This reverts commit a5a400c958.
Bo evict test was disabled by default per below commit.
So still keep it as disabled.
1f6a85cc test/amdgpu: disable bo eviction test by default
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
buffer_load/store_format_xyzw require 64bit vgpr_a[2].
The original parameter is one u32. Modify the shader binary to
fit the 64bit parameter.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: Gang Long <Gang.Long@amd.com>
On Raven2/Picasso, the default VRAM size is 2048M,
and the default GTT size is 3072M. If max_allocation
of VRAM exceeds half of GTT size, GTT memory can't
hold evicted bo from VRAM and bo in itself at the
same time. Then amdgpu_cs_list_validate will failed
with "Not enough memory for command submission" error.
NOTE:
The installed DRAM should be larger than 8GB,
if the VRAM size is 2048M.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Implement secure bounce test. Steps implemented
as outlined by Christian K.
v2: Remove gpu_info; add comment describing
the purpose and steps of the test.
v3: Parameterize "secure" in amdgpu_bo_lcopy() and
amdgpu_bo_move(). Set them both to 0.
Allocate buffer Bob to be non-TMZ.
v4: Fix an off-by-one bug which was causing
the test to segfault.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMA's atomic behavir is unlike GFX,If the comparing data is not
equal to destination data,
For GFX, loop again till gfx timeout(system hang).
For DMA, loop again till timer expired and then send interrupt.
So testcase can't use interrupt mechanism.
We take another way to verify. When the comparing data is not
equal to destination data, overwrite the source data to the destination
buffer. Otherwise, original destination data unchanged.
So if the bo_cpu data is overwritten, the result is passed.
Steps:
1. use linear write packet to write 0xdeadbeaf to secure buffer,
2. use atmoic packet and ATOMIC_CMPSWAP_RTN_32 opcode to compare
the cmp_data(0xdeadbeaf) to the written data which has been encrypted.
v2: add the case of (dest_data != cmp_data).
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Secure buffer is only able to be read with trusted ip block.
So we need use GFX ip to read it back instead of CPU.
Steps:
1. use write_data packet to write 0xdeadbeaf to secure buffer,
2. use atmoic_mem packet and ATOMIC_CMPSWAP_RTN_32 opcode to compare
the cmp_data(0xdeadbeaf) to the written data which has been encrypted.
If the result is equal, then overwrite the src_data(0x12345678) to the
secure buffer and return directly. Otherwise loop again until gfx timeout
and the secure buffer data unchanged.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands secure param for amdgpu_test_exec_cs_helper_raw.
The flag is transfered to kernel with cs.
v2: squash in change from context to IB flag
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add add device handle as input param for exec_cs_helper
and write_linear_helper.
Because they are needed in security tests.
v2: fix typo that basic tests should be un-secure.
v3: refine the function implementation.
v4: remove amdgpu_cs_ctx_create3 calling.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expand write linear helper for security to submit the command
with secure context.
v2: refine the function implementation.
v3: remove amdgpu_cs_ctx_create3.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx pipeline(CPG), cases below is not suitable:
- Command submission Test (GFX)
- Command submission Test (Multi-Fence)
- Sync dependency Test
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx engine, add function to blacklist gfx related test.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Combined with -Wundef (added in 75758d2ccf & enforced in ba17673eed),
this provides absolute safety against #ifdef typos.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch fixes the following warnings:
-Wformat=
-Wmaybe-uninitialized
-Wmisleading-indentation
-Wstringop-truncation
-Wunused-function
-Wunused-variable
It also removes forward declarations and moves
global functions to the bottom, keeping locals
at the top, in ras_tests.c.
v2: Fix compilation.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warnings:
-Wformat=
-Wmaybe-uninitialized
-Wmisleading-indentation
-Wstringop-truncation
-Wunused-function
-Wunused-variable
It also removes forward declarations and moves
global functions to the bottom, keeping locals
at the top, in ras_tests.c.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
It can run dispatch/draw tests on new renoir chips. So it needs to
enable dispatch/draw tests for Renoir again.
Change-Id: I3a72a4bbfe0fc663ee0e3e58d8e9c304f513e568
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Userptr Test will fail on PAGE_SIZE bigger than BUFFER_SIZE(8 * 1024)
Signed-off-by: xinxu <xinxu@loongson.cn>
(cherry picked from commit fb7dfdc5fb58795365b70117c3eb625f2edb8f06)
for better clarification
v2: accordingly change dispatch_test caller in gpu_reset test
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. perform gpu reset
2. perform dispatch test to verify gpu reset to a good state
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
1. skip test if there's no desired ring
2. clear shader buffer
3. update command buffer for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
add memcpy draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memcpy dispatch test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset dispatch test for gfx9
v2: disable dispatch test for other ASICs
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
Call amdgpu_bo_va_op_raw directly in amdgpu_bo_alloc_and_map_raw
Move amdgpu_bo_alloc_and_map_raw into C file to avoid including
unistd.h in amdgpu_test.h
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This will prevent any more missing `#include "config.h"` bug, at the
cost of having to recompile some files that didn't need to be when
changing build options.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
for(( i=1; i < 100; i++))
do
echo "Hello, Welcome $i times "
sudo ./amdgpu_test -s 1 -t 5
done
with above stricpt, run in two terminals, will reproduce Felix's swap leeking issue.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
While at it, align with the other half on the next line.
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The test is as following:
1) Create context A & B
2) Send a command submission using context A which fires up a compute shader.
3) The shader wait a bit and then write a value to a memory location.
4) Send a command submission using context B which writes another value to the same memory location, but having an explicit dependency on the first command submission.
5) Wait with the CPU for both submissions to finish and inspect the written value.
Test passes if the value seen in the memory location after both submissions is from command B.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: monk.liu <Monk.Liu@amd.com>
[v2: actually hook up the test case]
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Before this change, the error message is:
"WARNING - Suite initialization failed..."
People might think this is a driver problem.
Tested with non-privileged user. Now the error message is like:
...
Error:Permission denied. Hint:Try to run this test program as root.
WARNING - Suite initialization failed for 'Basic Tests'.
...
Tested as root with no regression.
amdgpu_test uses CUnit. CUnit outputs warning message to stdout.
To be consistent, this commit outputs error message to stdout.
v2: Use strerror instead of %m. %m is a GNU C Library extension.
v3: Limit code and commit message within 80 characters per line.
Update commit message.
Remove a space before starting parenthesis in function call.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu
Feifei Xu
Luben Tuikov
Aaron Liu
Huang Rui
Le Ma
Eric Engestrom
Marek Olšák
Flora Cui
changzhu
xinxu@loongson.cn
Andrey Grodzovsky
Eric Engestrom
Chunming Zhou
Hawking Zhang
Christian König
Nicolai Hähnle
Alex Xie