- use correct refcount variable in get/put routines
- extract counter update from drm_vblank_get
- make signal handling callback per-crtc
- update interrupt handling logic, drivers should use drm_handle_vblank
- move wakeup and counter update logic to new drm_handle_vblank routine
- fixup usage of get/put in light of counter update extraction
- fix longstanding bug in signal code, update pending counter only
*after* we're sure we'll setup signal handling
Introduce tile members for future tiled buffer support.
Allow user-space to explicitly define a fence-class.
Remove the implicit fence-class mechanism.
64-bit wide buffer object flag member.
These require that the status page be referenced by a pointer in GTT, rather
than phsyical memory. So, we have the X Server allocate that memory and tell
us the address, instead.
Conflicts:
linux-core/drm_crtc.c
linux-core/drm_fb.c
Lots of changes to merge with alanh's latest stuff:
o fix use of fb->pitch now that it has the right value
o add new helper for finding the CRTC given an FB
o fix new fb_probe/fb_remove functions to take a CRTC
o fixup callers of new FB routines
o port drm_fb changes to intel_fb
o check for errors after creating fb buffer object
o go back to using cfb_imageblit since the accel stubs aren't ready
places).
Add new FB hooks to the drm driver structure and make i915 use them for an
Intel specific FB driver. This will allow acceleration and better handling
of the command stream.
i915_driver_irq_postinstall was forcing vblank interrupts to pipe A when
called with vblank interrupts disabled. This caused vblank interrupts to be
accidentally re-enabled when VT switching the X server. Instead, start the
driver with vblank interrupts enabled on pipe A to support older X servers,
but then leave control over the state to the X server if it is able to do so.
This just cleans up the xf86drm.c to what I want and drm.h,
I need to fix up the kernel internals to suit these changes now.
I've moved to using struct instead of typedefs for the bo and it doesn't look
that bad so I'll do the same thing for mm and fence..
There can still be other contexts that may use page flipping later on, so don't
just unilaterally 'clean it up', which could lead to the wrong page being
displayed, e.g. when running 3D apps with a GLX compositing manager such as
compiz using page flipping.
When the kernel driver is loaded it sets up a lot of stuff..
it tears down the same stuff on unload.
This add a new map type called DRM_DRIVER which means the driver will clean the mapping up
and fix up the map cleaner
- allow drm_buffer_object_create to be called w/o dev_mapping
- fixup i915 init code to allocate memory, fb and set modes right
- pass fb to drm_initial_config for setup
- change some debug output to make it easier to spot
- fixup lvds code to use DDC probing correctly
The IGPGART setup code was traced using mmio-trace on fglrx by myself
and Phillip Ezolt <phillipezolt@gmail.com> on dri-devel.
This code doesn't let the 3D driver work properly as the card has no
vertex shader support.
Thanks to Matthew Garrett + Ubuntu for providing me some hardware to do this
work on.
This adds the user interfaces from Jakob and hooks them up for 3 ioctls
GetResources, GetCrtc and GetOutput.
I've made the ids for everything fbs, crtcs, outputs and modes go via idr as
per krh's suggestion on irc as it make the code nice and consistent.
It's a good idea to keep these synchronized; even though the DRM doesn't use all
the defines, maintaining two different copies is prone to errors when the diff
gets bigger.
The PGRAPH init for the various cards will need cleaning up at some point,
a lot of the values written there are per-context state left over from the
all the hardcoding done in the ddx.
It's possible some cards get broken by this commit, let me know.
Tested on: NV5, NV18, NV28, NV35, NV40, NV4E
Note that just like the values written to R300_RB3D_DSTCACHE_CTLSTAT these
values are really unknown; ideally more reverse engineering should be done to
determine what these values mean and when they should be set.
graphics objects:
- No longer takes flags/dmaobj parameters, requires some major changes
to the ddx to setup the object through the FIFO. This change is
likely to cause breakages on some cards (tested on NV05,NV28,NV35,
NV40 and NV4E).
dma objects:
- now takes a "class" parameter, not really used yet but we may need
it at some point.
- parameters are checked, so clients can't randomly create DMA objects
pointing at whatever they feel like.
misc:
- Added FB_SIZE/AGP_SIZE getparams
- Read PFIFO_INTR in PFIFO irq handler, not PMC_INTR
- Dump PGRAPH trap info on PGRAPH_INTR_NOTIFY if NSOURCE isn't
NOTIFICATION_PENDING.
Add refcounting of user waiters to the DRM hardware lock, so that we can use the
DRM_LOCK_CONT flag more conservatively.
Also add a kernel waiter refcount that if nonzero transfers the lock for the kernel context,
when it is released. This is useful when waiting for idle and can be used
for very simple fence object driver implementations for the new memory manager.
It also resolves the AIGLX startup deadlock for the sis and the via drivers.
i810, i830 still require that the hardware lock is really taken so the deadlock remains
for those two. I'm not sure about ffb. Anyone familiar with that code?
The MI_WAIT_FOR_EVENT instruction does not support waiting for several events
at once, so this should fix the lockups with page flipping when both pipes are
enabled.
Always use dev_priv->sarea_priv->pf_current_page directly. This allows clients
to modify it as well while they hold the HW lock, e.g. in order to sync pages
between pipes.
The assumption is that synchronous flips are not isolated usually, and waiting
for all of them could result in stalling the pipeline for long periods of time.
Also use i915_emit_mi_flush() instead of an old-fashioned way to achieve the
same effect.
Unfortunately, emitting asynchronous flips during vertical blank results in
tearing. So we have to wait for the previous vertical blank and emit a
synchronous flip.
Leave it to the client to wait for the flip to complete when necessary,
but wait for a previous flip to complete before emitting another one. This
should help avoid unnecessary stalling of the ring due to pending flips.
Call i915_do_cleanup_pageflip() unconditionally in preclose.
Memory types are either fixed (on-card or pre-bound AGP) or not fixed
(dynamically bound) to an aperture. They also carry information about:
1) Whether they can be mapped cached.
2) Whether they are at all mappable.
3) Whether they need an ioremap to be accessible from kernel space.
In this way VRAM memory and, for example, pre-bound AGP appear
identical to the memory manager.
This also makes support for unmappable VRAM simple to implement.
Hook into nv20 pgraph switching functions (they're identical for nv3x).
Actually call nv30_pgraph_context_init so the ctx_table is allocated.
Thanks to Carlos Martin for the help.
This means the loop will wait up to ~10ms for ring buffer space to become
available, rather than just however long it takes to check the space 10000
times. This matches other drivers' behavior when waiting for ring buffer/fifo
space.
* Pulled in some registers from nv10reg.h. Needed for context switching.
* Filled in nv30 graphics context (based on nv40_graph.c).
* Figure out nv30 context table, set up on context creation. Allows the cards automatic switching to work.
The overflows could lead to the AGP aperture overlapping the framebuffer area
in the card's address space when the latter is located at the very end of the
32 bit address space, which would result in a freeze on X server startup,
probably because the card read commands from the framebuffer instead of from
AGP.
See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=392915 .
Now I can get 3D + working grctx switching on my NV40 without
the binary driver initialising the card first. However, this
change also breaks 3D on my C51 even *with* the binary driver's
help. So, it's likely that the weird voodoo is card-specific.
This is enough to get grctx switching going on my NV40 and C51 after
the binary driver has initialised the card first.
Bumping the drm patchlevel because the ddx needs some modifications to
have NV4x work at all with these changes.
With this change the GPU is responsible for doing the channel switch
itself. This is needed for the upcoming NV4x PGRAPH context work as
we don't yet know enough to manually swap PGRAPH contexts.
Replace r300_check_offset() with generic radeon_check_offset(), which doesn't
reject valid offsets when the framebuffer area is at the very end of the card's
32 bit address space. Make radeon_check_and_fixup_offset() use
radeon_check_offset() as well.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=7697 .
The current version didn't build on BSD, where the new functionality isn't used
yet anyway. Whoever changes that will hopefully be able to make the OSes share
this file as well.
Previously, if there were several buffer swaps scheduled for the same vertical
blank, all but the first blit emitted stood a chance of exhibiting tearing. In
order to avoid this, split the blits along slices of each output top to bottom.
- Do important card init in firstopen
- Give each channel it's own cmdbuf dma object
- Move RAMHT config state to the same place as RAMRO/RAMFC
- Make sure instance mem for objects is *after* RAM{FC,HT,RO}
On X init, PFIFO and PGRAPH are reset to defaults. This causes the GPU to
loose the configuration done by the drm. Perhaps a CARD_INIT ioctl a proper
solution to having this problem again in the future..
This will come in very handy for tiled buffers on intel hardware.
Also add some padding to interface structures to allow future binary backwards
compatible changes.
Ok, I lied before.. it was a fluke it worked and required magic to repeat it..
It actually helps to fill in RAMFC entries in the correct place.
The code also clears RAMIN entirely instead of just the hash-table.
Fix buffer bound caching policy changing, Allow
on-the-fly changing of caching policy on bound buffers if the hardware
supports it.
Allow drivers to use driver-specific AGP memory types for TTM AGP pages.
Will make AGP drivers much easier to migrate.
Adapt for new functions in the 2.6.19 kernel.
Remove the ability to have multiple regions in one TTM.
This simplifies a lot of code.
Remove the ability to access TTMs from user space.
We don't need it anymore without ttm regions.
Don't change caching policy for evicted buffers. Instead change it only
when the buffer is accessed by the CPU (on the first page fault).
This tremendously speeds up eviction rates.
Current code is safe for kernels <= 2.6.14.
Should also be OK with 2.6.19 and above.
Added preliminary support for context switches (triggers the interrupts, but hangs after the switch ; something's not quite right yet).
Removed the PFIFO_REINIT ioctl. I hope it's that a good idea...
Requires the upcoming commit to the DDX.
mach64_state.c: convert the DRM_MACH64_BLIT ioctl to submit a pointer to
user-space memory rather than a DMA buffer index, similar to DRM_MACH64_VERTEX.
This change allows the DDX to map the DMA buffers read-only and eliminate a
security problem where a client can alter the contents of the DMA buffer after
submission to the DRM.
This change also affects the DRI/DRM interface. Performace-wise, it basically
affects PCI mode where I get a ~12% speedup for some Mesa demos I tested.
This is mainly due to eliminating an ioctl for allocating the DMA buffer.
mach64_dma.c: move the responsibility for allocating memory for the DMA ring
in PCI mode to the DDX.
This change affects the DDX/DRM interface and unifies a couple of PCI/AGP code
paths for ring memory in the DRM.
Bump the mach64 DRM version major and date.
Map the DMA buffers from the same linear address as the vertex bufs. If
dev->agp_buffer_token is not set, mach64 drm maps the DMA buffers from
linear address 0x0.
This fixes issues on X server startup with versions of xf86-video-intel that
enable the IRQ before they have a context ID.
(cherry picked from 7af93dd984 commit)
It looks like 'after a while', I915REG_INT_IDENTITY_R for some reason always has
VSYNC_PIPEB_FLAG set in the interrupt handler, even though pipe B is disabled.
So we only increase dev->vbl_received if the corresponding bit is also set in
dev->vblank_pipe.
(cherry picked from 881ba56992 commit)
When this flag is set and the target sequence is missed, wait for the next
vertical blank instead of returning immediately.
(cherry picked from 89e323e490 commit)
Initialize it to default value if it hasn't been set by the X server yet.
In i915_vblank_pipe_set(), only update dev_priv->vblank_pipe and call
i915_enable_interrupt() if the argument passed from userspace is valid to avoid
corrupting dev_priv->vblank_pipe on invalid arguments.
(cherry picked from 87c57cba1a commit)
Handle relative as well as absolute target sequence numbers.
Return error if target sequence has already passed, so userspace can deal with
this situation as it sees fit.
On success, return the sequence number of the vertical blank when the buffer
swap is expected to take place.
Also add DRM_IOCTL_I915_VBLANK_SWAP definition for userspace code that may want
to use ioctl() instead of drmCommandWriteRead().
(cherry picked from d5a0f10751 commit)
This makes it easier for userspace to know when it needs to allocate an ID.
Also free drawable information memory when it's no longer needed.
(cherry picked from df7551ef73 commit)
This uses the core facility to schedule a driver callback that will be called
ASAP after the given vertical blank interrupt with the HW lock held.
(cherry picked from 257771fa29 commit)
Actually make the existing ioctls for adding and removing drawables do
something useful, and add another ioctl for the X server to update drawable
information. The only kind of drawable information tracked so far is cliprects.
(cherry picked from 29598e5253 commit)
When the vertical blank interrupt is enabled for both pipes, pipe A is
considered primary and pipe B secondary. When it's only enabled for one pipe,
it's always considered primary for backwards compatibility.
(cherry picked from 0c7d7f4361 commit)
It looks like 'after a while', I915REG_INT_IDENTITY_R for some reason always has
VSYNC_PIPEB_FLAG set in the interrupt handler, even though pipe B is disabled.
So we only increase dev->vbl_received if the corresponding bit is also set in
dev->vblank_pipe.
Initialize it to default value if it hasn't been set by the X server yet.
In i915_vblank_pipe_set(), only update dev_priv->vblank_pipe and call
i915_enable_interrupt() if the argument passed from userspace is valid to avoid
corrupting dev_priv->vblank_pipe on invalid arguments.
Handle relative as well as absolute target sequence numbers.
Return error if target sequence has already passed, so userspace can deal with
this situation as it sees fit.
On success, return the sequence number of the vertical blank when the buffer
swap is expected to take place.
Also add DRM_IOCTL_I915_VBLANK_SWAP definition for userspace code that may want
to use ioctl() instead of drmCommandWriteRead().
Actually make the existing ioctls for adding and removing drawables do
something useful, and add another ioctl for the X server to update drawable
information. The only kind of drawable information tracked so far is cliprects.
When the vertical blank interrupt is enabled for both pipes, pipe A is
considered primary and pipe B secondary. When it's only enabled for one pipe,
it's always considered primary for backwards compatibility.
This takes up two more ring buffer entries per rectangle blitted but makes sure
the blit is performed top to bottom, reducing the likelyhood of tearing.
Change the fence object interface somewhat to allow some more flexibility.
Make list IOCTLS really restartable.
Try to avoid busy-waits in the kernel using immediate return to user-space with an -EAGAIN.
- Mark the correct RAMIN slots as free (oops)
- Remove a VRAM alloc that shouldn't have been there (oops)
- Move HT init out of firstopen() and into dma_init()
- Setup PFIFO_RAM{HT,FC,RO} in pfifo_init()
The overflows could cause valid offsets to get rejected under some
circumstances, e.g. when the framebuffer resides at the very end of the card's
address space.
0x00 EXE fence. Signals when command stream interpreter has reached the point
where the fence was emitted.
0x01 FLUSH fence. Signals when command stream interpreter has reached the point
where the fence was emitted, and all previous drawing operations have been
completed and flushed.
Implements busy wait (for fastest response time / high CPU) and
lazy wait (User interrupt or timer driven).
Commit 2a47f6bfec caused the CHIP_IS_AGP flag to
get 'restored' with PCI(e) cards. I can't think of a way to fix this without
introducing a (otherwise redundant) CHIP_IS_PCI flag.
Not doing this might waste bus bandwidth or even cause memory corruption or
system crashes on systems that check bus transfers. No such incident has been
reported though.
32-bit physical device addresses are mapped directly to user-tokens. No
duplicate maps are allowed, and the addresses are assumed to be outside
of the range 0x10000000 through 0x30000000. The user-token is identical
to the 32-bit physical start-address of the map.
64-bit physical device addressed are mapped to user-tokens in the range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
Other map types, like upcoming TTM maps are mapped to user-tokens in the
range
0x10000000 to 0x30000000 with page-size increments. The user_token should
not be interpreted as an address.
This keeps compatibility with buggy drivers, while still implementing a
hashed map lookup. The SiS and via device driver major bumps are
reverted.
0x10000000 to 0x90000000 in PAGE_SIZE increments.
Implement hashed map lookups.
This potentially breaks both 2D and 3D drivers. If so, the corresponding
2D and 3D driver should be fixed, and it's corresponding drm device driver
should have its major bumped as soon as possible.
Bump sis and via drm device driver majors.
The SiS and Unichrome 3D drivers are fixed in Mesa CVS HEAD and
mesa_6_4_branch.
i915 vblanks can be generated from either pipe a or b, however a disabled
pipe generates no interrupts. This change allows the X server to select
which pipe generates vblank interrupts.
more problems with flickering (bug #6637). drm may not be appropriate
place for this, since doing that flush there might both be overkill and
insufficient in some cases. However, it's hard to figure out when that
flush is needed, so this has to suffice. There does not seem to be a
performance penalty associated with it.
Linux, which broke on FreeBSD. DRM_COPY_*_IOCTL checks for the size
parameter matching the ioctl's command size there, since the copin/out
happened earlier.
chips may be problematic). Leave the existing entries for new chips in
though. Remove ids not known by ddx (secondary ids, non-existant,...).
Correct some entries (name/family). Make the radeon family enum look
more alike the ddx/dri versions. See #5413
that particular file. Its contents have changed a good bit since the
original sis code, and the original sis code didn't care much about
attribution since it routinely disclaims Precision Insight/VA Linux
from responsibility. Also, adjust formatting around license headers
(have a comment open immediately before the "Copyright" line, not as a
runon of any previous comments) for automatic processing into FreeBSD,
where /*- is used to signal the beginning of license headers for
automatic compilation of license lists.
single DRM_COPY_FROM_USER rather than DRM_VERIFYAREA_READ followed by
tons of DRM_COPY_FROM_USER_UNCHECKED. I don't like the look of the
temporary space allocation, but I like the simplification in the rest
of the file. Tested with glxgears, tuxracer, and q3 on a savage4.
drm_mtrr_{add,del} for handling the MTRR setup. Still has a LOR issue
with DRM_VERIFYAREA_READ/DRM_COPY_FROM_USER_UNCHECKED in savage_bci.c
-- this won't work with the fine-grained locking in use, and just doing
a single copyin to a temporary will probably work fine. Also note that
the module leaks approximately 4 kb on unload.
up a good bit, I think. Also, remove the agp_uninit() function which
has lain around as a noop for years now. The FreeBSD DRM is now all
compiling, with the exception of via. One known sleeping-with-lock-held
issue remains.
radeon_cp.c to use a drm_local_map_t-type mapping (drm_core_ioremap
rather than drm_ioremap), which contains private device mapping
information on BSD. I also changed the ati_pcigart interface to use
"void *" for pointers to kva rather than "unsigned long". While PCIGART
support appears to be broken on FreeBSD currently, I think this is not
new, and BusType PCI remains working on my r100 in Linux.
drm_agp_foo_ioctl pair. Modifies the MGA DRM to use the drm_agp_foo
functions instead of the drm_foo_agp functions. The drm_foo_agp
functions are no longer exported by drm.ko.
Ensures that dma->seg_count and dma->page_count are properly set in
drm_addbufs_{agp,sg,fb}. drm_addbufs_pci was already correct.
Ensures that mga_do_agp_dma_bootstrap correctly sets agp_buffer_token.
At this point PCI DMA is still broken.
Xorg bug: #4797 Reviewed by: Dave Airlie, Eric Anholt Signed-off-by: Ian
Romanick <idr@us.ibm.com>
mga_do_agp_dma_bootstrap fails causes problems if
mga_do_pci_dma_bootstrap succeeds. This commit makes it possible to do
a "minimal" clean up instead. I'm still trying to figure out what is
causing the failures in mga_do_agp_dma_bootstrap...
Signed-off-by: Ian Romanick <idr@us.ibm.com>
R200_EMIT_PP_TXCTLALL_0-5 (replaces R200_EMIT_PP_TXFILTER_0-5, 2 more
regs) and R200_EMIT_ATF_TFACTOR (replaces R200_EMIT_TFACTOR_0 (8 consts
instead of 6)
- Comment out the "is this mapping/bufs in allocated AGP" bits in BSD
because they break mga (which uses AGP allocation that doesn't track
entries). It's not a security issue when we still have the related
ioctls marked root-only.
- Apply some power-of-two alignment restrictions to hopefully avoid some
panicing in bad cases of drm_pci_alloc() on FreeBSD.
- Add verbosity to some error handling that I found useful while debugging.
me to match other drivers and avoid ifdeffing. The linux via_drv.c will
be moved from shared-core to linux-core soon by repocopy.
Submitted by: Jake Burkholder <jake@FreeBSD.org> Tested by: unichrome
caller on fb / agp memory alloc and free. Otherwise malicious clients
can register allocations on other clients or free memory used by other
clients which will lead to severe memory manager inconsistensies.
understandable: preinit -> load postinit -> (removed) presetup ->
firstopen postsetup -> (removed) open_helper -> open prerelease ->
preclose free_filp_priv -> postclose pretakedown -> lastclose
postcleanup -> unload release -> reclaim_buffers_locked version ->
(removed)
postinit and version were replaced with generic code in the Linux DRM
(drivers now set their version numbers and description in the driver
structure, like on BSD). postsetup wasn't used at all. Fixes the savage
hooks for initializing and tearing down mappings at the right times.
Testing involved at least starting X, running glxgears, killing
glxgears, exiting X, and repeating.
Tested on: FreeBSD (g200, g400, r200, r128) Linux (r200, savage4)
Jesse Barnes
Jesse Barnes
Jesse Barnes
Thomas Hellstrom
Oliver McFadden
Alex Deucher
Wang Zhenyu
Dave Airlie
Maurice van der Pot
Dave Airlie
Jung-uk Kim
Thomas Gleixner
Alan Hourihane
Matthieu Castet
Keith Packard
Michel Dänzer
George Sapountzis
Stephane Marchesin
Dave Airlie
David Airlie
Jakob Bornecrantz
Ben Skeggs
Eric Anholt
Nian Wu
Patrice Mandin
Nian Wu
B. Rathmann
Aapo Tahkola
Ben Skeggs
Zou Nan hai
Jeremy Kolb
Dave Jones
Matthieu Castet
Haihao Xiang
Keith Packard
Ben Skeggs
Dave Airlie
Dave Airlie
Michael Karcher
Roland Scheidegger
Felix Kühling
Anish Mistry
Roland Scheidegger
Dave Airlie
Alan Hourihane
Adam Jackson
Thomas Hellstrom
Keith Packard
Brian Paul
Eric Anholt
Adam Jackson
Aapo Tahkola
Thomas Hellstrom
Keith Whitwell
Ian Romanick
Vladimir Dergachev
Jon Smirl