Matteo Beniamino
Pressing a trigger button on a Steam Controller causes a segmentation fault both with stable version and latest mercurial head on Linux. I'm using the recent hid_steam kernel module with lizard_mode disabled (that is no keyboard/mouse emulation). I suspect this is what's happening: the driver exposes two hats. The two hats have indices 0 and 2. Inside linux/SDL_sysjoystick.c two hats are allocated in allocate_hatdata for joystick->hwdata->hats. In HandleHat function the hat parameter (that can be 2) is directly used as the index of the array that only has two elements, causing an out of bounds access. SDL is not expecting to have "holes" between hats indices.
The index 2 is calculated in HandleInputEvents() as (ABS_HAT2X - ABS_HAT0X) / 2 where ABS_HAT2X is the value associated to the hat inside the hid_steam module.
Jan Martin Mikkelsen
The attached patch adds support for single-touch evdev devices.
These devices report ABS_X, ABS_Y and BTN_TOUCH events. This patch sets them up as MT devices with a single slot and handles the appropriate messages.
This was to deal with broken vsync support in macOS 10.14, which we assumed
would remain broken indefinitely, but a later 10.14 released fixed it.
This is a loss of late-swap support, but there are several subtle problems
in our CVDiplayLink code that are also evaporating, to be fair.
Fixes Bugzilla #4575.
(Backed out changeset 8760fed23001)
Dzmitry Malyshau
Current code, search paths, and error messages are written to only consider MoltenVK on macOS as a Vulkan Portability implementation. It's not the only implementation available to the users. gfx-portability [1] has been shown to run a number of titles well, including Dota2, Dolphin Emulator, and vkQuake3, often out-performing MoltenVK in frame rate and stability (see Dolphin benchmark [2]).
There is no reason for SDL to be that specific, it's not using any MVK-specific functions other than the WSI initialization ("VK_MVK_macos_surface"). gfx-portability exposes this extension as well, and a more generic WSI extension is in process. It would be good if SDL was written in a more generic way that expect a Vulkan Portability library as opposed to MoltenVK specifically.
[1] https://github.com/gfx-rs/portability
[2] https://gfx-rs.github.io/2019/03/22/dolphin-macos-performance.html
This device is a copy of the Xbox Controller S and currently the one most sold
when shopping for a 'new' Xbox gamepad on eBay and AliExpress.
Except for the quirky USB ID id behaves just like a normal Xbox controller (when
ignoring the subpar build quality)
LinGao
We build SDL with Visual studio 2017 compiler on Windows Server 2016, but it failed to build due to error LNK2019: unresolved external symbol _memset referenced in function _IMA_ADPCM_Decode on latest default branch. And we found that it can be first reproduced on ca7283111ad0 changeset. Could you please help have a look about this issue? Thanks in advance!
Caleb Cornett
On iOS 12, creating a window with the SDL_WINDOW_FULLSCREEN flag does not dim the home indicator or defer system gestures. The same goes for setting the SDL_HINT_IOS_HIDE_HOME_INDICATOR to "2" -- it has no effect at all.
I've tracked down the source of this misbehavior to a timing issue. The initial `setNeedsUpdate...` calls were happening too early and getting applied to the launch screen by mistake. In the attached patch, I've added a call to those functions right after the launch screen is hidden so that they apply to the main view controller instead. This appears to fix the issue, at least on my iPhone 6s Plus.
Simon Hug
Attached is a minor cleanup patch. It changes the option name of one hint to something better, puts one or two more checks in, and adds explicit casting where warnings could appear otherwise.
I hope the naming of the hints and their options is acceptable. It would be kind of awkward to change them after they get released with an official SDL version.
Simon Hug
I had a look at this and made some additions to SDL_wave.c.
The attached patch adds many checks and error messages. For some reason I also added A-law and ?-law decoders. Forgot exactly why... but hey, they're small.
The WAVE format is seriously underspecified (at least by the documents that are publicly available on the internet) and it's a shame Microsoft never put something better out there. The language used in them is so loose at times, it's not surprising the encoders and decoders behave very differently. The Windows Media Player doesn't even support MS ADPCM correctly.
The patch also adds some hints to make the decoder more strict at the cost of compatibility with weird WAVE files.
I still think it needs a bit of cleaning up (Not happy with the MultiplySize function. Don't like the name and other SDL code may want to use something like this too.) and some duplicated code may be folded together. It does work in this state and I have thrown all kinds of WAVE files at it. The AFL files also pass with it and some even play (obviously just noise). Crafty little fuzzer.
Any critique would be welcome. I have a fork of SDL with a audio-loadwav branch over here if someone wants to use the commenting feature of Bitbucket:
https://bitbucket.org/ChliHug/SDL
I also cobbled some Lua scripts together to create WAVE test files:
https://bitbucket.org/ChliHug/gendat
Sylvain
On Android, if you set no attribute using SDL_GL_SetAttribute(), and try to create a SDL Render OpenGLES 1:
- it loads first by default GLESv2 libraries
- creates the rendere OpenGLES 1
- recreates the Window to have a context 1.1 ( https://hg.libsdl.org/SDL/file/4db4cfd59470/src/render/opengles/SDL_render_gles.c#l298 )
But it doesn't unload libraries, then reload GLESv1 lib. So the SDL_Renderer OpenGLES 1 is working with GLES 2 libs, which seems inconsistent.
If you, at first, set
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK, SDL_GL_CONTEXT_PROFILE_ES);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MAJOR_VERSION, 1);
SDL_GL_SetAttribute(SDL_GL_CONTEXT_MINOR_VERSION, 1);
It will correctly load GLES v1 libraries.
Here's a small patch to reload egl libs when SDL_RecreateWindow() is called.
It fixes the issue, also the case from bug 4042
( SDL_RecreateWindow() is used by SDL_Renderer gl, gles1, gles2. )
Ozkan Sezer
A horde of strict aliasing violation warnings are emitted from joystick
layer, and also from a few other places. This happens with gcc-4.4.7 on
Linux CentOS 6.10. Some other sysjoystick would possibly have the same
warnings.
Attached my full log here. Example entry:
src/joystick/SDL_joystick.c: In function 'SDL_GetJoystickGUIDInfo':
src/joystick/SDL_joystick.c:1094: warning: dereferencing pointer '({anonymous})' does break strict-aliasing rules
janisozaur
There are many cases which are not able to be handled by SDL's audio conversion routines, including too low (negative) rate, too high rate (impossible to allocate).
This patch aims to report such issues early and handle others in a graceful manner. The "INT32_MAX / RESAMPLER_SAMPLES_PER_ZERO_CROSSING" value is the conservative approach in terms of what can _technically_ be supported, but its value is 4'194'303, or just shy of 4.2MHz. I highly doubt any sane person would use such rates, especially in SDL2, so I would like to drive this limit further down, but would need some assistance to do that, as doing so would have to introduce an arbitrary value. Are you OK with such approach? What would a good value be? Wikipedia (https://en.wikipedia.org/wiki/High-resolution_audio) lists 96kHz as the highest sampling rate in use, even if I quadruple it for a good measure, to 384kHz it's still an order of magnitude lower than 4MHz.
If IMA ADPCM format chunk was too short, InitIMA_ADPCM() parsing it
could read past the end of chunk data. This patch fixes it.
CVE-2019-7578
https://bugzilla.libsdl.org/show_bug.cgi?id=4494
Signed-off-by: Petr P?sa? <ppisar@redhat.com>
ace
I got this bug in SDL_ttf:
https://bugzilla.libsdl.org/show_bug.cgi?id=4524
Sylvain proposed solution:
SDL_RWseek(RWops, 0, RW_SEEK_SET);
And it works, but i can use it my project, because it written in C# with SDL2-CS wrapper and there not export for macroses:
#define SDL_RWsize(ctx) (ctx)->size(ctx)
#define SDL_RWseek(ctx, offset, whence) (ctx)->seek(ctx, offset, whence)
#define SDL_RWtell(ctx) (ctx)->seek(ctx, 0, RW_SEEK_CUR)
#define SDL_RWread(ctx, ptr, size, n) (ctx)->read(ctx, ptr, size, n)
#define SDL_RWwrite(ctx, ptr, size, n) (ctx)->write(ctx, ptr, size, n)
#define SDL_RWclose(ctx) (ctx)->close(ctx)
Therefore, I suggest replacing this macros with functions so that they can be exported and used in bindings
This device is a copy of the Xbox Controller S and currently the one most sold
when shopping for a 'new' Xbox gamepad on eBay and AliExpress.
Except for the quirky USB ID id behaves just like a normal Xbox controller (when
ignoring the subpar build quality)
Noam Preil
In src/joystick/linux/SDL_sysjoystick.c:
The ConfigJoystick function's axes detection starts with a for loop using an index i for Linux's axes names. When i gets to ABS_HAT0X, it's set to ABS_HAT3Y and a continue statement appears, to skip the hats. This makes sense, as SDL handles hats separately from axes.
However, in PollAllValues, *two* indices are used: a and b. Both start out the same, and remain so until the hats are reached. At that point, a becomes identical to the i from ConfigJoystick's loop, but b is equal to a - (ABS_HAT3Y - ABS_HAT0X), or a - 8.
While all the joystick->hwdata->abs_* structures in ConfigJoystick used i - which would here be a - as both the index and the ioctl argument, PollAllValues uses b for the structure index and a as the ioctl argument.
It would appear, however, that no joystick HAS such axes, and that the b index is entirely unnecessary.
I tested three separate joysticks, and while that was far from a complete listing, I was unable to find a joystick with an axis above 0x08.
tschwinger
Respect the BUILD_SHARED_LIBS variable when defined, and build either shared or static libs, which is CMake's default behavior (See https://cmake.org/cmake/help/latest/variable/BUILD_SHARED_LIBS.html).
If the variable is not defined, the current behavior remains unchanged and both variants are built where the platform supports it. This way, it remains possible to build both in one shot, which seems convenient for distro builds and useful to promote some consistency between them.
tschwinger
Followup to #3651
As already noted by Ryan, no framework is being built, so we better install to lib/cmake.
That code was originally part of a patch submitted by David Demelier, whose credit BTW got lost (I combined his patch for #3572 with fixes for #2576 and #3613 resulting in #3651 because things started to depend on another).
I tested that the configuration files are found correctly in the new location on MacOS X based on a hint to the root (see https://cmake.org/cmake/help/latest/command/find_package.html#search-procedure).
Dexter Friedman
When using a Dualshock 4 controller (model numbers CUH-ZCT1U and CUH-ZCT2U), pressing anywhere on the center touchpad does not send an SDL_JOYBUTTONDOWN event. I have verified this with testjoystick:
Repro steps:
1. Plug in a DS4 over USB
2. Compile testjoystick and run: testjoystick.exe 0
3. Press and hold the touchpad. Observe that no lime green box appears
Expected behavior:
A lime green box appears while the touchpad is pressed.
Notes:
I've attached a patch here that works on my PC and produces the expected behavior in testjoystick, for both DS4 model numbers I listed earlier.
If I understand correctly, by exposing this as a joystick button, the gamecontroller API mapping can be modified with a change to gamecontrollerdb.txt in the future.
Sam Lantinga
Sebastian Krzyszkowiak
Ozkan Sezer
Sylvain Becker
Ryan C. Gordon
Benjamin Valentin
Ethan Lee