drm/shared-core/mga_dma.c

1217 lines
30 KiB
C
Raw Normal View History

2000-02-22 08:43:59 -07:00
/* mga_dma.c -- DMA support for mga g200/g400 -*- linux-c -*-
* Created: Mon Dec 13 01:50:01 1999 by jhartmann@precisioninsight.com
*
* Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
2000-06-08 08:38:22 -06:00
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
2000-02-22 08:43:59 -07:00
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
2000-09-06 14:56:34 -06:00
*
2000-02-22 08:43:59 -07:00
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
2000-09-06 14:56:34 -06:00
*
2000-02-22 08:43:59 -07:00
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
*/
/**
* \file mga_dma.c
* DMA support for MGA G200 / G400.
*
* \author Rickard E. (Rik) Faith <faith@valinux.com>
* \author Jeff Hartmann <jhartmann@valinux.com>
* \author Keith Whitwell <keith@tungstengraphics.com>
* \author Gareth Hughes <gareth@valinux.com>
2000-02-22 08:43:59 -07:00
*/
#include "drmP.h"
2002-04-09 15:54:56 -06:00
#include "drm.h"
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
#include "drm_sarea.h"
2002-04-09 15:54:56 -06:00
#include "mga_drm.h"
2000-02-22 08:43:59 -07:00
#include "mga_drv.h"
2001-02-15 01:12:14 -07:00
#define MGA_DEFAULT_USEC_TIMEOUT 10000
#define MGA_FREELIST_DEBUG 0
2000-02-22 08:43:59 -07:00
static int mga_do_cleanup_dma(drm_device_t * dev);
2001-02-15 01:12:14 -07:00
/* ================================================================
* Engine control
*/
2000-02-22 08:43:59 -07:00
int mga_do_wait_for_idle(drm_mga_private_t * dev_priv)
2000-04-04 16:08:14 -06:00
{
2001-02-15 01:12:14 -07:00
u32 status = 0;
int i;
DRM_DEBUG("\n");
2000-09-06 14:56:34 -06:00
for (i = 0; i < dev_priv->usec_timeout; i++) {
status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK;
if (status == MGA_ENDPRDMASTS) {
MGA_WRITE8(MGA_CRTC_INDEX, 0);
return 0;
}
DRM_UDELAY(1);
2000-04-04 16:08:14 -06:00
}
2000-09-06 14:56:34 -06:00
#if MGA_DMA_DEBUG
DRM_ERROR("failed!\n");
DRM_INFO(" status=0x%08x\n", status);
#endif
2002-07-05 02:31:11 -06:00
return DRM_ERR(EBUSY);
2000-04-04 16:08:14 -06:00
}
static int mga_do_dma_reset(drm_mga_private_t * dev_priv)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
2000-02-22 08:43:59 -07:00
DRM_DEBUG("\n");
2000-04-04 16:08:14 -06:00
2001-02-15 01:12:14 -07:00
/* The primary DMA stream should look like new right about now.
*/
primary->tail = 0;
primary->space = primary->size;
primary->last_flush = 0;
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
sarea_priv->last_wrap = 0;
2000-02-22 08:43:59 -07:00
2001-02-15 01:12:14 -07:00
/* FIXME: Reset counters, buffer ages etc...
*/
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
/* FIXME: What else do we need to reinitialize? WARP stuff?
*/
return 0;
2000-04-04 16:08:14 -06:00
}
2000-02-22 08:43:59 -07:00
2001-02-15 01:12:14 -07:00
/* ================================================================
* Primary DMA stream
*/
void mga_do_dma_flush(drm_mga_private_t * dev_priv)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
u32 head, tail;
2002-10-10 02:25:40 -06:00
u32 status = 0;
int i;
DMA_LOCALS;
DRM_DEBUG("\n");
/* We need to wait so that we can do an safe flush */
for (i = 0; i < dev_priv->usec_timeout; i++) {
status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK;
if (status == MGA_ENDPRDMASTS)
break;
DRM_UDELAY(1);
2002-10-10 02:25:40 -06:00
}
if (primary->tail == primary->last_flush) {
DRM_DEBUG(" bailing out...\n");
2001-02-15 01:12:14 -07:00
return;
}
2001-02-15 01:12:14 -07:00
tail = primary->tail + dev_priv->primary->offset;
2000-02-22 08:43:59 -07:00
2001-02-15 01:12:14 -07:00
/* We need to pad the stream between flushes, as the card
* actually (partially?) reads the first of these commands.
* See page 4-16 in the G400 manual, middle of the page or so.
*/
BEGIN_DMA(1);
2001-02-15 01:12:14 -07:00
DMA_BLOCK(MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000, MGA_DMAPAD, 0x00000000);
2001-02-15 01:12:14 -07:00
ADVANCE_DMA();
primary->last_flush = primary->tail;
head = MGA_READ(MGA_PRIMADDRESS);
2001-02-15 01:12:14 -07:00
if (head <= tail) {
2001-02-15 01:12:14 -07:00
primary->space = primary->size - primary->tail;
2000-02-22 08:43:59 -07:00
} else {
2001-02-15 01:12:14 -07:00
primary->space = head - tail;
2000-04-04 16:08:14 -06:00
}
2000-09-06 14:56:34 -06:00
DRM_DEBUG(" head = 0x%06lx\n", head - dev_priv->primary->offset);
DRM_DEBUG(" tail = 0x%06lx\n", tail - dev_priv->primary->offset);
DRM_DEBUG(" space = 0x%06x\n", primary->space);
2001-02-15 01:12:14 -07:00
mga_flush_write_combine();
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
2001-02-15 01:12:14 -07:00
DRM_DEBUG("done.\n");
2000-02-22 08:43:59 -07:00
}
void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
u32 head, tail;
DMA_LOCALS;
DRM_DEBUG("\n");
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
BEGIN_DMA_WRAP();
2000-09-06 14:56:34 -06:00
DMA_BLOCK(MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000, MGA_DMAPAD, 0x00000000);
2000-02-22 08:43:59 -07:00
2001-02-15 01:12:14 -07:00
ADVANCE_DMA();
tail = primary->tail + dev_priv->primary->offset;
primary->tail = 0;
primary->last_flush = 0;
primary->last_wrap++;
head = MGA_READ(MGA_PRIMADDRESS);
2001-02-15 01:12:14 -07:00
if (head == dev_priv->primary->offset) {
2001-02-15 01:12:14 -07:00
primary->space = primary->size;
2000-02-22 08:43:59 -07:00
} else {
2001-02-15 01:12:14 -07:00
primary->space = head - dev_priv->primary->offset;
2000-02-22 08:43:59 -07:00
}
DRM_DEBUG(" head = 0x%06lx\n", head - dev_priv->primary->offset);
DRM_DEBUG(" tail = 0x%06x\n", primary->tail);
DRM_DEBUG(" wrap = %d\n", primary->last_wrap);
DRM_DEBUG(" space = 0x%06x\n", primary->space);
2001-02-15 01:12:14 -07:00
mga_flush_write_combine();
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
2001-02-15 01:12:14 -07:00
set_bit(0, &primary->wrapped);
DRM_DEBUG("done.\n");
2000-02-22 08:43:59 -07:00
}
void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv)
2000-02-22 08:43:59 -07:00
{
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
2001-02-15 01:12:14 -07:00
drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
u32 head = dev_priv->primary->offset;
DRM_DEBUG("\n");
2001-02-15 01:12:14 -07:00
sarea_priv->last_wrap++;
DRM_DEBUG(" wrap = %d\n", sarea_priv->last_wrap);
2001-02-15 01:12:14 -07:00
mga_flush_write_combine();
MGA_WRITE(MGA_PRIMADDRESS, head | MGA_DMA_GENERAL);
clear_bit(0, &primary->wrapped);
DRM_DEBUG("done.\n");
2001-02-15 01:12:14 -07:00
}
2000-02-22 08:43:59 -07:00
2001-02-15 01:12:14 -07:00
/* ================================================================
* Freelist management
*/
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
#define MGA_BUFFER_USED ~0
#define MGA_BUFFER_FREE 0
2000-02-22 08:43:59 -07:00
#if MGA_FREELIST_DEBUG
static void mga_freelist_print(drm_device_t * dev)
2001-02-15 01:12:14 -07:00
{
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_freelist_t *entry;
2000-02-22 08:43:59 -07:00
DRM_INFO("\n");
DRM_INFO("current dispatch: last=0x%x done=0x%x\n",
dev_priv->sarea_priv->last_dispatch,
(unsigned int)(MGA_READ(MGA_PRIMADDRESS) -
dev_priv->primary->offset));
DRM_INFO("current freelist:\n");
for (entry = dev_priv->head->next; entry; entry = entry->next) {
DRM_INFO(" %p idx=%2d age=0x%x 0x%06lx\n",
entry, entry->buf->idx, entry->age.head,
entry->age.head - dev_priv->primary->offset);
2001-02-15 01:12:14 -07:00
}
DRM_INFO("\n");
2000-02-22 08:43:59 -07:00
}
#endif
2000-02-22 08:43:59 -07:00
static int mga_freelist_init(drm_device_t * dev, drm_mga_private_t * dev_priv)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_device_dma_t *dma = dev->dma;
drm_buf_t *buf;
drm_mga_buf_priv_t *buf_priv;
drm_mga_freelist_t *entry;
int i;
DRM_DEBUG("count=%d\n", dma->buf_count);
2000-09-06 14:56:34 -06:00
dev_priv->head = drm_alloc(sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
if (dev_priv->head == NULL)
2002-07-05 02:31:11 -06:00
return DRM_ERR(ENOMEM);
2000-09-06 14:56:34 -06:00
memset(dev_priv->head, 0, sizeof(drm_mga_freelist_t));
SET_AGE(&dev_priv->head->age, MGA_BUFFER_USED, 0);
2000-02-22 08:43:59 -07:00
for (i = 0; i < dma->buf_count; i++) {
2001-02-15 01:12:14 -07:00
buf = dma->buflist[i];
buf_priv = buf->dev_private;
2000-09-06 14:56:34 -06:00
entry = drm_alloc(sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
if (entry == NULL)
2002-07-05 02:31:11 -06:00
return DRM_ERR(ENOMEM);
2000-02-22 08:43:59 -07:00
memset(entry, 0, sizeof(drm_mga_freelist_t));
2001-02-15 01:12:14 -07:00
entry->next = dev_priv->head->next;
entry->prev = dev_priv->head;
SET_AGE(&entry->age, MGA_BUFFER_FREE, 0);
2001-02-15 01:12:14 -07:00
entry->buf = buf;
if (dev_priv->head->next != NULL)
2001-02-15 01:12:14 -07:00
dev_priv->head->next->prev = entry;
if (entry->next == NULL)
2001-02-15 01:12:14 -07:00
dev_priv->tail = entry;
buf_priv->list_entry = entry;
buf_priv->discard = 0;
buf_priv->dispatched = 0;
2000-04-04 16:08:14 -06:00
2001-02-15 01:12:14 -07:00
dev_priv->head->next = entry;
}
2001-02-15 01:12:14 -07:00
return 0;
2000-02-22 08:43:59 -07:00
}
static void mga_freelist_cleanup(drm_device_t * dev)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_freelist_t *entry;
drm_mga_freelist_t *next;
DRM_DEBUG("\n");
2001-02-15 01:12:14 -07:00
entry = dev_priv->head;
while (entry) {
2001-02-15 01:12:14 -07:00
next = entry->next;
drm_free(entry, sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
2001-02-15 01:12:14 -07:00
entry = next;
}
dev_priv->head = dev_priv->tail = NULL;
2000-02-22 08:43:59 -07:00
}
#if 0
/* FIXME: Still needed?
*/
static void mga_freelist_reset(drm_device_t * dev)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_device_dma_t *dma = dev->dma;
drm_buf_t *buf;
drm_mga_buf_priv_t *buf_priv;
int i;
for (i = 0; i < dma->buf_count; i++) {
2001-02-15 01:12:14 -07:00
buf = dma->buflist[i];
buf_priv = buf->dev_private;
SET_AGE(&buf_priv->list_entry->age, MGA_BUFFER_FREE, 0);
2001-02-15 01:12:14 -07:00
}
2000-02-22 08:43:59 -07:00
}
#endif
2000-02-22 08:43:59 -07:00
static drm_buf_t *mga_freelist_get(drm_device_t * dev)
2000-02-22 08:43:59 -07:00
{
2001-02-15 01:12:14 -07:00
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_freelist_t *next;
drm_mga_freelist_t *prev;
drm_mga_freelist_t *tail = dev_priv->tail;
u32 head, wrap;
DRM_DEBUG("\n");
2000-09-06 14:56:34 -06:00
head = MGA_READ(MGA_PRIMADDRESS);
2001-02-15 01:12:14 -07:00
wrap = dev_priv->sarea_priv->last_wrap;
DRM_DEBUG(" tail=0x%06lx %d\n",
tail->age.head ?
tail->age.head - dev_priv->primary->offset : 0,
tail->age.wrap);
DRM_DEBUG(" head=0x%06lx %d\n",
head - dev_priv->primary->offset, wrap);
2000-02-22 08:43:59 -07:00
if (TEST_AGE(&tail->age, head, wrap)) {
2001-02-15 01:12:14 -07:00
prev = dev_priv->tail->prev;
next = dev_priv->tail;
prev->next = NULL;
next->prev = next->next = NULL;
dev_priv->tail = prev;
SET_AGE(&next->age, MGA_BUFFER_USED, 0);
2001-02-15 01:12:14 -07:00
return next->buf;
}
2000-04-04 16:08:14 -06:00
DRM_DEBUG("returning NULL!\n");
2001-02-15 01:12:14 -07:00
return NULL;
}
2000-04-04 16:08:14 -06:00
int mga_freelist_put(drm_device_t * dev, drm_buf_t * buf)
2001-02-15 01:12:14 -07:00
{
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_buf_priv_t *buf_priv = buf->dev_private;
2001-03-12 11:18:06 -07:00
drm_mga_freelist_t *head, *entry, *prev;
2001-02-15 01:12:14 -07:00
DRM_DEBUG("age=0x%06lx wrap=%d\n",
buf_priv->list_entry->age.head -
dev_priv->primary->offset, buf_priv->list_entry->age.wrap);
2001-02-15 01:12:14 -07:00
2001-03-12 11:18:06 -07:00
entry = buf_priv->list_entry;
2001-02-15 01:12:14 -07:00
head = dev_priv->head;
if (buf_priv->list_entry->age.head == MGA_BUFFER_USED) {
SET_AGE(&entry->age, MGA_BUFFER_FREE, 0);
2001-03-12 11:18:06 -07:00
prev = dev_priv->tail;
prev->next = entry;
entry->prev = prev;
entry->next = NULL;
} else {
prev = head->next;
head->next = entry;
prev->prev = entry;
entry->prev = head;
entry->next = prev;
}
2000-04-04 16:08:14 -06:00
return 0;
}
2001-02-15 01:12:14 -07:00
/* ================================================================
* DMA initialization, cleanup
*/
int mga_driver_preinit(drm_device_t *dev, unsigned long flags)
2001-02-15 01:12:14 -07:00
{
drm_mga_private_t * dev_priv;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
2002-07-05 02:31:11 -06:00
return DRM_ERR(ENOMEM);
2000-04-04 16:08:14 -06:00
dev->dev_private = (void *)dev_priv;
memset(dev_priv, 0, sizeof(drm_mga_private_t));
2000-04-04 16:08:14 -06:00
2001-02-15 01:12:14 -07:00
dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
dev_priv->chipset = flags;
return 0;
}
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
/**
* Bootstrap the driver for AGP DMA.
*
* \todo
* Investigate whether there is any benifit to storing the WARP microcode in
* AGP memory. If not, the microcode may as well always be put in PCI
* memory.
*
* \todo
* This routine needs to set dma_bs->agp_mode to the mode actually configured
* in the hardware. Looking just at the Linux AGP driver code, I don't see
* an easy way to determine this.
*
* \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
*/
static int mga_do_agp_dma_bootstrap(drm_device_t * dev,
drm_mga_dma_bootstrap_t * dma_bs)
{
drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
int err;
unsigned offset;
const unsigned secondary_size = dma_bs->secondary_bin_count
* dma_bs->secondary_bin_size;
const unsigned agp_size = (dma_bs->agp_size << 20);
drm_buf_desc_t req;
drm_agp_mode_t mode;
drm_agp_info_t info;
/* Acquire AGP. */
err = drm_agp_acquire(dev);
if (err) {
DRM_ERROR("Unable to acquire AGP\n");
return err;
}
err = drm_agp_info(dev, &info);
if (err) {
DRM_ERROR("Unable to get AGP info\n");
return err;
}
mode.mode = (info.mode & ~0x07) | dma_bs->agp_mode;
err = drm_agp_enable(dev, mode);
if (err) {
DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
return err;
}
/* In addition to the usual AGP mode configuration, the G200 AGP cards
* need to have the AGP mode "manually" set.
*/
if (dev_priv->chipset == MGA_CARD_TYPE_G200) {
if (mode.mode & 0x02) {
MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE);
}
else {
MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE);
}
}
/* Allocate and bind AGP memory. */
dev_priv->agp_pages = agp_size / PAGE_SIZE;
dev_priv->agp_mem = drm_alloc_agp( dev, dev_priv->agp_pages, 0 );
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
if (dev_priv->agp_mem == NULL) {
dev_priv->agp_pages = 0;
DRM_ERROR("Unable to allocate %uMB AGP memory\n",
dma_bs->agp_size);
return DRM_ERR(ENOMEM);
}
err = drm_bind_agp( dev_priv->agp_mem, 0 );
if (err) {
DRM_ERROR("Unable to bind AGP memory\n");
return err;
}
offset = 0;
err = drm_addmap( dev, offset, warp_size,
_DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp );
if (err) {
DRM_ERROR("Unable to map WARP microcode\n");
return err;
}
offset += warp_size;
err = drm_addmap( dev, offset, dma_bs->primary_size,
_DRM_AGP, _DRM_READ_ONLY, & dev_priv->primary );
if (err) {
DRM_ERROR("Unable to map primary DMA region\n");
return err;
}
offset += dma_bs->primary_size;
err = drm_addmap( dev, offset, secondary_size,
_DRM_AGP, 0, & dev->agp_buffer_map );
if (err) {
DRM_ERROR("Unable to map secondary DMA region\n");
return err;
}
(void) memset( &req, 0, sizeof(req) );
req.count = dma_bs->secondary_bin_count;
req.size = dma_bs->secondary_bin_size;
req.flags = _DRM_AGP_BUFFER;
req.agp_start = offset;
err = drm_addbufs_agp( dev, & req );
if (err) {
DRM_ERROR("Unable to add secondary DMA buffers\n");
return err;
}
offset += secondary_size;
err = drm_addmap( dev, offset, agp_size - offset,
_DRM_AGP, 0, & dev_priv->agp_textures );
if (err) {
DRM_ERROR("Unable to map AGP texture region\n");
return err;
}
drm_core_ioremap(dev_priv->warp, dev);
drm_core_ioremap(dev_priv->primary, dev);
drm_core_ioremap(dev->agp_buffer_map, dev);
if (!dev_priv->warp->handle ||
!dev_priv->primary->handle || !dev->agp_buffer_map->handle) {
DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n",
dev_priv->warp->handle, dev_priv->primary->handle,
dev->agp_buffer_map->handle);
return DRM_ERR(ENOMEM);
}
dev_priv->dma_access = MGA_PAGPXFER;
dev_priv->wagp_enable = MGA_WAGP_ENABLE;
DRM_INFO("Initialized card for AGP DMA.\n");
return 0;
}
/**
* Create a "fake" drm_map_t for a pre-mapped range of PCI consistent memory.
*
* Unlike \c drm_addmap, this function just creates a \c drm_map_t wrapper for
* a block of PCI consistent memory. \c drm_addmap, basically, converts a bus
* address to a virtual address. However, \c drm_pci_alloc gives both the bus
* address and the virtual address for the memory region. Not only is there
* no need to map it again, but mapping it again will cause problems.
*
* \param dmah DRM DMA handle returned by \c drm_pci_alloc.
* \param map_ptr Location to store a pointer to the \c drm_map_t.
*
* \returns
* On success, zero is returned. Otherwise and error code suitable for
* returning from an ioctl is returned.
*/
static int mga_fake_addmap(drm_dma_handle_t * dmah, drm_map_t ** map_ptr)
{
drm_map_t * map;
map = drm_alloc(sizeof(drm_map_t), DRM_MEM_DRIVER);
if (map == NULL) {
return DRM_ERR(ENOMEM);
}
map->offset = dmah->busaddr;
map->size = dmah->size;
map->type = _DRM_CONSISTENT;
map->flags = _DRM_READ_ONLY;
map->handle = dmah->vaddr;
map->mtrr = 0;
*map_ptr = map;
return 0;
}
/**
* Bootstrap the driver for PCI DMA.
*
* \todo
* The algorithm for decreasing the size of the primary DMA buffer could be
* better. The size should be rounded up to the nearest page size, then
* decrease the request size by a single page each pass through the loop.
*
* \todo
* Determine whether the maximum address passed to drm_pci_alloc is correct.
* The same goes for drm_addbufs_pci.
*
* \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
*/
static int mga_do_pci_dma_bootstrap(drm_device_t * dev,
drm_mga_dma_bootstrap_t * dma_bs)
{
drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
unsigned int primary_size;
unsigned int bin_count;
int err;
drm_buf_desc_t req;
if (dev->dma == NULL) {
DRM_ERROR("dev->dma is NULL\n");
return DRM_ERR(EFAULT);
}
/* The WARP microcode base address must be 256-byte aligned.
*/
dev_priv->warp_dmah = drm_pci_alloc(dev, warp_size, 0x100, 0x7fffffff);
err = mga_fake_addmap(dev_priv->warp_dmah, & dev_priv->warp);
if (err) {
DRM_ERROR("Unable to map WARP microcode\n");
return err;
}
/* Other than the bottom two bits being used to encode other
* information, there don't appear to be any restrictions on the
* alignment of the primary or secondary DMA buffers.
*/
dev_priv->primary_dmah = NULL;
for ( primary_size = dma_bs->primary_size
; primary_size != 0
; primary_size >>= 1 ) {
dev_priv->primary_dmah = drm_pci_alloc(dev, primary_size,
0x04, 0x7fffffff);
if (dev_priv->primary_dmah != NULL) {
break;
}
}
if (dev_priv->primary_dmah == NULL) {
DRM_ERROR("Unable to allocate primary DMA region\n");
return DRM_ERR(ENOMEM);
}
if (dev_priv->primary_dmah->size != dma_bs->primary_size) {
DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n",
dma_bs->primary_size,
(unsigned) dev_priv->primary_dmah->size);
dma_bs->primary_size = dev_priv->primary_dmah->size;
}
err = mga_fake_addmap(dev_priv->primary_dmah, & dev_priv->primary);
if (err) {
DRM_ERROR("Unable to map primary DMA region\n");
return err;
}
for ( bin_count = dma_bs->secondary_bin_count
; bin_count > 0
; bin_count-- ) {
(void) memset( &req, 0, sizeof(req) );
req.count = bin_count;
req.size = dma_bs->secondary_bin_size;
err = drm_addbufs_pci( dev, & req );
if (!err) {
break;
}
}
if (bin_count == 0) {
DRM_ERROR("Unable to add secondary DMA buffers\n");
return err;
}
if (bin_count != dma_bs->secondary_bin_count) {
DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u "
"to %u.\n", dma_bs->secondary_bin_count, bin_count);
dma_bs->secondary_bin_count = bin_count;
}
dev_priv->dma_access = 0;
dev_priv->wagp_enable = 0;
dma_bs->agp_mode = 0;
DRM_INFO("Initialized card for PCI DMA.\n");
return 0;
}
static int mga_do_dma_bootstrap(drm_device_t * dev,
drm_mga_dma_bootstrap_t * dma_bs)
{
const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev);
int err;
drm_mga_private_t * const dev_priv =
(drm_mga_private_t *) dev->dev_private;
dev_priv->used_new_dma_init = 1;
/* The first steps are the same for both PCI and AGP based DMA. Map
* the cards MMIO registers and map a status page.
*/
err = drm_addmap( dev, dev_priv->mmio_base, dev_priv->mmio_size,
_DRM_REGISTERS, _DRM_READ_ONLY, & dev_priv->mmio );
if (err) {
DRM_ERROR("Unable to map MMIO region\n");
return err;
}
err = drm_addmap( dev, 0, SAREA_MAX, _DRM_SHM,
_DRM_READ_ONLY | _DRM_LOCKED | _DRM_KERNEL,
& dev_priv->status );
if (err) {
DRM_ERROR("Unable to map status region\n");
return err;
}
/* The DMA initialization procedure is slightly different for PCI and
* AGP cards. AGP cards just allocate a large block of AGP memory and
* carve off portions of it for internal uses. The remaining memory
* is returned to user-mode to be used for AGP textures.
*/
if (is_agp) {
err = mga_do_agp_dma_bootstrap(dev, dma_bs);
}
/* If we attempted to initialize the card for AGP DMA but failed,
* clean-up any mess that may have been created.
*/
if (err) {
mga_do_cleanup_dma(dev);
}
/* Not only do we want to try and initialized PCI cards for PCI DMA,
* but we also try to initialized AGP cards that could not be
* initialized for AGP DMA. This covers the case where we have an AGP
* card in a system with an unsupported AGP chipset. In that case the
* card will be detected as AGP, but we won't be able to allocate any
* AGP memory, etc.
*/
if (!is_agp || err) {
err = mga_do_pci_dma_bootstrap(dev, dma_bs);
}
return err;
}
int mga_dma_bootstrap(DRM_IOCTL_ARGS)
{
DRM_DEVICE;
drm_mga_dma_bootstrap_t bootstrap;
int err;
DRM_COPY_FROM_USER_IOCTL(bootstrap,
(drm_mga_dma_bootstrap_t __user *) data,
sizeof(bootstrap));
err = mga_do_dma_bootstrap(dev, & bootstrap);
if (! err) {
static const int modes[] = { 0, 1, 2, 2, 4, 4, 4, 4 };
const drm_mga_private_t * const dev_priv =
(drm_mga_private_t *) dev->dev_private;
if (dev_priv->agp_textures != NULL) {
bootstrap.texture_handle = dev_priv->agp_textures->offset;
bootstrap.texture_size = dev_priv->agp_textures->size;
}
else {
bootstrap.texture_handle = 0;
bootstrap.texture_size = 0;
}
bootstrap.agp_mode = modes[ bootstrap.agp_mode & 0x07 ];
if (DRM_COPY_TO_USER( (void __user *) data, & bootstrap,
sizeof(bootstrap))) {
err = DRM_ERR(EFAULT);
}
}
else {
mga_do_cleanup_dma(dev);
}
return err;
}
static int mga_do_init_dma(drm_device_t * dev, drm_mga_init_t * init)
{
drm_mga_private_t *dev_priv;
int ret;
DRM_DEBUG("\n");
dev_priv = dev->dev_private;
2001-02-15 01:12:14 -07:00
if (init->sgram) {
2001-02-15 01:12:14 -07:00
dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK;
} else {
dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR;
2000-02-22 08:43:59 -07:00
}
dev_priv->maccess = init->maccess;
2000-09-06 14:56:34 -06:00
dev_priv->fb_cpp = init->fb_cpp;
dev_priv->front_offset = init->front_offset;
dev_priv->front_pitch = init->front_pitch;
dev_priv->back_offset = init->back_offset;
dev_priv->back_pitch = init->back_pitch;
2000-02-22 08:43:59 -07:00
dev_priv->depth_cpp = init->depth_cpp;
dev_priv->depth_offset = init->depth_offset;
dev_priv->depth_pitch = init->depth_pitch;
2001-02-15 01:12:14 -07:00
/* FIXME: Need to support AGP textures...
*/
dev_priv->texture_offset = init->texture_offset[0];
dev_priv->texture_size = init->texture_size[0];
2002-07-05 02:31:11 -06:00
DRM_GETSAREA();
if (!dev_priv->sarea) {
DRM_ERROR("failed to find sarea!\n");
2002-07-05 02:31:11 -06:00
return DRM_ERR(EINVAL);
}
2001-02-15 01:12:14 -07:00
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
if (! dev_priv->used_new_dma_init) {
dev_priv->status = drm_core_findmap(dev, init->status_offset);
if (!dev_priv->status) {
DRM_ERROR("failed to find status page!\n");
return DRM_ERR(EINVAL);
}
dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
if (!dev_priv->mmio) {
DRM_ERROR("failed to find mmio region!\n");
return DRM_ERR(EINVAL);
}
dev_priv->warp = drm_core_findmap(dev, init->warp_offset);
if (!dev_priv->warp) {
DRM_ERROR("failed to find warp microcode region!\n");
return DRM_ERR(EINVAL);
}
dev_priv->primary = drm_core_findmap(dev, init->primary_offset);
if (!dev_priv->primary) {
DRM_ERROR("failed to find primary dma region!\n");
return DRM_ERR(EINVAL);
}
dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset);
if (!dev->agp_buffer_map) {
DRM_ERROR("failed to find dma buffer region!\n");
return DRM_ERR(EINVAL);
}
drm_core_ioremap(dev_priv->warp, dev);
drm_core_ioremap(dev_priv->primary, dev);
drm_core_ioremap(dev->agp_buffer_map, dev);
}
2001-02-15 01:12:14 -07:00
dev_priv->sarea_priv =
(drm_mga_sarea_t *) ((u8 *) dev_priv->sarea->handle +
init->sarea_priv_offset);
2001-02-15 01:12:14 -07:00
if (!dev_priv->warp->handle ||
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
!dev_priv->primary->handle ||
((dev_priv->dma_access != 0) &&
((dev->agp_buffer_map == NULL) ||
(dev->agp_buffer_map->handle == NULL)))) {
DRM_ERROR("failed to ioremap agp regions!\n");
2002-07-05 02:31:11 -06:00
return DRM_ERR(ENOMEM);
}
ret = mga_warp_install_microcode(dev_priv);
if (ret < 0) {
DRM_ERROR("failed to install WARP ucode!\n");
2001-02-15 01:12:14 -07:00
return ret;
2000-02-22 08:43:59 -07:00
}
2001-02-15 01:12:14 -07:00
ret = mga_warp_init(dev_priv);
if (ret < 0) {
DRM_ERROR("failed to init WARP engine!\n");
2001-02-15 01:12:14 -07:00
return ret;
2000-04-04 16:08:14 -06:00
}
dev_priv->prim.status = (u32 *) dev_priv->status->handle;
2000-04-04 16:08:14 -06:00
mga_do_wait_for_idle(dev_priv);
2001-02-15 01:12:14 -07:00
/* Init the primary DMA registers.
*/
MGA_WRITE(MGA_PRIMADDRESS, dev_priv->primary->offset | MGA_DMA_GENERAL);
2001-03-19 05:04:12 -07:00
#if 0
MGA_WRITE(MGA_PRIMPTR, virt_to_bus((void *)dev_priv->prim.status) | MGA_PRIMPTREN0 | /* Soft trap, SECEND, SETUPEND */
MGA_PRIMPTREN1); /* DWGSYNC */
2001-03-19 05:04:12 -07:00
#endif
2000-04-04 16:08:14 -06:00
dev_priv->prim.start = (u8 *) dev_priv->primary->handle;
dev_priv->prim.end = ((u8 *) dev_priv->primary->handle
2001-02-15 01:12:14 -07:00
+ dev_priv->primary->size);
dev_priv->prim.size = dev_priv->primary->size;
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
dev_priv->prim.tail = 0;
dev_priv->prim.space = dev_priv->prim.size;
dev_priv->prim.wrapped = 0;
2000-04-04 16:08:14 -06:00
2001-02-15 01:12:14 -07:00
dev_priv->prim.last_flush = 0;
dev_priv->prim.last_wrap = 0;
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
dev_priv->prim.high_mark = 256 * DMA_BLOCK_SIZE;
2001-02-15 01:12:14 -07:00
dev_priv->prim.status[0] = dev_priv->primary->offset;
dev_priv->prim.status[1] = 0;
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
dev_priv->sarea_priv->last_wrap = 0;
dev_priv->sarea_priv->last_frame.head = 0;
dev_priv->sarea_priv->last_frame.wrap = 0;
if (mga_freelist_init(dev, dev_priv) < 0) {
DRM_ERROR("could not initialize freelist\n");
2002-07-05 02:31:11 -06:00
return DRM_ERR(ENOMEM);
2000-04-04 16:08:14 -06:00
}
2001-02-15 01:12:14 -07:00
return 0;
}
static int mga_do_cleanup_dma(drm_device_t * dev)
2001-02-15 01:12:14 -07:00
{
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
int err = 0;
DRM_DEBUG("\n");
2001-02-15 01:12:14 -07:00
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
if (dev->irq_enabled)
drm_irq_uninstall(dev);
if (dev->dev_private) {
2001-02-15 01:12:14 -07:00
drm_mga_private_t *dev_priv = dev->dev_private;
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
if ((dev_priv->warp != NULL)
&& (dev_priv->mmio->type != _DRM_CONSISTENT))
drm_core_ioremapfree(dev_priv->warp, dev);
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
if ((dev_priv->primary != NULL)
&& (dev_priv->primary->type != _DRM_CONSISTENT))
drm_core_ioremapfree(dev_priv->primary, dev);
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
if (dev->agp_buffer_map != NULL)
drm_core_ioremapfree(dev->agp_buffer_map, dev);
Adds support for PCI cards to MGA DRM This patch adds serveral new ioctls and a new query to get_param query to support PCI MGA cards. Two ioctls were added to implement interrupt based waiting. With this change, the client-side driver no longer needs to map the primary DMA region or the MMIO region. Previously, end-of-frame waiting was done by busy waiting in the client-side driver until one of the MMIO registers (the current DMA pointer) matched a pointer to the end of primary DMA space. By using interrupts, the busy waiting and the extra mappings are removed. A third ioctl was added to bootstrap DMA. This ioctl, which is used by the X-server, moves a *LOT* of code from the X-server into the kernel. This allows the kernel to do whatever needs to be done to setup DMA buffers. The entire process and the locations of the buffers are hidden from user-mode. Additionally, a get_param query was added to differentiate between G4x0 cards and G550 cards. A gap was left in the numbering sequence so that, if needed, G450 cards could be distinguished from G400 cards. According to Ville Syrjälä, the G4x0 cards and the G550 cards handle anisotropic filtering differently. This seems the most compatible way to let the client-side driver know which card it's own. Doing this very small change now eliminates the need to bump the DRM minor version twice. http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2 A number of ioctl handlers in linux-core were also modified so that they could be called in-kernel. In these cases, the in-kernel callable version kept the existing name (e.g., drm_agp_acquire) and the ioctl handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl). This patch also replaces the drm_agp_do_release function with drm_agp_release. drm_agp_release (drm_core_agp_release in the previous patch) is very similar to drm_agp_do_release, and I saw no reason to have both. This commit *breaks the build* on BSD. Eric said that he would make the required updates to the BSD side soon. Xorg bug: 3259 Reviewed by: Eric Anholt
2005-06-14 16:34:11 -06:00
if (dev_priv->used_new_dma_init) {
if (dev_priv->warp != NULL) {
drm_rmmap(dev, (void *) dev_priv->warp->offset);
}
if (dev_priv->primary != NULL) {
if (dev_priv->primary->type != _DRM_CONSISTENT) {
drm_rmmap(dev, (void *) dev_priv->primary->offset);
}
else {
drm_free(dev_priv->primary, sizeof(drm_map_t), DRM_MEM_DRIVER);
}
}
if (dev_priv->warp_dmah != NULL) {
drm_pci_free(dev, dev_priv->warp_dmah);
dev_priv->warp_dmah = NULL;
}
if (dev_priv->primary_dmah != NULL) {
drm_pci_free(dev, dev_priv->primary_dmah);
dev_priv->primary_dmah = NULL;
}
if (dev_priv->mmio != NULL) {
drm_rmmap(dev, (void *) dev_priv->mmio->offset);
}
if (dev_priv->status != NULL) {
drm_rmmap(dev, (void *) dev_priv->status->offset);
}
if (dev_priv->agp_mem != NULL) {
if (dev->agp_buffer_map != NULL) {
drm_rmmap(dev, (void *) dev->agp_buffer_map->offset);
}
if (dev_priv->agp_textures != NULL) {
drm_rmmap(dev, (void *) dev_priv->agp_textures->offset);
dev_priv->agp_textures = NULL;
}
drm_unbind_agp(dev_priv->agp_mem);
drm_free_agp(dev_priv->agp_mem, dev_priv->agp_pages);
dev_priv->agp_pages = 0;
dev_priv->agp_mem = NULL;
}
if ((dev->agp != NULL) && dev->agp->acquired) {
err = drm_agp_release(dev);
}
dev_priv->used_new_dma_init = 0;
}
dev_priv->warp = NULL;
dev_priv->primary = NULL;
dev_priv->mmio = NULL;
dev_priv->status = NULL;
dev_priv->sarea = NULL;
dev_priv->sarea_priv = NULL;
dev->agp_buffer_map = NULL;
memset(&dev_priv->prim, 0, sizeof(dev_priv->prim));
dev_priv->warp_pipe = 0;
memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys));
2001-02-15 01:12:14 -07:00
if (dev_priv->head != NULL) {
mga_freelist_cleanup(dev);
2001-02-15 01:12:14 -07:00
}
2000-04-04 16:08:14 -06:00
}
2001-02-15 01:12:14 -07:00
2000-04-04 16:08:14 -06:00
return 0;
}
int mga_dma_init(DRM_IOCTL_ARGS)
2000-04-04 16:08:14 -06:00
{
2002-07-05 02:31:11 -06:00
DRM_DEVICE;
2000-04-04 16:08:14 -06:00
drm_mga_init_t init;
int err;
2000-09-06 14:56:34 -06:00
LOCK_TEST_WITH_RETURN(dev, filp);
DRM_COPY_FROM_USER_IOCTL(init, (drm_mga_init_t __user *) data,
sizeof(init));
2000-09-06 14:56:34 -06:00
switch (init.func) {
2000-04-04 16:08:14 -06:00
case MGA_INIT_DMA:
err = mga_do_init_dma(dev, &init);
if (err) {
(void) mga_do_cleanup_dma(dev);
}
return err;
2000-04-04 16:08:14 -06:00
case MGA_CLEANUP_DMA:
return mga_do_cleanup_dma(dev);
2000-04-04 16:08:14 -06:00
}
2002-07-05 02:31:11 -06:00
return DRM_ERR(EINVAL);
2000-02-22 08:43:59 -07:00
}
2001-02-15 01:12:14 -07:00
/* ================================================================
* Primary DMA stream management
*/
2000-02-22 08:43:59 -07:00
int mga_dma_flush(DRM_IOCTL_ARGS)
2000-02-22 08:43:59 -07:00
{
2002-07-05 02:31:11 -06:00
DRM_DEVICE;
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
2001-02-15 01:12:14 -07:00
drm_lock_t lock;
2000-02-22 08:43:59 -07:00
LOCK_TEST_WITH_RETURN(dev, filp);
2000-09-06 14:56:34 -06:00
DRM_COPY_FROM_USER_IOCTL(lock, (drm_lock_t __user *) data,
sizeof(lock));
DRM_DEBUG("%s%s%s\n",
(lock.flags & _DRM_LOCK_FLUSH) ? "flush, " : "",
(lock.flags & _DRM_LOCK_FLUSH_ALL) ? "flush all, " : "",
(lock.flags & _DRM_LOCK_QUIESCENT) ? "idle, " : "");
2001-02-15 01:12:14 -07:00
WRAP_WAIT_WITH_RETURN(dev_priv);
2001-02-15 01:12:14 -07:00
if (lock.flags & (_DRM_LOCK_FLUSH | _DRM_LOCK_FLUSH_ALL)) {
mga_do_dma_flush(dev_priv);
2000-02-22 08:43:59 -07:00
}
if (lock.flags & _DRM_LOCK_QUIESCENT) {
#if MGA_DMA_DEBUG
int ret = mga_do_wait_for_idle(dev_priv);
if (ret < 0)
DRM_INFO("%s: -EBUSY\n", __FUNCTION__);
return ret;
#else
return mga_do_wait_for_idle(dev_priv);
#endif
2001-02-15 01:12:14 -07:00
} else {
return 0;
2000-04-04 16:08:14 -06:00
}
2000-02-22 08:43:59 -07:00
}
int mga_dma_reset(DRM_IOCTL_ARGS)
2000-04-04 16:08:14 -06:00
{
2002-07-05 02:31:11 -06:00
DRM_DEVICE;
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
2001-02-15 01:12:14 -07:00
LOCK_TEST_WITH_RETURN(dev, filp);
2001-02-15 01:12:14 -07:00
return mga_do_dma_reset(dev_priv);
2000-04-04 16:08:14 -06:00
}
2001-02-15 01:12:14 -07:00
/* ================================================================
* DMA buffer management
*/
2000-02-22 08:43:59 -07:00
static int mga_dma_get_buffers(DRMFILE filp, drm_device_t * dev, drm_dma_t * d)
2001-02-15 01:12:14 -07:00
{
drm_buf_t *buf;
int i;
2000-09-06 14:56:34 -06:00
for (i = d->granted_count; i < d->request_count; i++) {
buf = mga_freelist_get(dev);
if (!buf)
return DRM_ERR(EAGAIN);
2000-09-06 14:56:34 -06:00
2003-03-28 07:27:37 -07:00
buf->filp = filp;
2000-02-22 08:43:59 -07:00
if (DRM_COPY_TO_USER(&d->request_indices[i],
&buf->idx, sizeof(buf->idx)))
2002-07-05 02:31:11 -06:00
return DRM_ERR(EFAULT);
if (DRM_COPY_TO_USER(&d->request_sizes[i],
&buf->total, sizeof(buf->total)))
2002-07-05 02:31:11 -06:00
return DRM_ERR(EFAULT);
2000-09-06 14:56:34 -06:00
2001-02-15 01:12:14 -07:00
d->granted_count++;
2000-02-22 08:43:59 -07:00
}
2001-02-15 01:12:14 -07:00
return 0;
2000-02-22 08:43:59 -07:00
}
2000-09-06 14:56:34 -06:00
int mga_dma_buffers(DRM_IOCTL_ARGS)
2000-04-04 16:08:14 -06:00
{
2002-07-05 02:31:11 -06:00
DRM_DEVICE;
2001-02-15 01:12:14 -07:00
drm_device_dma_t *dma = dev->dma;
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
drm_dma_t __user *argp = (void __user *)data;
2001-02-15 01:12:14 -07:00
drm_dma_t d;
int ret = 0;
LOCK_TEST_WITH_RETURN(dev, filp);
DRM_COPY_FROM_USER_IOCTL(d, argp, sizeof(d));
2000-04-04 16:08:14 -06:00
2001-02-15 01:12:14 -07:00
/* Please don't send us buffers.
*/
if (d.send_count != 0) {
DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n",
DRM_CURRENTPID, d.send_count);
2002-07-05 02:31:11 -06:00
return DRM_ERR(EINVAL);
2000-04-04 16:08:14 -06:00
}
2001-02-15 01:12:14 -07:00
/* We'll send you buffers.
*/
if (d.request_count < 0 || d.request_count > dma->buf_count) {
DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n",
DRM_CURRENTPID, d.request_count, dma->buf_count);
2002-07-05 02:31:11 -06:00
return DRM_ERR(EINVAL);
2001-02-15 01:12:14 -07:00
}
2000-07-11 05:41:07 -06:00
WRAP_TEST_WITH_RETURN(dev_priv);
2001-02-15 01:12:14 -07:00
d.granted_count = 0;
if (d.request_count) {
ret = mga_dma_get_buffers(filp, dev, &d);
2000-04-04 16:08:14 -06:00
}
DRM_COPY_TO_USER_IOCTL(argp, d, sizeof(d));
2001-02-15 01:12:14 -07:00
return ret;
2000-04-04 16:08:14 -06:00
}
2004-08-17 07:10:05 -06:00
/**
* Called just before the module is unloaded.
*/
int mga_driver_postcleanup(drm_device_t * dev)
2004-08-17 07:10:05 -06:00
{
drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
dev->dev_private = NULL;
return 0;
}
/**
* Called when the last opener of the device is closed.
*/
void mga_driver_pretakedown(drm_device_t * dev)
{
mga_do_cleanup_dma(dev);
2004-08-17 07:10:05 -06:00
}
int mga_driver_dma_quiescent(drm_device_t * dev)
2004-08-17 07:10:05 -06:00
{
drm_mga_private_t *dev_priv = dev->dev_private;
return mga_do_wait_for_idle(dev_priv);
2004-08-17 07:10:05 -06:00
}