Conflicts:
linux-core/drmP.h
linux-core/drm_bo.c
linux-core/drm_drv.c
linux-core/drm_objects.h
shared-core/drm.h
shared-core/i915_dma.c
shared-core/i915_drv.h
shared-core/i915_irq.c
Mostly removing typedefs that snuck into the modesetting code and
updating to the latest TTM APIs. As of today, the i915 driver builds,
but there are likely to be problems, so debugging and bugfixes will
come next.
Modify the TTM backend bind arguments.
Export a number of functions needed for driver-specific super-ioctls.
Add a function to map buffer objects from the kernel, regardless of where they're
currently placed.
A number of error fixes.
This branch replaces the NO_MOVE/NO_EVICT flags to buffer validation with a
separate privileged ioctl to pin buffers like NO_EVICT meant before. The
functionality that was supposed to be covered by NO_MOVE may be reintroduced
later, possibly in a different way, after the superioctl branch is merged.
Previously any ioctls that weren't explicitly listed in the compat ioctl
table would fail with ENOTTY. If the incoming ioctl number is outside the
range of the table, assume that it Just Works, and pass it off to drm_ioctl.
This make the fence related ioctls work on 64-bit PowerPC.
The i830 and newer intel 2D code adds the AGP base to map offsets already,
because it wasn't doing the AGP enable which used to set dev->agp->base.
Credit goes to Zhenyu for finding the issue.
The original XGI kernel driver strobed 0xB03F each time a page was
allocated to back a GART page. When the driver was converted to use
the DRM SG interface, this code was lost. Returning it fixes a long
standing issue where the X-server would work fine the first time, but
acceleration commands would be ignored on the second X-server
invocation.
Since the heaps weren't marked as uninitialized, SG memory was never
re-allocated. This prevented the X-server from being able to restart
without re-loading the kernel module.
The DRM_XGI_PCIE_ALLOC and DRM_XGI_FB_ALLOC ioctls (and the matching
free ioctls) are unified to DRM_XGI_ALLOC. The desired memory region
is selected by xgi_mem_alloc::location. The region is magically
encoded in xgi_mem_alloc::index, which is used to release the memory.
Bump to version 0.11.0. This update requires a new DDX.
Pass the master's file pointer, as supplied to xgi_bootstrap, to
xgi_cmdlist_initialize. Associate that pointer with the memory
allocated for the command list buffer. By doing this the memory will
be automatically cleaned up when the master closes the device. This
allows the removal of some clean up code.
1. DRM_NOUVEAU_GPUOBJ_FREE
Used to free GPU objects. The obvious usage case is for Gr objects,
but notifiers can also be destroyed in the same way.
GPU objects gain a destructor method and private data fields with
this change, so other specialised cases (like notifiers) can be
implemented on top of gpuobjs.
2. DRM_NOUVEAU_CHANNEL_FREE
3. DRM_NOUVEAU_CARD_INIT
Ideally we'd do init during module load, but this isn't currently
possible. Doing init during firstopen() is bad as X has a love of
opening/closing the DRM many times during startup. Once the
modesetting-101 branch is merged this can go away.
IRQs are enabled in nouveau_card_init() now, rather than having the
X server call drmCtlInstHandler(). We'll need this for when we give
the kernel module its own channel.
4. DRM_NOUVEAU_GETPARAM
Add CHIPSET_ID value, which will return the chipset id derived
from NV_PMC_BOOT_0.
4. Use list_* in a few places, rather than home-brewed stuff.
When the GE is shut down, an empty command packet without a begin-link
must be sent. After this command is sent, wait for the hardware to go
idle. Finally, turn off the GE and disable MMIO.
This should let us allocate buffers without holding the hardware lock.
While here, add DRM_DEBUG info for the drm_bo ioctls, so you can see something
more specific than just the cmd value per ioctl.
The core DRM lastclose routine automatically destroys all mappings and
releases SG memory. XP10 DRM and DDX assumed this data stayed around
until module unload. xgi_bootstrap was reworked to recreate all these
mappings. In addition, the drm_addmap for the GART backing store was
moved into the kernel. This causes a change to the ioctl protocol and
a version bump.
Based on review comments from airlied, XGI_CHECK_PCI_CONFIG is
removed. He believes (and I tend to agree) that this is a largely
unnecessary workaround for a bug elsewhere.
There were numerous unnecessary fields in xgi_cmd_info. The remaining
fields had pretty crummy names. Cut out the cruft, and rename the
rest. As a result, the unused parameter "triggerCounter" to
triggerHWCommandList can be removed.
Debug print fix in drm_release().
Forgotten local variable init in drm_setversion().
Unnecessary put_user() in drm_addmap_ioctl().
ioctl->cmd check broken in drm_ioctl(); workaround.
The data is now in kernel space, copied in/out as appropriate according to the
This results in DRM_COPY_{TO,FROM}_USER going away, and error paths to deal
with those failures. This also means that XFree86 4.2.0 support for i810 DRM
is lost.
As a fallout, replace filp storage with file_priv storage for "unique
identifier of a client" all over the DRM. There is a 1:1 mapping, so this
should be a noop. This could be a minor performance improvement, as everything
on Linux dereferenced filp to get file_priv anyway, while only the mmap ioctls
went the other direction.
This was used to make all ioctl handlers return -errno on linux and errno on
*BSD. Instead, just return -errno in shared code, and flip sign on return from
shared code to *BSD code.
Generate the begin command once in a temporary buffer. Then,
depending on whether the command is to be written directly to the
hardware or to a secondary buffer, copy to command to the correct place.
Moved the getCurBatchBeginPort before its only caller. Modified
function to return the command ID instead of the port offset.
Function also now assumes input begin type is value.
Added code to ioctl handler to validate begin type.
xgi_cmdlist_initialize wasn't correctly checking for errors from
xgi_pcie_alloc. Furthermore, xgi_bootstrap, the one caller of
xgi_cmdlist_initialize, wasn't check its return value.
For reasons that I don't understand, the drm_addmap call would succeed
in xgi_driver_load, but writes to the map later would oops. Moving it
to xgi_bootstrap fixes this problem.
The ioctlss XGI_ESC_DEVICE_INFO, XGI_ESC_MEM_COLLECT,
XGI_ESC_PCIE_CHECK, XGI_ESC_GET_SCREEN_INFO, XGI_ESC_PUT_SCREEN_INFO,
XGI_ESC_MMIO_INFO, and XGI_ESC_SAREA_INFO, are completely unnecessary.
The will be doubly useless when the driver is converted to the DRM
infrastructure.
Most occurances of U32 were converted to u32. These are cases where
the data represents something that will be written to the hardware.
Other cases were converted to 'unsigned int'.
U32 was the last type in xgi_types.h, so that file is removed.
These two structures were used as the request and reply for certain
ioctls. Having a different type for an ioctl's input and output is
just wierd. In addition, each structure contained fields (e.g., pid)
that had no business being there.
This change requires updates to user-space.
Two large blocks of code were moved out of this function into separate
functions. This brought some much needed sanity to the indentation.
Some dead varaibles were removed.
Dave Airlie pointed out on IRC that idr_replace lets us know if the ID hasn't
been allocated, so we don't need a special pointer value for allocated IDs that
don't have valid information yet.
There's a difference between a drawable ID not having valid drawable
information and not being allocated at all. Not making the distinction would
break i915 DRM swap scheduling with older X servers that don't push drawable
cliprect information to the DRM.
The whole purpose of xgi_pcie_heap_check is to log information about
entries on the used_list. If XGI_DEBUG is not set, it doesn't print
anything. Therefore we can #ifdef the whole function body.
Convert open-code list iteration to use list_for_each_entry.
Comment in the code explains it. Basically, I put an if-statement
around a block of code to prevent a NULL pointer dereference that
should never happen in the first place. Eventually, this will need to
come out.
This function used to return 'void *', which was then cast to
'xgi_pcie_block_t *' at the only caller. I changed the return type to
'struct xgi_pcie_block_s *' and removed the explicit cast.
For various reasons, this ioctl was a bad idea.
At channel creation we now automatically create DMA objects covering
available VRAM and GART memory, where the client used to do this themselves.
However, there is still a need to be able to create DMA objects pointing at
specific areas of memory (ie. notifiers). Each channel is now allocated a
small amount of memory from which a client can suballocate things (such as
notifiers), and have a DMA object created which covers the suballocated area.
The NOTIFIER_ALLOC ioctl exposes this functionality.
- use a timer for disabling vblank events to avoid enable/disable calls too
often
- make i915 work with pre-965 chips again (would like to structure this
better, but this hack works on my test system)
Commit 9b01bd5b284bbf519b726b39f1352023cb5e9e69 introduced a
compat_ioctl handler for RADEON_SETPARAM, the sole purpose of which was
to handle the fact that on i386, alignof(uint64_t)==4.
Unfortunately, this handler was installed for _all_ 64-bit
architectures, instead of only x86_64 and ia64. And thus it breaks
32-bit compatibility on every other arch, where 64-bit integers are
aligned to 8 bytes in 32-bit mode just the same as in 64-bit mode.
Arnd has a cunning plan to use 'compat_u64' with appropriate alignment
attributes according to the 32-bit ABI, but for now let's just make the
compat_radeon_cp_setparam routine entirely disappear on 64-bit machines
whose 32-bit compat support isn't for i386. It would be a no-op with
compat_u64 anyway.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
If the driver doesn't support vertical blank interrupts, it won't call
drm_vblank_init(), and dev->num_crtcs will be 0.
Also fix an off-by-one test against dev->num_crtcs.
- use correct refcount variable in get/put routines
- extract counter update from drm_vblank_get
- make signal handling callback per-crtc
- update interrupt handling logic, drivers should use drm_handle_vblank
- move wakeup and counter update logic to new drm_handle_vblank routine
- fixup usage of get/put in light of counter update extraction
- fix longstanding bug in signal code, update pending counter only
*after* we're sure we'll setup signal handling
Introduce tile members for future tiled buffer support.
Allow user-space to explicitly define a fence-class.
Remove the implicit fence-class mechanism.
64-bit wide buffer object flag member.
This reverts commit 6e860d08d0.
As I said not a good plan - this macro will have to stay for now,
trying to do the vbl code with the inline was a bit messy - may need specialised
drm wait on functions
held across any operations that modify mode lists, crtc config, output
config, etc. It should be taken at high level entry points (currently just
initial config and user IOCTL).
Seems to work ok on my system, but needs more testing (with lockdep) and
review from some fresh eyes.
Conflicts:
linux-core/drm_crtc.c
linux-core/drm_fb.c
Lots of changes to merge with alanh's latest stuff:
o fix use of fb->pitch now that it has the right value
o add new helper for finding the CRTC given an FB
o fix new fb_probe/fb_remove functions to take a CRTC
o fixup callers of new FB routines
o port drm_fb changes to intel_fb
o check for errors after creating fb buffer object
o go back to using cfb_imageblit since the accel stubs aren't ready
places).
Add new FB hooks to the drm driver structure and make i915 use them for an
Intel specific FB driver. This will allow acceleration and better handling
of the command stream.
Change from DIRECTCOLOR to TRUECOLOR, and enable
support for PSEUDOCOLOR. DIRECTCOLOR support needs more work.
Add the ability to change the mode on the fbdev device.
Support depth 8, 15, 16 and 24 (and 32).
Add a /dev/fbX device per CRTC, but there's some code which
doesn't allocate the fbX device unless the output is actually
enabled. Read the code on this as it impacts the fbcon map flags.
Pick CRTC's based on the available outputs. More work could
be done here to match modes, so cloning could be achieved on
outputs. This fits more inline with what the X code does.
This just cleans up the xf86drm.c to what I want and drm.h,
I need to fix up the kernel internals to suit these changes now.
I've moved to using struct instead of typedefs for the bo and it doesn't look
that bad so I'll do the same thing for mm and fence..
The mode list sets all the output modes to UNVERIFIED, then probes a new list,
If a mode is on the new list and not on the old, it adds it to the old,
if a mode is on the new list and old, it just updates the status to the new
mode status.
If a mode is on the old list and not on the new, prune invalid modes should
remove all UNVERIFIED modes
VGA outs.
The drm_initial_config path has specific handling code to name
match for VGA, TMDS or LVDS. This is pretty restrictive and should
probably be dealt with to be more generic.
Check for the PENDING message when reading the attached
displays. Ensures the command has completed before continuing.
(probably need to check PENDING in other SDVO calls too)
When the kernel driver is loaded it sets up a lot of stuff..
it tears down the same stuff on unload.
This add a new map type called DRM_DRIVER which means the driver will clean the mapping up
and fix up the map cleaner
- allow drm_buffer_object_create to be called w/o dev_mapping
- fixup i915 init code to allocate memory, fb and set modes right
- pass fb to drm_initial_config for setup
- change some debug output to make it easier to spot
- fixup lvds code to use DDC probing correctly
- move EDID structures to drm_edid.h
- add EDID info structure to drm_output
- add a few routines to intel_display for getting current mode info
- add some prototypes to intel_drv.h and drm_crtc.h
The IGPGART setup code was traced using mmio-trace on fglrx by myself
and Phillip Ezolt <phillipezolt@gmail.com> on dri-devel.
This code doesn't let the 3D driver work properly as the card has no
vertex shader support.
Thanks to Matthew Garrett + Ubuntu for providing me some hardware to do this
work on.
- pull in FB DDC code (we'll have to rewrite it anyway it appears)
- add comments
- note a few FIXMEs
- make it less quiet, and more informative when it actually does print
This adds the user interfaces from Jakob and hooks them up for 3 ioctls
GetResources, GetCrtc and GetOutput.
I've made the ids for everything fbs, crtcs, outputs and modes go via idr as
per krh's suggestion on irc as it make the code nice and consistent.
The PGRAPH init for the various cards will need cleaning up at some point,
a lot of the values written there are per-context state left over from the
all the hardcoding done in the ddx.
It's possible some cards get broken by this commit, let me know.
Tested on: NV5, NV18, NV28, NV35, NV40, NV4E
Add refcounting of user waiters to the DRM hardware lock, so that we can use the
DRM_LOCK_CONT flag more conservatively.
Also add a kernel waiter refcount that if nonzero transfers the lock for the kernel context,
when it is released. This is useful when waiting for idle and can be used
for very simple fence object driver implementations for the new memory manager.
It also resolves the AIGLX startup deadlock for the sis and the via drivers.
i810, i830 still require that the hardware lock is really taken so the deadlock remains
for those two. I'm not sure about ffb. Anyone familiar with that code?
Memory types are either fixed (on-card or pre-bound AGP) or not fixed
(dynamically bound) to an aperture. They also carry information about:
1) Whether they can be mapped cached.
2) Whether they are at all mappable.
3) Whether they need an ioremap to be accessible from kernel space.
In this way VRAM memory and, for example, pre-bound AGP appear
identical to the memory manager.
This also makes support for unmappable VRAM simple to implement.
* Pulled in some registers from nv10reg.h. Needed for context switching.
* Filled in nv30 graphics context (based on nv40_graph.c).
* Figure out nv30 context table, set up on context creation. Allows the cards automatic switching to work.
This comes from the Re: [patch] paravirt: isolate module ops on lkml
It needs some testing, please report any regressions caused.
Signed-off-by: Dave Airlie <airlied@linux.ie>
The vmalloc_32 function together with the memset to clear
the new pages are replaced with a vmalloc_user.
A pre-2.6.18 compat vmalloc_user is added.
Please replace any breakage on machines with > 1GB of memory.
ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.
Tested (compilation only) to make sure the files are compiling without
any warning/error due to new changes
Signed-off-by: Amol Lad <amol@verismonetworks.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
I need the following patch to fix compilation of
latest drm/linux-core on my ppc64 machine.
/home/mb/develop/git/drm/linux-core/savage_bci.c: In function ‘savage_driver_firstopen’:
/home/mb/develop/git/drm/linux-core/savage_bci.c:587: error: ‘DRM_MTRR_WC’ undeclared (first use in this function)
/home/mb/develop/git/drm/linux-core/savage_bci.c:587: error: (Each undeclared identifier is reported only once
/home/mb/develop/git/drm/linux-core/savage_bci.c:587: error: for each function it appears in.)
/home/mb/develop/git/drm/linux-core/savage_bci.c: In function ‘savage_driver_lastclose’:
/home/mb/develop/git/drm/linux-core/savage_bci.c:664: error: ‘DRM_MTRR_WC’ undeclared (first use in this function)
I looked at in-kernel drmP.h and it actually
has the same fix in it.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
The current version didn't build on BSD, where the new functionality isn't used
yet anyway. Whoever changes that will hopefully be able to make the OSes share
this file as well.
This will come in very handy for tiled buffers on intel hardware.
Also add some padding to interface structures to allow future binary backwards
compatible changes.
This makes an allocated block actually align itself and returns any
wasted space to the manager.
Also add some functions to grow and shrink the managed area.
This will be used in the future to manage the buffer object swap cache.
otherwise data will be missing, which becomes apparent when the kernel evicts
batch buffers which are likely to be written into in the evicted state,
and then rebound to the AGP aperture.
This means we cannot rely on the AGP module to flush the
cache for us.
driver we're on.
Avoid global cache flushes before inserting pages.
In general, they are never mapped, and not accessed through the kernel map, so
a cache flush should not be necessary. The exception is pages that are bound
cached. We might need a cache flush for those.
The mm_lock function is used when leaving vt. It evicts _all_ buffers.
Buffers with the DRM_BO_NO_MOVE attribute set will be guaranteed to
get the same offset when / if they are rebound.
Fix buffer bound caching policy changing, Allow
on-the-fly changing of caching policy on bound buffers if the hardware
supports it.
Allow drivers to use driver-specific AGP memory types for TTM AGP pages.
Will make AGP drivers much easier to migrate.
Adapt for new functions in the 2.6.19 kernel.
Remove the ability to have multiple regions in one TTM.
This simplifies a lot of code.
Remove the ability to access TTMs from user space.
We don't need it anymore without ttm regions.
Don't change caching policy for evicted buffers. Instead change it only
when the buffer is accessed by the CPU (on the first page fault).
This tremendously speeds up eviction rates.
Current code is safe for kernels <= 2.6.14.
Should also be OK with 2.6.19 and above.
Initialize the spinlock unconditionally when struct drm_device is filled in,
and return early in drm_locked_tasklet() if the driver doesn't support IRQs.
It looks like this would have caused signals to always get sent on the next
vertical blank, regardless of the sequence number.
(cherry picked from cf6b2c5299 commit)
When this flag is set and the target sequence is missed, wait for the next
vertical blank instead of returning immediately.
(cherry picked from 89e323e490 commit)
This makes it easier for userspace to know when it needs to allocate an ID.
Also free drawable information memory when it's no longer needed.
(cherry picked from df7551ef73 commit)
Actually make the existing ioctls for adding and removing drawables do
something useful, and add another ioctl for the X server to update drawable
information. The only kind of drawable information tracked so far is cliprects.
(cherry picked from 29598e5253 commit)
When the vertical blank interrupt is enabled for both pipes, pipe A is
considered primary and pipe B secondary. When it's only enabled for one pipe,
it's always considered primary for backwards compatibility.
(cherry picked from 0c7d7f4361 commit)
Actually make the existing ioctls for adding and removing drawables do
something useful, and add another ioctl for the X server to update drawable
information. The only kind of drawable information tracked so far is cliprects.
When the vertical blank interrupt is enabled for both pipes, pipe A is
considered primary and pipe B secondary. When it's only enabled for one pipe,
it's always considered primary for backwards compatibility.
Change the fence object interface somewhat to allow some more flexibility.
Make list IOCTLS really restartable.
Try to avoid busy-waits in the kernel using immediate return to user-space with an -EAGAIN.
Add a function to free buffers on hold for destruction if their
fence object has expired.
Add a timer to periodically call that function when there are
buffers pending deletion.
First warning result from open-coded PTR_ERR,
the rest is caused by code like this:
*(u32 *) ((u32) buf_priv->kernel_virtual + used)
I've also fixed a missing PTR_ERR in i830_dma.c
From: Denis Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
0x00 EXE fence. Signals when command stream interpreter has reached the point
where the fence was emitted.
0x01 FLUSH fence. Signals when command stream interpreter has reached the point
where the fence was emitted, and all previous drawing operations have been
completed and flushed.
Implements busy wait (for fastest response time / high CPU) and
lazy wait (User interrupt or timer driven).
First warning result from open-coded PTR_ERR,
the rest is caused by code like this:
*(u32 *) ((u32) buf_priv->kernel_virtual + used)
I've also fixed a missing PTR_ERR in i830_dma.c
From: Denis Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
32-bit physical device addresses are mapped directly to user-tokens. No
duplicate maps are allowed, and the addresses are assumed to be outside
of the range 0x10000000 through 0x30000000. The user-token is identical
to the 32-bit physical start-address of the map.
64-bit physical device addressed are mapped to user-tokens in the range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
Other map types, like upcoming TTM maps are mapped to user-tokens in the
range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
This keeps compatibility with buggy drivers, while still implementing a
hashed map lookup. The SiS and via device driver major bumps are
reverted.
0x10000000 to 0x90000000 in PAGE_SIZE increments.
Implement hashed map lookups.
This potentially breaks both 2D and 3D drivers. If so, the corresponding
2D and 3D driver should be fixed, and it's corresponding drm device driver
should have its major bumped as soon as possible.
Bump sis and via drm device driver majors.
The SiS and Unichrome 3D drivers are fixed in Mesa CVS HEAD and
mesa_6_4_branch.
drm_mtrr_{add,del} for handling the MTRR setup. Still has a LOR issue
with DRM_VERIFYAREA_READ/DRM_COPY_FROM_USER_UNCHECKED in savage_bci.c
-- this won't work with the fine-grained locking in use, and just doing
a single copyin to a temporary will probably work fine. Also note that
the module leaks approximately 4 kb on unload.
radeon_cp.c to use a drm_local_map_t-type mapping (drm_core_ioremap
rather than drm_ioremap), which contains private device mapping
information on BSD. I also changed the ati_pcigart interface to use
"void *" for pointers to kva rather than "unsigned long". While PCIGART
support appears to be broken on FreeBSD currently, I think this is not
new, and BusType PCI remains working on my r100 in Linux.
drm_agp_foo_ioctl pair. Modifies the MGA DRM to use the drm_agp_foo
functions instead of the drm_foo_agp functions. The drm_foo_agp
functions are no longer exported by drm.ko.
Ensures that dma->seg_count and dma->page_count are properly set in
drm_addbufs_{agp,sg,fb}. drm_addbufs_pci was already correct.
Ensures that mga_do_agp_dma_bootstrap correctly sets agp_buffer_token.
At this point PCI DMA is still broken.
Xorg bug: #4797 Reviewed by: Dave Airlie, Eric Anholt Signed-off-by: Ian
Romanick <idr@us.ibm.com>
me to match other drivers and avoid ifdeffing. The linux via_drv.c will
be moved from shared-core to linux-core soon by repocopy.
Submitted by: Jake Burkholder <jake@FreeBSD.org> Tested by: unichrome
caller on fb / agp memory alloc and free. Otherwise malicious clients
can register allocations on other clients or free memory used by other
clients which will lead to severe memory manager inconsistensies.
understandable: preinit -> load postinit -> (removed) presetup ->
firstopen postsetup -> (removed) open_helper -> open prerelease ->
preclose free_filp_priv -> postclose pretakedown -> lastclose
postcleanup -> unload release -> reclaim_buffers_locked version ->
(removed)
postinit and version were replaced with generic code in the Linux DRM
(drivers now set their version numbers and description in the driver
structure, like on BSD). postsetup wasn't used at all. Fixes the savage
hooks for initializing and tearing down mappings at the right times.
Testing involved at least starting X, running glxgears, killing
glxgears, exiting X, and repeating.
Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
buffers that have been allocated from AGP. This includes some new
capable(CAP_SYS_ADMIN) checks, these functions are also protected by
the root requirement on the IOCTL macros.
code duplication, and it also hands you the map pointer so you don't
need to re-find it.
- Remove the permanent maps flag. Instead, for register and framebuffer
maps, we always check whether there's already a map of that type and
offset around. Move the Radeon map initialization into presetup (first
open) so it happens again after every takedown.
- Remove the split cleanup of maps between driver takedown (last close) and
cleanup (module unload). Instead, always tear down maps on takedown,
and drivers can recreate them on first open.
- Make MGA always use addmap, instead of allocating consistent memory in
the PCI case and then faking up a map for it, which accomplished nearly
the same thing, in a different order. Note that the maps are exposed to
the user again: we may want to expose a flag to avoid this, but it's
not a security concern, and saves us a lot of code.
- Remove rmmaps in the MGA driver. Since the function is only called during
takedown anyway, we can let them die a natural death.
- Make removal of maps happen in one function, which is called by both
drm_takedown and drm_rmmap_ioctl.
Reviewed by: idr (previous revision) Tested on: mga (old/new/pci dma),
radeon, savage
This patch adds serveral new ioctls and a new query to get_param query to
support PCI MGA cards.
Two ioctls were added to implement interrupt based waiting. With this
change, the client-side driver no longer needs to map the primary DMA
region or the MMIO region. Previously, end-of-frame waiting was done by
busy waiting in the client-side driver until one of the MMIO registers
(the current DMA pointer) matched a pointer to the end of primary DMA
space. By using interrupts, the busy waiting and the extra mappings are
removed.
A third ioctl was added to bootstrap DMA. This ioctl, which is used by the
X-server, moves a *LOT* of code from the X-server into the kernel. This
allows the kernel to do whatever needs to be done to setup DMA buffers.
The entire process and the locations of the buffers are hidden from
user-mode.
Additionally, a get_param query was added to differentiate between G4x0
cards and G550 cards. A gap was left in the numbering sequence so that,
if needed, G450 cards could be distinguished from G400 cards. According
to Ville Syrjälä, the G4x0 cards and the G550 cards handle
anisotropic filtering differently. This seems the most compatible way
to let the client-side driver know which card it's own. Doing this very
small change now eliminates the need to bump the DRM minor version
twice.
http://marc.theaimsgroup.com/?l=dri-devel&m=106625815319773&w=2
A number of ioctl handlers in linux-core were also modified so that they
could be called in-kernel. In these cases, the in-kernel callable
version kept the existing name (e.g., drm_agp_acquire) and the ioctl
handler added _ioctl to the name (e.g., drm_agp_acquire_ioctl).
This patch also replaces the drm_agp_do_release function with
drm_agp_release. drm_agp_release (drm_core_agp_release in the previous
patch) is very similar to drm_agp_do_release, and I saw no reason to
have both.
This commit *breaks the build* on BSD. Eric said that he would make the
required updates to the BSD side soon.
Xorg bug: 3259 Reviewed by: Eric Anholt
There were two problems. First, the 'warp' and 'primary' pointers weren't
cleared, so mga_do_cleanup_dma, which gets called multiple times, would
try to ioremapfree them multiple times. This resulted in the new error
messages to syslog. The second problem was the, since the dev_private
structure isn't reallocated and cleaned out in mga_do_init_dma, when
the server is reloaded idle-waits would wait for impossible values.
I have given this patch some more riggorous testing. This includes:
- Load module, start server, run GL app, stop server, unload module.
- Load module, start server, run GL app, stop server, unload module, reload
module, restart server, run GL app.
- Load module, start server, run GL app, stop server, restart server, run
GL app, stop server, unload module.
In all three cases, everything worked as expected. Please let me know if
there are any further regressions with this patch.
Xorg bug: 3408 Reported by: Chris Rankin
linux-core to free pci memory without freeing the structure. Linux-core
internals often create pci dma handle structures on the stack due to
the lack of a drm_local_map_t to store them in properly. Fix the
original drm_pci_free to actually free the dma handle structure instead
of leaking it.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
There's two choices when fb is or isn't loaded as we treat ourselves as a
PCI driver in the latter case.
If we are a PCI driver, then register the suspend/resume functions
directly. If not, then we register as a sysdev and pick up the
suspend/resume actions and pump them down into a generic *power
function.
It'll be nice when this little mess is sorted out with regard to being a
real PCI driver ;-/
that a device absolutely is, absolutely is not, or may or may not be
AGP. Modify the i915 DRM to use this to force all i9x5 devices to be
"AGP" (even the PCI-e devices).
Reported by: Lukas Hejtmanek
is now allocated (and partially filled in) by the new
mga_driver_preinit function.
This allows the driver to detect the type of card (i.e., G200 class vs.
G400 class) on its own. The chipset value passed to mga_dma_init is now
ignored. This same technique is used by the radeon DRM.
As a result of this, mga_driver_pretakedown was converted to
mga_driver_postcleanup. This routine gets called in some other places
than might be expected, and it sets the dev_private pointer to NULL.
That little gem took over an hour to track down. :(
platform-specific drm_device_is_agp function. Added implementation of
this function the the Linux-specific portion of the MGA driver to
detect PCI G450 cards. Added code to the Linux-specific portion of the
generic DRM layer to not initialize AGP infrastructure if the card is
not AGP (this matches what already existed in BSD).
Bumped the driver date and the driver patch-level for MGA.
This mostly fixes bugzilla #3248. The BSD side still needs an
implementation of mga_driver_device_is_agp.
with IOMMUs and such. There is one usage of the forbidden vtophys()
left in drm_scatter.c which will be fixed up soon. This required a KPI
change for drm_pci_alloc/free() to return/use a drm_dma_handle_t that
keeps track of os-specific bits, rather than just passing around the
vaddr/busaddr/size.
Submitted by: Tonnerre Lombard (partially) Tested on: FreeBSD: Rage128
AGP/PCI Linux: Savage4 AGP/PCI
flag DMA_QUIESCENT (typically the X server), but gets interrupted by a
signal. The locking IOCTL should then return an error, but if
DMA_QUIESCENT succeeds it returns 0, and the client falsely thinks it
has the lock. In addition The client waits for DMA_QUISCENT and
possibly DMA_READY without having the lock.
New PCI command parser. Moved from via_dma.c to via_verifier.c so functions
with similar functionality are close to eachother.
Moved video related functions to via_video.c, which might be extended in
the future, as new video functionality is added.
New device-specific generic IRQ IOCTL, similar to the general VBLANK IOCTL,
but with support for multiple device IRQ sources and functionality.
Support for Unichrome Pro PM800/CN400 video DMA commands in verifier and
PCI parser.
Support for Unichrome Pro PM800/CN400 HQV IRQs in the new generic IRQ
IOCTL.
Bumped minor. New version 2.6.0.
what wait_event_interruptible_timeout() does, use the function and just
change the return values appropriately.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
so we need to consult the EFI memory map before we try to set the write
combine attribute of a page. This patch will try to map a page write
combined if it's not an AGP page and the EFI memory map says it's ok,
otherwise it falls back to a regular, uncached mapping. Can someone
please apply this to the drm tree?
From: Jesse Barnes
privileges on Radeon hardware. Essentially, a malicious program could
submit a packet containing an offset (possibly in main memory) to be
rendered from/to, while a separate thread switched that offset in
userspace rapidly between a valid value and an invalid one.
radeon_check_and_fixup_offset() would pull the offset in from user
space, check it, and spit it back out to user space to be copied in
later by the emit code. It would sometimes catch the bad value, but
sometimes the malicious program could modify it after the check and get
an invalid offset rendered from/to.
Fix this by allocating a temporary buffer and copying the data in at once.
While here, make the cliprects stuff not do the VERIFYAREA_READ and
COPY_FROM_USER_UNCHECKED gymnastics, avoiding a lock order reversal on
FreeBSD. Performance impact is negligible -- no difference on r200 to
~1% improvement on rv200 in quake3 tests (P4 1Ghz, demofour at
1024x768, n=4 or 5).
FreeBSD. Add drm_get_resource_{start|len} so linux-specific stuff
doesn't need to be in shared code.
- Fix mach64 build by using __DECONST to work around passing a const
pointer to useracc, which is unfortunately not marked const.
- Get rid of a lot of maplist code by not having dev->maplist be a pointer,
and by sticking the link entries directly in drm_local_map_t rather
than having a separate structure for the linked list.
- Factor out map uninit and removal into its own routine, rather than
duplicating in both drm_takedown() and drm_rmmap().
- Hook up more driver functions, and correct FreeBSD-specific bits of
radeon_cp.c, making radeon work.
- Baby steps towards using bus_space as we should.
The attached patch adds a new buffer type DRM_FB_BUFFER. It works like AGP
memory but uses video memory.
From: austinyuan@viatech.com.cn (fd.o bug 1668) Signed-off-by: Dave Airlie
<airlied@linux.ie>
implementation errors). Direct hardware (MMIO, BCI) access is no longer
needed in the Mesa driver. Bumped version to 2.0.0. Corresponding
changes to the DDX and Mesa drivers are being committed.
Alan Hourihane
Keith Packard
Alan Hourihane
Jesse Barnes
Thomas Hellstrom
Dave Airlie
Jesse Barnes
Eric Anholt
Dave Airlie
Ian Romanick
Brian
Dave Airlie
Ben Skeggs
Dave Airlie
Adrian Bunk
Pekka Paalanen
Dave Airlie
Jakob Bornecrantz
Arthur Huillet
Kristian Høgsberg
Michel Dänzer
David Woodhouse
Jesse Barnes
Dave Airlie
David Airlie
Stephane Marchesin
root
Brian
George Sapountzis
Dave Airlie
Jakob Bornecrantz
root
Maarten Maathuis
Jay Estabrook
Adam Jackson
Thomas Hellstrom
Matthieu Castet
Jeremy Kolb
Christoph Hellwig
Dave Airlie
Ben Skeggs
Dave Airlie
Michael Buesch
Tilman Sauerbeck
Felix Kuhling
Dave Airlie
Thomas Hellstrom
Eric Anholt
Adam Jackson
Jon Smirl