Since Arcturus has no gfx pipeline(CPG), cases below is not suitable:
- Command submission Test (GFX)
- Command submission Test (Multi-Fence)
- Sync dependency Test
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since Arcturus has no gfx engine, add function to blacklist gfx related test.
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is workaround of firmware issue, and the change has no impact
on the legacy HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
It is not used for VCN from VCN1, but VCN3 use it
for other feature, so clear it, because we don't
use the feature for now
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
VCN3.0 has its own set of internal regs
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
This option finds all connected connector and then sets its preferred
mode on it. If no preferred mode is available, first mode is used.
This option must be set w/o any mode or plane.
This allows for a quick test on all connected outputs.
Loosely based on the work by Ezequiel Garcia <ezequiel@collabora.com>
Changes since Ezequiel's work:
- implement atomic codepath
- set all connectors
- pick correct crtc
- don't set -r by default
- nearly identical output in atomic and non-atomic codepaths
v2:
- Use the crtc->crtc_id, instead of the plane's current crtc_id
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code a tiny bit more symmetrical.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The very final drmModeAtommicCommit tears down the existing mode/plane
setup. Following it we clean up other misc state laying around.
Chances are that it will not fail, but in the extremely unlikely case it
does, there's nothing one can do.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the hunk of code into a function, making the overall flow easier to
follow and providing some symmetry to the non-atomic path.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The function is closely related to pipe_find_crtc_and_mode() so we might
as well keep them together.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Move the function above set_mode, since we'll be using it from there as
of next commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Instead of duplicating the exact same code across the two functions,
fold them into one.
For some strange reason git diff may show atomic_clear_mode() as changed
The function in untouched, despite the misleading output.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Makes the code shorter and easier to read.
Currently if the user has not set the crtc_id, we fetch the crtc yet do
not "bother" setting the id - do so.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Let's make the code shorter, this avoid crashes (when drmModeGetCrtc()
fails) by using a couple of helpers. As get_resources() considers the
drmModeGetCrtc() fail non-fatal, we might as well handle it properly.
v2: Add a comment above the unreachable abort() (Eze)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
There's no point in keeping these around since we already fetch the
complete data set. Add respective count_ variables and greatly simplify
the existing code.
Extra brownie points for:
- using the inverse order in free_resources()
- don't memory leak the connector properties
- free the properties themselves, instead of only the objects
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Flesh out the bo_create + drmModeAddFB2 dance into a helper and use it.
Currently we're duplicating that in 4 places, many of which leaking et
al.
As a bonus point this highlights that the atomic_set_plane() seems tad
buggy. That'll be fixed with separate commit.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Don't bother opening the device node, if the args combination is invalid
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
The two functions have been stubs for ages. The alluded generic ioctls
never came to be, assumingly because all new drivers support those.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Renoir is the same family as Raven, but it's with VCN2.0,
so it has to use VCN2.0 reg set
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-By: Thong Thai <thong.thai@amd.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Alex Deucher alexander.deucher@amd.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Just like the other tests (tools really) install drmdevice. It is a
simple tool which is useful for basic check/testing.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
FreeBSD also use (int, unsigned long int, ...) like GLIBC.
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Suggested by Emil [1]:
> Feel free to drop the random test altogether. It's an old public API
> no active users (pretty ancient code uses it) and the in-tree users
> drmSL and drmHash already have respective tests.
This test takes minutes to run, while all the other tests combined take
barely more than a second.
Dropping it also helps the CI by avoiding random timeouts when `random`
takes more than the 4 minutes (!) we've allowed for it.
[1] https://gitlab.freedesktop.org/mesa/drm/merge_requests/26#note_390066
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Combined with -Wundef (added in 75758d2ccf & enforced in ba17673eed),
this provides absolute safety against #ifdef typos.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
When a mode is set with just a connector "-s foo",
we get a nasty segmentation fault. Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Often there are many similar modes, which cannot be selected
via modetest due to its simple string matching.
This change adds a mode index in the display output, which can
then be used to specify a specific modeline to be set.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: John Stultz <john.stultz@linaro.org>
[emil: rebase]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This patch fixes the following warning:
-Wformat-overflow=
v2: Use the correct strlcat(3).
v3: Use strncat(3) and remove libbsd dependency.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warnings:
-Wformat=
-Wmaybe-uninitialized
-Wmisleading-indentation
-Wstringop-truncation
-Wunused-function
-Wunused-variable
It also removes forward declarations and moves
global functions to the bottom, keeping locals
at the top, in ras_tests.c.
v2: Fix compilation.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Proper format for command line option "-l",
listing the supported and unsupported tests:
1) Add an aligned column header.
2) Align all fields into columns.
3) Fixed length fields, come before the last
column, which is a variable length field.
4) Variable length field, which is the name of the
test, goes in the last column.
5) If a suite is disabled, do not iterate over its
tests, as they'd naturally be all disabled.
Now the output looks like this:
$sudo ./amdgpu_test -l
What: ID: Status: Name
Suite: 1: ENABLED: Basic Tests
Test: 1: ENABLED: Query Info Test
Test: 2: ENABLED: Userptr Test
Test: 3: DISABLED: bo eviction Test
Test: 4: ENABLED: Command submission Test (GFX)
Test: 5: ENABLED: Command submission Test (Compute)
Test: 6: ENABLED: Command submission Test (Multi-Fence)
Test: 7: ENABLED: Command submission Test (SDMA)
Test: 8: ENABLED: SW semaphore Test
Test: 9: DISABLED: Sync dependency Test
Test: 10: DISABLED: Dispatch Test (Compute)
Test: 11: DISABLED: Dispatch Test (GFX)
Test: 12: DISABLED: Draw Test
Test: 13: DISABLED: GPU reset Test
Suite: 2: ENABLED: BO Tests
Test: 1: ENABLED: Export/Import
Test: 2: DISABLED: Metadata
Test: 3: ENABLED: CPU map/unmap
Test: 4: ENABLED: Memory alloc Test
Test: 5: ENABLED: Memory fail alloc Test
Test: 6: ENABLED: Find bo by CPU mapping
Suite: 3: DISABLED: CS Tests
Suite: 4: DISABLED: VCE Tests
Suite: 5: ENABLED: VCN Tests
Test: 1: ENABLED: VCN DEC create
Test: 2: ENABLED: VCN DEC decode
Test: 3: ENABLED: VCN DEC destroy
Test: 4: ENABLED: VCN ENC create
Test: 5: ENABLED: VCN ENC decode
Test: 6: ENABLED: VCN ENC destroy
Suite: 6: DISABLED: UVD ENC Tests
Suite: 7: DISABLED: Deadlock Tests
Suite: 8: ENABLED: VM Tests
Test: 1: ENABLED: resere vmid test
Test: 2: ENABLED: unaligned map
Test: 3: ENABLED: vm mapping test
Suite: 9: DISABLED: RAS Tests
Suite: 10: ENABLED: SYNCOBJ TIMELINE Tests
Test: 1: ENABLED: syncobj timeline test
$_
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warning:
-Wformat-overflow=
v2: Use the correct strlcat(3).
v3: Use strncat(3) and remove libbsd dependency.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
This patch fixes the following warnings:
-Wformat=
-Wmaybe-uninitialized
-Wmisleading-indentation
-Wstringop-truncation
-Wunused-function
-Wunused-variable
It also removes forward declarations and moves
global functions to the bottom, keeping locals
at the top, in ras_tests.c.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The computer ring test name mis-match in different files,
thus may be set with TRUE on wrong platforms.
Change-Id: I0b918ff8faf08c9c9f1ad55f4dcd18f66b956901
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Add function to derive floating value of vertical
refresh rate from drm mode using pixel clock,
horizontal total size and vertical total size.
Use this function to find suitable mode having vrefresh
value which is matching with user provided vrefresh value.
If user doesn't provide any vrefresh value in args then
update vertical refresh rate value in pipe args using this
function.
Also use this function for printing floating vrefresh while
dumping all available modes.
This will give more accurate picture to user for available modes
differentiated by floating vertical refresh rate and help user
select more appropriate mode using suitable refresh rate value.
V4:
1) While setting mode, print mode name and vrefresh using struct
drmModeModeInfo instead of struct pipe_args.
2) Revert back to using a float value instead of float *
for vrefresh arg in connector_find_mode().
V3:
1) Change name of function used to derive refresh rate.
V2:
1) Don't use inline function for deriving refresh rate from mode.
2) If requested mode not found, print refresh rate only
if user had provided it in args.
Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
It can run dispatch/draw tests on new renoir chips. So it needs to
enable dispatch/draw tests for Renoir again.
Change-Id: I3a72a4bbfe0fc663ee0e3e58d8e9c304f513e568
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Userptr Test will fail on PAGE_SIZE bigger than BUFFER_SIZE(8 * 1024)
Signed-off-by: xinxu <xinxu@loongson.cn>
(cherry picked from commit fb7dfdc5fb58795365b70117c3eb625f2edb8f06)
For the scenario where user may require to modeset with a mode
supporting a fractional value for vertical refresh-rate,
appropriate mode can be selected by searching for mode
having matching fractional vertical refresh rate using
below equation.
vrefresh = (1000 * pixel clock) / (htotal * vtotal) Hz.
We do this way since driver doesn't return float value of vrefresh
as it use int for vrefresh in struct drm_mode_info, but we can derive
the actual value using pixel clock, horizontal total size and
vertical total size values.
So for e.g. if user want to select mode having 59.94 Hz as refresh rate
then with this patch it be can done as shown in below command,
given there is an appropriate mode is available :
modetest -M xlnx -s 39:1920x1080-59.94@BG24 -v
NOTE: Above command was tested on xilinx DRM driver with DP
monitor which was supporting mode having 59.94 Hz refresh rate.
V2: Update commit message
V3: Update with below changes as per review comments :
1) Use epsilon for vrefresh comparison
2) Use implicit type-casting wherever possible
V4: Keep patch version history on main commit message
Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
When running ras inject test, it's needed to be aligned
with kernel's ras enablement.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both UMC and GFX ras single_correctable
inject tests are added.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Except CUnit library, no additional external
library should be needed when compiling amdgpu_test.
This will keep this binary self containing.
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ras inject test framework is invalid with original codes,
so refine it to make it work on top of kernel ras inject
feature enablement.
Signed-off-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for better clarification
v2: accordingly change dispatch_test caller in gpu_reset test
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASIC hang randomly.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. perform gpu reset
2. perform dispatch test to verify gpu reset to a good state
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
1. skip test if there's no desired ring
2. clear shader buffer
3. update command buffer for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Make it actually clear the LUT.
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of hacking the binary every time, we can now specify directly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This includes logic to configure the LUT accordingly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
As new features are added and others are declared to be legacy, it's
nice to be able to implement fallbacks. As such, create a
property-setting variant that does not generate errors which can very
well be entirely expected.
Will be used for gamma control in a future change.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This change adds support for all current patterns.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The idea is to have a horizontal pattern split into two with the top and
bottom halves having different precision. This allows one to see whether
10bpc support is working properly or not, as there are many pieces to
the puzzle beyond the basic format support (gamma ramps, bpc encodings,
etc).
This is really only useful on 10bpc formats, but we also add support for
8bpc formats to ease testing. In the future, this could be applied to
16bpc formats as well.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We need to shift the values up, otherwise we'd end up with a negative
shift. This works for up-to 16-bit components, which is fine for now.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This also adds a helper to generate a color LUT, which has to be used in
conjunction with the C8 indexed format.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
With different register offsets from VCN1.0
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Feature is controlled by DRM_CAP_SYNCOBJ_TIMELINE drm capability.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: drop DRM_SYNCOBJ_CREATE_TYPE_TIMELINE, fix timeout calculation,
fix some warnings
v3: add export/import and cpu signal testing cases
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The pointer p aquired with drmModeGetPlane() is not free in error
path. Fix possible memory leak by calling drmModeFreePlane() in
the error path.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
This makes the test utilities work with the Armada driver without the
necessity of using the -M argument.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Saw a couple of typos fixes in the patch DragonFlyBSD carries [1], so
I ran codespell (a spell checker for code) on the whole repo.
[1] https://github.com/DragonFlyBSD/DPorts/blob/master/graphics/libdrm/files/patch-xf86drm.c
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
struct drmPciBusInfo has been aligned to 6 bytes. So memcmp will access
the last byte which is not initialized.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support per device test mask. Skip inject test on non-server card.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memcpy draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memcpy dispatch test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset dispatch test for gfx9
v2: disable dispatch test for other ASICs
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
deadlock test for sdma will cause gpu recoverty.
disable the test for now until GPU reset recovery could survive at least
1000 times test.
v2: add modprobe parameter
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just make them properly i.e. put 0 to the Nop reg
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the kernel doesn't crash if we map something at the minimum/maximum address.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Error message was invalid too, negative values aren't the number of
devices, they're errno error codes.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Since only for those ASICs gpu reset is enabled by deafult.
Also update disable message and fix identation .
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Le Ma
Leo Liu
Emil Velikov
Emil Velikov
Peter Seiderer
Emmanuel Vadot
James Zhu
Michel Dänzer
Eric Engestrom
Eric Engestrom
Ezequiel Garcia
John Stultz
Luben Tuikov
Marek Olšák
Yifan Zhang
Devarsh Thakkar
Flora Cui
changzhu
Ross Burton
xinxu@loongson.cn
Nirmoy Das
Guchun Chen
Ilia Mirkin
Chunming Zhou
Seung-Woo Kim
Lubomir Rintel
Fritz Koenig
Pan, Xinhui
Andrey Grodzovsky
Christian König