Userptr Test will fail on PAGE_SIZE bigger than BUFFER_SIZE(8 * 1024)
Signed-off-by: xinxu <xinxu@loongson.cn>
(cherry picked from commit fb7dfdc5fb58795365b70117c3eb625f2edb8f06)
For the scenario where user may require to modeset with a mode
supporting a fractional value for vertical refresh-rate,
appropriate mode can be selected by searching for mode
having matching fractional vertical refresh rate using
below equation.
vrefresh = (1000 * pixel clock) / (htotal * vtotal) Hz.
We do this way since driver doesn't return float value of vrefresh
as it use int for vrefresh in struct drm_mode_info, but we can derive
the actual value using pixel clock, horizontal total size and
vertical total size values.
So for e.g. if user want to select mode having 59.94 Hz as refresh rate
then with this patch it be can done as shown in below command,
given there is an appropriate mode is available :
modetest -M xlnx -s 39:1920x1080-59.94@BG24 -v
NOTE: Above command was tested on xilinx DRM driver with DP
monitor which was supporting mode having 59.94 Hz refresh rate.
V2: Update commit message
V3: Update with below changes as per review comments :
1) Use epsilon for vrefresh comparison
2) Use implicit type-casting wherever possible
V4: Keep patch version history on main commit message
Signed-off-by: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
When running ras inject test, it's needed to be aligned
with kernel's ras enablement.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both UMC and GFX ras single_correctable
inject tests are added.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Except CUnit library, no additional external
library should be needed when compiling amdgpu_test.
This will keep this binary self containing.
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ras inject test framework is invalid with original codes,
so refine it to make it work on top of kernel ras inject
feature enablement.
Signed-off-by: Dennis Li <dennis.li@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for better clarification
v2: accordingly change dispatch_test caller in gpu_reset test
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASIC hang randomly.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. perform gpu reset
2. perform dispatch test to verify gpu reset to a good state
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
1. skip test if there's no desired ring
2. clear shader buffer
3. update command buffer for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Make it actually clear the LUT.
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of hacking the binary every time, we can now specify directly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This includes logic to configure the LUT accordingly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
As new features are added and others are declared to be legacy, it's
nice to be able to implement fallbacks. As such, create a
property-setting variant that does not generate errors which can very
well be entirely expected.
Will be used for gamma control in a future change.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This change adds support for all current patterns.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The idea is to have a horizontal pattern split into two with the top and
bottom halves having different precision. This allows one to see whether
10bpc support is working properly or not, as there are many pieces to
the puzzle beyond the basic format support (gamma ramps, bpc encodings,
etc).
This is really only useful on 10bpc formats, but we also add support for
8bpc formats to ease testing. In the future, this could be applied to
16bpc formats as well.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
We need to shift the values up, otherwise we'd end up with a negative
shift. This works for up-to 16-bit components, which is fine for now.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This also adds a helper to generate a color LUT, which has to be used in
conjunction with the C8 indexed format.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
With different register offsets from VCN1.0
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Feature is controlled by DRM_CAP_SYNCOBJ_TIMELINE drm capability.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: drop DRM_SYNCOBJ_CREATE_TYPE_TIMELINE, fix timeout calculation,
fix some warnings
v3: add export/import and cpu signal testing cases
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The pointer p aquired with drmModeGetPlane() is not free in error
path. Fix possible memory leak by calling drmModeFreePlane() in
the error path.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
This makes the test utilities work with the Armada driver without the
necessity of using the -M argument.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Saw a couple of typos fixes in the patch DragonFlyBSD carries [1], so
I ran codespell (a spell checker for code) on the whole repo.
[1] https://github.com/DragonFlyBSD/DPorts/blob/master/graphics/libdrm/files/patch-xf86drm.c
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
struct drmPciBusInfo has been aligned to 6 bytes. So memcmp will access
the last byte which is not initialized.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support per device test mask. Skip inject test on non-server card.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memcpy draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset draw test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memcpy dispatch test for gfx9
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add memset dispatch test for gfx9
v2: disable dispatch test for other ASICs
Signed-off-by: Flora Cui <flora.cui@amd.com>
Tested-by: Rui Teng <rui.teng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
deadlock test for sdma will cause gpu recoverty.
disable the test for now until GPU reset recovery could survive at least
1000 times test.
v2: add modprobe parameter
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just make them properly i.e. put 0 to the Nop reg
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the kernel doesn't crash if we map something at the minimum/maximum address.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Error message was invalid too, negative values aren't the number of
devices, they're errno error codes.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Since only for those ASICs gpu reset is enabled by deafult.
Also update disable message and fix identation .
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Illegal access will cause CP hang followed by job timeout and
recovery kicking in.
Also, disable the suite for all APU ASICs until GPU
reset issues for them will be resolved and GPU reset recovery
will be enabled by default.
v2:
Add KV to deasbled APUs list and add comments regarding
necessary kernel amdgpu paramteres to run the tests.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Seems like AI and RV requires uncashed memory mapping to be able
to pickup value written to memory by CPU after the WAIT_REG_MEM
command was already launched.
.
Enable the test for AI and RV.
v2:
Update commit description.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
v2:
Call amdgpu_bo_va_op_raw directly in amdgpu_bo_alloc_and_map_raw
Move amdgpu_bo_alloc_and_map_raw into C file to avoid including
unistd.h in amdgpu_test.h
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This is the DRM driver for all Allwinner (sunxi) platforms.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Use libutil to lookup connector type names and state. This also
makes sure that the latest connector type addition "DPI" gets
printed correctly.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Now that symbols that should be exported are annotated accordingly, make
all the rest hidden by default.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Now that symbols that should be exported are annotated accordingly, make
all the rest hidden by default.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Add allocation tests for GDW, GWS and OA.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the calling function won't notice that something is wrong.
v2: check map result as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Make a VM mapping which is as unaligned as possible.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
disable deadlock test suite for RV
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a test for API to query bo by CPU mapping
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
If "-a" option is set this make modetest use atomic API instead
of legacy API.
Test the frame rate ("-v") it does a loop and swap between two
framebuffer for each active planes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
While fairly close, the host1x and platform are two separate things.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Making the output a little bit easier to parse by human beings.
v2: Add extra whitespace (Eric)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com> (v1)
Reviewed-by: Robert Foss <robert.foss@collabora.com> (v1)
Reviewed-by: Eric Engestrom <eric@engestrom.ch> (v1)
Add a few printf statements, which should make the output easier to
parse.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
It's mildly useful program, to ship it when the user wants the "tests"
installed. Obviously the "tests" in the name is a misnomer.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
128 is the maximum number of cards that the kernel can support
at the moment.
Change-Id: I155b7b21635306d8ecc440b85fb8954501ab5599
Signed-off-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This will prevent any more missing `#include "config.h"` bug, at the
cost of having to recompile some files that didn't need to be when
changing build options.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixed memory leak issue to drmModeRes and drmModePlaneRes objects.
These objects were allocated by drmModeGetResources and
drmModeGetPlaneResources functions but not freed properly.
So this patch frees them by calling drmModeFreeResources
drmModeFreePlaneResources functions at failure case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
There is already condition checking input values between 2 and 4096
so condition checking 0 is always false. Remove the dead condition.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
if some system has no swap space and memory is less, than the test
could fail.
And bo eviction test takes much more time in some system, which effects
automation test result and efficiency.
So disable it by default now, only be used by developer manually.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
The existing format modifier definitions were merged prematurely, and
recent work has unveiled that the definitions are suboptimal in several
ways:
- The format specifiers, except for one, are not Tegra specific, but
the names don't reflect that.
- The number space is split into two, reserving 32 bits for some
"parameter" which most of the modifiers are not going to have.
- Symbolic names for the modifiers are not using the standard
DRM_FORMAT_MOD_* prefix, which makes them awkward to use.
- The vendor prefix NV is somewhat ambiguous.
Fortunately, nobody's started using these modifiers, so we can still fix
the above issues. Do so by using the standard prefix. Also, remove TEGRA
from the name of those modifiers that exist on NVIDIA GPUs as well. In
case of the block linear modifiers, make the "parameter" smaller (4
bits, though only 6 values are valid) and don't let that leak into any
of the other modifiers.
Finally, also use the more canonical NVIDIA instead of the ambiguous NV
prefix.
This is based on commit 5843f4e02fbe86a59981e35adc6cabebee46fdc0 from
Linux v4.16-rc1 and also updates modetest to use the new defines.
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
for(( i=1; i < 100; i++))
do
echo "Hello, Welcome $i times "
sudo ./amdgpu_test -s 1 -t 5
done
with above stricpt, run in two terminals, will reproduce Felix's swap leeking issue.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Otherwise we'll end up without the macros set during configure stage.
And effectively error out in sanity tests such as the mmap static
assert.
To reproduce, do a multilib build - 32bit build on 64bit machine.
Cc: Fabio Pedretti <pedretti.fabio@gmail.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Fixes: 33dcc29f7c ("amdgpu: Add VMID reservation per GPU context test.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104819
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
While at it, align with the other half on the next line.
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
If amdgpu_cs_query_fence_status terminates prematurely the BO
sometimes is unmapped before helper thread writes a vlaue
into it causing a segfault.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Kernel will abort jobs for guilty (causing GPU hang) context
with -ECANCELED don't assert if that the case.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
There is warning about ignoring return value of 'asprintf'. Fix to
check return value of asprintf().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Fixes use after free:
==2537== Invalid read of size 4
==2537== at 0x1162C9: suite_deadlock_tests_enable (deadlock_tests.c:101)
==2537== by 0x10B157: amdgpu_disable_suits (amdgpu_test.c:421)
==2537== by 0x10B157: main (amdgpu_test.c:560)
==2537== Address 0x5e44f24 is 452 bytes inside a block of size 1,016 free'd
==2537== at 0x4C2BE1B: free (vg_replace_malloc.c:530)
==2537== by 0x504CD8B: amdgpu_device_reference (amdgpu_device.c:164)
==2537== by 0x504CD8B: amdgpu_device_deinitialize (amdgpu_device.c:307)
==2537== by 0x1162BB: suite_deadlock_tests_enable (deadlock_tests.c:97)
==2537== by 0x10B157: amdgpu_disable_suits (amdgpu_test.c:421)
==2537== by 0x10B157: main (amdgpu_test.c:560)
==2537== Block was alloc'd at
==2537== at 0x4C2CC05: calloc (vg_replace_malloc.c:711)
==2537== by 0x504CA5E: amdgpu_device_initialize (amdgpu_device.c:212)
==2537== by 0x116298: suite_deadlock_tests_enable (deadlock_tests.c:93)
==2537== by 0x10B157: amdgpu_disable_suits (amdgpu_test.c:421)
==2537== by 0x10B157: main (amdgpu_test.c:560)
Reviewed-by: Christian König <christian.koenig@amd.com>
This patch adds a complete meson build system, including tests and
install. It has the necessary hooks to allow it be used as a subproject
for other meson based builds such as mesa.
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fixes: 806d080360 (amdgpu: Use new suite/test disabling functionality.)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=104280
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The test is as following:
1) Create context A & B
2) Send a command submission using context A which fires up a compute shader.
3) The shader wait a bit and then write a value to a memory location.
4) Send a command submission using context B which writes another value to the same memory location, but having an explicit dependency on the first command submission.
5) Wait with the CPU for both submissions to finish and inspect the written value.
Test passes if the value seen in the memory location after both submissions is from command B.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Disable the test instead of doing #ifdef 0
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The test stalls the CP, until RCA is done the test is
disabled to not disrupt regression testing.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Allocates 1 TB of memory. Test is disabled by default
since it's triggers OOM killer.
v2:
FIx the test to only alloc the BO and assert if return value
not equal to -ENOMEM and remove test disable on start.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Switch from disabling tests during run to using the new disable
API.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Suits are diasbled based on hooks they provide (e.g incompatible
ASIC or missing blocks). Single tests are diasbled explicitly.
Suit or test can be forced to execute even if disabled by adding -f
flag after specifying suit [test] ids.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Change GPL license of Exynos related code to X11/MIT.
I'd like to keep a consistent license across all Exynos code
because License checker notices two more licenses exist
in libdrm.
For the license change I need to get your agree - all committers.
So please give me Acked-by if you agree with me.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Hyungwon Hwang <human.hwang@samsung.com>
Acked-by: SooChan Lim <sc1.lim@samsung.com>
Acked-by: Sangjin LEE <lsj119@samsung.com>
Acked-by: Boram Park <boram1288.park@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Jan Vesely <jan.vesely@rutgers.edu>
Rmove amdgpu_context_handle from the interface and use
amdgpu_device_handle instead. Uupdate VMID reservation test
accordingly.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The test will Reserve a VMID, submit a command and
unreserve the VMID.
v2:
Wrappers names were changed.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Allow the user to override the default configuration set by setcrtc
for the primary plane. On some hardware primary planes can be freely
positioned/sized, and it'd be nice if we can actually test that feature.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This teaches modetest about the new IN_FORMATS blob and decodes the
blob to show supported formats and modifiers.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
In uvd encode parameter package, parameters input_pic_luma_pitch and
input_pic_chroma_pitch should be picture width align with hardware alignment.
The hardware alignment is 16 for amdgpu family earlier than AMDGPU_FAMILY_AI,
and 256 for later than and including AMDGPU_FAMILY_AI.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Query hardware IP information to find out if there are uvd encode rings
ready for use in kernel driver.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Adding initial tests for locks detection when SW
scheduler FIFO is full.
The test works by submitting a batch of identical commands which make the CP
stall waiting for condition to become true. The condition is later satisfied
form a helper thread. Other events that happen during this time
might create deadlock situations. One such example is GPU reset
triggered by this stall when amdgpu_lockup_timeout != 0.
v2:
Increase the delay from 2 to 100 ms.
Comment out the compute test until it's working.
Typos fix.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes the tarball generation.
fixes: 9d133dd087 (tests/amdgpu: add uvd encode unit tests)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=102391
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher at amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The device_id option [-d] was badly broken. This commit fixes
the width (was 8 is now 16 bits) as well as enables searches
without specifying a bus id. It was also comparing "dev" from
the bus field which is not the PCI device id.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
fourcc is not a string, it's a packed integer. This happens to work out
on LE, but gets reversed on BE.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: monk.liu <Monk.Liu@amd.com>
[v2: actually hook up the test case]
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
These tests depend on tests/util/ headers, but expect the include path
to be tests/.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch fixes invalid code of error path including NULL
deference and leak in g2d test.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The function g2d_blend_test() is blocked to call because of
feature unsafety. This patch blocks with proper feature name
and also blocks the function itself to remove build warning.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
swizzle mode needs reference and input picture luma and
chroma pitch aligned with 256
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Earlier commit removed all the legacy 'tests' but a file was left
danglig.
Fixes: 0c80fddd1d "tests: remove useless legacy tests"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reported-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested:
1. As root, tests passed on primary.
2. As root, tests passed on render node.
BO export/import test was skipped
3. As non-privileged user, tests failed on primary as expected.
4. As non-privileged user, tests passed on render node.
BO export/import test was skipped
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can be used to test multiple GPUs
v2: Use PCI bus ID and optional PCI device ID to choose device
Add an option to display information of AMDGPU devices
Tested:
./amdgpu_test -p
./amdgpu_test
./amdgpu_test -b 1 #fail as expected
./amdgpu_test -b 6 #pass
./amdgpu_test -b -d 1 #fail as expected
./amdgpu_test -b -d 0 #pass
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify the vender ID and driver name.
Open all AMDGPU devices.
Provide an option to open render node.
Tested as root: PASS
Tested as non-privileged user:
All tests failed as expected
v2: Return value in the ene of function amdgpu_open_devices.
Check the return value of amdgpu_open_devices.
amdgpu_test is not for USB device for the time being.
Get the name of node from function drmGetDevices2.
Drop the legacy drmAvailable() from the test.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-lpthread is not always a valid flag to pull pthread support, especially
on Android it will fail to link due to a missing libpthread.so. The more
generic way to build-in pthread support is to use the -pthread CFLAG, so
let's use it instead.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
[Emil Velikov: rebase on top of previous commit]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since we don't have any C++ souces this should be a no-op. Folding the
two seems to be the common practise throughout the repo.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
... across the makefiles. Currently this isn't much but that will change
shortly.
As an added bonus this fixes all present and future cases where we've
forgotten to strip out the headers from LOCAL_SRC_FILES.
In a couple of cases (the tests) we start setting
LOCAL_EXPORT_C_INCLUDE_DIRS, which shouldn't be an issue.
Cc: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Seems to be the default option since ~2009 with commit 2f31293ba78 "auto
import from //branches/cupcake/...@137197". Fleshed out from a larger
commit in the AOSP repo/fork.
Cc: Dan Willemsen <dwillemsen@google.com>
Cc: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Extend the drmdevice test with support for the newly added USB, platform
and host1x busses.
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for Amlogic Meson DRM driver merged for Linux 4.10.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Before this change, the error message is:
"WARNING - Suite initialization failed..."
People might think this is a driver problem.
Tested with non-privileged user. Now the error message is like:
...
Error:Permission denied. Hint:Try to run this test program as root.
WARNING - Suite initialization failed for 'Basic Tests'.
...
Tested as root with no regression.
amdgpu_test uses CUnit. CUnit outputs warning message to stdout.
To be consistent, this commit outputs error message to stdout.
v2: Use strerror instead of %m. %m is a GNU C Library extension.
v3: Limit code and commit message within 80 characters per line.
Update commit message.
Remove a space before starting parenthesis in function call.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All of these 'tests' cover UMS functionality which is neither being
worked on or actively maintained.
The only cases where developers touch UMS code is to unwrap it from the
KMS codepaths and ensure that those are secure.
Anyone who feels strong about having these around can revive them, but
in all honestly do consider _seriously_ what you're doing ;-)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass along DRM_DEVICE_GET_PCI_REVISION only when the individual nodes
are opened and update the printed messages accordingly.
v2: Attribute for the flag rename, call drmGetDevices2 w/o the flag.
v3: Keep drmParsePciDeviceInfo() hunk in previous patch.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
There is no need to maintain the value in the shadowed variable from
what I can see.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Adapt to recent firmware update, it's also compatible with previous
firmware version
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This adds the following basic unit tests:
- etnaviv_2d_test
Let the 2D core render a defined pattern into a bo
and store it as bmp.
- etnaviv_bo_cache_test
Basic tests to validate the bo-cache behavior.
- etnaviv_cmd_stream_test
Tests for the etna_cmd_stream API.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This can be useful for debugging. xrandr prints it, so why not.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
There is a mediatek drm kms driver: Add "mediatek" to the static
lists of driver names.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: JB Tsai <jb.tsai@mediatek.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Currently only some Android Makefiles are included in the release tarball.
To be more consistent one could either add the remaining files or don't
ship Android Makefiles altogether.
According to Emil the Android folk doesn't use our release tarballs.
Thus it makes sense to remove those files from distribution which also
means less work for maintenance in the future.
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
AOSP master now errors if LOCAL_SRC_FILES contains headers, so filter
out header files from the source lists.
Signed-off-by: Rob Herring <robh@kernel.org>
Not initializing the ip instance leads to sporadic fails in the tests.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
modetest was failing to work with driver because it wasn't in the
module list.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Share with upcoming CP tests.
v2: drop unnecessary forward declaration
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The utils library depends on libdrm. Flip the order, orderwise we might
error during link stage like below:
CC main.o
CCLD kmstest
/usr/bin/ld: ../../tests/util/.libs/libutil.a(libutil_la-kms.o):
undefined reference to symbol 'drmOpen'
Reported-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Used in compliance with POSIX 2001/2008
Fixes errors e.g.
error: implicit declaration of function 'select'
and helps with missing definitions of FD_* defines
v2: conditionally include sys/select.h, include in every test where
needed.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
util_open() takes a device parameter, followed by a module parameter.
The existing tests used the drmOpen() function, which uses a different
ordering of the parameters, and the old ordering was accidentally kept
during the conversion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use the new util_open() helper instead of open-coding the method for
finding a usable device. While at it, make the command-line interface
more consistent with that of modetest by adding the -D and -M options.
Signed-off-by: Stefan Agner <stefan@agner.ch>
v2: correctly use util_open() - swap device, module
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The comment has been copied from modetest and is not applicable
for vbltest.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Use the new util_open() helper instead of open-coding the method for
finding a usable device. While at it, this adds -D and -M command-line
options to vbltest to make its usage more consistent with its siblings
modetest and proptest.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use the new util_open() helper instead of open-coding the method for
finding a usable device. While at it, make the command-line interface
more consistent with that of modetest by adding the -D and -M options.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Use the new util_open() helper instead of open-coding the method for
finding a usable device.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
The new function util_open() encapsulates the standard method employed
by tests to open a device or module. There is a verbatim copy of this in
almost all test programs, with slight variations in the list of modules.
Moving this code into a common helper allows code reuse and makes tests
more consistent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This small program allows universal planes to be tested. Currently this
isn't very flexible because it allows only the first plane of a given
type to be tested on the first CRTC. However it should be simple to
extend this with some additional command-line arguments.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This test program sets a mode and framebuffer on a connector and cycles
through all CRTCs, moving the connector to each of them in turn. This is
useful to verify that CRTC stealing is properly handled in the DRM core
and drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This library contains abstractions for KMS that help remove the need for
a lot of boilerplate in KMS test programs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
These tables are duplicated in several places, so move them into libutil
so that they can be shared.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Some of the helpers, such as the pattern drawing helpers or the format
lookup helpers, have potential to be reused. Move them into a separate
library to make it easier to share them.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
To check if g2d_move() works properly we create a small checkerboard
pattern in the center of the screen and then shift this pattern
around with g2d_move(). The pattern should be properly preserved
by the operation (but not the surrounding area).
Tested-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
[Emil Velikov: add g2d_move to the symbol check]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This matches the G2D color mode that is used in the entire code.
The previous (incorrect) RGBA8888 would only work since the
Exynos mixer did its configuration based on the bpp, and not
based on the actual pixelformat.
Reviewed-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
This tests async processing of G2D jobs. A separate thread is spawned
to monitor the DRM fd for events and check whether a G2D job was
completed.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Currently only fast solid color clear performance is measured.
A large buffer is allocated and solid color clear operations
are executed on it with randomly chosen properties (position
and size of the region, clear color). Execution time is
measured and output together with the amount of pixels
processed.
The 'simple' variant only executes one G2D command buffer at
a time, while the 'multi' variant executes multiple ones. This
can be used to measure setup/exec overhead.
The test also serves a stability check. If clocks/voltages are
too high or low respectively, the test quickly reveals this.
Tested-by: Hyungwon Hwang <human.hwang@samsung.com>
Reviewed-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
A simple example of how to use/what is the new drm{Get,Free}Devices()
interface.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fixes "error: implicit declaration of function 'alloca'" failures
when building on Solaris
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Fixes build failure due to unresolved log2.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
In the latest version of CUnit the fourth parameter of the CU_SuiteInfo
struct is pSetUpFunc rather than *pTests.
Seems like the CUnit ABI broke at some point, so let's the the robust
thing and use c99 designated initializers to correctly populate the
struct(s).
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The remaining two templates are modified on the fly, depending on the
type of test to be performed.
Cc: Leo Liu <leo.liu@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Allow connector names to be used in the specification of the -s option.
This requires storing the string passed on the command-line so that it
can later be resolved to a connector ID (after the DRM device has been
opened).
Connector names are constructed from the connector type name and
connector type ID using the same format as used internally in the
Linux kernel.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The following interfaces are changed accordingly:
- amdgpu_bo_alloc
- amdgpu_create_bo_from_user_mem
v2: update the interfaces
v3: remove virtual_mc_base_address from amdgpu_bo
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
make amdgpu_cs_query_fence reusable to support multi-fence query
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Not useful if we're gonna use BO handles directly.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: cleanup comments and function parameter
v3: rebased on internal branch
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the mostly unused device parameter, for the few cases
where we really need it keep a copy in the context structure.
v2: rebased on internal branch
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds some basic unit tests for the new amdgpu driver.
v2: use common util_math.h
v3: implement suggestions from Emil
replace malloc/memset with calloc
make header guards all caps
use posix_memalign rather than mem_align
replace malloc with calloc for pm4 allocations
make CU_SuiteInfo static
fix Makefile.am
fix fd numbering
use drmGetVersion/drmFreeVersion rather than open coding it
close fd, clean up CU registry on error
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used by radeon and freedreno and will be used
by amdgpu. I looked at switching to libdrm_lists.h,
but it's pretty horrible. E.g., DRMLISTFOREACHENTRYSAFE.
v2: remove missed list.h from tests/radeon/Makefile.am
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vbltest doesn't have any dependency of LIBUDEV.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Follow the approach used through the rest of the project.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
This fixes a compiler warning about missing handling of enum
values in the switch statements.
Also remove the silent mapping to G2D_IMGBUF_GEM when an
unknown buffer type is encountered. We have full control
about the type here, and if it's unknown then we obviously
have a bug in the code.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
No test uses DRM planes at the moment so this function
is never called. Inspection of the git history shows
that DRM planes were also never used in these tests
in the past.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
We can just return 'ret' here, the goto serves no purpose.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
xinxu@loongson.cn
Devarsh Thakkar
Eric Engestrom
Marek Olšák
Nirmoy Das
Le Ma
Guchun Chen
Flora Cui
Ilia Mirkin
Leo Liu
Chunming Zhou
Seung-Woo Kim
Lubomir Rintel
Fritz Koenig
Pan, Xinhui
Andrey Grodzovsky
Christian König
Ezequiel Garcia
Stefan Agner
Lucas De Marchi
Likun Gao
Junwei Zhang
Benjamin Gaignard
Emil Velikov
Xiaojie Yuan
James Zhu
Eric Engestrom
Inki Dae
Michel Dänzer
Thierry Reding
Dylan Baker
Hawking Zhang
Ville Syrjälä
Kristian H. Kristensen
Alex Deucher
Jan Vesely
Boyuan Zhang
Tom St Denis
Eric Anholt
Nicolai Hähnle
Bernd Kuhls
Rob Herring
Huang Rui
Alex Xie
Tomasz Figa
Emil Velikov
Neil Armstrong
Grazvydas Ignotas
The etnaviv authors
Stéphane Marchesin
Daniel Kurtz
satsahu
Andreas Boll
Sonny Jiang
Daniel Vetter
Eric Engestrom
Gustavo Padovan
Kylie McClain
Khem Raj
Tobias Jakobi
Alan Coopersmith
Hyungwon Hwang
Tapani Pälli
Ken Wang
Jammy Zhou
Joonyoung Shim