With the introduction of this function, it is possible that for certain
monitor and window configurations, creating an SDL window will cause a
native crash.
```
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000050
Exception Codes: 0x0000000000000001, 0x0000000000000050
Exception Note: EXC_CORPSE_NOTIFY
Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process: exc handler [56627]
VM Region Info: 0x50 is not in any region. Bytes before following region: 140737486737328
REGION TYPE START - END [ VSIZE] PRT/MAX SHRMOD REGION DETAIL
UNUSED SPACE AT START
--->
VM_ALLOCATE 7fffffe75000-7fffffe76000 [ 4K] r-x/r-x SM=ALI
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libSDL2.dylib 0x10247f665 SDL_UpdateFullscreenMode + 357
1 libSDL2.dylib 0x10247ec70 SDL_CreateWindow_REAL + 1504
2 ??? 0x111262de8 ???
3 ??? 0x110c39fff ???
4 libcoreclr.dylib 0x101fdf2a9 CallDescrWorkerInternal + 124
```
Tracking thread from our end: https://github.com/ppy/osu-framework/issues/5190
Regressed with: https://github.com/libsdl-org/SDL/pull/5573
In testing, the window would not find a valid screen if created
"hanging" off a primary display with a secondary display below it. In
checking why this was the case, the `display_centre` was being
calculated with a negative y origin, causing a final negative value
falling outside all display bounds:
```
SDL error log [debug]: display_centre.y = -1296 + 1296 / 2
SDL error log [debug]: Display rect 0: 0 0 2560 1440
SDL error log [debug]: Display rect 1: 2560 -625 1080 2560
SDL error log [debug]: Display rect 2: 0 1440 1728 1296
```
The method that was being used to find the current window using the frame
origin/size seems unreliable, so I have opted to replace it with with a
tried method (https://stackoverflow.com/a/40891902).
Initial testing shows that this works with non-standard DPI screens, but
further testing would be appreciated (cc @sezero / @misl6 from the
original PR thread).
We actually request CSD mode with xdg-decoration for borderless
windows, so we get what we wanted there and there's no point in going
into fallback paths.
The 5.1 versions didn't use the new algorithm, and making that new
algorithm work took so many permutes that it was significantly slower
than just using the scalar versions.
However, mono-to-stereo is an extremely common conversion, and it's
trivial to accelerate it with plain SSE, so that was added!
Currently, the SDL_WINDOWEVENT_RESIZED event is sent before the actual
window is resized (and various internal state, such as the desired
GL/Vulkan backbuffer size, are updated). This makes sense, as SDL will
discard a no-op resize, which would be the case if we had resized before
sending the event (indeed, there are existing hacks to prevent this).
However, this means that SDL_{GL,Vulkan}_GetDrawableSize() will still
use the old size in the SDL_WINDOWEVENT_RESIZED handler. In the case of
SDL_Renderer, this means the drawable size it uses will be wrong, and
the viewport will get "updated" to the old value.
This then results in bug #5899.
Pipewire 0.3.44 introduced PW_KEY_TARGET_OBJECT, which is to be used to specify target connection nodes for streams. This parameter takes either a node path (PW_KEY_NODE_NAME) or serial number (PW_KEY_OBJECT_SERIAL) to specify a target node. The former is used in this case since the path is already being retrieved and stored for other purposes.
The target_id parameter in pw_stream_connect() is now deprecated and should always be PW_ID_ANY when PW_KEY_TARGET_OBJECT is used.
Make the default device metadata node persist for the lifetime of the hotplug loop so the default source/sink devices will be updated if they change during runtime.
With Pipewire now requiring a minimum version 0.3.24, the PW_KEY_CONTEXT_PROFILE_MODULES value is no longer required for legacy compatability and can be safely removed.
* Fix assumption that DRI_DEVNAME begins at 0
The existing logic of the code was to count every possible entry in
KMSDRM_DRI_PATH. After this a for loop would start trying to open
filename0, filename1, filename2, etc. In recent Linux kernels (say
5.18) with simpledrm, the lowest KMSDRM_DRI_DEVNAME is often
/dev/dri/card1, rather than /dev/dri/card0, causing the code to fail
once /dev/dri/card0 has failed to open. Running:
modprobe foodrm && modprobe bardrm && rmmod foodrm
before you try to run an application with SDL KMSDRM would have also
made this fail.
* Various changes from review
- Removed newline and period from SDL error
- Explicitely compare memcmp to zero (also changed to SDL_memcmp)
- Changed memcpy to strncpy
- Less aggressive line wrapping
* Various changes from review
- strncpy to SDL_strlcpy
- removed size hardcodings for KMSDRM_DRI_PATHSIZE and
KMSDRM_DRI_DEVNAMESIZE
- made all KMSDRM_DRI defines, run-time variables to reduce bugs caused
by these defines being more build-time on Linux and more run-rime on
OpenBSD
- renamed openbsd69orgreater variable to moderndri
- altered comment from "if on OpenBSD" to add difference in 6.9
* Various changes from review
- Use max size of destination, rather than max size of source
- Less hardcodings
When building on macOS without gcc (e.g. clang) where HAVE_GCC_ATOMICS
is not defined, `SDL_AtomicTryLock` will call
`OSAtomicCompareAndSwap32Barrier` which is not yet declared.
Including OSAtomic.h on OSX resolves this error/warning:
SDL_spinlock.c:125:12: error: implicit declaration of function
'OSAtomicCompareAndSwap32Barrier' is invalid in
C99 [-Werror,-Wimplicit-function-declaration]
return OSAtomicCompareAndSwap32Barrier(0, 1, lock);
This was reported in issue #3885 but marked Invalid and closed - possibly
because the default CMake build uses gcc instead of clang.
The documentation doesn't state that the argument is ever modified,
and no implementation does so currently.
This is a non-breaking change to guarantee as much to callers.
strchr and strrchr return a pointer to the first/last occurrence of a
character in a string, or NULL if the character is not found. According
to the C standard, the final null terminator is part of the string, and
it should thus be possible to get a pointer to the final null with
these functions. The fallback implementations of SDL_strchr and
SDL_strrchr would always return NULL if trying to find '\0', and this
commit fixes that.
* Xbox GDK support (14 squashed commits)
* Added basic keyboard testing
* Update readme
* Code review fixes
* Fixed issue where controller add/removal wasn't working (since the device notification events don't work on Xbox, have to use the joystick thread to poll XInput)
Also added test functions for multi-line debug text display
Currently this only supports ASCII, as the font doesn't have the correct Latin-1 characters
The HIDAPI joystick driver doesn't properly reset the change counter
it uses to track if re-enumeration is needed when the joystick
subsystem is quit and then reinitialized.
The first SDL_Init(SDL_INIT_JOYSTICK) will result in the expected
HIDAPI joysticks appearing, but subsequent calls will result in no
joysticks being enumerated until another HIDAPI joystick is added
or removed from the system.
Use SDL_lroundf() to round fractional backbuffer sizes halfway away from zero, as this is the rounding method recommended by the forthcoming Wayland fractional scaling protocol.
We might want to use ssize_t as @Guldoman suggested, but that's a larger internal API change, and still requires casting of the SDL_utf8strnlen() result.
Fixes https://github.com/libsdl-org/SDL/pull/5821
This allows us to handle controllers that use the Xbox protocol but look like Nintendo Switch or Playstation controllers, like the Qanba Dragon Arcade Stick in PC mode
This is done such that we can disable LTO for these 2 functions when
building with MSVC.
This is due to a limitation of Link Time Code Generation (LTCG).
Code generation might generate a new reference to memset after linking
has started. The LTCG must make assumptions about where memset is
defined which is normally the C runtime.
Some compositors will provide 'nicer' / 'human readable' output descriptions via the xdg-output protocol. Use these description strings, when available, instead of the model name provided by wl-output. On compositors such as GNOME where this is provided, the display names provided to applications by SDL will now match those in the desktop display settings panel. On compositors where this data isn't provided, the old behavior of using the model string provided by wl-output will remain unchanged.
Additionally, per the protocol spec, output data provided by xdg-output should supersede wl-output data, so this is the recommended behavior in general.
If the width is sufficiently ludicrous, then the calculated pitch or
the image size could conceivably be a signed integer overflow, which
is undefined behaviour. Calculate in the unsigned size_t domain, with
overflow checks.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Adds hint "SDL_WINDOWS_DPI_SCALING" which can be set to "1" to
change the SDL coordinate system units to be DPI-scaled points, rather
than pixels everywhere.
This means windows will be appropriately sized, even when created on
high-DPI displays with scaling.
e.g. requesting a 640x480 window from SDL, on a display with 125%
scaling in Windows display settings, will create a window with an
800x600 client area (in pixels).
Setting this to "1" implicitly requests process DPI awareness
(setting SDL_WINDOWS_DPI_AWARENESS is unnecessary),
and forces SDL_WINDOW_ALLOW_HIGHDPI on all windows.
If the move results in a DPI change, we need to allow the window to resize (e.g. AdjustWindowRectExForDpi frame sizes are different).
- WM_DPICHANGED: Don't assume WM_GETDPISCALEDSIZE is always called for PMv2 awareness - it's only called during interactive dragging.
- WIN_AdjustWindowRectWithStyle: always calculate final window size including frame based on the destination rect,
not based on the current window DPI.
- Update wmmsg.h to include WM_GETDPISCALEDSIZE (for WMMSG_DEBUG)
- WIN_AdjustWindowRectWithStyle: add optional logging
- WM_GETMINMAXINFO: add optional HIGHDPI_DEBUG logging
- WM_DPICHANGED: fix potentially clobbering data->expected_resize
Together these changes fix the following scenario:
- launch testwm2 with the SDL_WINDOWS_DPI_AWARENESS=permonitorv2 environment variable
- Windows 10 21H2 (OS Build 19044.1706)
- Left (primary) monitor: 3840x2160, 125% scaling
- Right (secondary) monitor: 2560x1440, 100% scaling
- Alt+Enter, Alt+Enter (to enter + leave desktop fullscreen), Alt+Right (to move window to right monitor). Ensure the window client area stays 640x480. Drag the window back to the 125% monitor, ensure client area stays 640x480.
The hint allows setting a specific DPI awareness ("unaware", "system", "permonitor", "permonitorv2").
This is the first part of High-DPI support on Windows ( https://github.com/libsdl-org/SDL/issues/2119 ).
It doesn't implement a virtualized SDL coordinate system, which will be
addressed in a later commit. (This hint could be useful for SDL apps
that want 1 SDL unit = 1 pixel, though.)
Detecting and behaving correctly under per-monitor V2
(calling AdjustWindowRectExForDpi where needed) should fix the
following issues:
https://github.com/libsdl-org/SDL/issues/3286https://github.com/libsdl-org/SDL/issues/4712
I was looking at how errors are handled by SDL and came across this #define SDL_ERRBUFIZE which looks like a typo for SDL_ERRBUFSIZE, but either way, it looks like this isn't being used anywhere anymore because it was getting reported whenever I compile SDL with -Wunused-macros, and the last time it was mentioned in the code was from commit 09ca66b.
XDG-toplevel min/max size values are double-buffered data and must be committed before entering the fullscreen state, or a max window size value smaller than the display dimensions may cause the compositor to incorrectly configure the fullscreen window size. This fixes windowed->fullscreen transitions on GNOME, where, previously, certain combinations of window flags and min/max size values could cause entering fullscreen mode to fail with odd window sizes and/or offsets due to the new max size values not being committed before entering fullscreen, causing the compositor to clamp to the old values.
In the case of libdecor, it has its own layer of buffering on top of the xdg-toplevel surface for the min/max window dimensions, so both a frame commit and surface commit are required to set the state properly.
Previously, the surface damage region was being set in the same callback used for preventing render hangs in the GL backend when the surface was not visible. This was not ideal, as the callback was never fired in the case of using a different render backend or having a swap interval of 0. Use a separate frame callback for setting the surface damage region to ensure that it fires reliably, regardless of the backend being used or swap interval.
Some compositors (GNOME for example) don't set the transform flag when dealing with portrait mode displays, so the video modes won't have the width/height swapped in all cases where they should be. Check for both the 90/270 degree transform flag and if the display is taller than it is wide when determining whether to swap the width and height of the emulated video modes, and adjust the comparison logic when size testing against the native mode to account for this.
Add the hint "SDL_VIDEO_WAYLAND_MODE_EMULATION", which can be used to disable mode emulation under Wayland. When disabled, only the desktop and/or native display resolution is exposed.
Previously, scale values used by the displays and surfaces were always integers, with fractional scale values only being calculated when the backbuffer and viewport sizes were being determined. Now, if xdg-output is available, the fractional scale of output displays is calculated when the displays are enumerated and the true scale values of the output devices are used whenever possible.
This unifies the integer and fractional scaling systems, allows for the use of more accurate scale values that minimize overdraw when windows straddle multiple outputs, and lays the groundwork for the pending Wayland scaling protocols that will report the preferred scale values per-surface instead of per-output.
Compartmentalize the fullscreen mode emulation code blocks, unify the windowed/fullscreen viewport logic, consolidate all window geometry code into a central function to eliminate blocks of duplicate code and rename related variables and functions to more explicitly reflect their purpose.
Because we were sending multiple chunks of preedit strings,
`SDL_SendEditingText` was using the old `SDL_TEXTEDITING` event only.
Now if `SDL_HINT_IME_SUPPORT_EXTENDED_TEXT` is enabled, we send the full
string and correctly set the cursor position and selection size.
- SDL_JoystickGUID -> SDL_GUID (though we retain a type alias)
- Operations for GUID <-> String ops are now in
src/SDL_guid.c and include/SDL_guid.h
- The corresponding Joystick operations delegate to SDL_guid.c
- Added test/testguid.c
As of #5703, we call libdecor_dispatch() in Wayland_WaitEventTimeout(),
but this will crash if we don't load libdecor, as
SDL_VideoData::shell.libdecor will be NULL.
Since we don't load libdecor if we don't intend to use it (i.e., if
should_use_libdecor returns false), this results in a crash under KDE in
almost all circumstances.
The MinGW-64 header defines the parameters as ABI::Windows::Foundation::IReference<INT32 > **, but the Windows header defines the parameters as __FIReference_1_int**
Since #5602, SDL is intended to have the same ABI across the whole
major-version 2 cycle, so we should not check that the minor version
matches the one that was used to compile an application.
There are two checks that could make sense here.
The first check is that the major version matches the expected major
version. This is usually unnecessary and is not usually done (if we're
calling into the wrong library we'll likely crash anyway), but since we
have the information, we might as well continue to use it.
The second check is whether the version provided by the caller is
equal to or greater than a threshold version at which additional fields
were added to the struct. If it is, we should populate those fields;
if it is not, then we cannot. This is only useful on platforms where
additional fields have genuinely been added during the lifetime of
SDL 2, like Windows and DirectFB (but not X11).
This commit changes the first check to be consistent about only looking
at the minor version, while leaving the second check using SDL_VERSIONNUM
(which will be removed or widened in SDL 3, but it's fine for now).
Resolves: https://github.com/libsdl-org/SDL/issues/5711
Fixes: cd7c2f1 "Switch versioning scheme to be the same as GLib and Flatpak"
Signed-off-by: Simon McVittie <smcv@collabora.com>
Otherwise we ignore the Configure/etc events when they come in because
the window is already in an identical state as far as SDL is concerned.
Fixes#5593.
May also fix:
Issue #5572.
Issue #5595.
This reverts commit 3fcc2cb500.
Button4 and Button5 are for the scrollwheel, not the extended buttons.
I don't know of a way to query the state of the extended buttons using X11.
These try to pull from the .pdf files that are installed with
macOS, which fit our needs better, and fall back to the most
reasonable defaults available from NSCursor if we can't load
them.
Since these are installed under /System, they should be sandbox
accessible, and if this totally fails, it should still go on,
albeit with a less good cursor.
Reference Issue #2123.
On Gnome (and hopefully others!), this produces something that actually
matches SDL_SYSTEM_CURSOR_SIZENWSE/SDL_SYSTEM_CURSOR_SIZENESW. On
other desktop enviroments, it probably fits the spirit better than
XC_fleur in any case.
Reference Issue #2123.
Added the ability to specify a name and the product VID/PID for a virtual controller
Also added a test case to testgamecontroller, if you pass --virtual as a parameter
Don't be fooled by the diff size - this ended up being a big refactor of the
shell surface management, masked only by some helper macros I wrote for the
popup support.
This change makes it so when xdg_decoration is supported, but CSD is requested,
the system bails on xdg support entirely and resets all the windows to use
libdecor instead. This transition isn't pretty, but once it's done it will be
smooth if decorations are an OS toggle since libdecor will take things from
there.
In hindsight, we really should have designed libdecor to be passed a toplevel,
having it manage that for us keeps causing major refactors for _every_ change.
Move rendering of the assert message into a separate
function so we can remove the ugly loop construction.
Changes the logic such that allocation failure no longer
immediately returns SDL_ASSERTION_ABORT, instead we
fall back to the truncated message.
If an error is indicated from SDL_snprintf, then we do
abort with SDL_ASSERTION_ABORT.
* Add changes from code review by @ccawley2011, #5597, overall cleanup
* Update N-Gage README, minor cleanup and rephrasing
* Call SDL_SetMainReady() before calling SDL_main, return SDL_main instead of main
Change Cocoa SDL_VideoData and SDL_WindowData implementations from C structs to Objective-C objects, since bridging between C and ObjC is easier that way.
If the size to be allocated is very large and untrusted, then adding
the padding etc. might be enough to cause unsigned overflow, after
which a very small amount of memory will be allocated.
Signed-off-by: Simon McVittie <smcv@collabora.com>
If we're strict about applying something resembling semantic versioning
to the "marketing" version number, then we can mechanically generate
the ABI version from it.
This limits the range of valid micro versions (patchlevels) to 0-99.
Signed-off-by: Simon McVittie <smcv@collabora.com>
For stable releases, this gives us the ability to make bugfix-only point
releases such as 2.24.1 if we want to, and distinguish between them
programmatically. For example, this ability could have been useful after
2.0.16 to fix Xwayland regressions, and after 2.0.18 to fix event loop
regressions.
For development releases, this gives us the ability to make multiple
prereleases during the same feature cycle, and distinguish between them
programmatically. For example, this would have been useful during 2.0.22
development, which went through three prereleases before reaching the
final release.
Signed-off-by: Simon McVittie <smcv@collabora.com>
* Add initial support for the Nokia N-Gage
* N-Gage: disable clipping for the time being, issue needs to be resolved later
* Move va_copy definition to SDL_internal.h
* Move stdlib.h include to SDL_config_ngage.h, much cleaner this way
* Remove redundant include, add HAVE_STDLIB_H
* Revert "N-Gage: disable clipping for the time being, issue needs to be resolved later"
This reverts commit 4f5f0fc36cc7f34fad05e45671dfa7b8dc32fd51.
* N-Gage: fix clipping issue by providing proper math functions
Enabling GCController.shouldMonitorBackgroundEvents to read background events
for MFi controllers before receiving the first GCControllerDidConnectNotification
is apparently a no-go on macOS (12.3.1 for me), and would crash on attempt.
Apple's documentation is... not great, and doesn't point this out.
This waits for IOS_AddMFIJoystickDevice() to get called down the chain from GCControllerDidConnectNotification, and enables GCController.shouldMonitorBackgroundEvents
if it hadn't been already.
On iOS and tvOS, GCController.shouldMonitorBackgroundEvents is ignored, so
there's no need to check their versions.
Ensure that we're not trying to call SDL_small_alloc()
with a count of zero.
Transforming the code like this fixes a
-Wmaybe-uninitialized warning from GCC 12.0.1
For short messages, use a stack buffer that is
significantly smaller than SDL_MAX_LOG_MESSAGE.
The rationale for this is that we don't want to risk
blowing the stack, while at the same time we would
like to not put pressure on the memory allocator unless
absolutely necessary.
This is the one that splits the "left wing" into two for loops to
bubble out the conditional that decides if it should read from the
left padding or the input buffer.
I still believe the optimization is good, but the basic logic of it
was incorrect, and needs to be reexamined and fixed before going
back into revision control.
We can get _some_ of the info we need out of standard Xlib and report a
single display (which might actually be multiple physical displays mushed
into a single desktop). This is better than nothing, but you should really
just build with XRandR support and get a better X server. :)
- Calculate `j * RESAMPLER_SAMPLES_PER_ZERO_CROSSING` once per loop
iteration since we use it multiple times.
- Do the left-wing loop in two sections: while `srcframe < 0` and then
the remaining calculations when `srcframe >= 0`. This bubbles a conditional
out of every iteration of a tight loop, giving us a boost. We could
_probably_ do this to the right-wing loop too, but it's less straightforward
there.
- The real win: Use floats instead of doubles. This almost doubles the speed
of the entire function on Intel CPUs, and for embedded things without
hardware-level support for doubles, the speedup is enormous. This in
theory might reduce audio quality, though, and I had to put a check in
place to avoid a division-by-zero that we avoided at higher precision, but
this is likely to be worth keeping for at least the Sony PSP and other
smaller platforms, if not everyone.
Instead of waiting until the entire buffer from the SDL callback is ready
to be accepted by PulseAudio, we use pa_stream_set_write_callback and
feed some portion of the buffer as callbacks come in asking for more.
This lets us remove the halving of the buffer size during device open,
and also (hopefully) solves several strange hangs that happen in unusual
circumstances.
Fixes#4387Fixes#2262
* Read IMU scale data from Switch controllers. Up until now, SDL has used hard-coded scaling which isn't correct with some supported controllers.
* Moved declarations to beginning of code blocks to better fit with SDL style requirements
Every other backend does this, so this should match, now.
It's possible this was harmless, but we can avoid the system call
and the (likely?) debug message when it fails, though!
When mode switching is disabled in a video backend, fullscreen windows are basically just fullscreen desktop windows with different internal scaling. As no mode switching occurs, there's no need to minimize them on focus loss by default. This can still be overridden by explicitly setting the internal hint for minimizing on focus loss.
This has the side effect of fixing a bug on GNOME, where, when a fullscreen Wayland window has it's focus lost and restored via alt+tab followed by switching back to windowed mode, the top portion of the window won't end up being obstructed by GNOME's top bar.
This reverts commit 8ceba27d62.
SDL Wayland support is stable, but there are a number of issues with third-party software (NVIDIA drivers, libwayland event overflow, libdecor not handling plugin load failures, Steam overlay not working with Wayland, etc.) that make it better to default to X11 at this time.
Games which would like to prefer wayland when available can use the following code before SDL_Init():
SDL_SetHint(SDL_HINT_VIDEODRIVER, "wayland,x11");
Fixes https://github.com/libsdl-org/SDL/issues/5527
This hint allows libdecor to be used even when xdg-decoration is
available. It's mostly useful for debugging libdecor, but could in
theory be used by applications which want to (for example) bundle their
own libdecor plugins.
When using emulated display modes, the output size is often larger than the drawable buffer. As the surface damage region is automatically calculated from the smaller drawable buffer size, the damage region needs to be manually set to cover the entire viewport region or visual repaint artifacts can result.
I kind of thought it'd be nice to have it in the center, but this is an issue
for applications that still assume global mouse and window positions are
accessible. For example, this fixes cursor offset issues in UE5.
It's possible that an external component (probably a GL/VK context) committed, so we need to cover our bases and detach in both HideWindow and ShowWindow.
Fixes a crash in UE5 editor's pop-ups.
Partially fixes the mouse cursor in UE5 editor. Imperfect because UE5 uses window position and global mouse state to get position, but of course we don't have global mouse and this is just to get the right display index so this still fails overall. We really need to make global mouse support a feature query...
So if Gnome/KDE/etc have a keyboard shortcut or titlebar decoration to
make any window go fullscreen (with the _NET_WM_FULLSCREEN flag on the
_NET_WM_STATE property), we update the SDL window flag.
Fixes#5390.
This makes sure the window doesn't have outdated values if you try to access
them (or call something that does, like SDL_SetWindowMinimumSize).
Fixes#5233.
On Wine, when a window is programmatically minimized in response
to losing focus, we receive a WM_ACTIVATE for the deactivation,
but GetForegroundWindow still indicates that our window is focused.
This causes an incorrect SDL_WINDOWEVENT_FOCUS_GAINED.
This is probably a Wine bug, but it may take a while to fix and
then for the fix to make its way to users.
libGL.so may register callbacks that can be invoked upon XCloseDisplay().
If XCloseDisplay() is called after libGL.so is unloaded, the callback pointer
will point at freed memory and invoking it will crash.
The texture framebuffer check optimized out in f37e4a9 was causing libGL.so to
never be unloaded as a side-effect. Skipping it exposed this bug by allowing
libGL.so to actually unload.
We were returning the report size from HIDAPI_DriverPS5_RumbleJoystick() rather
than 0 upon success, causing SDL_JoystickRumble() (and callers) to think that
rumbling failed.
This didn't cause major problems until 1868c5b, when it started preventing
rumble state from being persisted in the joystick core, even though it was
successfully sent to the hardware.
This led to all sorts of strangeness, including broken rumble duration and
attempts to stop rumble being discarded.
The functions can go south if other operations are in progress, like
X11_SetWindowBordered, which might be doing something traumatic behind the
scenes of the window manager.
We can't make these tasks totally synchronous, which would fix the problem,
because not only can the window manager block however long it wants, it might
also decide to deny our requests without any notification, so we'd be waiting
forever for a window change that isn't coming. :(
Fixes#5274.
Use viewports for non-fullscreen windows when the desktop uses fractional scaling and the window is flagged as DPI-aware to provide a backbuffer mapped as close to 1:1 output as possible. In the cases of odd window sizes the backbuffer may be a pixel off of scaling perfectly into the window size due to its scaled size being rounded off, but a minute amount of scaling during output is likely preferable to the large amounts of overdraw needed with integer scaled buffers.
Expose as many emulated display modes as possible. They will currently display stretched to the display's native desktop aspect, but if an application requires a hardcoded resolution, it will work at minimum.
Aside from the change in the emulated display mode list, the Wayland event handling code had to be updated to support separate scaling for the x and y axes, as square pixels are no longer guaranteed.
Wayland doesn't support mode switching, however Wayland compositors can support the wp_viewporter protocol, which allows for the mapping of arbitrarily sized buffer regions to output surfaces. Use this functionality, when available, for fullscreen output when using non-native display modes and/or when dealing with scaled desktops, which can incur significant overdraw without this extension.
This also allows for the exposure of arbitrarily sized, emulated display modes, which can be useful for legacy compatability.
1. Mod index values are (mostly) constant, so can be done with xkb_state_new
2. Mods can change without the group changing, avoid remap events if possible
Lastly, as a bonus, I added braces to the locale check, because I was nearby.
When using shared linking (linking in the normal way with
-lwayland-client) rather than loading Wayland libraries dynamically at
runtime, listing symbols that don't exist in the current version results
in a build failure. We don't actually call wl_proxy_marshal_flags() or
wl_proxy_marshal_array_flags() directly; the reason we need them is
that they're called by the code generated by wayland-scanner >= 1.20.
If we're building against an older Wayland library, then we'll have its
corresponding version of wayland-scanner (mismatched versions are not
supported), so we won't need those two symbols, and can avoid generating
a dependency on them.
Conversely, if we're building against a newer Wayland library, the
generated code will call them unconditionally, so we cannot treat them as
optional and gracefully fall back: that would result in a crash. Instead,
treat them as a mandatory part of the Wayland library, so that if they
are not found at runtime, we can fall back to X11 without crashing.
libwayland 1.18 is in several LTS distributions (Ubuntu 20.04,
Debian 11, RHEL 8) so avoiding a hard dependency on 1.20 is quite
useful.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Resolves: https://github.com/libsdl-org/SDL/issues/5376
Using wl-output to get the desktop display dimensions and dividing by the integer scale factor will not return the correct result when using a desktop with fractional scaling (e.g. a 3840x2160 display at 150% will incorrectly report the scaled desktop area as 1920x1080 instead of 2560x1440). Use the xdg-output protocol, if available, to retrieve the correct desktop dimensions and offset.
Versions 1 through 3 of the protocol are supported.
- which also enable/disable the orientation lock status.
This is only provided when the window is not SDL_WINDOW_FULLSCREEN (see SDL_video.c).
Final orientation also depends on SDL_HINT_ORIENTATIONS.
The Java code needs the native functions to be implemented, even if
they're not surfaced via the C API, therefore, a stub version of
functions were made only to the purpose of "fill the gaps" when
SDL_HIDAPI_DISABLED set to 1.
if SDL_EnumUnixAudioDevices() fails to find any devices,
set an error message on the exit path. Without this,
SDL_Init() could fail without any message available
in SDL_GetError().
This isn't obvious, but makes sense when thinking about how games actually use it. This is also in line with how Windows mouse relative mode is implemented.
Fixes https://github.com/libsdl-org/SDL/issues/5340
Here's an IRC dump that hopefully explains the issue this fixes:
> I'm debugging something odd where, for a libre game,
unvanquished.net (a FPS), relative mouse input in fullscreen is
buggy
> it's like, working mostly ok, but it has a weird
performance/cleanup bug
> after some time in relative mouse input mode, some time as low
as 15s, usually more, the SDL sends A LOT of relative mouse
input per frame
> almost all of which have xrel==0 && yrel==0
> by A LOT, I mean that after ~1min, it's usually in the
thousands per frame
> each frame, a while ( SDL_PollEvent( &e)) loop reads the
inputs, but it seems SDL is not clearing the list.
> one way to clear the list is to open the in-game console or
menu, which switches the input mode to absolute, then close it
which gets a working relative input mode (for some time at least)
> I've shown the issue to be present with SDL2.0.20 but not with
2.0.14 on my system
> some other players on Arch Linux (SDL2.0.20) report a possibly
related issue, where some keys seem to be pressed at random
> I've did some bisection on SDL master, and I've found that
there are actually two commits involved, one breaking it
totally (no input at all), and one fixing it partially (with
the problem described above)
First related commit that breaks it totally:
commit 82793ac279
Author: Sam Lantinga <slouken@libsdl.org>
Date: Thu Oct 14 14:26:21 2021 -0700
Fixed mouse warping while in relative mode
We should get a mouse event with an absolute position and no relative motion and shouldn't change the OS cursor position at all
Second related commit, that halfway fixes it:
commit 31f8c3ef44
Author: Sam Lantinga <slouken@libsdl.org>
Date: Thu Jan 6 11:27:44 2022 -0800
Fixed event pump starvation if the application frequently pushes its own events
Reverting the first commit did fix the issue for me, but would
probably reintroduce the bug it was fixing(?). This patch should
fix it for everyone hopefully.
https://github.com/DaemonEngine/Daemon/issues/600 is the upstream
bug, and contains some early investigation.
According to MSDN, we can also get SIZE_MAXHIDE and SIZE_MAXSHOW,
based on state changes to other windows. It's not clear under
what circumstances this will happen (I saw some docs indicating
it may require multiple application windows), but it doesn't seem
right to treat them as RESTORED.
- no need to keep the error in a static variable
- always print the error code
- reduce the required stack-size
- reduce the number of snprintf calls (and code size)
Dean Herbert
Sebastian Krzyszkowiak
Ozkan Sezer
slime
Sam Lantinga
Ethan Lee
Ryan C. Gordon
David Gow
Frank Praznik
freebsd
SuperSamus
Cameron Gutman
285424336
Eric Curtin
Eddy Jansson
Chris Mumford
rohlem
Dav999-v
chalonverse
Francisco Javier Trujillo Mata
Cameron Cawley
Jade Macho
Sylvain
Sourcery AI
Pierre Wendling
Brad Smith
Ivan Epifanov
Pieter-Jan Briers
Mathieu Eyraud
Anonymous Maarten
takase1121
Simon McVittie
Eric Wasylishen
Nhalrath
Guldoman
Charlie Birks
yuanhecai
Christoph Reichenbach
Ivan Le Lann
Christian Rauch
Michael Fitzmayer
Frank Richter
Alexander Kanavin
atfrase
emily
Susko3
Daniel Brookman
Jan200101
Carl Friess
Mirko Galimberti
FriendlyAI
Jibb Smart
Dimitriy Ryazantcev
meyraud705
Jaylon Gowie
pionere
Jan Beich
Weng Xuetian
Esme Povirk
Reinhold Gschweicher
Connor Clark
Kimplul
Florian "sp1rit"
Charlie Birks
Jonatha Gabriel
Egor
Christian Kündig
Antoine Fontaine
uyjulian