On many chipsets, the checks for DPLL enable or VGA mode will prevent the
pipeconf regs from being restored, which could result in a blank display or X
failing to come back after resume. So restore them unconditionally along with
actually restoring pipe B's palette correctly.
On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time. So save/restore them properly.
There were two problems with the existing callback code: the vblank
enable callback happened multiple times per disable, making drivers more
complex than they had to be, and there was a race between the final
decrement of the vblank usage counter and the next enable call, which
could have resulted in a put->schedule disable->get->enable->disable
sequence, which would be bad.
So add a new vblank_enabled array to track vblank enable on per-pipe
basis, and add a lock to protect it along with the refcount +
enable/disable calls to fix the race.
sequence number may actually turn up before the corresponding fence
object has been queued on the ring.
Fence drivers can use this member to determine whether a
sequence number must be re-reported.
In hibernate, we may end up calling the VGA save regs function twice, so we
need to make sure it's idempotent. That means leaving ARX in index mode after
the first save operation. Fixes hibernate on 965.
i915_flush_ttm was unconditionally executing a clflush instruction
to (obviously) flush the cache. Instead, check if the cpu supports
clflush, and if not, fall back to calling wbinvd to flush the entire
cache.
Signed-off-by: Kyle McMartin <kmcmartin@redhat.com>
(1 << bits) is an undefined value when bits == 32.
gcc may generate 1 with this expression
which will lead to an infinite retry loop in
drm_ht_just_insert_please.
Because of the different implement of hash_long,
this issue is more frequenly see on 64 bit system
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
I couldn't figure out what drm_bo_type_dc was for; Dave Airlie finally clued
me in that it was the 'normal' buffer objects with kernel allocated pages
that could be mmapped from the drm device file.
I thought that 'drm_bo_type_device' was a more descriptive name.
I also added a bunch of comments describing the use of the type enum values and
the functions that use them.
Flags pending validation were stored in a misleadingly named field, 'mask'.
As 'mask' is already used to indicate pieces of a flags field which are
changing, it seems better to use a name reflecting the actual purpose of
this field. I chose 'proposed_flags' as they may not actually end up in
'flags', and in an case will be modified when they are moved over.
This affects the API, but not ABI of the user-mode interface.
Previously, dummy_read_page was used only for read-only user allocations; it
filled in pages that were not present in the user address map (presumably,
these were allocated but never written to pages).
This patch allows them to be used for read-only ttms allocated from the
kernel, so that applications can over-allocate buffers without forcing every
page to be allocated.
I'm hoping to use the dummy_read_page for kernel allocated buffers to avoid
allocating extra pages for read-only buffers (like vertex and batch buffers).
This also eliminates the 'write' parameter to drm_ttm_set_user and just
has DRM_TTM_PAGE_WRITE passed into drm_ttm_create.
Aside from changing drm_bind_ttm to drm_ttm_bind, this patch
adds only documentation and fixes the functions inside drm_ttm.c
to all be prefixed with drm_ttm_.
drmBOSetStatus does not bother to set the fence_class parameter.
Fortunately, drm_bo_setstatus_ioctl doesn't end up using it as it
calls drm_bo_handle_validate with use_old_fence_class = 1.
Document parameters and usage for drm_bo_handle_validate. Change parameter
order to match drm_bo_do_validate (fence_class has been moved to after
flags, hint and mask values). Existing users of this function have been
changed, but out-of-tree users must be modified separately.
Add comments about the parameters to drm_bo_do_validate, along
with comments for the DRM_BO_HINT options. Remove the 'do_wait'
parameter as it is duplicated by DRM_BO_HINT_DONT_BLOCK.
Creating a ttm was done with drm_ttm_init while destruction was done with
drm_destroy_ttm. Renaming these to drm_ttm_create and drm_ttm_destroy makes
their use clearer. Passing page_flags to the create function will allow that
to know whether user or kernel pages are needed, with the goal of allowing
kernel ttms to be saved for later reuse.
This header file is shared across linux and bsd, but is not installed
for user space to access. It's the place to put prototypes and data
types that aren't platform or chipset specific, but still internal to
the drm.
The vblank_init function wanted a couple of cleanups.
Also, drm_irq_install wasn't checking the new return value of irq_postinstall.
If it returns a failure, assume IRQs didn't get set up and take appropriate
action.
This mapping allows cached objects to be mapped in/out of the TT space
with the appropriate flushing calls.
It should put back the old CACHED functionality for snooped mappings
Conflicts:
linux-core/drmP.h
linux-core/drm_drv.c
linux-core/drm_irq.c
shared-core/i915_drv.h
shared-core/i915_irq.c
shared-core/mga_drv.h
shared-core/mga_irq.c
shared-core/radeon_drv.h
shared-core/radeon_irq.c
Merge in the latest master bits and update the remaining drivers (except
mach64 which math_b is working on). Also remove the 9xx hack from the i915
driver; it seems to be correct.
Add suspend/resume support to the i915 driver. Moves some of the
initialization into the driver load routine, and fixes up places where we
assumed no dev_private existed in some of the cleanup paths. This allows
us to suspend/resume properly even if X isn't running.
Make DRM devices use real Linux devices instead of class devices, which are
going away. While we're at it, clean up some of the interfaces to take
struct drm_device * or struct device * and use the global drm_class where
needed instead of passing it around.
Implement a version check IOCTL for drivers that don't use
drmMMInit from user-space.
Remove the minor check from the kernel code. That's really up
to the driver.
Bump major.
Remove need for lock for now.
May create races when we clean memory areas or on takedown.
Needs to be fixed.
Really do a validate on buffer creation in order to avoid problems with
fixed memory buffers.
We now always create a drm_ref_object for user objects and this is then the only
things that holds a reference to the user object. This way unreference on will
destroy the user object when the last drm_ref_object goes way.
The buffer object type is still tracked internally, but it is no longer
part of the user space visible ioctl interface. If the bo create ioctl
specifies a non-NULL buffer address we assume drm_bo_type_user,
otherwise drm_bo_type_dc. Kernel side allocations call
drm_buffer_object_create() directly and can still specify drm_bo_type_kernel.
Not 100% this makes sense either, but with this patch, the buffer type
is no longer exported and we can clean up the internals later on.
This isn't 100% as command submission via PCI-e GART buffers doesn't work.
I've hacked around that for the time being. This is essentially the code
that was used at the POWER.org event to show Bimini.
All nv30 functions in nv30_graph.c that can be used on nv20 are renamed
as accordingly. nv20 specific parts from nv20_graph.c are moved into
nv30_graph.c.
Modify the TTM backend bind arguments.
Export a number of functions needed for driver-specific super-ioctls.
Add a function to map buffer objects from the kernel, regardless of where they're
currently placed.
A number of error fixes.
This branch replaces the NO_MOVE/NO_EVICT flags to buffer validation with a
separate privileged ioctl to pin buffers like NO_EVICT meant before. The
functionality that was supposed to be covered by NO_MOVE may be reintroduced
later, possibly in a different way, after the superioctl branch is merged.
Previously any ioctls that weren't explicitly listed in the compat ioctl
table would fail with ENOTTY. If the incoming ioctl number is outside the
range of the table, assume that it Just Works, and pass it off to drm_ioctl.
This make the fence related ioctls work on 64-bit PowerPC.
The i830 and newer intel 2D code adds the AGP base to map offsets already,
because it wasn't doing the AGP enable which used to set dev->agp->base.
Credit goes to Zhenyu for finding the issue.
The original XGI kernel driver strobed 0xB03F each time a page was
allocated to back a GART page. When the driver was converted to use
the DRM SG interface, this code was lost. Returning it fixes a long
standing issue where the X-server would work fine the first time, but
acceleration commands would be ignored on the second X-server
invocation.
Since the heaps weren't marked as uninitialized, SG memory was never
re-allocated. This prevented the X-server from being able to restart
without re-loading the kernel module.
The DRM_XGI_PCIE_ALLOC and DRM_XGI_FB_ALLOC ioctls (and the matching
free ioctls) are unified to DRM_XGI_ALLOC. The desired memory region
is selected by xgi_mem_alloc::location. The region is magically
encoded in xgi_mem_alloc::index, which is used to release the memory.
Bump to version 0.11.0. This update requires a new DDX.
Pass the master's file pointer, as supplied to xgi_bootstrap, to
xgi_cmdlist_initialize. Associate that pointer with the memory
allocated for the command list buffer. By doing this the memory will
be automatically cleaned up when the master closes the device. This
allows the removal of some clean up code.
1. DRM_NOUVEAU_GPUOBJ_FREE
Used to free GPU objects. The obvious usage case is for Gr objects,
but notifiers can also be destroyed in the same way.
GPU objects gain a destructor method and private data fields with
this change, so other specialised cases (like notifiers) can be
implemented on top of gpuobjs.
2. DRM_NOUVEAU_CHANNEL_FREE
3. DRM_NOUVEAU_CARD_INIT
Ideally we'd do init during module load, but this isn't currently
possible. Doing init during firstopen() is bad as X has a love of
opening/closing the DRM many times during startup. Once the
modesetting-101 branch is merged this can go away.
IRQs are enabled in nouveau_card_init() now, rather than having the
X server call drmCtlInstHandler(). We'll need this for when we give
the kernel module its own channel.
4. DRM_NOUVEAU_GETPARAM
Add CHIPSET_ID value, which will return the chipset id derived
from NV_PMC_BOOT_0.
4. Use list_* in a few places, rather than home-brewed stuff.
When the GE is shut down, an empty command packet without a begin-link
must be sent. After this command is sent, wait for the hardware to go
idle. Finally, turn off the GE and disable MMIO.
This should let us allocate buffers without holding the hardware lock.
While here, add DRM_DEBUG info for the drm_bo ioctls, so you can see something
more specific than just the cmd value per ioctl.
The core DRM lastclose routine automatically destroys all mappings and
releases SG memory. XP10 DRM and DDX assumed this data stayed around
until module unload. xgi_bootstrap was reworked to recreate all these
mappings. In addition, the drm_addmap for the GART backing store was
moved into the kernel. This causes a change to the ioctl protocol and
a version bump.
Based on review comments from airlied, XGI_CHECK_PCI_CONFIG is
removed. He believes (and I tend to agree) that this is a largely
unnecessary workaround for a bug elsewhere.
There were numerous unnecessary fields in xgi_cmd_info. The remaining
fields had pretty crummy names. Cut out the cruft, and rename the
rest. As a result, the unused parameter "triggerCounter" to
triggerHWCommandList can be removed.
Debug print fix in drm_release().
Forgotten local variable init in drm_setversion().
Unnecessary put_user() in drm_addmap_ioctl().
ioctl->cmd check broken in drm_ioctl(); workaround.
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
This was used to make all ioctl handlers return -errno on linux and errno on
*BSD. Instead, just return -errno in shared code, and flip sign on return from
shared code to *BSD code.
Generate the begin command once in a temporary buffer. Then,
depending on whether the command is to be written directly to the
hardware or to a secondary buffer, copy to command to the correct place.
Moved the getCurBatchBeginPort before its only caller. Modified
function to return the command ID instead of the port offset.
Function also now assumes input begin type is value.
Added code to ioctl handler to validate begin type.
xgi_cmdlist_initialize wasn't correctly checking for errors from
xgi_pcie_alloc. Furthermore, xgi_bootstrap, the one caller of
xgi_cmdlist_initialize, wasn't check its return value.
For reasons that I don't understand, the drm_addmap call would succeed
in xgi_driver_load, but writes to the map later would oops. Moving it
to xgi_bootstrap fixes this problem.
Dave Airlie
Keith Packard
Jesse Barnes
Jesse Barnes
Thomas Hellstrom
Jesse Barnes
Dave Airlie
Kyle McMartin
Zhenyu Wang
Zou Nan hai
Ben Skeggs
Pekka Paalanen
Márton Németh
Xiang, Haihao
Alan Hourihane
Robert Noland
Jerome Glisse
Jeremy Kolb
Kristian Høgsberg
Patrice Mandin
Li Zefan
Dave Airlie
Kristian Høgsberg
Ian Romanick
Roel Kluin
Michel Dänzer
Arthur Huillet
Maarten Maathuis
Keith Packard
Alan Hourihane
Eric Anholt
Brian
Dave Airlie
Dave Airlie
Adrian Bunk
Dave Airlie