Disconnect device while fence is exported.
Also disable this test for sytem with single GPU.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Disconnect device while BO is exported.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Same as simple test but while doing cs
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Add plug/unplug device and open/close device file
infrastructure.
Add basic test - unplug device while device file still
open. Close device file afterwards and replug the device.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Expose close device and add open device wich preserves
test index.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
This reverts commit a5a400c958.
Bo evict test was disabled by default per below commit.
So still keep it as disabled.
1f6a85cc test/amdgpu: disable bo eviction test by default
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
In syncobj test, 3 threads will be created. Sometimes
the first gfx IB and the third sdma IB will use same
physical page. There will be risk that sdma engine will
read gfx IB in the same physical page. So better to flush
the cache before commit the sdma IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
VCN is supported after AI family Arcturus.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
buffer_load/store_format_xyzw require 64bit vgpr_a[2].
The original parameter is one u32. Modify the shader binary to
fit the 64bit parameter.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: Gang Long <Gang.Long@amd.com>
On Raven2/Picasso, the default VRAM size is 2048M,
and the default GTT size is 3072M. If max_allocation
of VRAM exceeds half of GTT size, GTT memory can't
hold evicted bo from VRAM and bo in itself at the
same time. Then amdgpu_cs_list_validate will failed
with "Not enough memory for command submission" error.
NOTE:
The installed DRAM should be larger than 8GB,
if the VRAM size is 2048M.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The unit of size_metadata is one byte not four bytes.
Enable Metadata test.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
In syncobj test, wait thread and signal thread create
simultaneously. The ptr for GFX IB and SDMA IP should be
operated separately. With static, there will be risk that
GFX NOP is in SDMA IB or SDMA NOP is in GFX IB, then GFX or
SDMA hang caused.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
- Remove one unused variable.
- Convert two int-s into 'unsigned int'.
Motivated by a failed build of Chromium.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Victor Hugo Vianna Silva <victor.vianna10@gmail.com>
Add an entry for the "mxsfb-drm" driver, so that the test utilities
work with the mxsfb driver without passing the -M argument.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Instead of always dumping the rendered picture, check whether it matches
the expectations. This makes more sense for automated testing.
Retain the ability to dump the picture instead of checking it when a
file name is given as an argument. This also removes use of a hardcoded
file name in a world writable directory, which is an unsafe thing to
do anyway.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Run the test on a core capable of 2D rendering instead of hardcoding to
core zero.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Just so that it's obvious what failed and why.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This makes the test utilities work with the i.MX DCSS driver without the
necessity of using the -M argument.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
komeda is one of the supported GPUs in the kernel tree so this adds it
to libdrm modules to look for in tests.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Implement secure bounce test. Steps implemented
as outlined by Christian K.
v2: Remove gpu_info; add comment describing
the purpose and steps of the test.
v3: Parameterize "secure" in amdgpu_bo_lcopy() and
amdgpu_bo_move(). Set them both to 0.
Allocate buffer Bob to be non-TMZ.
v4: Fix an off-by-one bug which was causing
the test to segfault.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables security suite tests.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding drm version checking for security suite.
drm version need to be at least 3.37.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch add test to submit a sdma command with secure context.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMA's atomic behavir is unlike GFX,If the comparing data is not
equal to destination data,
For GFX, loop again till gfx timeout(system hang).
For DMA, loop again till timer expired and then send interrupt.
So testcase can't use interrupt mechanism.
We take another way to verify. When the comparing data is not
equal to destination data, overwrite the source data to the destination
buffer. Otherwise, original destination data unchanged.
So if the bo_cpu data is overwritten, the result is passed.
Steps:
1. use linear write packet to write 0xdeadbeaf to secure buffer,
2. use atmoic packet and ATOMIC_CMPSWAP_RTN_32 opcode to compare
the cmp_data(0xdeadbeaf) to the written data which has been encrypted.
v2: add the case of (dest_data != cmp_data).
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to test the command submission with secure context.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Secure buffer is only able to be read with trusted ip block.
So we need use GFX ip to read it back instead of CPU.
Steps:
1. use write_data packet to write 0xdeadbeaf to secure buffer,
2. use atmoic_mem packet and ATOMIC_CMPSWAP_RTN_32 opcode to compare
the cmp_data(0xdeadbeaf) to the written data which has been encrypted.
If the result is equal, then overwrite the src_data(0x12345678) to the
secure buffer and return directly. Otherwise loop again until gfx timeout
and the secure buffer data unchanged.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands secure param for amdgpu_test_exec_cs_helper_raw.
The flag is transfered to kernel with cs.
v2: squash in change from context to IB flag
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add add device handle as input param for exec_cs_helper
and write_linear_helper.
Because they are needed in security tests.
v2: fix typo that basic tests should be un-secure.
v3: refine the function implementation.
v4: remove amdgpu_cs_ctx_create3 calling.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expand write linear helper for security to submit the command
with secure context.
v2: refine the function implementation.
v3: remove amdgpu_cs_ctx_create3.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add secure buffer allocation test for invisible VRAM.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add secure buffer allocation test for system memory.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add a new test suite to store security tests.
In Raven+ asics, it will support TMZ (trust memory zone), and it is
page-based protection feature.
v2: remove tests/amdgpu/Makefile.am and update to
tests/amdgpu/meson.build
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Arcturus decode test support only
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx pipeline(CPG), cases below is not suitable:
- Command submission Test (GFX)
- Command submission Test (Multi-Fence)
- Sync dependency Test
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx engine, add function to blacklist gfx related test.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is workaround of firmware issue, and the change has no impact
on the legacy HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
It is not used for VCN from VCN1, but VCN3 use it
for other feature, so clear it, because we don't
use the feature for now
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
VCN3.0 has its own set of internal regs
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
This option finds all connected connector and then sets its preferred
mode on it. If no preferred mode is available, first mode is used.
This option must be set w/o any mode or plane.
This allows for a quick test on all connected outputs.
Loosely based on the work by Ezequiel Garcia <ezequiel@collabora.com>
Changes since Ezequiel's work:
- implement atomic codepath
- set all connectors
- pick correct crtc
- don't set -r by default
- nearly identical output in atomic and non-atomic codepaths
v2:
- Use the crtc->crtc_id, instead of the plane's current crtc_id
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code a tiny bit more symmetrical.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The very final drmModeAtommicCommit tears down the existing mode/plane
setup. Following it we clean up other misc state laying around.
Chances are that it will not fail, but in the extremely unlikely case it
does, there's nothing one can do.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the hunk of code into a function, making the overall flow easier to
follow and providing some symmetry to the non-atomic path.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The function is closely related to pipe_find_crtc_and_mode() so we might
as well keep them together.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the function above set_mode, since we'll be using it from there as
of next commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Instead of duplicating the exact same code across the two functions,
fold them into one.
For some strange reason git diff may show atomic_clear_mode() as changed
The function in untouched, despite the misleading output.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code shorter and easier to read.
Currently if the user has not set the crtc_id, we fetch the crtc yet do
not "bother" setting the id - do so.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Let's make the code shorter, this avoid crashes (when drmModeGetCrtc()
fails) by using a couple of helpers. As get_resources() considers the
drmModeGetCrtc() fail non-fatal, we might as well handle it properly.
v2: Add a comment above the unreachable abort() (Eze)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
There's no point in keeping these around since we already fetch the
complete data set. Add respective count_ variables and greatly simplify
the existing code.
Extra brownie points for:
- using the inverse order in free_resources()
- don't memory leak the connector properties
- free the properties themselves, instead of only the objects
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Flesh out the bo_create + drmModeAddFB2 dance into a helper and use it.
Currently we're duplicating that in 4 places, many of which leaking et
al.
As a bonus point this highlights that the atomic_set_plane() seems tad
buggy. That'll be fixed with separate commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Don't bother opening the device node, if the args combination is invalid
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The two functions have been stubs for ages. The alluded generic ioctls
never came to be, assumingly because all new drivers support those.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Renoir is the same family as Raven, but it's with VCN2.0,
so it has to use VCN2.0 reg set
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-By: Thong Thai <thong.thai@amd.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Alex Deucher alexander.deucher@amd.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Just like the other tests (tools really) install drmdevice. It is a
simple tool which is useful for basic check/testing.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
FreeBSD also use (int, unsigned long int, ...) like GLIBC.
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Suggested by Emil [1]:
> Feel free to drop the random test altogether. It's an old public API
> no active users (pretty ancient code uses it) and the in-tree users
> drmSL and drmHash already have respective tests.
This test takes minutes to run, while all the other tests combined take
barely more than a second.
Dropping it also helps the CI by avoiding random timeouts when `random`
takes more than the 4 minutes (!) we've allowed for it.
[1] https://gitlab.freedesktop.org/mesa/drm/merge_requests/26#note_390066
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Combined with -Wundef (added in 75758d2ccf & enforced in ba17673eed),
this provides absolute safety against #ifdef typos.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When a mode is set with just a connector "-s foo",
we get a nasty segmentation fault. Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Often there are many similar modes, which cannot be selected
via modetest due to its simple string matching.
This change adds a mode index in the display output, which can
then be used to specify a specific modeline to be set.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: John Stultz <john.stultz@linaro.org>
[emil: rebase]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This patch fixes the following warning:
-Wformat-overflow=
v2: Use the correct strlcat(3).
v3: Use strncat(3) and remove libbsd dependency.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warnings:
-Wformat=
-Wmaybe-uninitialized
-Wmisleading-indentation
-Wstringop-truncation
-Wunused-function
-Wunused-variable
It also removes forward declarations and moves
global functions to the bottom, keeping locals
at the top, in ras_tests.c.
v2: Fix compilation.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Proper format for command line option "-l",
listing the supported and unsupported tests:
1) Add an aligned column header.
2) Align all fields into columns.
3) Fixed length fields, come before the last
column, which is a variable length field.
4) Variable length field, which is the name of the
test, goes in the last column.
5) If a suite is disabled, do not iterate over its
tests, as they'd naturally be all disabled.
Now the output looks like this:
$sudo ./amdgpu_test -l
What: ID: Status: Name
Suite: 1: ENABLED: Basic Tests
Test: 1: ENABLED: Query Info Test
Test: 2: ENABLED: Userptr Test
Test: 3: DISABLED: bo eviction Test
Test: 4: ENABLED: Command submission Test (GFX)
Test: 5: ENABLED: Command submission Test (Compute)
Test: 6: ENABLED: Command submission Test (Multi-Fence)
Test: 7: ENABLED: Command submission Test (SDMA)
Test: 8: ENABLED: SW semaphore Test
Test: 9: DISABLED: Sync dependency Test
Test: 10: DISABLED: Dispatch Test (Compute)
Test: 11: DISABLED: Dispatch Test (GFX)
Test: 12: DISABLED: Draw Test
Test: 13: DISABLED: GPU reset Test
Suite: 2: ENABLED: BO Tests
Test: 1: ENABLED: Export/Import
Test: 2: DISABLED: Metadata
Test: 3: ENABLED: CPU map/unmap
Test: 4: ENABLED: Memory alloc Test
Test: 5: ENABLED: Memory fail alloc Test
Test: 6: ENABLED: Find bo by CPU mapping
Suite: 3: DISABLED: CS Tests
Suite: 4: DISABLED: VCE Tests
Suite: 5: ENABLED: VCN Tests
Test: 1: ENABLED: VCN DEC create
Test: 2: ENABLED: VCN DEC decode
Test: 3: ENABLED: VCN DEC destroy
Test: 4: ENABLED: VCN ENC create
Test: 5: ENABLED: VCN ENC decode
Test: 6: ENABLED: VCN ENC destroy
Suite: 6: DISABLED: UVD ENC Tests
Suite: 7: DISABLED: Deadlock Tests
Suite: 8: ENABLED: VM Tests
Test: 1: ENABLED: resere vmid test
Test: 2: ENABLED: unaligned map
Test: 3: ENABLED: vm mapping test
Suite: 9: DISABLED: RAS Tests
Suite: 10: ENABLED: SYNCOBJ TIMELINE Tests
Test: 1: ENABLED: syncobj timeline test
$_
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warning:
-Wformat-overflow=
v2: Use the correct strlcat(3).
v3: Use strncat(3) and remove libbsd dependency.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warnings:
-Wformat=
-Wmaybe-uninitialized
-Wmisleading-indentation
-Wstringop-truncation
-Wunused-function
-Wunused-variable
It also removes forward declarations and moves
global functions to the bottom, keeping locals
at the top, in ras_tests.c.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The computer ring test name mis-match in different files,
thus may be set with TRUE on wrong platforms.
Change-Id: I0b918ff8faf08c9c9f1ad55f4dcd18f66b956901
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Add function to derive floating value of vertical
refresh rate from drm mode using pixel clock,
horizontal total size and vertical total size.
Use this function to find suitable mode having vrefresh
value which is matching with user provided vrefresh value.
If user doesn't provide any vrefresh value in args then
update vertical refresh rate value in pipe args using this
function.
Also use this function for printing floating vrefresh while
dumping all available modes.
This will give more accurate picture to user for available modes
differentiated by floating vertical refresh rate and help user
select more appropriate mode using suitable refresh rate value.
V4:
1) While setting mode, print mode name and vrefresh using struct
drmModeModeInfo instead of struct pipe_args.
2) Revert back to using a float value instead of float *
for vrefresh arg in connector_find_mode().
V3:
1) Change name of function used to derive refresh rate.
V2:
1) Don't use inline function for deriving refresh rate from mode.
2) If requested mode not found, print refresh rate only
if user had provided it in args.
Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
It can run dispatch/draw tests on new renoir chips. So it needs to
enable dispatch/draw tests for Renoir again.
Change-Id: I3a72a4bbfe0fc663ee0e3e58d8e9c304f513e568
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Userptr Test will fail on PAGE_SIZE bigger than BUFFER_SIZE(8 * 1024)
Signed-off-by: xinxu <xinxu@loongson.cn>
(cherry picked from commit fb7dfdc5fb58795365b70117c3eb625f2edb8f06)
Andrey Grodzovsky
Lang Yu
Jinzhou Su
Huang Rui
James Zhu
Feifei Xu
Victor Hugo Vianna Silva
Sonny Jiang
Tao Zhou
Fabio Estevam
Emmanuel Vadot
Luben Tuikov
Nicolas Caramelli
Lubomir Rintel
Thong Thai
Lucas Stach
Tianci.Yin
Carsten Haitzler
Alex Deucher
Aaron Liu
Le Ma
Leo Liu
Emil Velikov
Emil Velikov
Peter Seiderer
Michel Dänzer
Eric Engestrom
Eric Engestrom
Ezequiel Garcia
John Stultz
Marek Olšák
Yifan Zhang
Devarsh Thakkar
Flora Cui
changzhu
Ross Burton
xinxu@loongson.cn