Ryan C. Gordon
Kristian says you can't do it with Wayland, and that going forward, it'll just handle whatever you throw at it anyhow.
https://twitter.com/hoegsberg/status/816148272402165761
So I say we mark it SDL_PIXELFORMAT_RGB888, which is what my X11 display currently reports, and leave it at that.
kaisyu
In case of OpenGLES, the sequences of loading and unloading driver library should be like that:
SDL_Init
...
SDL_GL_LoadLibrary
SDL_EGL_LoadLibrary
...
SDL_Quit
...
SDL_GL_UnloadLibrary
SDL_EGL_UnloadLibrary
...
However, according to my test results, the varible '_this->gl_config.driver_loaded' does not allow 'SDL_GL_UnloadLibrary' to call 'SDL_EGL_UnloadLibrary'.
Coriiander
This notice is about a misplaced comment.
Often times when we use an #if #endif sequence, the #endif is followed by a comment to indicate what #if statement it belonged to. The SDL_xaudio2.c file contains a misplaced comment, as follows (I stripped the other comments):
#ifdef __GNUC__
# define SDL_XAUDIO2_HAS_SDK 1
#elif defined(__WINRT__)
# define SDL_XAUDIO2_HAS_SDK
#include "SDL_xaudio2.h"
#else
#if 0
#include <dxsdkver.h>
#if (!defined(_DXSDK_BUILD_MAJOR) || (_DXSDK_BUILD_MAJOR < 1284))
# pragma message("Your DirectX SDK is too old. Disabling XAudio2 support.")
#else
# define SDL_XAUDIO2_HAS_SDK 1
#endif
#endif
#endif /* 0 */
That final /* 0 */ should be moved one line up. Like this (I tabbed it out for you to make it more clear):
Tristan
The internal SDL_vsnprintf implementation accesses memory outside buffer. The bug existed also inside the format (%) processing, which was fixed with Bug 3441.
But there is still an invalid access, if we do not have any format inside the source string and the destination string is shorter than the format string. You can use any string for this test, as long it is longer than the buffer.
Example:
va_list argList;
char buffer[4];
SDL_vsnprintf(buffer, sizeof(buffer), "Testing", argList);
The bug is located on the 'else' branch of the format char test:
while (*fmt) {
if (*fmt == '%') {
...
} else {
if (left > 1) {
*text = *fmt;
--left;
}
++fmt;
++text;
}
}
if (left > 0) {
*text = '\0';
}
As you can see that text is always incremented, even when left is already one. When then on the last lines, *text is assigned the NULL char, the pointer is located outside bounds.
Intellectual Kitty
In SDL_video.c, on line #1756, in SDL_SetWindowPosition (from today's distribution, 12-31-2016, https://hg.libsdl.org/SDL/shortlog/bf19e0c84483):
if (displayIndex > _this->num_displays) {
should be:
if (displayIndex >= _this->num_displays) {
felix
Compiling even a simple SDL2 'hello world' program with gcc -Wstrict-prototypes (GCC 6.2.1) results in warnings like:
/usr/include/SDL2/SDL_gamecontroller.h:143:1: attention : function declaration isn't a prototype [-Wstrict-prototypes]
extern DECLSPEC int SDLCALL SDL_GameControllerNumMappings();
^~~~~~
It seems there is a missing 'void' between the parentheses.
This was a leftover of simplifying the resamplers down from autogenerated
code; I forgot to make something that the generator hardcoded into something
variable.
Fixes Bugzilla #3507.
Ozkan Sezer
http://hg.libsdl.org/SDL/rev/464a2676d8ab seems to have
forgotten removing the return from SDL_dynapi_procs.h, and this patch
does that. Without it, MSVC warns:
c:\sdl2\src\dynapi\SDL_dynapi_procs.h(598) : warning C4098:
'SDL_GL_SwapWindow_DEFAULT' : 'void' function returning a value
c:\sdl2\src\dynapi\SDL_dynapi_procs.h(598) : warning C4098:
'SDL_GL_SwapWindow' : 'void' function returning a value
Ozkan Sezer
This adds the name 'ad' to two unnamed unions in edid.h
and adjusts edid-parse.c for it. Nameless unions are not supported in
ancient gcc, which I happened to use on one of my ancient setups.
These fixes are lumped into two categories:
1. add new file, SDL_dataqueue.c, to UWP/WinRT build-inputs (via MSVC project
files)
2. implement a temporary, hack-fix for a build error in SDL_xinputjoystick.c.
Win32's Raw Input APIs are, unfortunately, not available for use in UWP/WinRT
APIs. There does appear to be a replacement API, available in the
Windows.Devices.HumanInterfaceDevice namespace.
This fix should be sufficient to get SDL compiling again, without affecting
Win32 builds, however using the UWP/WinRT API (in UWP/WinRT builds) would
almost certainly be better (for UWP/WinRT builds).
TODO: research Windows.Devices.HumanInterfaceDevice, and use that if and as
appropriate.
This currently doesn't affect absolute motion, which would need to be implemented on each windowing system so the cursor matches the reported mouse coordinates.
Diego
I was previously unaware that rotating the device to a different orientation when the keyboard is shown causes a keyboardWillHide followed by a keyboardWillShow notification. The previous patch would then mistakenly StopTextInput when rotating. This patch fixes that by checking if the device is rotating before stopping text input.
Ozkan Sezer
With rev. 10651, i.e. http://hg.libsdl.org/SDL/rev/747a6a795b21 ,
SDL2 - OS X builds fail to run on 10.6 (my setup: i686 / 10.6.8)
because the symbol _IOPMAssertionCreateWithDescription is missing.
The SDK listing it for 10.7+ does seem correct. Reverting r10651
and rebuilding makes it to function again.
Simon Hug
The SDL_BlitScaled function runs into an access violation for specific blit coordinates and surface sizes. The attached testcase blits a 800x600 surface to a 1280x720 surface at the coordinates -640,-345 scaled to 1280x720. The blit function that moves the data then runs over and reads after the pixel data from the src surface causing an access violation.
I can't say where exactly it goes wrong, but I think it could have something to do with the rounding in SDL_UpperBlitScaled. final_src.y is 288 and final_src.h is 313. Together that's 601, which I believe is one too much, but I just don't know the code enough to make sure that's the problem.
Sylvain
I think this patch fix the issue, but maybe it's worth re-writing "SDL_UpperBlitScaled" using SDL_FRect.
The non-deprecated approach (IOPMAssertion) already exists in SDL, and is
available in Mac OS X 10.6 and later (although it was incorrectly listed as
10.7 and later in SDL). Since SDL now requires 10.6 or later, this is no
longer conditionally used.
realitix
SDL2 allows to create widow and to get information through SDL_SysWMinfo.
But it misses something, with Vulkan, you need the HWND and HINSTANCE of the window for Win32 system.
Sadly, SDL2 provides only HWND but not HINSTANCE.
In some context, it can be difficult to get the HINSTANCE, indeed, I'm using pySDL2 (Python) and I can only access properties that SDL2 gives me.
I have to use a dirty trick like that to get the HINSTANCE: (https://raw.githubusercontent.com/bglgwyng/pyVulkan/master/examples/win32misc.py)
felix
Building SDL 2.0.5, or even the Mercurial snapshot (r10608) with GCC 6.2.1 and --enable-video-directfb generates a number of compiler diagnostics and fails.
Simon Hug
The software renderer produces incorrect results when blending textures at an angle with certain blend modes. It seems that there were some edge cases that weren't considered when the SW_RenderCopyEx function was last changed. Or another bug possibly covered up the problem. (More on that in another bug report.)
Most of the issues come from the fact that the rotating function sets a black colorkey. This is problematic because black is most likely appearing in the surface and the final blit will ignore these pixels. Unless a colorkey is already set (the software renderer currently never sets one), it's very hard to find a free color. Of course it could scan over the whole image until one is found, but that seems inefficient.
The following blend modes have issues when drawn at an angle.
NONE: The black pixels get ignored, making them essentially transparent. This breaks the 'dstRGBA = srcRGBA' definition of the NONE blend mode.
MOD: Again, the black pixels get ignored. This also breaks the 'dstRGB = dstRGB * srcRGB' definition of the MOD blend mode, where black pixels would make the destination black as well. A white colorkey will work though, with some preparations.
BLEND: There are some issues when blending a texture with a translucent RGBA target texture. I - uh - forgot what the problem here exactly is.
This patch fixes the issues mentioned above. It mainly changes the code so it tries to do things without the colorkey and removes the automatic format conversion part from the SDLgfx_rotateSurface function. Getting the format right is something the caller has to do now and the required code has been added to the SW_RenderCopyEx function.
There's a small change to the SW_CreateTexture function. RLE encoding a surface with an alpha mask can be a lossy process. Depending on how the user uses the RGBA channels, this may be undesired. The change that surfaces with an alpha mask don't get encoded makes the software renderer consistent with the other renderers.
The SW_RenderCopyEx function now does these steps: Lock the source surface if necessary. Create a clone of the source by using the pixel buffer directly. Check the format and set a flag if a conversion is necessary. Check if scaling or cropping is necessary and set the flag for that as well. Check if color and alpha modulation has to be done before the rotate. Check if the source is an opaque surface. If not, it creates a mask surface that is necessary for the NONE blend mode. If any of the flags were set, a new surface is created and the source will be converted, scaled, cropped, and modulated. The rest of the function stays somewhat the same. The mask also needs to be rotated of course and then there is the NONE blend mode...
It's surprisingly hard to get the pixel from a rotated surface to the destination buffer without affecting the pixel outside the rotated area. I found a way to do this with three blits which is pretty hard on the performance. Perhaps someone has an idea how to do this faster?
As mentioned above, the SDLgfx_rotateSurface now only takes 8-bit paletted or 32-bit with alpha mask surfaces. It additionally sets the new surfaces up for the MOD blend mode.
I shortly tested the 8-bit path of SDLgfx_rotateSurface and it seemed to work so far. This path is not used by the software renderer anyway.
Vitaly Novichkov
Okay, when I researched code and algorithm, I tried to replace condition "while(dst >= target)" with "while(dst > target)" and crashes are gone.
Seems on some moments it tries to write into the place before memory block begin, therefore phantom crashes appearing after some moments.
Sylvain 2016-11-07 08:49:34 UTC
when rotated +90 or -90, some transparent lines appears, though there is no Alpha or ColorKey.
if you set a dummy colorkey, it will remove the line ...
if you set a some alpha mod, the +90/-90 get transparent but not the 0/180 ...
x414e54
It is a bit of a pain to update the library or rely on whatever version the user has on their computer for default mappings.
So providing an easily updatable text file via SDL_GameControllerAddMappingsFromFile is still currently the most viable way. However using this replaces all mappings provided by the SDL_HINT_GAMECONTROLLERCONFIG environment variable which may have come from the user's custom Steam mapping.
There should be an easy way for games to supply extra game controller mappings to fill in the differences between SDL versions without it clobbering the SDL_HINT_GAMECONTROLLERCONFIG environment variable.
Internally the mappings could use a priority system and if the priority is lower then it will not overwrite the mappings.
For now it just assumes SDL_HINT_GAMECONTROLLERCONFIG is the highest priority, the default hardcoded are the lowest and anything set via the API is medium.
Mark Pizzolato
On Windows with Visual Studio, when building SDL as a static library using the x86 (32bit) mode, several intrinsic operations are implemented in code in SDL_stdlib.c.
One of these, _allshr() is not properly implemented and fails for some input. As a result, some operations on 64bit data elements (long long) don't always work.
I classified this bug as a blocker since things absolutely don't work when the affected code is invoked. The affected code is only invoked when SDL is compiled in x86 mode on Visual Studio when building a SDL as a static library. This build environment isn't common, and hence the bug hasn't been noticed previously.
I reopened#2537 and mentioned this problem and provided a fix. That fix is provided again here along with test code which could be added to some of the SDL test code. This test code verifies that the x86 intrinsic routines produce the same results as the native x64 instructions which these routines emulate under the Microsoft compiler. The point of the tests is to make sure that Visual Studio x86 code produces the same results as Visual Studio x64 code. Some of the arguments (or boundary conditions) may produce different results on other compiler environments, so the tests really shouldn't be run on all compilers. The test driver only actually exercised code when the compiler defines _MSC_VER, so the driver can generically be invoked without issue.
Ozkan Sezer
On systems with old glibc, such mine with glibc-2.8, the following warning
is issued and is fixed easily by defining _GNU_SOURCE:
/home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c: In function 'CalculateXRandRRefreshRate':
/home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: implicit declaration of function 'round'
/home/me/SDL2-2.0.5/src/video/x11/SDL_x11modes.c:263: warning: incompatible implicit declaration of built-in function 'round'
x414e54
I have implemented Drag and Drop and Clipboard support for Wayland.
Drag and dropping files from nautilus to the testdropfile application seems to work and also copy and paste.
This no longer uses a script to generate code for every possible type
conversion or resampler. This caused a bloat in binary size and and compile
times. Now we use a handful of more generic functions and assume staying in
the CPU cache is the most important thing anyhow.
This shrinks the size of the final build (in this case: macOS X amd64, -Os to
optimize for size) by 15%. When compiling on a single core, build times drop
by about 15% too (although the previous cost was largely hidden by multicore
builds).
Alex Baines
I realized overnight that my patch probably broke text input events with UIM, and I confirmed that it does. Can't believe I overlooked that... I've been making stupid mistakes in these patches recently, sorry.
Anyway, *this* one seems to fix it properly. Knowing my luck it probably breaks something else.
Patch uses XkbFreeKeyboard to free the memory returned by XkbGetMap.
Earlier implementation called XkbFreeClientMap which frees all the maps
but not data->xkb structure itself, XkbFreeKeyboard will free maps and
the structure.
Kai Sterker
SDL2 on Haiku so far uses Haiku-specific APIs for loading dynamic objects as add-ons, instead of using dlopen to load them as libraries. This, for example, leads to SDL_mixer not being able to load its audio backends, when compiled with standard settings.
As discussed at https://www.freelists.org/post/haikuports/SDL2-mixer-ogg-music-not-playing-and-other-stuff,2 , the best way to deal with this would be using dlopen instead of load_add_on. The following patch implements this change by dropping the Haiku-specific bits and using dlopen instead.
/home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c: In function 'calc_swizzle32':
/home/fedora/SDL2-2.0.5/src/video/SDL_blit_N.c:127:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
const vector unsigned char plus = VECUINT8_LITERAL(0x00, 0x00, 0x00, 0x00,
^
Kai Sterker
Apparently, SDL2 on Haiku does not generate SDL_TEXTINPUT events.
Attached is a patch that adds this functionality.
Tested with SDLs own checkkeys program and different keymaps as well as my own SDL application and German keyboard layout to verify it generates the expected input.
Albert Casals
On a RaspberryPI, it might become convenient to specify the Dispmanx layer SDL uses.
Currently, it is hardcoded to be 10000 to sit above most applications.
This can be specially useful when integrating other graphical apps and frameworks like OMXplayer, QT5 etc.. in order to have more flexibility on their Z-order.
ny00
Unfortunately, simply checking the return codes of "onNativePadDown/Up" as previously done has its own issue:
If an SDL joystick is connected *and* opened, then a proper KeyEvent, say with keycode KEYCODE_BUTTON_1, should lead to an SDL joystick button event as expected.
If, however, the joystick was *not* opened, then "onNativePadDown/Up" will return a negative value, so before the commit from bug 3426, you could unexpectedly get a keyboard event. (In practice, you'll just get a log message, since KEYCODE_BUTTON_1 has no mapping to a proper SDL_ScanCode value, but it's still an problem).
What should still be done, though, is checking the key code itself. We do have the KeyEvent.isGamepadButton method, but according my test, it returns "true" exactly (and only) for the KEYCODE_BUTTON* values, and not for KEYCODE_DPAD* or any other key code.
Here is a possible solution:
- Do check the return codes of "onNativePadDown/Up" as previously done.
- In addition, in "Android_OnPadDown/Up" from src/joystick/android/SDL_sysjoystick.c, 0 should *always* be returned in case the key code can be translated to an SDL_joystick button; Even if no matching joystick can be found.
Philipp Wiesemann
Maybe the fault is in the SDL_VIDEO_DRIVER_WINDOWS section in SDL_InitSubSystem() of "src/SDL.c". Because there only SDL_INIT_JOYSTICK is checked. The flags are adapted for SDL_INIT_GAMECONTROLLER afterwards.
Eric Wasylishen
The patch makes StartTextInput/StopTextInput call Xutf8ResetIC ( https://www.x.org/releases/X11R7.5/doc/man/man3/XmbResetIC.3.html ) on the XIC of all SDL windows.
This fixes my use case in Quakespasm (Ubuntu 16.04, system keyboard layout set to German. Type the '^' dead key, which opens Quakespasm's developer console and calls SDL_StartTextInput, then press 'e'. I expect the dead key to be ignored.)
Also, here is a patch for sdl2's "checkkeys" for testing this: https://bugzilla-attachments.libsdl.org/attachment.cgi?id=2451
Olav Sorensen
After a drag and drop event, any following mouse button input (down/up) doesn't generate an event. Clicking any mouse button a *second* time generates an event like it should.
Further investigation shows that the new SDL_HINT_MOUSE_FOCUS_CLICKTHROUGH logic also causes this issue in other cases, like the first time you open the program and click the mouse.
Simon Hug
There are currently three entry points in the SDL2_main code for windows: main, wmain and WinMain. Only the latter two properly convert the arguments to UTF-8.
Console applications linked with MSVC will always link with the main entry point (wmain has to be selected by manually setting the entry point). This makes it likely that such programs will not have proper unicode arguments.
Sylvain
After a long time, I found out more clearly what was going wrong.
The native libraries should be built with a "APP_PLATFORM" as low as possible.
Ideally, APP_PLATFORM should be equals to the minSdkVersion of the AndroidManifest.xml
So that the application never runs on a lower APP_PLATFORM than it has been built for.
An additional good patch would be to write explicitly in "jni/Application.mk": APP_PLATFORM=android-10
(If no APP_PLATFORM is set, the "targetSdkVersion" of the AndroidManifest.xml is applied as an APP_PLATFORM to the native libraries. And currently, this is bad, because targetSdkVersion is 12, whereas minSdkLevel is 10.
And in fact, there is a warning from ndk: "Android NDK: WARNING: APP_PLATFORM android-12 is larger than android:minSdkVersion 10 in ./AndroidManifest.xml".)
to precise what happened in the initial reported test-case:
Let say the "c" code contains a call to "srand()".
with APP_PLATFORM=android-21, libSDL2.so contains a undef reference to "srand()".
with APP_PLATFORM=android-10, libSDL2.so contains a undef reference to "srand48()".
but srand() is missing on devices with APP_PLATFORM=android-10 (it was in fact replaced by srand48()).
So, if you build for android-21 (where srand() is available), you will really have a call to "srand()" and it will fail on android-10.
That was the issue. The path tried to fix this by in fact always calling srand48().
SDL patches that were applied are beneficial anyway, there are implicitly allowing they backward compatibility of using android-21 on a android-10 platform.
It can be helpful in case you want to target a higher APP_PLATFORM than minSdkVersion to have potentially access to more functions.
Eg you want to have access to GLES3 functions (or other) of "android-21". But, if dlopen() fails (on android-10), you do a fall-back to GLES2.
Robert Folland
When running this little test program with SDL2 on Wayland it often crashes in SDL_Init.
From a backtrace it is apparent that there is a race condition in creating a xkb_context_ref. Sometimes it is 0x0.
By moving the relevant lines higher up in Wayland_VideoInit (in SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302) this seems to get fixed.
I moved the call to WAYLAND_xkb_context_new() up to before the call to WAYLAND_wl_display_connect().
Here is the test program (just a loop of init and quit), and a backtrace from gdb:
#include <cstdio>
#include <stdlib.h>
#include <SDL2/SDL.h>
#include <unistd.h>
#include <iostream>
int main(int argc, char **argv)
{
int count = atoi(argv[1]);
for (int i = 0; i < count; i++) {
std::cout << "Init " << i << std::endl;
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION,
"Couldn't initialize SDL: %s\n",
SDL_GetError());
return 1;
}
std::cout << "Quit" << std::endl;
SDL_Quit();
}
return 0;
}
Init 12
Quit
Init 13
Program received signal SIGSEGV, Segmentation fault.
xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156
156 ctx->refcnt++;
(gdb) bt
#0 xkb_context_ref (ctx=ctx@entry=0x0) at src/context.c:156
#1 0x00007ffff5e1cd4c in xkb_keymap_new (ctx=0x0, format=XKB_KEYMAP_FORMAT_TEXT_V1, flags=flags@entry=XKB_KEYMAP_COMPILE_NO_FLAGS) at src/keymap-priv.c:65
#2 0x00007ffff5e1c6cc in xkb_keymap_new_from_buffer (ctx=<optimized out>,
buffer=0x7ffff7fd5000 "xkb_keymap {\nxkb_keycodes \"(unnamed)\" {\n\tminimum = 8;\n\tmaximum = 255;\n\t<ESC>", ' ' <repeats 16 times>, "= 9;\n\t<AE01>", ' ' <re
peats 15 times>, "= 10;\n\t<AE02>", ' ' <repeats 15 times>, "= 11;\n\t<AE03>", ' ' <repeats 15 times>, "= 12;\n\t<AE04>", ' ' <repeats 12 times>..., length=48090,
format=<optimized out>, flags=<optimized out>) at src/keymap.c:191
#3 0x00007ffff7b8ea4e in keyboard_handle_keymap (data=0x6169b0, keyboard=<optimized out>, format=<optimized out>, fd=5, size=48091)
at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandevents.c:269
#4 0x00007ffff64501f0 in ffi_call_unix64 () from /usr/lib/libffi.so.6
#5 0x00007ffff644fc58 in ffi_call () from /usr/lib/libffi.so.6
#6 0x00007ffff665be3e in wl_closure_invoke (closure=closure@entry=0x61f000, flags=flags@entry=1, target=<optimized out>, target@entry=0x616d20,
opcode=opcode@entry=0, data=<optimized out>) at src/connection.c:949
#7 0x00007ffff6658be0 in dispatch_event (display=<optimized out>, queue=<optimized out>) at src/wayland-client.c:1274
#8 0x00007ffff6659db4 in dispatch_queue (queue=0x617398, display=0x6172d0) at src/wayland-client.c:1420
#9 wl_display_dispatch_queue_pending (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1662
#10 0x00007ffff665a0cf in wl_display_roundtrip_queue (display=0x6172d0, queue=0x617398) at src/wayland-client.c:1085
#11 0x00007ffff7b8faa0 in Wayland_VideoInit (_this=<optimized out>) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/wayland/SDL_waylandvideo.c:302
#12 0x00007ffff7b7aed6 in SDL_VideoInit_REAL (driver_name=<optimized out>, driver_name@entry=0x0) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/video/SDL_video.c:513
#13 0x00007ffff7ae0ee7 in SDL_InitSubSystem_REAL (flags=16416) at /home/vlab/abs/sdl2/src/SDL2-2.0.4/src/SDL.c:173
#14 0x0000000000400b24 in main (argc=2, argv=0x7fffffffebb8) at vplay-init.cpp:13
(gdb)
Eric wing
Sometimes an SDL_assert triggers at RPI_WarpMouseGlobal
src/video/raspberry/SDL_rpimouse.c:232 'update'.
It doesn't always reproduce, but it seems to happen when you really bog down the system and the event loop can't update for awhile.
The first time I hit this, I wasn't even using the mouse. I don't call any warp mouse functions either.
I can usually reproduce with a simple program that runs an expensive blocking CPU series of functions which blocks the main loop until complete (can be up to 10 seconds).
Sometimes this assertion gets triggered after that. I'm not sure if
they are related or coincidental.
Disabling the SDL_asserts when compiling SDL will avoid this problem. I actually haven't seen any problems with the mouse when I do this.
On a Raspberry Pi 2 running Raspbian Jessie.
Call SDL_GL_GetDrawableSize() directly because we may be in the initialization path and SDL_GetRendererOutputSize() will fail because the renderer magic isn't set up yet.
Daniel Gibson
Ok, I followed the simple approach of just making SDL_PIXELFORMAT_RGBA32 an alias of SDL_PIXELFORMAT_RGBA8888/SDL_PIXELFORMAT_ABGR8888, depending on endianess. And I did the same for SDL_PIXELFORMAT_ARGB32, .._BGRA, .._ABGR.
SDL_GetPixelFormatName() will of course return SDL_PIXELFORMAT_RGBA8888 (or SDL_PIXELFORMAT_ABGR8888) instead of SDL_PIXELFORMAT_RGBA32, but as long as that's mentioned in the docs it shouldn't be a problem.
Apparently some systems see "hw:", some see "default:" and some see
"sysdefault:" (and maybe others!). My workstation sees both "hw:" and
"sysdefault:" ...
Try to find a prefix we like and prioritize the prefixes we (think) we want
most. If everything else fails, if there's a "default" (not a prefix) device
name, list that by itself so the user gets _something_ here.
If we can't find a prefix we like _and_ there's no "default" device, report
no hardware found at all.
Weitian Leung
Just moved ibus direct call to SDL_IME_* related functions, and adds fcitx IME support (uses DBus, too),
enable with env: SDL_IM_MODULE=fcitx (ibus still the default one)
D39 does not support negative viewport values which the current implementation relies on.
D3D11 does support negative viewport values so that will continue working.
Refer to Bug 2799.
x414e54
Wayland will sometimes send empty resize events (0 width and 0 height) to the client. I have not worked out the exact conditions a client would receive these but I can assume it might be if the window is offscreen or not mapped yet.
This causes issues with some SDL clients as they receive the 0x0 event and unexpected resize event or might not request to resize back to the correct size.
As per the wl_shell Wayland spec configure events are only a suggestion and the client is free to ignore or pick a different size (this is how min/max and fixed aspect ratio is supped to be implemented).
A patch is attached but is just the first iteration and I will fix any issues such as checking for FULLSCREEN/MAXIMIZED or RESIZABLE flags unless someone else fixes this first.
I have update to take into account non resizable and fullscreen windows. Also adding in maximize/restore and title functions for Wayland.
Darren Kulp
The dummy video driver is not available on Mac OS X if SDL_VIDEO_OPENGL is set at library compilation time.
In src/video/SDL_video.c, there is a compile-time check in SDL_CreateWindow() for (SDL_VIDEO_OPENGL && __MACOSX__). When it succeeds, SDL_WINDOW_OPENGL is always requested. Since the dummy video driver does not supply an OpenGL implementation, the error "No OpenGL support in video driver" is supplied to the user, and SDL_CreateWindow() is exited early.
Adam M.
When doing a rotated texture copy with the software renderer, where the angle is a multiple of 90 degrees, one or two edges of the image get cut off. This is because of the following line in sw_rotate.c:
if ((unsigned)dx < (unsigned)sw && (unsigned)dy < (unsigned)sh) {
which is effectively saying:
if (dx >= 0 && dx < src->w-1 && dy >= 0 && dy < src->h-1) {
As a result, it doesn't process pixels in the right column or bottom row of the source image (except when they're accessed as part of the bilinear filtering for nearby pixels). This causes it to look like the edges are cut off, and it's especially obvious with an exact multiple of 90 degrees.
Nitz
In function SDLgfx_rotateSurface:
rz_dst =
SDL_CreateRGBSurface(SDL_SWSURFACE, dstwidth, dstheight + GUARD_ROWS,
rz_src->format->Rmask, rz_src->format->Gmask,
rz_src->format->Bmask, rz_src->format->Amask);
Here rz_src get De-referenced without NULL check, which is risky.
Simon Sandstr?m
As stated in Summary. The switch statement will execute the default case and set a SDL error message: "SDL_MixAudio(): unknown audio format".
There are atleast two more problems here:
1. SDL_MixAudioFormat does not notify the user that an error has occured and that a SDL error message was set. It took me awhile to understand why I couldn't mix down the volume on my AUDIO_U16LSB formatted audio stream.. until I started digging in the SDL source code.
2. The error message is incorrect, it should read: "SDL_MixAudioFormat(): unknown audio format".
Daniel Gibson
Currently, SDL_CreateRGBSurface() and SDL_CreateRGBSurfaceFrom() take Uint32 masks for RGBA to "describe" the Pixelformat of the surface.
Internally those value are only used to map to one of the SDL_PIXELFORMAT_* enum values that are used for further processing.
I think it would be both handy and more efficient to be able to specify SDL_PIXELFORMAT_* yourself without using SDL_PixelFormatEnumToMasks() to create masks first, so I implemented functions that do that:
SDL_CreateRGBSurfaceWithFormat() and SDL_CreateRGBSurfaceWithFormatFrom() which are like the versions without "WithFormat" but instead of taking 4 Uint32s for R/G/B/A masks, they take one for a SDL_PIXELFORMAT_* enum value.
Together with https://bugzilla.libsdl.org/show_bug.cgi?id=2923 creating a SDL_Surface* from RGBA data (e.g. from stb_image) is as easy as
surf = SDL_SDL_CreateRGBSurfaceWithFormat(0, w, h, bppToUse*8, SDL_PIXELFORMAT_RGBA32);
Ryan C. Gordon
We still include iconv.h in SDL_stdinc.h, probably because this header might have referenced the native iconv functions and types directly. Since these are hidden behind a stable ABI now and never just a #define for the system iconv, we shouldn't need this header included from a public SDL header anymore, slowing down external apps compiles and pulling tons of stuff into the namespace.
Jan Klass
Not sure if this is limited to the joystick subsystem,
but I created a minimal program for reproducibility,
which is attached.
The issue occurs with my gamepad Razer Onza (an xbox-style gamepad) plugged in.
On initialization, the gamepad is being recognized.
After quitting the subsystem, the poll will receive the joystick added event,
which it instantly handles itself, calling SDL_SYS_JoystickDetect again,
which this time calls IDirectInput8_EnumDevices with dinput = NULL (after it was released on quit).
This seems to lead to an access violation within said function, which I have no source for.
Jan Hellwig
On Windows, you are able to navigate between the buttons on a MessageBox that was created using SDL_ShowMessageBox using the arrow keys. However, if you press the left arrow key, the selection jumps to the button on the right of the currently selected one (and vice versa).
This can be fixed by reversing the order in which the buttons are added to the dialog.
The attached patch files fixes this problem. However the first press of an arrow key leads to the selection of the leftmost or rightmost button on the MessageBox, not to the selection of the button left/right of the one that is selected by default.
Ryochan7
I have been using SDL 2 for a little project that I have been developing for a while. My project is called antimicro and it takes gamepad input and then translates gamepad events into keyboard and mouse events. SDL is used to read the input from an XInput gamepad and it works great for the most part. However, there is one glaring problem that I have encountered.
When a device is unplugged and SDL sends the centered value release events for all axes, buttons, and hats, SDL does not use the proper centered value for the triggers. It pushes an SDL_JOYAXISMOTION event onto the queue with a value of 0 for all axes. That value is converted to around 16,000 for a Game Controller. That value is incorrect for triggers and, in my program, that causes any bindings that are assigned to the triggers to get activated. With most profiles, that will typically mean that a mouse right click and left click will be activated before the device is finally seen as removed and then those bindings are released by antimicro.
Jonas Kulla
At startup time, the single android window is assigned a "windowed" (window->windowed.{w,h}) size based on the current orientation of the mobile device; this size is never updated throughout the lifetime of the app.
This becomes problematic when the app is paused and then resumed in an orientation that it did not start up in. Eventually, 'SDL_OnWindowRestored()' is called, which calls 'SDL_UpdateFullscreenMode()'. This function is very problematic because it is written with a desktop monitor in mind: it tries to find a matching display mode for the windowed size, doesn't find any, and finally applies the windowed size as the fullscreen one. In the end, the windowed size is reported in a RESIZED event, which doesn't correspond to the actual surface size.
To see this in action: Start an orientation aware SDL app in eg. portrait mode, suspend the app, put the device into landscape orientation and resume the app. It will erroneously render in portrait mode (until the device is rotated again).
This tends to be a frequent spot where drivers hang, and the waits were
often unreliable in any case.
Instead, our audio thread now alerts the driver that we're done streaming audio
(which currently XAudio2 uses to alert the system not to warn about the
impending underflow) and then SDL_Delay()'s for a duration that's reasonable
to drain the DMA buffers before closing the device.
This tries to make SDL robust against device drivers that have hung up,
apps don't freeze in catastrophic (but not necessarily uncommon) conditions.
Now we detach the audio thread and let it clean up and don't care if it
never actually runs to completion.
James Zipperer
The problem I was seeing was that the the ALSA hotplug thread would call SDL_RemoveAudioDevice, but my application code was not seeing an SDL_AUDIODEVICEREMOVED event to go along with it. To fix it, I added some code into SDL_RemoveAudioDevice to call SDL_OpenedAudioDeviceDisconnected on the corresponding open audio device. There didn't appear to be a way to cross reference the handle that SDL_RemoveAudioDevice gets and the SDL_AudioDevice pointer that SDL_OpenedAudioDeviceDisconnected needs, so I ended up adding a void *handle field to struct SDL_AudioDevice so that I could do the cross reference.
Is there some other way beside adding a void *handle field to the struct to get the proper information for SDL_OpenedAudioDeviceDisconnected?
James Zipperer
Close the audio device before waiting for the audio thread to complete, which fixes a situation where the audio thread never completes
Add an additional check in the audio thread to see if the device is enabled and bail out if the device is no longer enabled
Joe Thompson
With Direct Input device (MOMO Steering Wheel w/FF)
with SDL 2.0.3,
SDL_HapticOpenFromJoystick() would fail. (Can't set exclusive mode)
Now with 2.0.4 rc1,
SDL_HapticOpenFromJoystick() succeeds but the the returned SDL_Haptic* cannot be used. Calls to SDL_HapticNewEffect() fail with "Haptic error Unable to create effect"
If SDL_HapticOpen() is used instead of HapticOpenFromJoystick(), the device is usable. Calls to HapticNewEffect() succeed with the exact same parameters as the previous failing call.
I have attached a proposed patch for this issue.
When using SDL_HapticOpenFromJoystick(), the original code did not (re)enumerate the axes. This returned a new haptic device with 0 axes. Later, when a new effect is created, SDL_SYS_SetDirection() would set the flags to include DIEFF_SPHERICAL, regardless of what the caller actually set. (see Line 566 in SDL_dinputhaptic.c). This would cause the SDL_HapticNewEffect() to fail (or interpret the coordinates incorreclty.)
The patch moves the call to IDirectInputDevice8_EnumObjects() outside of the if() block so that the axes are (re)enumerated for the new haptic device.
Note: For steering wheels it is common for the joystick to have multiple axes (ie steering, throttle, brake), but the haptic portion of the joystick usually only applies to steering.
Fixes Bugzilla #3441.
"When using internal SDL_vsnprintf(), and source string length is greater
than destination, the final NULL char will be written beyond destination size.
Primary issue that is SDL_strlcpy returns length of source string
(SDL_PrintString()), not how much is written to destination. The destination
ptr is then incremented by this length before the sanity check is done.
Destination string is properly terminated, but an extra NULL char will be
written beyond destination buffer length.
Patch used internally is attached which fixes primary issue with SDL_strlcpy()
in SDL_PrintString() and adjusts sanity checks to increment destination ptr
safely."
Tim McDaniel
Using checkkeys test app:
* Press and hold Caps Lock key.
* checkkeys reports a CapsLock key pressed event and a CapsLock key released event.
* Release Caps Lock key.
* checkkeys reports no further events.
This patch fixes OSX Caps Lock up/down event detection by installing a HID callback.
John Wordsworth
While attempting to integrate CEF (Browser) into an SDL application, we noticed that there were problems on OS X where approximately 50% of the input events were essentially being lost - even when we were using off-screen rendering in CEF and passing through input events manually.
It appears that this problem has been around for a while (see: http://www.magpcss.org/ceforum/viewtopic.php?f=6&t=11141).
Please consider the following patch that fixes this issue. Instead of processing events directly after calling [NSApp nextEventMatchingMask:...] we now pass these events down to NSApp, for processing by an overloaded sendEvent: method. Chromium also forwards events to NSApp in the same way, which means we don't miss events, even if they were originally dequeued by CEF.
Daniel
Seems like check of the visibility of renderer (renderer->hidden) is missing in SDL_RenderCopyEx.
In SDL_RenderCopy it should be done much earlier (after checking support for RenderCopyEx, line 1750).
Michael
In SDL_x11modes.c the CalculateXRandRRefreshRate() function performs integer math on values that may return fractional results. This causes a value that would be calculated as 59.99972... to be returned as 59. In Linux the xrandr command returns 60Hz for this particular display mode yet SDL returns 59Hz.
I suggest this function be updated to correctly round the result of the calculation instead of truncating the result.
Machiel van Hooren
In SDL_dxjoystick.c line 349 there is a constant c_dfDIJoystick2.
However, this constant is aparently also defined in dinput8.lib.
I encountered a linking error when statically linking to SDL:
SDL2_static.lib(SDL_dxjoystick.obj) : error LNK2005: _c_dfDIJoystick2 already defined in dinput8.lib
My application is also linking to dinput8.lib because we rolled our own joystick input and are not using the joystick functionality from SDL.
Patrick Gutlich
The mouse cursor gets corrupted when the mouse moves over the screen edges (right and bottom) a weird type of scaling seems to occur and you end up with a blank square.
tvc
I've spent the last few days implementing touchscreen support in core/linux/SDL_evdev.c. It's fairly rudimentary at the moment, as can be seen from the multiple TODO's and FIXME's littered throughout, but I'm mainly submitting this patch for review. I've tested this patch on my Raspberry Pi 2 with the official touchscreen and it works fantastically, reporting all 10 multitouch points. I'm happy to work on this further, the evdev logic also needs a bit of a cleanup I think (I may have included a few changes). But if it's good enough in its current state to be committed then I'm sure there'd be plenty of people pleased, as currently the only other framework/library that supports touchscreens on the Raspberry Pi is Kivy.
Fritzor
Source Suface is ABGR and Destination Surface is ABGR. We use software blending. In the Switch-Case statement for SDL_COPY_BLEND (Line 126) the alpha-channel is not calculated like in every SDL_blit_auto - function. So if the destination Surface has alpha - channel of zero the resulting surface has zero as well.
Add: ?dstA = srcA + ((255 - srcA) * dstA) / 255;? to code and everything is okay.
Marcel Bakker
Observed when resizing or moving a window in Windows 7.
Depending on how you resize/move your window
, you may receive none or a lot of SDL_WINDOWEVENT_EXPOSED events
, at the moment you release the mouse button.
Maybe add this event to an already existing list of overflow candidates ?
Yann Dirson
When attempting to force use of opengles2 renderer with:
int wanted_renderer = -1;
for (int i = 0; i < numrenderers; i++) {
SDL_RendererInfo renderer_info;
if (SDL_GetRenderDriverInfo(i, &renderer_info) != 0) {
SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "Couldn't get renderer driver info: %s\n",
SDL_GetError());
quit(2);
}
std::cerr << "Renderer " << i << " '" << renderer_info.name << "': flags=0x"
<< std::hex << renderer_info.flags << std::dec
<< ", " << renderer_info.num_texture_formats << " texture formats, max="
<< renderer_info.max_texture_width << "x"
<< renderer_info.max_texture_height << "\n";
if (!strcmp(renderer_info.name, "opengles2")) {
std::cerr << " selecting!\n";
wanted_renderer = i;
}
}
renderer = SDL_CreateRenderer(window, wanted_renderer, 0);
... on banana pi or raspberry pi I get an error like the following (the actual
context profile value varies, being used uninitialized)
ERROR: Couldn't create renderer: Unknown OpenGL context profile 900
With this patch I get the following, which should help more pointing to a real problem:
ERROR: Couldn't create renderer: Failed getting OpenGL glGetString entry point
I pushed a patch (based on master branch of unofficial git mirror):
550389c89f
I'll be opening a different bug for the underlying issue.
Evgeny Vrublevsky
Original code in the video/windows/SDL_windowsevents.c registers obsolete WNDCLASS (not WNDCLASSEX). As the result only one icon size is used as the small and normal icons. Also original code doesn't specify required size of an icon. As the result when 256x256 icon is available, the program uses it as a default icon, and it looks ugly.
We have to use WNDCLASSEX and load icons with proper sizes which we can get using GetSystemMetrics.
Better idea. We could use the first icon from resources, like the Explorer does. Patch is included. It also correctly loads large and small icons, so it will look nice everywhere.
ny00
Using the OpenGL ES 1.1 renderer, after updating a texture with SDL_UpdateTexture (or SDL_UnlockTexture), a following call to SDL_RenderFillRect draws a rectangle with the wrong color (which appears to be the same as the texture's top-left pixel).
Comparing SDL_render_gles.c:GLES_UpdateTexture to SDL_render_gl.c:GL_UpdateTexture, a missing call to glDisable appears to be the cause. After adding it back, the bug is resolved.
ny00
On Android, the keycodes KEYCODE_BUTTON_1..16 (actual values 188-203) are translated to SDL_Joystick buttons no. 20-35. These are currently ignored in SDL_gamecontroller.c.
The attached patch fixes this, by increasing k_nMaxReverseEntries from 20 to another arbitrary bound of 48.
Side-note: Maybe some log should be emitted in case of going over any such bound?
Diego
The keyboard on iPads has a dismiss button that hides the keyboard. When the keyboard was hidden using that button, instead of the return key, SDL was still reporting IsTextInputActive as true. This patch adds an extra SDL_StopTextInput when iOS reports the keyboard will hide.
Simon Hug
The SDLmain file src/main/windows/SDL_windows_main.c defines both entry points for console applications, main and wmain. This seems to confuse MSVC. It outputs a LNK4067 warning and then chooses main, which is a shame because only wmain has the unicode handling. Using SDLmain.lib provided on libsdl.org, the linker also goes for main.
I'm proposing to not define the main entry point at all. wmain should be supported well enough with MSVC.
Eric Wasylishen
The bug here is that a dead keys pressed before calling SDL_StartTextInput() carries over into future text input, so the next key pressed will have the deadkey applied to it.
This in undesirable, imho, and doesn't occur on OS X (haven't check Linux or elsewhere). It's causing a problem for Quakespasm on German keyboard layouts, where we use the ^ deadkey to toggle the console (which enables/disables text input), and ^ characters are showing up in the TEXTINPUT events.
Simon Hug
The function console_wmain in src/main/windows/SDL_windows_main.c does not null terminate the argument list it is creating. As specified by the C standard, "argv[argc] shall be a null pointer."
The SDLTest framework makes use of that null pointer and some test programs can cause an access violation because it's missing.
Simon Hug
The description of the SDL_RenderClear function in the SDL_render.h header says the following:
"This function clears the entire rendering target, ignoring the viewport."
The word "entire" implies that the clipping rectangle set with SDL_RenderSetClipRect also gets ignored. This is left somewhat ambiguous if only the viewport is mentioned. Minor thing, but let's see what the implementations actually do.
The software renderer ignores the clipping rectangle when clearing. It even has a comment on this: /* By definition the clear ignores the clip rect */
Most other render drivers (opengl, opengles, opengles2, direct3d, and psp [I assume. Can't test it.]) use the scissor test for the ClipRect and don't disable it when clearing. Clearing will only happen within the clipping rectangle for these drivers.
An exception is direct3d11 which uses a clear function that ignores the scissor test.
Simon Hug
When updating the viewport in GLES_UpdateViewport, the OpenGL ES renderer doesn't flip the projection matrix for target textures. The lines, rectangles and textures (if drawn with glDrawArrays) are upside down when drawing to target textures.
Simon Hug
The OpenGL ES 2 renderer does not check the target texture format when using SDL_RenderReadPixels and just always uses ABGR8888. This can result in swapped or wrong colors.
The attached patch adds a check and selects the target texture format, if a texture is set as the target.
Simon Hug
All OpenGL renderers always flip the rows of the pixels that come from glReadPixels. This is unnecessary for target textures since these are already top down.
Also, the rect->y value can be used directly for target textures for the same reason. I don't see any code that would handle the logical render size for target textures. Or am I missing something?
The attached patch makes the renderers only the flip rows if the data comes from the default framebuffer.
Simon Hug
The current SDL_SaveBMP_RW function that saves surfaces to a BMP uses an old bitmap header which doesn't officially support alpha channels. Applications just ignore the byte where the alpha is stored. This can easily be extended by using a newer header version and setting the alpha mask.
The attached patch has these changes:
- Extending the description of the function in the SDL_surface.h header with the supported formats.
- Refining when surfaces get stored to a 32-bit BMP. (Must have bit depth of 8 or higher and must have an alpha mask or colorkey.)
- Fixing a small bug that saves 24-bit BGR surfaces with a colorkey in a 24-bit BMP.
- Adding code that switches to the bitmap header version 4 if the surface has an alpha mask or colorkey. (I chose version 4 because Microsoft didn't lose its documentation behind a file cabinet like they did with version 3.)
- Adding a hint that can disable the use of the version 4 header. This is for people that need the legacy header or like the old behavior better. (I'm not sure about the hint name, though. May need changing if there are any rules to that.)
Simon Hug
The GL_SetBlendMode and GLES_SetBlendMode functions of the opengl and opengles renderers call the glTexEnvf to set the texture env mode to either GL_MODULATE (the default) or GL_REPLACE for the NONE blend mode. Using GL_REPLACE disables color and alpha modulation for textures.
These glTexEnv calls were put in the SetBlendMode function back in 2006 [1], but there the NONE code still used the GL_DECAL mode. The GL_REPLACE mode came in 2008 [2]. I'm a bit confused why that wasn't always GL_MODULATE and a bit surprised nobody reported that yet (unless I missed it). I guess only a few use the gles renderer and the newish shaders mask the issue.
Simon Hug
The GL_CreateTexture function doesn't have any checks for the case where the driver doesn't support the framebuffer object extension. It will call into GL_GetFBO which will call the non-existent glGenFramebuffersEXT.
Also, for some reason GL_CreateContext always sets the SDL_RENDERER_TARGETTEXTURE info flag, even if it is not supported. Changeset cc226dce7536 [1] makes this change, but doesn't explain why. It seems to me like the code would already have taken care of this [2].
The attached patch adds some checks and stops SDL from reporting render target support if there is none. The application can then properly inform the user instead of just crashing.
Simon Hug
When the SDL_Blit_Slow function compares the pixel to the color key it does so without removing the alpha component from the pixel value and the key. This is different from the optimized 32-bit blitters which create a rgb mask and apply it to both to filter the alpha out. SDL_Blit_Slow will only skip the pixels with the exact alpha value of the key instead of all pixels with the same color.
The attached test case blits a surface with a color key and prints the pixel values to the console. The third row is expected to be skipped.
Simon Hug
It seems not everyone implemented glDrawTexfOES the same. Intel and Mesa ignore the viewport entirely, whereas the Raspberry Pi implementation offsets the coordinates and does viewport clipping.
The glDrawTexfOES extension text [1] for the function says "Xs and Ys are given directly in window (viewport) coordinates." I guess this wasn't clear enough.
Alex Szpakowski
Honestly I'd probably remove that codepath from SDL_Render entirely. It's an OpenGL ES 1-specific extension that isn't likely to give huge performance gains and adds additional maintenance overhead to SDL_Render while also having bugs in some drivers (as seen here).
SFC30 controller: http://www.8bitdo.com/sfc30/
The SFC30 controller can present itself in a variety of modes and it offers up
different names in each. This patch captures data for three modes (one USB and
two Bluetooth) on three platforms (Mac OS X, Windows, Linux).
However, USB mode on Linux and Windows is missing as the button events did not
make it through to SDL's controllermap tool on Fedora 24/Linux 4.5.5 nor Steam
Big Picture mode on Windows. The two Bluetooth modes were indistinguishable on
Windows. Two modes on OS X were indistinguishable.
There exists a similar controller called the SNES30 (And some others) that are
very likely identical except for the name, but I have not verified this yet so
haven't synthesized lines for those controllers until I can.
Kai Sterker
There are already patches available from mingw64 that fix the issue
https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-SDL2
With those applied, I could compile SDL2 without problems. But of course, it would be preferable if SDL built cleanly from source.
Vitaly Novichkov
Line 124
====================================================================
const DWORD flags = thread->stacksize ? STACK_SIZE_PARAM_IS_A_RESERVATION : 0;
====================================================================
Error of compiler:
====================================================================
CC build/SDL_systhread.lo
src/thread/windows/SDL_systhread.c: In function 'SDL_SYS_CreateThread':
src/thread/windows/SDL_systhread.c:124:45: error: 'STACK_SIZE_PARAM_IS_A_RESERVA
TION' undeclared (first use in this function)
const DWORD flags = thread->stacksize ? STACK_SIZE_PARAM_IS_A_RESERVATION :
0;
^
src/thread/windows/SDL_systhread.c:124:45: note: each undeclared identifier is r
eported only once for each function it appears in
make: *** [build/SDL_systhread.lo] Error 1
====================================================================
Fixing when I adding into begin of the file:
====================================================================
#ifndef STACK_SIZE_PARAM_IS_A_RESERVATION
#define STACK_SIZE_PARAM_IS_A_RESERVATION 0x00010000
#endif
====================================================================
The Apple TV remote is currently exposed as a joystick with its touch surface treated as two axes. Key presses are also generated when its buttons and touch surface are used.
A new hint has been added to help deal with deciding whether to background the app when the remote's menu button is pressed: SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS.
Previously when the canvas was scaled up and the pointer was locked,
motion corresponding to less than one pixel was lost. Therefore,
slow mouse motion resulted in no motion. This fixes that.
Browsers don't have the functionality to fully support the generic
SDL_ShowMessageBox(), but this handles the likely most-common case.
Without this, you'd return immediately with a proper error result and no UI,
but probably no one checks that for SDL_ShowSimpleMessageBox. And if they
did: what would they do to handle this anyhow?
We'd need to lobby for an HTML spec of some sort that allows customizable
message boxes--that block!--to properly support SDL message boxes on
Emscripten, but this is probably Good Enough for now.
AudioQueues are available in Mac OS X 10.5 and later (and iOS 2.0 and later).
Their API is much more clear (and if you don't mind the threading tapdance
to get its own CFRunLoop) much easier to use in general for our purposes.
As an added benefit: they seemlessly deal with format conversion in ways
AudioUnits don't: for example, my MacBook Pro's built-in microphone won't
capture at 8000Hz and the AudioUnit version wouldn't resample to hide this
fact; the AudioQueue version, however, can handle this.
Generate the C protocol files from the protocol XML files installed by
wayland-protocols, and use them to implement support for relative pointer
motions and pointer locking.
Note that at the time, the protocol is unstable and may change in the future.
Any future breaking changes will, however, fail gracefully and result in no
regressions compared to before this patch.
Since we are loading shared objects dynamically, build our own version of the
core protocol symbols, so that we in the future can include protocol
extensions.
This will be used by Wayland compositors to match the application ID and
.desktop file to the SDL window(s).
Applications can set the SDL_VIDEO_WAYLAND_WMCLASS environemnt variable
early in the process to override using the binary name as a fallback.
Note that we also support the SDL_VIDEO_X11_WMCLASS in the Wayland
backend so that if a program correctly associated the desktop file with
the window under X11, only a newer SDL would be needed for it to work
under Wayland.
https://bugzilla.libsdl.org/show_bug.cgi?id=3376
Author: James Zipperer <james.zipperer@synapse.com>
Date: Sun Aug 21 01:19:19 2016 -0700
bugfix for controller / joystick add / remove being in the event queue at the same time
The repro steps were this:
1. run an sdl2 winrt/uwp app, on Win10, v10.0.10586.0 or higher
2. hide the cursor, via a call to SDL_ShowCursor(0)
3. make the Win10 game bar appear, by pressing the Windows + G hotkey
4. observe that the mouse cursor appears, in order to interact with the
game bar (this is expected behavior)
5. make the Win10 game bar disappear, either by pressing the Windows + G hotkey
again, or clicking somewhere in the app
EXPECTED RESULT: cursor disappears, as game bar disappears
ACTUAL RESULT: cursor didn't always disappear
Moved this code from winmm into core so both can use it.
DirectSound (at least on Win10) also returns truncated device names, even
though it's handed in as a string pointer and not a static-sized buffer. :/
The Windows 10 Anniversary Update (1607) breaks the method uses that SDL uses to
detect XInput devices. That is, on Windows 10 Anniversary Update, it is no longer
possible to query RAWINPUT for HID devices, and check for "IG_" in the device name.
Presumably, this will be fixed in the future.
This patch works around the issue by adding the Xbox One controller series to the
well-known device list.
This skips the more expensive RAWINPUT check for those devices, and causes them to
be detected as XInput devices once again.
Otherwise, if you had a massive, one-time queue buildup, the memory from that
remains allocated until you close the device. Also, if you are just using a
reasonable amount of space, this would previously cause you to reallocate it
over and over instead of keeping a little bit of memory around.
I think this was important for SDL 1.2 because some targets needed
special device memory for DMA buffers or locked memory buffers for use in
hardware interrupts or something, but since it just defines to SDL_malloc
and SDL_free now, I took it out for clarity's sake.
- It's now always called if device->hidden isn't NULL, even if OpenDevice()
failed halfway through. This lets implementation code not have to clean up
itself on every possible failure point; just return an error and SDL will
handle it for you.
- Implementations can assume this->hidden != NULL and not check for it.
- implementations don't have to set this->hidden = NULL when done, because
the caller is always about to free(this).
- Don't reset other fields that are in a block of memory about to be free()'d.
- Implementations all now free things like internal mix buffers last, after
closing devices and such, to guarantee they definitely aren't in use anymore
at the point of deallocation.
Turns out that libartsc isn't thread-safe, so if we run a capture and playback
device at the same time, it often crashes in arts's internal event loop.
We could throw mutexes around the read/write calls, but these are meant to
block, so one device could cause serious latency and stutter in the other.
Since this audio target isn't in high-demand (Ubuntu hasn't offered a libartsc
package for years), I'm just backing out the capture support. If someone needs
it, they can pull it out of the revision history.
(We probably never noticed because this is meant to block until it fully
writes a buffer, and would only trigger an issue if we had a short write
that wasn't otherwise an error condition.)
This workaround, unfortunately, requires that apps directly link to a set of
Win32-style cursor resource files (that contain a transparent cursor image).
Copies of suitable resource files are in src/core/winrt/, and should be
included directly in an app's MSVC project.
A rough explanation of this workaround/hack, and why it's needed (and
seemingly can't be done through programmatic means), is in this change's code.
This allows us to set an explicit stack size (overriding the system default
and the global hint an app might have set), and remove all the macro salsa
for dealing with _beginthreadex and such, as internal threads always set those
to NULL anyhow.
I've taken some guesses on reasonable (and tiny!) stack sizes for our
internal threads, but some of these might turn out to be too small in
practice and need an increase. Most of them are simple functions, though.
Win10's 'GamepadAdded' event seems to need to have something registered with it
in order for Xinput-based gamepad detection to work. This 'fix' simply causes
a dummy event-handler to be added for this event, in case an app wants to use
gamepads on Xbox One (most likely).
This is kind of nasty, because ALSA reports dozens of "devices" that aren't
really things you'd ever want, or things that should be listed this way, but
the default path still works as before, and it at least allows these devices
to be available to apps.
This does not handle hotplugging yet. You get a device list at init time
and that's it.
- Cache the _NET_FRAME_EXTENTS data locally, so we don't have to query
the X server for them (instead, we update our cached data when PropertyNotify
events alert us to a change).
- Use our cached extents for X11_GetWindowBordersSize(), so it's a fast call.
- Window position was meant to refer to the client area, not the window
decorations, so adjust appropriately when getting/setting the position.
We now only raise the magic exception that names the thread when
IsDebuggerPresent() returns true. In such a case, Visual Studio will
catch the exception, set the thread name, and let the debugged process
continue normally. If the debugger isn't running, we don't raise an exception
at all.
Setting the name is a debugger trick; if the debugger isn't running, the name
won't be set if attached later in any case, so this doesn't lose functionality.
This lets this code work without assembly code, on win32 and win64, and
across various compilers.
The only "gotcha" is that if you have something attached that looks like a
debugger but doesn't respect this magic exception trick, the process will
likely crash, but that's probably a deficiency of the attached program.
Fixes Bugzilla #2089.
The returned value is currently not used by the caller. The instance id would
also not be needed on Java side and providing it just complicated the function.
Partially fixes Bugzilla #3234.
This assert triggers when run under XMonad. It's safe to pass a zero here
anyhow, as this will still work "well enough" and the original
problem--GNOME printing a warning message--is still fixed because GNOME's
window manager gives us a chance to grab a non-zero user-time value before
this code is run.
(and thanks to Cengiz for many of the previous Unreal-related
patches! They were generically credited to Epic Games, but a large
amount of that work was his contribution.)
Fixes Bugzilla #3067.
This is for corner cases where a multi-window app is activated and wants to
make a decision about where focus should go.
This patch came from Unreal Engine 4's fork of SDL, compliments of Epic Games.
Adam M.
When setting a texture alpha mod other than 255 and also specifying a flip mode in the software renderer, the rendering fails. When the texture has an alpha channel, it becomes invisible when flipped. When the texture does not have an alpha channel, it is flipped but the colors are wrong: the alpha mod makes the texture darker rather than more translucent.
0) Initialize a software renderer.
1) Load 16-bit 565 or 32-bit texture.
2) Set texture blend mode to BLEND.
3) Set texture alpha mod to 150.
4) Draw the texture flipped horizontally and/or vertically.
Adam M.
There are three problems in the code that I see.
1. SW_RenderCopyEx enables a color key on surface_scaled even if the source surface didn't have a color key.
2. SW_RenderCopyEx doesn't copy blend mode, color mod, or alpha mod from src to surface_scaled.
3. When SDL_BlitScaled(src, srcrect, surface_scaled, &tmp_rect) is called, it blends the src pixels into surface_scaled instead of overwriting them (if src has blending, etc. enabled).
I've attached a patch that 1) fixes the three problems that I mentioned, 2) adds the requested performance improvement of using the regular blit function if no rotation or flipping is needed, 3) avoids cloning the source surface if no stretching is required, and simplifies the rotation code slightly.
Adam M.
Okay, here is the problem, I think.
During the first blit, RLEAlphaSurface is called to do RLE conversion of the RGBA source into a format allowing it "to be quickly alpha-blittable onto dest". Since the destination is the screen, it has no alpha channel. RLEAlphaSurface calls copy_opaque(dst, src + runstart, len, sf, df) (where copy_opaque is copy_32), which has this code:
SDL_RLEaccel.c:984:
RGBA_FROM_8888(*src, sfmt, r, g, b, a);
PIXEL_FROM_RGBA(*d, dfmt, r, g, b, a);
On the first line, it reads the source pixel 0xFFFFFFFF. The second line drops the alpha value (because dfmt for the screen has no alpha channel) and writes 0x00FFFFFF. Later, when the RLE conversion is being undone, uncopy_32 is called, which has the following code:
SDL_RLEaccel.c:1001:
Uint32 pixel = *s++;
RGB_FROM_PIXEL(pixel, sfmt, r, g, b);
a = pixel >> 24;
PIXEL_FROM_RGBA(*dst, dfmt, r, g, b, a);
However, the the alpha channel has already been dropped by copy_opaque (= copy_32), so pixel = 0x00FFFFFF and 'a' becomes 0. Thus, all opaque pixels lose their alpha channel when being unRLE'd. (I don't know what happens to pixels with alpha from 1-254, but they should be checked too.)
So, that seems to be the problem, but I'm not sure what the solution should be. Since opaque pixels have alpha == 255, I'm thinking to create another uncopy function for opaque pixels that simply uses 255 for alpha.
However, there may be other problems here. For translucent pixels, uncopy_32 assumes the alpha channel is stored in the upper 8 bits, but copy_32 doesn't store it there. Instead, it stores it in whatever location is appropriate for the destination surface. Isn't one of their behaviors incorrect, given the other? I'm not sure which to change, however.
For translucent pixels, it seems that the blit function uses do_blend, which is the BLIT_TRANSL_888 macro, which also assumes alpha is in top 8 bits. It has the comment "we have made sure the alpha is stored in the top 8 bits...", but it seems that's not true (copy_32 doesn't make sure the alpha goes there).
Perhaps the correct fix is to make copy_32 put the alpha there, but then that seems to require that RLE conversion be limited to destination surfaces that don't use the upper 8 bits. However, looking further, it seems that has already been done: if (masksum != 0x00ffffff) return -1; /* requires unused high byte */
Sylvain
When using API 21 and running on an old device (android < 5.0 ?) some function are missing.
functions are (at least) : signal, sigemptyset, atof, stpcpy (strcat and strcpy), srand, rand.
Very few modifications on SDL to get this working :
on SDL
======
Undefine android configuration :
HAVE_SIGNAL
HAVE_SIGACTION
HAVE_ATOF
In "SDL_systrhead.c", comment out the few block of lines with "sigemptyset".
Android.mk:
remove the compilation of "test" directory because it contains a few rand/srand calls
Also, there are more discussions about this in internet :
https://groups.google.com/forum/#!topic/android-ndk/RjO9WmG9pfEhttp://stackoverflow.com/questions/25475055/android-ndk-load-library-cannot-locate-srand
Sylvain
http://developer.android.com/reference/android/view/InputDevice.html
int SOURCE_CLASS_JOYSTICK Constant Value: 16 (0x00000010)
int SOURCE_JOYSTICK Constant Value: 16777232 (0x01000010)
int SOURCE_KEYBOARD Constant Value: 257 (0x00000101)
int SOURCE_GAMEPAD Constant Value: 1025 (0x00000401)
int SOURCE_DPAD Constant Value: 513 (0x00000201)
I have an a PC keyboard that I connect to an android device.
The issue is that "arrow" keys gets lost.
More explanation:
This device gets detected twice by the java "pollInputDevices()" both as SOURCE_KEYBOARD and as a composite (0x1000311 == SOURCE_JOYSTICK | SOURCE_KEYBOARD | SOURCE_DPAD).
Because of being a SOURCE_CLASS_JOYSTICK, only the second entry is registered, and I opened it.
When I press one arrow key, the java method "onKey(...)" is called.
The Source "event.getSource()" is "SOURCE_KEYBOARD", so it enters this conditions :
if ( (event.getSource() & InputDevice.SOURCE_GAMEPAD) != 0 ||
(event.getSource() & InputDevice.SOURCE_DPAD) != 0 ) {
And then, it enters :
SDLActivity.onNativePadDown() (native code in "SDL_sysjoystick.c")
Since the "arrows" are viewed as "D-PAD", it gets translated :
int button = keycode_to_SDL(keycode);
But the android-java "event.getDeviceId()" is wrong: this is the one from the Keyboard, and not the one from the Joystick that I have opened.
So I don't get them through the Joystick interface.
And since, the keycode has been translated, it returns 0 and assume it was consumed.
So I lost the key in the function "Android_OnPadDown()"
Notice, It won't happen with other normal "letters" keys because they does not get translated by "keycode_to_SDL", so "Android_OnPadDown()" returns -1.
And then java code send the keys to "SDLActivity.onNativeKeyDown()".
Possible patch on "Android_OnPadDown" and also "Android_OnPadUp" (and maybe other functons):
85 int
186 Android_OnPadDown(int device_id, int keycode)
187 {
188 SDL_joylist_item *item;
189 int button = keycode_to_SDL(keycode);
190 if (button >= 0) {
191 item = JoystickByDeviceId(device_id);
192 if (item && item->joystick) {
193 SDL_PrivateJoystickButton(item->joystick, button , SDL_PRESSED);
194 }
+ else return -1;
195 return 0;
196 }
197
198 return -1;
199 }
It would allow the java caller function to send the key to "SDLActivity.onNativeKeyDown();"
Another solution, would be to replace:
if ( (event.getSource() & InputDevice.SOURCE_GAMEPAD) != 0 ||
(event.getSource() & InputDevice.SOURCE_DPAD) != 0 ) {
by
if ( (event.getSource() & InputDevice.SOURCE_CLASS_JOYSTICK) != 0)
Because only "SOURCE_CLASS_JOYSTICK" devices are registered/opened.
Martin Gerhardy
Not sure - but I think there might be a logic flaw in SDL_SetWindowGrab.
The problem here is that this modifies the window flags and e.g. sets
SDL_WINDOW_INPUT_GRABBED - but the _this->grabbed_window pointer is not
yet set.
Then in SDL_UpdateWindowGrab the _this->grabbed_window pointer is only
set if the function pointer _this->SetWindowGrab is not NULL. But if
this is NULL, the _this->grabbed_window pointer is never set, but every
future call to any of the grab functions include an assert for:
SDL_assert(!_this->grabbed_window || ((_this->grabbed_window->flags &
SDL_WINDOW_INPUT_GRABBED) != 0));
That means the first call works, the second always fails and triggers
the assert.
Magnus Bjerke Vik
This causes issues when for instance using the joystick API to make an Android phone rotate an object by rotating the phone. When the absolute value of an axis reported by android is larger than earth gravity, SDL will overflow the Sint16 value used for joystick axes, causing sporadic movements when close to the gravity. Just holding the phone so that e.g. Y points directly upwards will make it unstable, and even more if you just tap the phone gently from below (increasing the acceleration).
More detailed: SDLActivity gets the accelerometer values in onSensorChanged and divides each axis by earth gravity. SDL_SYS_JoystickUpdate takes each of the axis values, multiplies them by 32767.0 (largest Sint16), and the casts them to Sint16. From this you can see that any value from Android that exceeds earth gravity will overflow the joystick axis.
A fix is to clamp the values so that they won't overflow the Sint16.
Simon Deschenes
My build system still shows warning as errors.
The first warning says that the member named instances can never be false (or NULL) as it is a static array, and we should check for instances[index] which we do anyway.
Ozkan Sezer
pthread/SDL_syssem.c requires _GNU_SOURCE predefined (like SDL_sysmutex.c),
otherwise sem_timedwait() prototype might not be available to it. Problem
seen with glibc-2.3.4.
If the allocation of an SDL_Touch failed, the number of touch devices was still
increased. Later access of the SDL_Touch would then have dereferenced the NULL.
Joe Thompson
This is a regression. The changes to fix#2460 cause the EnumJoysticksCallback() function to return without adding devices (Line 345 in SDL-0a2b6bc7005f\src\joystick\windows\SDL_dinputjoystick.c).
Looking at dinput.h on my system, at least DI8DEVTYPE_DRIVING and DI8DEVTYPE_FLIGHT need to be added to the test.
It might be better to check if (devtype == DI8DEVTYPE_SUPPLEMENTAL) rather than checking if it is NOT EQUAL to a long list of types. Or check if the device is already in the list.
This happens when the pointer is grabbed, but it's not clear if this is a
bug in x.org or my misunderstanding of the XGrabPointer() documentation.
At any rate, we'll want to revisit this later for a better solution.
Fixes Bugzilla #2963.
Make note to send it, and send next time we SDL_PumpEvents().
Otherwise, we might be trying to use malloc() to push a new event on the
queue while a signal is interrupting malloc() elsewhere, usually causing a
crash.
Fixes Bugzilla #2870.
This was the only thing that made SDL_config.h generate differently between
32 and 64-bit versions of Linux, so instead we force a function cast in our
X11 code to match our dynamic loader version, which removes the compile error
on some machines that prompted this test in the first place.
Xlib never wrote to this data, so if you're on an older Xlib where this param
wasn't const, your data should still be intact when we force the caller to
think it was actually const after all.
Fixes Bugzilla #1893.
Fixes Bugzilla #2895.
His notes:
The following trivial changes make SDL2 tree (mostly) compatible with Visual
Studio 2005:
* SDL_stdlib.c: Similar to VS2010 and newer, VS2005 also generates memcpy(),
(it also generates memset(), see below), so propagate the #if condition to
cover VS2005.
* SDL_pixels.c (SDL_CalculateGammaRamp): VS2005 generates a memset() call for
gamma==0 case, so replace the if loop with SDL_memset().
* SDL_windowsvideo.h: Include msctf.h only with VS2008 and newer, otherwise
include SDL_msctf.h
* SDL_windowskeyboard.c: Adjust the #ifdefs so that SDL_msctf.h inclusion is
always recognized correctly.
Fixes Google Chrome, etc, freezing up when SDL owns the clipboard selection
and actually sends thems the correct text for pasting. Confirmed working with
Unicode strings in UTF-8 format.
There were a few tweaks in this patch, but the specific fix is that
event.xselection.target in the SelectionNotify event we send back in reply
must be set to the same atom as the request ("TARGETS" in this case), and
we failed to do that in this special case. Things that don't ask for a target,
like the Gnome Terminal app, worked fine because they don't ask for TARGETS
and just go right to asking for a UTF8_STRING, and Mozilla apparently just
was more liberal in what they accepted in reply.
Chrome would reject our wrong reply and freeze up waiting for a valid one.
Someone should fix that in Chrome, too. :)
Fixes Bugzilla #2926.
Roberto
I have debugged the code checking the function calls when Direct3D is the renderer, remember that with software and OpenGL renderers, this issue is not happening.
- Create the texture:
SDL_Texture *pTex = SDL_CreateTexture(pRenderer, iFormat, SDL_TEXTUREACCESS_TARGET, pSurf->w, pSurf->h);
- Update the texture:
SDL_UpdateTexture(pTex, NULL, pSurf->pixels, pSurf->pitch);
SDL_render.c, SDL_UpdateTexture(): return renderer->UpdateTexture(renderer, texture, rect, pixels, pitch);
SDL_render_d3d.c, D3D_UpdateTexture(): if (D3D_UpdateTextureRep(data->device, &texturedata->texture, texture->format, rect->x, rect->y, rect->w, rect->h, pixels, pitch) < 0) {
SDL_render_d3d.c, D3D_UpdateTextureRep(): if (D3D_CreateStagingTexture(device, texture) < 0) {
SDL_render_d3d.c, D3D_CreateStagingTexture(): result = IDirect3DDevice9_CreateTexture(..., D3DPOOL_SYSTEMMEM, ...) --> FAIL! with INVALIDCALL code
After checking a bit the Microsoft documentation, I found this:
D3DUSAGE_RENDERTARGET can only be used with D3DPOOL_DEFAULT. (https://msdn.microsoft.com/en-us/library/windows/desktop/bb172625%28v=vs.85%29.aspx)
The call that fails, is using D3DUSAGE_RENDERTARGET with D3DPOOL_SYSTEMMEM which is unsupported, hence the INVALIDCALL return code.
The window needs to catch ClientMessage events for one specific window, but
XNextEvent() catches everything, and XWindowEvent doesn't catch ClientMessage,
so we need predicate procedure and XIfEvent() here.
Fixes Bugzilla #2980.
These events accidentally slipping in sometimes appears to be a bug (or
maybe new behavior) in 10.10, as previous versions of Mac OS X don't appear
to ever trigger this.
Thanks to Paulo Marques for pointing out the fix on the SDL mailing list!
Fixes Bugzilla #2842 (again).
Zack Middleton
The change to the keymap to use SDL_SCANCODE_TO_KEYCODE in SDL_x11keyboard.c causes all SDL scancodes without a Usc4 character to be XOR'd with SDLK_SCANCODE_MASK, but not all key code are suppose to be (as seen in include/SDL_keycodes.h). SDLK_BACKSPACE is not 0x4000002A.
I think the full list of keys affected are return, escape, backspace, tab, and delete.
Volumetric
The "Unknown touch device" message appears because the initial touch device setup loop uses SDL_GetTouch() as a guard for calling SDL_AddTouch(). SDL_GetTouch() will always report "Unknown touch device" since the device hasn't been added yet. The SDL_GetTouch() call is unnecessary since SDL_AddTouch() calls SDL_GetTouchIndex() to verify that the device hasn't been added yet, and SDL_GetTouchIndex() has the benefit of not reporting an error for a device it can't find.
Jacob Lee
If a user has a non-standard keyboard mapping -- say, their caps lock key has been mapped to Ctrl -- then SDL_GetModState() is no longer accurate: it only considers the unmapped keys. This is a regression from SDL 1.2.
I think there are two parts to this bug: first, GetModState should use keycodes, rather than scancodes, which is easy enough.
Unfortunately, on my system, SDL considers Caps Lock, even when mapped as Control, to be both SDL_SCANCODE_CAPSLOCK and SDLK_CAPSLOCK. The output from checkkeys for it is:
INFO: Key pressed : scancode 57 = CapsLock, keycode 0x40000039 = CapsLock modifiers: CAPS
Whereas the output for xev is:
KeyPress event, serial 41, synthetic NO, window 0x4a00001,
root 0x9a, subw 0x0, time 40218333, (144,177), root:(1458,222),
state 0x10, keycode 66 (keysym 0xffe3, Control_L), same_screen YES,
XKeysymToKeycode returns keycode: 37
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
I think the problem is that X11_UpdateKeymap in SDL_x11keyboard.c only builds a mapping for keycodes associated with a Unicode character (anything where X11_KeyCodeToUcs returns a value). In the case of caps lock, SDL scancode 57 becomes x11 keycode 66, which becomes x11 keysym 65507(Control_L), which does not have a unicode value.
To fix this, I suspect that SDL needs a mapping of the rest of the x11 keysyms to their corresponding SDL key codes.
hiduei
Overview:
Initializing the Video Subsystem causes many errors though everything works as it should.
Steps to Reproduce:
1) Set Loglevel to SDL_LOG_PRIORITY_ERROR
2) Initialize the Video Subsystem (SDL_Init(SDL_INIT_VIDEO))
Actual Results:
Many errors (see attachment) are printed on stderr, then the application continues as expected.
Expected Results:
The errors should have been warnings at most.
Andreas Ragnerstam
I have two windows where one has a renderer where the logical size has been changed with SDL_RenderSetLogicalSize. When I get SDL_MOUSEMOTION events belonging to the non-scaled window these will have been scaled with the factor of the scaled window, which is not expected.
Adding some printf debugging to SDL_RendererEventWatch of SDL_render.c, where (event->type == SDL_MOUSEMOTION), I found that for every mouse motion SDL_RendererEventWatch is called twice and the event->motion.x and event.motion.y are set twice for the event, once for each renderer where only the last one set will be saved to the event struct. This will work fine if both renderers have the same scale, but otherwise the motion coordinates will be scaled for the renderer belonging to another window than the mouse was moved in.
I guess one solution would be to check that window == renderer->window for SDL_MOUSEMOTION events, similar to what is done for when SDL_WINDOWEVENT events.
I get the same error on both X11 and Windows.
The same problem also exists for SDL_MOUSEBUTTONDOWN and SDL_MOUSEBUTTONUP events.
Apparently you might get strange paths from GetModuleFileName(), such as
short path names or UNC filenames, so this avoids that problem. Since you have
to tapdance with linking different libraries and defining macros depending on
what Windows you plan to target, we dynamically load the API we need, which
works on all versions of Windows (on Win7, it'll load a compatibility wrapper
for the newer API location).
What a mess.
This also now does the right thing if there isn't enough space to store the
path, looping with a larger allocated buffer each try.
Fixes Bugzilla #2435.
Jason Wyatt
Currently the keymapnotify event handling is commented out as FIXME in SDL_x11events.c (It looks like this may have functioned SDL1.2).
Not handling this event means that if a window manager shortcut such as ALT+SPACE is used, SDL will send an ALT key down signal, but not an up signal. Also querying SDL about the key state, it believes the ALT key remains pressed.
X passes the events keypress (alt), ?focusout?, ?focusin?, keymapnotify.
This lets windows know when they are dropping a mouse event because their
hit test reported something other than SDL_HITTEST_NORMAL. It lets them know
exactly where in the event queue this happened.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This is currently implemented for X11, Cocoa, Windows, and DirectFB.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
This allows an app to know when a set of drops are coming in a grouping of
some sort (for example, a user selected multiple files and dropped them all
on the window with a single drag), and when that set is complete.
This also adds a window ID to the drop events, so the app can determine to
which window a given drop was delivered. For application-level drops (for
example, you launched an app by dropping a file on its icon), the window ID
will be zero.
Specifically: always on top, skip taskbar, tooltip, utility, and popup menu.
This is currently only implemented for X11.
This patch is based on work in Unreal Engine 4's fork of SDL,
compliments of Epic Games.
Notably: it sets the error string to inform you that your custom SDL is built
without xrandr support, which apparently has been a support issue for
Unreal Engine 4 developers.
This is often useful for SDL apps that aren't meant to be games: the
integrated GPU starts up faster, uses less power, and is often more than
fast enough.
Note that even with this change, the app will still default to the more
powerful, discrete GPU if one is available; an app that prefers the integrated
GPU will still need the NSSupportsAutomaticGraphicsSwitching key properly
set in its Info.plist and Mac OS X 10.7 or later.
https://developer.apple.com/library/mac/qa/qa1734/_index.html
Martin Gerhardy
According to https://msdn.microsoft.com/de-de/library/2kzt1wy3%28v=vs.120%29.aspx when one is using /MT for msvc compilations the libcmt.lib is already linked to the binary. This lib includes the symbol that is now guarded (see attached patch) by the #ifndef _MT.
I don't know if any joysticks report those usages for any buttons in practice, but other prominent Mac gaming software exposes them, so we might as well too.
xaudio2 is not linked against sdl but the sdk already handles dynamically loading (XAudio2Create is inlined and just loads a com object). Updated SDL_xaudio2.c
DXGI fails to report any displays in at least one of the
"Windows App Certification Kit 10.0"'s tests for Store Apps. This was
causing SDL's video initialization code to fail, when the suspect test
("Direct3D Feature Test") was run, as DXGI was unable to report a
display-output at adapter-index 0, output-index 0.
The workaround that is applied here attempts to detect this case, then
use a hopefully-reasonable alternative means to calculate at least one
display output.
"UWP" appears to be Microsoft's new name for WinRT/Windows-Store APIs.
This set of changes updates SDL's WinRT backends to support the Win10 flavor
of WinRT. It has been tested on Win10 on a desktop. In theory, it should
also support Win10 on other devices (phone, Xbox One, etc.), however further
patches may be necessary.
This adds:
- a set of MSVC 2015 project files, for use in creating UWP apps
- modifications to various pieces of SDL, in order to compile via MSVC 2015 +
the Win10 API set
- enables SDL_Window resizing and programmatic-fullscreen toggling, when using
the WinRT backend
- WinRT README updates
WinRT 8.0 (Phone and non-Phone) didn't offer an API to set an already-created
thread's priority. WinRT 8.1 offered this API, along with several other
Win32 thread functions that were previously unavailable (in WinRT).
This change makes WinRT 8.1+ platforms use SDL's Win32 backend.
This change-set fixes a lot of windowing related bugs, especially with
regards to Windows 8.x apps running on Windows 10 (which was the driver for
this work). The primary fixes include:
* listed display modes were wrong, especially when launching apps into a
non-fullscreen space
* reported window flags were often wrong, especially on Windows 10
* fullscreen/windowed mode switches weren't failing (they are not
programmatically possible in Win 8.x apps).
This change has also been tested as buildable + runnable on Win32 + MSVC 2015,
2013, 2012, and 2010. It may fix similar build errors (in XInput code) that
are appearing in MingW builds (on buildbot).
They were not needed internally since the switch to the common EGL backend.
Thanks to the SDL mailing list for pointing out that the functions seem unused.
The Y coordinate is flipped in Cocoa, so if you change the height, the window
will move and maybe clip against the screen edge if you don't adjust its Y
coordinate to match.
Possibly fixes Bugzilla #3066.
Unity's window manager is (legitimately, since it moves the client window's
position) sending one, and SDL was incorrectly trying to mask it out. Other
window managers (KWin, apparently) don't move the window and would hang here
indefinitely.
Fixes Bugzilla #3052.
Martin Gerhardy
Just a minor thing, but a huge outcome. All the other jni related functions already have those flags, but the nativeInit function lacks them - so it might be stripped away.
In extremely rare cases, probably due to misconfigured drivers, one might
see this happen, and rather than terminate the process, we try to recover
by reporting an error to the app.
Fixes Bugzilla #3068.
Note that extra steps must be taken when using glReadPixels to read the contents of the main OpenGL ES framebuffer on iOS, if multisampling is used. See the OpenGL ES section of README-ios.md for details.
There are platforms it isn't implemented on (and currently can't be
implemented on!), and there's currently no way for an app to know this.
This shouldn't break ABI on apps that moved to a revision between 2.0.3 and
2.0.4.
This relies on a successful SDL_Init(SDL_INIT_VIDEO) to work, since it's
silly to reproduce all the Xinerama/XRandR code in the message box parts. If
X11 is available but SDL hasn't been initialized, the message box will center
in the primary screen, which will be positioned weirdly on multi-head setups,
but this should fix the most significant common case.
Author: Benoit Pierre <benoit.pierre@gmail.com>
Date: Fri Jul 3 02:17:10 2015 +0200
fix 14dd48ae5bc43b61b2a0dd0b3177d22edec707ef regression
The window manager detection code in X11_HasWindowManager does not work
with Awesome (http://awesome.naquadah.org/). Remove it, and reuse the
result of the more correct checks in X11_CheckWindowManager.
Elise Maurer
When inputting text, dead-keys are currently not handled correctly on Windows with the latest SDL2 tip as well as the 2.0.3 release.
Using a French AZERTY keyboard, when I type the `^` key followed by `e` key to compose the `` character, I erroneously get two SDL_TEXTINPUT events, one with the `^` character and one with the `e` character.
I've looked at the history for SDL_windowsevents.c and there's been some back-and-forth with several methods for handling text input:
* r8142 removed any handling of WM_CHAR because keyboard input was being handled through WM_KEYDOWN along with ToUnicode since r7645.
* But using ToUnicode actually breaks dead-keys (googling for "ToUnicode dead keys" reports many horror stories of people trying to work around that and failing).
* It seems like r7645 introduced a double-fix: it fixed WM_CHAR to properly handle Unicode, and also (unnecessarily?) added text input handling to WM_KEYDOWN. Later, r8142 removed the WM_CHAR stuff instead of the WM_KEYDOWN stuff.
The attached patch restores handling of text input through WM_CHAR and removes it from WM_KEYDOWN. I've tested it with French, English and Russian layouts and it seems to do its job. Obviously, with such matters, it's still a risky change.
Sometimes, on removal SDL_EVDEV_udev_callback() gets called with zero udev_class. This in turn seems to be caused the SDL_udev.c:guess_device_class() failing to find the attributes of the parent device.
Apparently this is normal, attributes are not guaranteed to be in place during removal, depending on timing. This lack of attributes causes guess_device_class() to return zero.
This fix mimics the code in linux/SDL_sysjoystick.c:joystick_udev_callback() which effectively has the same fix already in place.
- disable compiling in XAudio2 support. We both need the DX SDK to make this code plus we need to work out the runtime dependency problem this code bring in on windows (needing the DX runtime installed).
CR: SamL
- do the scancode to keyboard code lookup for the grave key, so that we can show users the correct keyface for the key, rather than forcing it to "`". Note that if a game is using SDLK_* for its KB mapping then after this change on some keyboards the top left key will no longer be mapped correctly with the old data.
CR: SamL
Adam M.
It loses the title and icon when window recreation fails. For instance, this may happen when trying to create an OpenGL ES window on a system that doesn't support it. But at that point, the title and icon have already been lost.
The internal function SDL_EGL_LoadLibrary() did not delete and remove a mostly
uninitialized data structure if loading the library first failed. A later try to
use EGL then skipped initialization and assumed it was previously successful
because the data structure now already existed. This led to at least one crash
in the internal function SDL_EGL_ChooseConfig() because a NULL pointer was
dereferenced to make a call to eglBindAPI().
If SDL_SaveBMP_RW() was called with NULL passed as SDL_RWops argument, different
values were returned depending on SDL_GetError(). If no error was set before the
call (or SDL_ClearError() was called) then 0 was returned. This is wrong because
nothing was saved. If an error was set before the call then -1 was returned.
This was fixed by directly returning -1 for NULL input instead of deciding based
on SDL_GetError(). No new error is set because this would otherwise override a
maybe more useful error set in SDL_RWFromFile() which is used by SDL_SaveBMP().
This is a Win32-specific fix for bug 2726. A WinRT fix for this bug was applied
separately, via https://hg.libsdl.org/SDL/rev/91f56dcad879
This fix applies SDL_TOUCH_MOUSEID to 'mouse' events coming from touch devices,
but only when relative-mouse-mode is turned OFF. This bug is still present
when relative-mouse-mode is ON, however Microsoft does not provide documentation
on whether or not those input events (which come from WM_INPUT) can be
identified as touch-specific or not. Unofficially, that data might be available
(via GetMessageExtraInfo()), however this patch only uses MS-documented APIs.
Zack Middleton
Using X11 (on Debian Wheezy), SDL_GetModState() & KMOD_NUM and KMOD_CAPS are not set to system state (numlock/capslock LEDs). Pressing numlock or capslock toggles the mod state, though if num/caps lock is enabled before starting the program it's still reversed from system state. This makes getting KMOD_NUM and KMOD_CAPS in programs unreliable. This can be seen using the checkkeys test program.
The function that appears to have handle this in SDL 1.2 is X11_SetKeyboardState. The function call is commented out with "FIXME:" in SDL 2.
Using Windows backend through WINE; on first key press if numlock and/or capslock is enabled on system, numlock/capslock SDL_SendKeyboardKey is run and toggles KMOD_NUM/KMOD_CAPS to the correct state. On X11 this does not happen.
The attached patch makes X11 backend set keyboard state on window focus if no window was previously focused. It sets all keys to system up/down state and toggles KMOD_NUM/KMOD_CAPS via SDL_SendKeyboardKey to match system if needed. The patch is based on SDL 1.2's X11_SetKeyboardState.
Coriiander
Upon creating a window, a window property is added to it through the Win32-function "SetProp". This is done in the SDL-function "SetupWindowData" in file "src\video\windows\SDL_windowswindow.c".
Whenever you call "SetProp" to add a property to a Win32-window, you should also call the Win32-function "RemoveProp" to remove it before destroying that Win32-window.
While you might think that it's ok and that Windows will clean up nicely itself, it is not ok. It is against all Win32-API guidelines and is mostlikely a leak. Especially on external windows (CreateWindowFrom) you want to have things done right, not messy and leaky, affecting some other module. Even if SDL gets shutdown entirely that external window will now forever still have the "SDL_WindowData" prop attached to it.
The backing scale factor can change when the window moves between retina and non-retina displays.
The only other way to detect such a change is to compare the output of SDL_GL_GetDrawableSize or SDL_GetRendererOutputSize every frame, which is less than desirable, especially since the necessary app logic is likely already being executed when a window resize event is received.
This lets SDL-based apps respond to "Open With" commands properly, as they
can now obtain the requested path via a standard SDL dropfile event.
This is only checked on startup, so apps don't get drop events at any other
time, even if Android supports that, but this is still a definite
improvement.
Fixes Bugzilla #2762.
This apparently has fallout: the PS4 (and maybe PS3?) controllers apparently
report some bogus axes, but it won't change the axes we currently expect, and
thus the game controller config string is still stable.
Fixes Bugzilla #2719.
Since all device detection/removal happens on the main thread now, post events inline with when the status changes occur.
Also fixed rare cases when joystick API functions could return data about removed joysticks when called with a device index.
id.zeta
The optimization from Bug 11 added a code branch on cases where the source RGB masks match the destination RGB masks and a optimized blit function Blit4to4MaskAlpha that always overrides the source alpha info would be chosen. Unfortunately, the branch also errorneously took over the RGBA<->RGBA blitting cases where the source alpha info should be copied, while they would instead get overriden in Blit4to4MaskAlpha.
The attached patch fixes that by handling the RGBA<->RGBA cases correctly in that branch with the original BlitNtoNCopyAlpha as well as uses an optimized Blit4to4CopyAlpha along the same vein.
The expected use case is for games that are designed with multiple aspect ratios already in mind and leave optional margins on the edges of the game which won't hurt if they are cut off.
An example use case is a game is designed for wide-screen/16:9, but then wants to deploy on an iPad which is 4:3. Normally, SDL will letterbox, which will shrink things and result in wasted space. But the designer already thought about 4:3 and designed the edges of the game so they could be cut off without any functional loss. So rather than wasting space with letterboxing, "overscan" mode will zoom the rendering to fill up the entire screen. Parts on the edges will be drawn offscreen, but since the game was already designed with this in mind, it is fine. The end result is the iPad (4:3) experience is much better since it feels like a game designed for that screen aspect ratio.
This patch introduces a new SDL_hint: SDL_HINT_RENDER_LOGICAL_SIZE_MODE.
Valid values are "letterbox" or "0" for letterboxing and "overscan" or "1" for overscan.
The default mode is letterbox to preserve existing behavior.
// Example usage:
SDL_SetHint(SDL_HINT_RENDER_LOGICAL_SIZE_MODE, "overscan");
SDL_RenderSetLogicalSize(renderer, SCREEN_WIDTH, SCREEN_HEIGHT);
Elias Vanderstuyft
Remove the dependency of the calculation of Linux "phase" on "period",
currently the "phase" parameter is interpreted as a time shift, instead of a phase shift.
The Linux input documentation is not clear about the exact units of the "phase" parameter (see http://lxr.free-electrons.com/source/include/uapi/linux/input.h?v=3.17#L1075 ),
but we're about to standardize the 'phase shift' interpretation into the Linux input documentation,
since this will ease the job of a driver to recalculate the effect's state when the user dynamically updates the "period" parameter.
Elias Vanderstuyft
It's not obvious from the general "haptic direction" description what the SDL direction actually means in terms of force magnitude sign,
currently its meaning is only reflected by the example.
This change does a few things, all with regards to the WinRT implementation of
SDL_GetPrefPath():
1. it fixes a bug whereby SDL_GetPrefPath() did not create the directory it
returned. On other SDL platforms, SDL_GetPrefPath() will create separate
directories for its 'org' and 'app' folders. Without this, attempts to create
files in the pref-path would fail, unless those directories were first created
by the app, or by some other library the app used. This change makes sure
that these directories get created, before SDL_GetPrefPath() returns to its
caller(s).
2. it defaults to having SDL_GetPrefPath() return a WinRT 'Local' folder
on all platforms. Previously, for Windows Store apps, it would have used a
different, 'Roaming' folder. Files in Roaming folders can be automatically,
and synchronized across multiple devices by Windows. This synchronization can
happen while the app runs, with new files being copied into a running app's
pref-path. Unless an app is specifically designed to handle this scenario,
there is a chance that save-data could be overwritten in unwanted or
unexpected ways.
The default is now to use a Local folder, which does not get synchronized, and
which is arguably a bit safer to use. Apps that wish to use Roaming folders
can do so by setting SDL_HINT_WINRT_PREF_PATH_ROOT to "roaming", however it
is recommended that one first read Microsoft's documentation for Roaming
files, a link to which is provided in README-winrt.md.
To preserve older pref-path selection behavior (found in SDL 2.0.3, as well as
many pre-2.0.4 versions of SDL from hg.libsdl.org), which uses a Roaming path
in Windows Store apps, and a Local path in Windows Phone, set
SDL_HINT_WINRT_PREF_PATH_ROOT to "old".
Please note that Roaming paths are not supported on Windows Phone 8.0, due to
limitations in the OS itself. Attempts to use this will fail.
(Windows Phone 8.1 does not have this limitation, however.)
3. It makes SDL_GetPrefPath(), when on Windows Phone 8.0, and when
SDL_HINT_WINRT_PREF_PATH_ROOT is set to "roaming", return NULL, rather than
silently defaulting to a Local path (then switching to a Roaming path if and
when the user upgraded to Windows Phone 8.1).
Jonas Kulla
src/main/windows/SDL_windows_main.c:137:
cmdline = SDL_iconv_string("UTF-8", "UCS-2-INTERNAL", (char *)(text), (SDL_wcslen(text)+1)*sizeof(WCHAR));
I'm trying to compile an SDL2 application for windows using the mingw-w64 32bit toolchain provided by my distro (Fedora 19). However, even the simplest test program that does nothing at all fails to startup with a "Fatal error - out of memory" message because the mingw iconv library provided by my distro does not support the "UCS-2-INTERNAL" encoding and the conversion returns null.
From my little bit of research, it turns out that even though this encoding is supported by the external GNU libiconv library, some glibc versions (?) don't support it with their internal iconv routines, and will instead provide the native endian encoding when "UCS-2" is specified.
Nonetheless, I wonder why the native endianness is considered in the first place when Windows doesn't even run on any big endian archs (to my knowledge). And true enough, 'WIN_StringToUTF8' from core/windows/SDL_windows.h is used everywhere else in the windows backend, which is just a macro to iconv with "UTF-16LE" as source. Therefore it would IMO make sense to use this macro here as well, which would solve my problem (patch attached).
Nitz
I added xdnd_version check to XdndPosition case also
under DEBUG_XEVENTS macro.
by this we can get the action requested by user.
I analysed further and found out that removing xdnd_version check at XdndDrop case is a bad idea because
in XConvertSelection API timestamp should be passed if(xdnd_version >= 1)
otherwise CurrentTime should be passed
So xdnd_version check is important at XdndDrop case
I made xdnd_version as a static so that it can store the version in other cases also.
iOS 8 introduces LaunchScreen NIBs which use autolayout to handle all devices and orientations with a single NIB instead of multiple launch images. This is also the only way to get the App Store badge "Optimized for iPhone 6 and iPhone 6 Plus". So if the application is running on iOS 8 or greater AND has specified a LaunchScreen in their Info.plist, this patch will use the NIB as the launch screen. Otherwise, the code falls back to the legacy code path.
Note: Upon audit of the legacy path, it appears that it does not properly handle the UILaunchImages Info.plist convention. I've added comments inline to the code about this. However, in about a year from now, nobody is going to care about this path since everybody should be using LaunchScreen NIBs.
SDL_HINT_WINRT_PREF_PATH_ROOT allows WinRT apps to alter the path that
SDL_GetPrefPath() returns. Setting it to "local" uses the app's
OS-defined Local folder, setting it to "roaming" uses the app's OS-defined
Roaming folder.
Roaming folder support is not available in Windows Phone 8.0. Attempts to
make SDL_GetPrefPath() return a Roaming folder on this OS will be ignored.
Various bits of documentation on this were added to SDL_hints.h, and to
README-winrt.md
Further support regarding IME and on-screen keyboards is pending, some of
which might not be 100% compatible with other platforms, given WinRT platform
restrictions. An MSDN article at http://msdn.microsoft.com/en-us/library/windows/apps/hh465404.aspx
indicates that on-screen keyboard display requires that the user first tap on
a Windows/XAML text control.
This change adds basic SDL_TEXTINPUT support, with input coming from hardware
keyboards, at a minimum, and without the need for XAML integration (which is
still pending integration into SDL, by and large).
This scenario can occur, for example, when the 4-finger touch sequence is used to switch spaces. the SDL window does not receive the touch up events and ends up thinking there are far more fingers on the pad than there are.
So the solution here is everytime a new "touch" appears we can through and check if there are any existing known touches by the OS and if there are none, abut SDL things there are, we simply go through and cancel the SDL touches.
Side affects.
- the "touch up" won't occur until the users sends a new touch (could be well after the actual release really did occur)
Windows Phone 8.0 either did not define, or provide access to, a 'RoamingFolder'
or 'TemporaryFolder' for apps to use. Windows 8.0 and 8.1 do, as does
Windows Phone 8.1. This change allows SDL-based Windows Phone 8.1 apps to
access these folders, via either the SDL_WinRTGetFSPathUNICODE() or
SDL_WinRTGetFSPathUTF8() functions.
SDL_GetPrefPath(), which on WinRT, is based on SDL_WinRTGetFSPathUTF8(), will
continue to return the app's 'local' folder, despite Windows 8.x
counterpart apps using the 'roaming' folder, in order to preserve compatibility
when 8.0-based Phone apps upgrade to 8.1-based Phone apps.
This patch makes sure that any SDL_MOUSEBUTTONDOWN, SDL_MOUSEBUTTONUP, and
SDL_MOUSEMOTION events, as triggered by a touch event in a WinRT app, set the
event's 'which' field to SDL_TOUCH_MOUSEID. Previously, this was getting set
to the same value as events from a real mouse, '0'.
Thanks to Diego for providing information on this bug, and to Tamas Hamor for
sending over a patch!
SDL2 reports the following message when we type the "/" on br-abnt2 keyboards:
The key you just pressed is not recognized by SDL. \
To help get this fixed, please report this to the SDL mailing list \
<sdl@libsdl.org> X11 KeyCode 97 (89), X11 KeySym 0x2F (slash).
That's because the corresponding entry in the scancodes table is
marked with value SDL_SCANCODE_UNKNOWN.
This commit fixes that adding the value SDL_SCANCODE_SLASH for this entry.
- Removed USE_GETTICKCOUNT code; it's never used now.
- Reduced the number of preprocessor checks for WinRT.
- Renamed timeSetPeriod() so it doesn't look like a Win32 API call.
An existing hint lets apps that don't need the timer resolution changed avoid
this, to save battery, etc, but this fixes several problems in timing, audio
callbacks not firing fast enough, etc.
Fixes Bugzilla #2944.
Sam Lantinga
Ryan C. Gordon
David Ludwig
Philipp Wiesemann
Alex Szpakowski
Thomas Perl
Alex Baines
Csongor Szabo
Steffen Pankratz
Ethan Lee
Eric Wing
Bill Lash
Magnus Bjerke Vik
Bastien Nocera
Jonathan Dowland
Brandon Schaefer
Charlie Birks
Alon Zakai
Boris Gjenero
Jukka Jyl?nki
TelpeNight
Jonas ?dahl
Mikkel Krautz
bschaefer
Colby Klein
Jason Wyatt
Edward Rudd
andrewb
Alfred Reynolds
Victor Luchits
Dimitris Zenios
Andreas Schiffler
J?rgen P. Tjern?
Wander Lairson Costa