If the pci_device's actual gen was > 4, then we stupidly set
bufmgr_gem->gen = 6. Luckily this caused no bugs, and this fix shouldn't
change any behavior, because all checks against the gen currently have one
of the forms below:
gen == 2
gen == 3
gen >= 4
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
This just gets packet name and length in place, with the remainder
unfinished. I've long since finished the work that got me started
fixing up the decode.
Since CC_STATE_POINTERS for gen6 and 7 are quite different but use the
same opcode, move gen6 out to a helper function too, so we can use a
helper function for gen7.
This puts the error message in a consistent location relative to the
packet, and while I'm here I made the error message a bit more
informative.
Now, most static length packets need to just declare their length in
the table and not worry.
The overflow checks were all thoroughly untested, and a bunch of the
ones I'm deleting were pretty broken. Now, in the case of overflow,
you just decode data of 0xd0d0d0d0, and instr_out prints the warning
message instead. Note that this still has the same issue of being
under-tested, but at least it's one place instead of per-packet.
A couple of BUFFER_FAIL uses are left where the length to be decoded
could be (significantly) larger than a page, and the decode didn't
just call instr_out (which doesn't dereference data itself unless it's
safe).
The .batch was generated using the dump-a-batch branch of
git://people.freedesktop.org/~anholt/mesa
using glxgears on gen7 hardware, using INTEL_DEVID_OVERRIDE for
non-gen7 (this means that offsets in the buffers for non-gen7 are 0!).
The .ref was generated by:
./test_decode tests/gen7-3d.batch -dump.
The .sh exists because you can't supply arguments to tests using the
simple automake tests driver. Something reasonable could be done
using automake's parallel-tests driver (in fact, a previous version of
the patch did that), but I was concerned that:
1) The parallel-tests driver is documented to be unstable -- they may
change interfaces on us later.
2) The parallel-tests driver hides the output of tests in .log files
scattered all over the tree, which was ugly and more painful to
work with.
v2: Actually add the batch files, add a .gitignore for the *-new.txt
files added after failures, and fix failure mode for undetected
chipset name.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Consumers often want to choose stdout vs stderr, and for testing I
want to output to an open_memstream file.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It was producing an unused code warning. I'm tempted to just remove
it, since it's unused, but I *might* use it soon.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
I'd rather be able to use c99 variable declarations (there's a lot of
awful code layout due to being c90ish), but I'll leave that for later.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
There was plenty of dropped useful data, and some horribly
mis-formatted data.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
We've got a different (better) set of warning flags in place in this
tree.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
My plan is to use this drm_intel_dump_batchbuffer() interface for the
current GPU tools, and the current Mesa batch dumping usage, while
eventually building more interesting interfaces for other uses.
Warnings are currently suppressed by using a helper lib with CFLAGS
set manually, because the code is totally not ready for libdrm's warnings
setup.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
Some comments weren't wrapped, and for some reason uint32_t *data got
an extra space (while other instances of "type *identifier" didn't),
and the indentation of the opcode-list structs got trashed.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
We generally go for kernel style in this tree, and this 4-space indent
stuff was bothering me. The new results have some ugly bits, but
they're in places where we desperately want to be using helper
functions anyway.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
These will be used by intel_decode.c, and were taken from intel-gpu-tools.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
This will make these macros reusable from intel_decode.c, which
doesn't have a bufmgr_gem context, without faking the struct. We
should generally only be using these macros from bufmgr_gem context
setup anyway.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
This is from commit dd9a5b4f7f.
We've been sharing this file between that repo and Mesa, and it's time
to build a real interface using it. I'm also hoping to apply some of
its packet-walking logic for AUB dumping and batch validation
purposes.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eugeni Dodonov <eugeni@dodonov.net>
gem_flink|gem_open are DRM_AUTH ioctl, and being lazy we do not
establish ourselves as authenticated before testing the ioctls. So
instead of aborting, skip the test unless we have root privileges (and
so DRM_MASTER and the DRM_AUTH restriction no longer applies).
A future test could assert that the flink fails without proper
authentication.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43924
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
During free we unconditionally delete the bo from the vma cache. This
relies on the its list member being kept in a sane state. This fails
after the object is purged, as the purge operation performs a pure
deletion and doesn't reset the list member, leaving a pair of dangling
pointers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add structs and functions necessary for the new plane and fb handling code,
including a new header, drm_fourcc.h, that includes the surface formats
supported by various DRM drivers.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Hopefully all the bugs in the callers have been found, so time to
handle the failures "gracefully" again.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As the max number of VMA mappings is a hard per-process limit, we need
to include the number of currently active mappings when evicting in
order to make room for a new mmap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
There is a per-process limit on the number of vma that the process can
keep open, so we cannot keep an unlimited cache of unused vma's (besides
keeping track of all those vma in the kernel adds considerable overhead).
However, in order to work around inefficiencies in the kernel it is
beneficial to reuse the vma, so keep a MRU cache of vma.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As a precautionary measure munmap on buffer free so that we never leak
the vma. Also include a warning during debugging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chad Versace
Eric Anholt
Jesse Barnes
Johannes Obermayr
Chris Wilson
Dave Airlie