, to match other SDL3 APIs.
SDL_GetTouchName() was replaced with a function that takes an instance ID
instead of an index, too.
This uses the same `SDL_VerbNoun` format as the rest of SDL3, and also
adds stronger effort to invalidate cached state in the backend, so cooperation
improves with apps that are using lowlevel rendering APIs directly.
Fixes#367.
This gives applications and binding systems a clearer view of what the hardware is so they can make intelligent decisions about how to present things to the user.
Gamepad mappings continue to use abxy for the face buttons for simplicity and compatibility with earlier versions of SDL, however the "SDL_GAMECONTROLLER_USE_BUTTON_LABELS" hint no longer has any effect.
Fixes https://github.com/libsdl-org/SDL/issues/6117
Almost nothing checks these return values, and there's no reason a valid
lock should fail to operate. The cases where a lock isn't valid (it's a
bogus pointer, it was previously destroyed, a thread is unlocking a lock it
doesn't own, etc) are undefined behavior and always were, and should be
treated as an application bug.
Reference Issue #8096.
The following objects now have properties that can be user modified:
* SDL_AudioStream
* SDL_Gamepad
* SDL_Joystick
* SDL_RWops
* SDL_Renderer
* SDL_Sensor
* SDL_Surface
* SDL_Texture
* SDL_Window
This is meant to offer a simplified API for people that are either migrating
directly from SDL2 with minimal effort or just want to make noise without
any of the fancy new API features.
Users of this API can just deal with a single SDL_AudioStream as their only
object/handle into the audio subsystem.
They are still allowed to open multiple devices (or open the same device
multiple times), but cannot change stream bindings on logical devices opened
through this function.
Destroying the single audio stream will also close the logical device behind
the scenes.
The sequence order of the four paddles is not obvious, with SDL and Xbox
controllers swapping the order of P2 and P3 relative to each other.
If we group them into left and right, then it becomes more obvious.
Signed-off-by: Simon McVittie <smcv@collabora.com>
The current status is stored in the SDL_rwops 'status' field to be able to determine whether a 0 return value is caused by end of file, an error, or a non-blocking source not being ready.
The functions to read sized datatypes now return SDL_bool so you can detect read errors.
Fixes https://github.com/libsdl-org/SDL/issues/6729
This rips up the entire SDL audio subsystem! While we still feed the audio device from a separate thread, the audio callback into the app is now gone a totally optional alternative.
Now the app will bind an SDL_AudioStream to a given device and feed data to it. As many streams as one likes can be bound to a device; SDL will mix them all into a single buffer and feed the device from there.
So not only does this function as a basic mixer, it also means that multiple device opens are handled seamlessly (so if you want to open the device for your game, but you also link to a library that provides VoIP and it wants to open the device separately, you don't have to worry about stepping on each other, or that the OS will fail to allow multiple opens of the same device, etc).
Merged from pull request #7704.
Fixes#7379.
Reference Issue #6889.
Reference Issue #6632.
Render targets are a core feature of SDL 3.0, so this flag has been removed.
The OpenGL ES renderer still doesn't support them, but we'll deal with that later.
Fixes https://github.com/libsdl-org/SDL/issues/8059
Also renamed most cases of SDL_GAMEPAD_TYPE_UNKNOWN to SDL_GAMEPAD_TYPE_STANDARD, and SDL_GetGamepadType() will return SDL_GAMEPAD_TYPE_UNKNOWN only if the gamepad is invalid.
Removing SDL_GAMEPAD_TYPE_VIRTUAL allows a virtual controller to emulate another gamepad type. The other controller types can be treated as generic controllers by applications without special glyph or functionality treatment.
Also renamed SDL_GetDisplayOrientation() SDL_GetDisplayCurrentOrientation()
The natural orientation of the primary display is the frame of reference for accelerometer and gyro sensor readings.
Consolidate the X11_WMCLASS and WAYLAND_WMCLASS envvars into one SDL_HINT_APP_ID hint. This hint serves the same purpose on both windowing systems to allow desktop compositors to identify and group windows together, as well as associate applications with their desktop settings and icons.
The common code for retrieving the value is now consolidated under core/unix/SDL_appid.c as it's common to *nix platforms, and the value is now retrieved at window creation time instead of being cached by the video driver at startup so that changes to the hint after video initialization and before window creation will be seen, as well as to accommodate cases where applications want to use different values for different windows.
We have gotten feedback that abstracting the coordinate system based on the display scale is unexpected and it is difficult to adapt existing applications to the proposed API.
The new approach is to provide the coordinate systems that people expect, but provide additional information that will help applications properly handle high DPI situations.
The concepts needed for high DPI support are documented in README-highdpi.md. An example of automatically adapting the content to display scale changes can be found in SDL_test_common.c, where auto_scale_content is checked.
Also, the SDL_WINDOW_ALLOW_HIGHDPI window flag has been replaced by the SDL_HINT_VIDEO_ENABLE_HIGH_PIXEL_DENSITY hint.
Fixes https://github.com/libsdl-org/SDL/issues/7709
It turns out that screen coordinates were confusing people, thinking that meant pixels, when instead they are virtual coordinates; device independent units defined as pixels scaled by the display scale. We'll use the term "points" for this going forward, to reduce confusion.
- SDL_AudioCVT is gone, even internally.
- libsamplerate is gone (I suspect our resampler is finally Good Enough).
- Cleanups and improvements to audio conversion interfaces.
- SDL_AudioStream can change its input/output format/rate/channels on the fly!
It turns out there's a race condition on X11 where the window could be placed by the window manager while being placed by the application, so we need to have the initial position available at window creation.
This function wasn't consistently correct across platforms and devices.
If you want the UI scale factor, you can use display_scale in the structure returned by SDL_GetDesktopDisplayMode(). If you need an approximate DPI, you can multiply this value times 160 on iPhone and Android, and 96 on other platforms.
This makes it clear what the new versions are, and in the case of SDL_RenderDrawPoint() and SDL_RenderDrawLine(), the coccinelle script actually does the (float) casts for you.
This fixes rounding errors with coordinate scaling and gives more flexibility in the presentation, as well as making it easy to maintain device independent resolution as windows move between different pixel density displays.
By default when a renderer is created, it will match the window size so window coordinates and render coordinates are 1-1.
Mouse and touch events are no longer filtered to change their coordinates, instead you can call SDL_ConvertEventToRenderCoordinates() to explicitly map event coordinates into the rendering viewport.
SDL_RenderWindowToLogical() and SDL_RenderLogicalToWindow() have been renamed SDL_RenderCoordinatesFromWindow() and SDL_RenderCoordinatesToWindow() and take floating point coordinates in both directions.
The viewport, clipping state, and scale for render targets are now persistent and will remain set whenever they are active.
Rather than iterating over display modes using an index, there is a new function SDL_GetFullscreenDisplayModes() to get the list of available fullscreen modes on a display.
{
SDL_DisplayID display = SDL_GetPrimaryDisplay();
int num_modes = 0;
SDL_DisplayMode **modes = SDL_GetFullscreenDisplayModes(display, &num_modes);
if (modes) {
for (i = 0; i < num_modes; ++i) {
SDL_DisplayMode *mode = modes[i];
SDL_Log("Display %" SDL_PRIu32 " mode %d: %dx%d@%gHz, %d%% scale\n",
display, i, mode->pixel_w, mode->pixel_h, mode->refresh_rate, (int)(mode->display_scale * 100.0f));
}
SDL_free(modes);
}
}
SDL_GetDesktopDisplayMode() and SDL_GetCurrentDisplayMode() return pointers to display modes rather than filling in application memory.
Windows now have an explicit fullscreen mode that is set, using SDL_SetWindowFullscreenMode(). The fullscreen mode for a window can be queried with SDL_GetWindowFullscreenMode(), which returns a pointer to the mode, or NULL if the window will be fullscreen desktop. SDL_SetWindowFullscreen() just takes a boolean value, setting the correct fullscreen state based on the selected mode.
SDL_DisplayMode now includes the pixel size, the screen size and the relationship between the two. For example, a 4K display at 200% scale could have a pixel size of 3840x2160, a screen size of 1920x1080, and a display scale of 2.0.
This fixes the clang warning "Cast between pointer-to-function and pointer-to-object is an extension"
You can define SDL_FUNCTION_POINTER_IS_VOID_POINTER in your project to restore the previous behavior.
Fixes https://github.com/libsdl-org/SDL/issues/2866
You can enable and disable subsystems with SDL_ENABLE_SYSWM_*/SDL_DISABLE_SYSWM_* and you can disable the type forward declarations with SDL_DISABLE_SYSWM_*_TYPES
This simplifies the API and removes a level of API translation between the int variants of the functions and the float implementation
Fixes https://github.com/libsdl-org/SDL/issues/6656
Also cleaned up logic for whether we need to poll for events:
- We need to periodically poll for joysticks to handle hotplug.
- We need to frequently poll for joysticks and sensors when they're open so their state can be updated
Feedback from @icculus:
"IsTablet" uses "is" as a form of "to be" ...like, the actual question is of its nature.
The rest is just a superfluous word in the question and it flows as better English with if (RectEmpty) than if (IsRectEmpty)
Fixes https://github.com/libsdl-org/SDL/issues/6932
`SDL_QUERY`, `SDL_IGNORE`, `SDL_ENABLE`, and `SDL_DISABLE` have been removed.
SDL_EventState() has been replaced with SDL_SetEventEnabled()
SDL_GetEventState() has been replaced with SDL_EventEnabled()
SDL_GameControllerEventState has been replaced with SDL_SetGamepadEventsEnabled() and SDL_GamepadEventsEnabled()
SDL_JoystickEventState has been replaced with SDL_SetJoystickEventsEnabled() and SDL_JoystickEventsEnabled()
SDL_ShowCursor() has been split into three functions: SDL_ShowCursor(), SDL_HideCursor(), and SDL_CursorVisible()
Fixes https://github.com/libsdl-org/SDL/issues/6929
Instead of indexing into an internal list of devices which requires locking, we return a list of device IDs which can then be queried individually.
Reference: https://github.com/libsdl-org/SDL/issues/6889
Ryan C. Gordon
Sam Lantinga
Simon McVittie
Sylvain
Frank Praznik
Brick
Eric
David Demelier
SDL Wiki Bot
Anonymous Maarten
Bruno Sanches
Sasha Szpakowski
Ozkan Sezer