Issue slow copy linear for sdma to trigger SDMA hang test.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
v2:
- remove dec create/destroy msg as its not relevant to jpeg (Leo)
- enable the test for jpeg2/jpeg3 (Leo)
- validate checksum of result (Leo)
- add appropriate comments (Leo)
v3:
- linux style function definition indent (James)
- use multiline comment delimiter (Leo)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
<linux/limits.h> should be included conditionally for Linux only, also
SPECNAMELEN used conditionally when the OS is FreeBSD requires to
include <sys/params.h>.
Signed-off-by: Eleni Maria Stea <elene.mst@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Disconnect device while fence is exported.
Also disable this test for sytem with single GPU.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Add plug/unplug device and open/close device file
infrastructure.
Add basic test - unplug device while device file still
open. Close device file afterwards and replug the device.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
Expose close device and add open device wich preserves
test index.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher alexander.deucher@amd.com
This reverts commit a5a400c958.
Bo evict test was disabled by default per below commit.
So still keep it as disabled.
1f6a85cc test/amdgpu: disable bo eviction test by default
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
On Raven2/Picasso, the default VRAM size is 2048M,
and the default GTT size is 3072M. If max_allocation
of VRAM exceeds half of GTT size, GTT memory can't
hold evicted bo from VRAM and bo in itself at the
same time. Then amdgpu_cs_list_validate will failed
with "Not enough memory for command submission" error.
NOTE:
The installed DRAM should be larger than 8GB,
if the VRAM size is 2048M.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
The unit of size_metadata is one byte not four bytes.
Enable Metadata test.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
This patch enables security suite tests.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add a new test suite to store security tests.
In Raven+ asics, it will support TMZ (trust memory zone), and it is
page-based protection feature.
v2: remove tests/amdgpu/Makefile.am and update to
tests/amdgpu/meson.build
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Proper format for command line option "-l",
listing the supported and unsupported tests:
1) Add an aligned column header.
2) Align all fields into columns.
3) Fixed length fields, come before the last
column, which is a variable length field.
4) Variable length field, which is the name of the
test, goes in the last column.
5) If a suite is disabled, do not iterate over its
tests, as they'd naturally be all disabled.
Now the output looks like this:
$sudo ./amdgpu_test -l
What: ID: Status: Name
Suite: 1: ENABLED: Basic Tests
Test: 1: ENABLED: Query Info Test
Test: 2: ENABLED: Userptr Test
Test: 3: DISABLED: bo eviction Test
Test: 4: ENABLED: Command submission Test (GFX)
Test: 5: ENABLED: Command submission Test (Compute)
Test: 6: ENABLED: Command submission Test (Multi-Fence)
Test: 7: ENABLED: Command submission Test (SDMA)
Test: 8: ENABLED: SW semaphore Test
Test: 9: DISABLED: Sync dependency Test
Test: 10: DISABLED: Dispatch Test (Compute)
Test: 11: DISABLED: Dispatch Test (GFX)
Test: 12: DISABLED: Draw Test
Test: 13: DISABLED: GPU reset Test
Suite: 2: ENABLED: BO Tests
Test: 1: ENABLED: Export/Import
Test: 2: DISABLED: Metadata
Test: 3: ENABLED: CPU map/unmap
Test: 4: ENABLED: Memory alloc Test
Test: 5: ENABLED: Memory fail alloc Test
Test: 6: ENABLED: Find bo by CPU mapping
Suite: 3: DISABLED: CS Tests
Suite: 4: DISABLED: VCE Tests
Suite: 5: ENABLED: VCN Tests
Test: 1: ENABLED: VCN DEC create
Test: 2: ENABLED: VCN DEC decode
Test: 3: ENABLED: VCN DEC destroy
Test: 4: ENABLED: VCN ENC create
Test: 5: ENABLED: VCN ENC decode
Test: 6: ENABLED: VCN ENC destroy
Suite: 6: DISABLED: UVD ENC Tests
Suite: 7: DISABLED: Deadlock Tests
Suite: 8: ENABLED: VM Tests
Test: 1: ENABLED: resere vmid test
Test: 2: ENABLED: unaligned map
Test: 3: ENABLED: vm mapping test
Suite: 9: DISABLED: RAS Tests
Suite: 10: ENABLED: SYNCOBJ TIMELINE Tests
Test: 1: ENABLED: syncobj timeline test
$_
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The computer ring test name mis-match in different files,
thus may be set with TRUE on wrong platforms.
Change-Id: I0b918ff8faf08c9c9f1ad55f4dcd18f66b956901
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
ASIC hang randomly.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. perform gpu reset
2. perform dispatch test to verify gpu reset to a good state
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
v2: drop DRM_SYNCOBJ_CREATE_TYPE_TIMELINE, fix timeout calculation,
fix some warnings
v3: add export/import and cpu signal testing cases
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Saw a couple of typos fixes in the patch DragonFlyBSD carries [1], so
I ran codespell (a spell checker for code) on the whole repo.
[1] https://github.com/DragonFlyBSD/DPorts/blob/master/graphics/libdrm/files/patch-xf86drm.c
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
add memset draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset dispatch test for gfx9
v2: disable dispatch test for other ASICs
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
deadlock test for sdma will cause gpu recoverty.
disable the test for now until GPU reset recovery could survive at least
1000 times test.
v2: add modprobe parameter
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Illegal access will cause CP hang followed by job timeout and
recovery kicking in.
Also, disable the suite for all APU ASICs until GPU
reset issues for them will be resolved and GPU reset recovery
will be enabled by default.
v2:
Add KV to deasbled APUs list and add comments regarding
necessary kernel amdgpu paramteres to run the tests.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This will prevent any more missing `#include "config.h"` bug, at the
cost of having to recompile some files that didn't need to be when
changing build options.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
if some system has no swap space and memory is less, than the test
could fail.
And bo eviction test takes much more time in some system, which effects
automation test result and efficiency.
So disable it by default now, only be used by developer manually.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
The test is as following:
1) Create context A & B
2) Send a command submission using context A which fires up a compute shader.
3) The shader wait a bit and then write a value to a memory location.
4) Send a command submission using context B which writes another value to the same memory location, but having an explicit dependency on the first command submission.
5) Wait with the CPU for both submissions to finish and inspect the written value.
Test passes if the value seen in the memory location after both submissions is from command B.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Disable the test instead of doing #ifdef 0
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The test stalls the CP, until RCA is done the test is
disabled to not disrupt regression testing.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Switch from disabling tests during run to using the new disable
API.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Suits are diasbled based on hooks they provide (e.g incompatible
ASIC or missing blocks). Single tests are diasbled explicitly.
Suit or test can be forced to execute even if disabled by adding -f
flag after specifying suit [test] ids.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The test will Reserve a VMID, submit a command and
unreserve the VMID.
v2:
Wrappers names were changed.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Adding initial tests for locks detection when SW
scheduler FIFO is full.
The test works by submitting a batch of identical commands which make the CP
stall waiting for condition to become true. The condition is later satisfied
form a helper thread. Other events that happen during this time
might create deadlock situations. One such example is GPU reset
triggered by this stall when amdgpu_lockup_timeout != 0.
v2:
Increase the delay from 2 to 100 ms.
Comment out the compute test until it's working.
Typos fix.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher at amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
The device_id option [-d] was badly broken. This commit fixes
the width (was 8 is now 16 bits) as well as enables searches
without specifying a bus id. It was also comparing "dev" from
the bus field which is not the PCI device id.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Tested:
1. As root, tests passed on primary.
2. As root, tests passed on render node.
BO export/import test was skipped
3. As non-privileged user, tests failed on primary as expected.
4. As non-privileged user, tests passed on render node.
BO export/import test was skipped
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be used to test multiple GPUs
v2: Use PCI bus ID and optional PCI device ID to choose device
Add an option to display information of AMDGPU devices
Tested:
./amdgpu_test -p
./amdgpu_test
./amdgpu_test -b 1 #fail as expected
./amdgpu_test -b 6 #pass
./amdgpu_test -b -d 1 #fail as expected
./amdgpu_test -b -d 0 #pass
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify the vender ID and driver name.
Open all AMDGPU devices.
Provide an option to open render node.
Tested as root: PASS
Tested as non-privileged user:
All tests failed as expected
v2: Return value in the ene of function amdgpu_open_devices.
Check the return value of amdgpu_open_devices.
amdgpu_test is not for USB device for the time being.
Get the name of node from function drmGetDevices2.
Drop the legacy drmAvailable() from the test.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the latest version of CUnit the fourth parameter of the CU_SuiteInfo
struct is pSetUpFunc rather than *pTests.
Seems like the CUnit ABI broke at some point, so let's the the robust
thing and use c99 designated initializers to correctly populate the
struct(s).
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Likun Gao
Lu Jiacheng
Sathishkumar S
Eleni Maria Stea
Andrey Grodzovsky
Lang Yu
Aaron Liu
Huang Rui
Le Ma
Luben Tuikov
Yifan Zhang
Flora Cui
Chunming Zhou
Eric Engestrom
xinhui pan
Eric Engestrom
Michel Dänzer
Boyuan Zhang
Tom St Denis
Leo Liu
Alex Xie
Emil Velikov