Adding drm version checking for security suite.
drm version need to be at least 3.37.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch add test to submit a sdma command with secure context.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMA's atomic behavir is unlike GFX,If the comparing data is not
equal to destination data,
For GFX, loop again till gfx timeout(system hang).
For DMA, loop again till timer expired and then send interrupt.
So testcase can't use interrupt mechanism.
We take another way to verify. When the comparing data is not
equal to destination data, overwrite the source data to the destination
buffer. Otherwise, original destination data unchanged.
So if the bo_cpu data is overwritten, the result is passed.
Steps:
1. use linear write packet to write 0xdeadbeaf to secure buffer,
2. use atmoic packet and ATOMIC_CMPSWAP_RTN_32 opcode to compare
the cmp_data(0xdeadbeaf) to the written data which has been encrypted.
v2: add the case of (dest_data != cmp_data).
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to test the command submission with secure context.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Secure buffer is only able to be read with trusted ip block.
So we need use GFX ip to read it back instead of CPU.
Steps:
1. use write_data packet to write 0xdeadbeaf to secure buffer,
2. use atmoic_mem packet and ATOMIC_CMPSWAP_RTN_32 opcode to compare
the cmp_data(0xdeadbeaf) to the written data which has been encrypted.
If the result is equal, then overwrite the src_data(0x12345678) to the
secure buffer and return directly. Otherwise loop again until gfx timeout
and the secure buffer data unchanged.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands secure param for amdgpu_test_exec_cs_helper_raw.
The flag is transfered to kernel with cs.
v2: squash in change from context to IB flag
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add add device handle as input param for exec_cs_helper
and write_linear_helper.
Because they are needed in security tests.
v2: fix typo that basic tests should be un-secure.
v3: refine the function implementation.
v4: remove amdgpu_cs_ctx_create3 calling.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expand write linear helper for security to submit the command
with secure context.
v2: refine the function implementation.
v3: remove amdgpu_cs_ctx_create3.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add secure buffer allocation test for invisible VRAM.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add secure buffer allocation test for system memory.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add a new test suite to store security tests.
In Raven+ asics, it will support TMZ (trust memory zone), and it is
page-based protection feature.
v2: remove tests/amdgpu/Makefile.am and update to
tests/amdgpu/meson.build
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From drm-next:
commit c41219fda6e04255c44d37fd2c0d898c1c46abf1
Merge: e20bb857dea2 d96536f0fe69
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 21 10:44:32 2020 +1000
Merge tag 'drm-intel-next-fixes-2020-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Fix for TypeC power domain toggling on resets (Cc: stable).
Two compile time warning fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520123227.GA21104@jlahtine-desk.ger.corp.intel.com
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Arcturus decode test support only
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx pipeline(CPG), cases below is not suitable:
- Command submission Test (GFX)
- Command submission Test (Multi-Fence)
- Sync dependency Test
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx engine, add function to blacklist gfx related test.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables drm_intel_bufmgr on DG1 and allows us to pass dmabuf
import/export related tests with Piglit.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Missing RKL PCI ID preventing below test cases to succeed on RKL Platform.
igt@kms_frontbuffer_tracking
igt@kms_draw-crc
igt@kms_big_fb
Signed-off-by: sunil kumar dora sermsity <sunilx.kumar.dora.sermsity@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Two new patches landed in kernel adding new PCI ids:
123f62de419f ("drm/i915/rkl: Add RKL platform info and PCI ids")
52797a8e8529 ("drm/i915/ehl: Add new PCI ids")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
This is workaround of firmware issue, and the change has no impact
on the legacy HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
It is not used for VCN from VCN1, but VCN3 use it
for other feature, so clear it, because we don't
use the feature for now
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
VCN3.0 has its own set of internal regs
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
./xf86drm.c: In function 'drmNodeIsDRM':
../xf86drm.c:2825:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmGetMinorNameForFD':
../xf86drm.c:2938:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmParsePciBusInfo':
../xf86drm.c:3258:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmParsePciDeviceInfo':
../xf86drm.c:3427:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
../xf86drm.c: In function 'drmGetDeviceNameFromFd2':
../xf86drm.c:4305:7: error: "__FreeBSD__" is not defined [-Werror=undef]
#elif __FreeBSD__
^
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
This option finds all connected connector and then sets its preferred
mode on it. If no preferred mode is available, first mode is used.
This option must be set w/o any mode or plane.
This allows for a quick test on all connected outputs.
Loosely based on the work by Ezequiel Garcia <ezequiel@collabora.com>
Changes since Ezequiel's work:
- implement atomic codepath
- set all connectors
- pick correct crtc
- don't set -r by default
- nearly identical output in atomic and non-atomic codepaths
v2:
- Use the crtc->crtc_id, instead of the plane's current crtc_id
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code a tiny bit more symmetrical.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The very final drmModeAtommicCommit tears down the existing mode/plane
setup. Following it we clean up other misc state laying around.
Chances are that it will not fail, but in the extremely unlikely case it
does, there's nothing one can do.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the hunk of code into a function, making the overall flow easier to
follow and providing some symmetry to the non-atomic path.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The function is closely related to pipe_find_crtc_and_mode() so we might
as well keep them together.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the function above set_mode, since we'll be using it from there as
of next commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Instead of duplicating the exact same code across the two functions,
fold them into one.
For some strange reason git diff may show atomic_clear_mode() as changed
The function in untouched, despite the misleading output.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code shorter and easier to read.
Currently if the user has not set the crtc_id, we fetch the crtc yet do
not "bother" setting the id - do so.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Let's make the code shorter, this avoid crashes (when drmModeGetCrtc()
fails) by using a couple of helpers. As get_resources() considers the
drmModeGetCrtc() fail non-fatal, we might as well handle it properly.
v2: Add a comment above the unreachable abort() (Eze)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
There's no point in keeping these around since we already fetch the
complete data set. Add respective count_ variables and greatly simplify
the existing code.
Extra brownie points for:
- using the inverse order in free_resources()
- don't memory leak the connector properties
- free the properties themselves, instead of only the objects
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Flesh out the bo_create + drmModeAddFB2 dance into a helper and use it.
Currently we're duplicating that in 4 places, many of which leaking et
al.
As a bonus point this highlights that the atomic_set_plane() seems tad
buggy. That'll be fixed with separate commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Don't bother opening the device node, if the args combination is invalid
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The two functions have been stubs for ages. The alluded generic ioctls
never came to be, assumingly because all new drivers support those.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Freedreno uses VALGRIND_ENABLE_ADDR_ERROR_REPORTING_IN_RANGE that was
introduced in Valgrind 3.10.0
Raspbian Buster includes Valgrind 3.7.0, so when valgrind is installed
as freedreno is build by default the build becomes broken. So lets
require 3.10 to enable valgrind when freedreno is built.
v2: Keep the arguments listed in the same order (Emil Velikov)
Closes: https://gitlab.freedesktop.org/mesa/drm/-/issues/37
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Aaron Liu
Huang Rui
Alex Deucher
Le Ma
James Zhu
Tapani Pälli
sitanliu
Adam Miszczak
Jeremy Cline
sunil kumar dora sermsity
Pavan Kumar Ramayanam
José Roberto de Souza
Leo Liu
Heiko Thiery
Eric Engestrom
Dave Airlie
Emil Velikov
Emil Velikov
Jose Maria Casanova Crespo