This interface was defined completely wrong, however userspace has only
ever used 4 values from it (0x1, 0x2, 0x3 and 0x6), so fix the interface to do what userspace actually expected but define new defines for new users to use
it properly.
Previously, the R300_CMD_WAIT command would write the passed directly to the
hardware. However this is incorrect because the R300_WAIT_* values used are
internal interface values that do not map directly to the hardware.
The new function I have added translates the R300_WAIT_* values into appropriate
values for the hardware before writing the register.
Thanks to John Bridgman for pointing this out. :-)
More or less a workaround for issues on some chipsets where a context
switch results in critical data in PRAMIN being overwritten by the GPU.
The correct fix is known, but may take some time before it's a feasible
option.
This is the correct fix for the RS690 and hopefully the dma coherent work.
For now we limit everybody to a 32-bit DMA mask but it is possible for
RS690 to use a 40-bit DMA mask for the GART table itself,
and the PCIE cards can use 40-bits for the table entries.
Signed-off-by: Dave Airlie <airlied@redhat.com>
DMA command submission. It's worth remembering that all new bright ideas on how
to make this command reader work properly and according to docs
will probably fail :( Bring in some old code.
If we ever want to be able to use the 3D engine we have no choice. It
appears that the tiling setup (required for 3D on G8x) is in the page tables.
The immediate benefit of this change however is that it's now not possible
for a client to use the GPU to render over the top of important engine setup
tables, which also live in VRAM.
G8x VRAM size is limited to 512MiB at the moment, as we use a 1-1 mapping
of real vram pages to their offset within the start of a channel's VRAM
DMA object and only populate a single PDE for VRAM use.
Conflicts:
linux-core/drm_compat.c
linux-core/drm_compat.h
linux-core/drm_ttm.c
shared-core/i915_dma.c
Bump driver minor to 13 due to introduction of new
relocation type.
My 965GM gets interrupts stuck when using the old PIPE_VBLANK interrupt.
Switch to the PIPE_EVENT interrupt mechanism, and set the PIPE*STAT
registers to use START_VBLANK on 965 and VBLANK on previous chips.
Will hopefully work a bit better than previous code, which depended on
knowing the channel's most recent PUT value. Some chips always return
0 on reading these regs, and currently userspace is the only other entity
which knows the value.
This change adds a driver feature that for i915 is controlled by a module
parameter. You now need to do insmod i915.ko modeset=1 to enable it the
modesetting paths.
It also fixes up lots of X paths. I can run my new DDX driver on this code
with and without modesetting enabled
Texture uploads could hit the blitter coordinate limit, adjust the texture
offset when uploading the pieces. Make sure to check the end address of the
upload too.
Make sure we have enough room for all the GR registers or we'll end up
clobbering the AR index register (which should actually be harmless
unless the BIOS is making an assumption about it).
On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time. So save/restore them properly.
We need to return an accurate vblank count to the callers of
->get_vblank_counter, and in the Intel case the actual frame count
register isn't udpated until the next active line is displayed, so we
need to return one more than the frame count register if we're currently
in a vblank period.
However, none of the various ways of doing this is working yet, so
disable the logic for now. This may result in a few missed events, but
should fix the hangs some people have seen due to the current code
tripping the wraparound logic in drm_update_vblank_count.
The frame count registers don't increment until the start of the next
frame, so make sure we return an incremented count if called during the
actual vblank period.
Ack the IRQs correctly (PIPExSTAT first followed by IIR). Don't read
vblank counter registers on disabled pipes (might hang otherwise). And
deal with flipped pipe/plane mappings if present.
This is necessary for AGP to work after running bios init scripts on nv3x, and
is seen in mmio traces of all cards (nv04-nv4x)
I'm not making the equivalent change to nv40_mc.c, as early cards (6200, 6800gt)
use the 0x000018XX PBUS and later cards use the 0x000880XX PBUS and I don't know
the effects of using the wrong one
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see
drivers/char/drm/drmP.h), it is not worth doing this again. At some
other places the ending "\n" was added.
airlied:- I cleaned up a few that this patch missed also
Flags pending validation were stored in a misleadingly named field, 'mask'.
As 'mask' is already used to indicate pieces of a flags field which are
changing, it seems better to use a name reflecting the actual purpose of
this field. I chose 'proposed_flags' as they may not actually end up in
'flags', and in an case will be modified when they are moved over.
This affects the API, but not ABI of the user-mode interface.
drivers/char/drm/mga_dma.c::mga_do_cleanup_dma() and I think there's a small
problem.
The variable is only used inside #if __OS_HAS_AGP which is fine, but all
that
ever happens is an assignment to the variable - it is never actually used
for
anything. The variable is nicely initialized to zero which is also what the
return statement at the end of function returns (always at the moment).
It looks to me like that function should be returning 'err' instead of
always
just returning 0. Here's a patch to do that.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Document parameters and usage for drm_bo_handle_validate. Change parameter
order to match drm_bo_do_validate (fence_class has been moved to after
flags, hint and mask values). Existing users of this function have been
changed, but out-of-tree users must be modified separately.
Add comments about the parameters to drm_bo_do_validate, along
with comments for the DRM_BO_HINT options. Remove the 'do_wait'
parameter as it is duplicated by DRM_BO_HINT_DONT_BLOCK.
One of the costs of superioctl has been the need to perform relocations
inside the kernel. The cost of mapping the buffers to the CPU and writing
data is fairly high, especially if those buffers have been mapped and read
by the GPU.
If we assume that buffers don't move around very often, we can have the
client compute the relocations itself using the previous GPU address. When
that object doesn't move, the kernel can skip computing and writing the
updated data.
Here's a patch which adds a new field to struct drm_bo_info_req called
'presumed_offset', and a new DRM_BO_HINT_PRESUMED_OFFSET that is set when
this field has been filled in by the client.
There are two separate optimizations performed when the presumed_offset is
correct:
1. i915_exec_reloc checks to see if all previous buffer offsets were guessed
correctly. If so, there's no need for it to look at *any* of the
relocations for a buffer. When this happens, it skips the whole
relocation process, simply returning success.
2. i915_apply_reloc checks to see if the target buffer offset was guessed
correctly. If so, it skips mapping the relocatee, computing the
relocation and writing the value. If no relocations are needed, the
relocatee should never be mapped to the CPU, and so the kernel shouldn't
need to wait for any fences to pass.
If drmMinor >= 6, the intel DDX driver will enable vblank events on both
pipes. If drmMinor >= 10 on pre-965 chipsets, the intel DDX driver will
swap the pipe<->plane mapping to allow for framebuffer compression on
laptop screens. This means the secondary vblank counter (corresponding
to pipe B) will be incremented when vblank interrupts occur.
Now Mesa waits for vblank events on whichever plane has a greater
portion of the displayed window. So it will happly ask to wait for the
primary counter even though that one won't increment.
So we can fix this in either the DDX driver, Mesa or the kernel (though
I thought we already had several times).
Since current (and previous) userspace assumes it's talking about a pipe
== plane situation and now uses planes when talking to the kernel, we
should probably just hide the mapping details there (indeed they already
are hidden there for vblank swaps), which this patch does.
So as far as userland is concerned, whether we call things planes or
pipes is irrelevant, as long as kernel developers understand that
userland hands them planes and they have to figure out which pipe that
corresponds to (which will typically be the same on 965+ hardware and
reversed on pre-965 mobile chips).
This should work on all radeon but there is still many things todo:
- add crtc2
- tmds
- lvds
- add bios data table so we don't need to hardcode dac/crtc infos
- separate clock control to make power saving easier & cleaner
- tiling (warning tiling shouldn't be enable in double scan or interlace)
- surface reg manager (this goes along with tiling)
- suspend/resume hook
- avivo & r500 family support
- atom bios support (for posting card mostly)
- finish superioctl skeleton
- what else ? :)
so really want to get a list of modes per output not the global hammer list.
also we remove the mode ids and let the user pass back the full mode description
need to fix up add/remove mode for user modes now
This allow the user to retrieve a list of properties for an output.
Properties can either be 32-bit values or an enum with an associated name.
Range properties are to be supported.
This API is probably not all correct, I may make properties part of the general
resource get when I think about it some more.
So basically you can create properties and attached them to whatever outputs you want,
so it should be possible to create some generics and just attach them to every output.
This header file is shared across linux and bsd, but is not installed
for user space to access. It's the place to put prototypes and data
types that aren't platform or chipset specific, but still internal to
the drm.
This patch is originally from malc0_, but since it used some NV40_*
regs, I edited them into hex values with a comment.
This seems to correspond quite well with my own mmio-trace,
for the parts I cared to check.
Maarten Maathuis
Jerome Glisse
Dave Airlie
Oliver McFadden
Stuart Bennett
Ben Skeggs
Alex Deucher
Alex Deucher
Dave Airlie
Dave Airlie
Thomas Hellstrom
Alex Deucher
Alan Hourihane
Keith Packard
Xiang, Haihao
Eric Anholt
Zou Nan hai
Alan Hourihane
Roland Scheidegger
Kristian Høgsberg
Stephane Marchesin
Jesse Barnes
Jesse Barnes
Jakob Bornecrantz
Mirko
Maciej Cencora
George Sapountzis
Jesse Barnes
Zhenyu Wang
Jeremy Kolb
Xavier Bachelot
Márton Németh
Li Zefan
Jesper Juhl
Patrice Mandin
José Fonseca
Robert Noland
Robert Noland
Jiri Slaby
Dave Airlie
Robert Noland
Kristian Høgsberg
Pekka Paalanen
Jeremy Kolb