* Fixes for IME Composition Truncation + Addition of SDL_ClearComposition, SDL_IsTextInputShown
* Fixed: Documentation and code style issues raised during code review.
The name that the Raw Input joystick driver pulls from the HID stack comes
from USB string descriptors contained on the device. For official wireless
receivers, this always contains "Xbox 360 Wireless Receiver for Windows"
which matches the friendly name that WGI provides.
3rd party Xbox 360 wireless receivers may have different strings in their
USB string descriptors (one uses "XBOX 360 For Windows" instead). This
fails to match WGI's name and causes Raw Input and WGI to both report the
same gamepad.
Since wireless Xbox 360 controllers seem to have a consistent VID/PID
regardless of the adapter enumerating them, we can also match on that to
catch these.
The duplicate case reported to me was:
Controller (XBOX 360 For Windows) - 030000005e040000a102000000007200
Xbox 360 Wireless Receiver for Windows - 030000005e0400000000000000007701
This adds support for all 3 of the gamecube controller's rumble modes
Rumble: 1
Stop: 0
StopHard: 2
This is useful for applications that need the full range of support
This also adds a hint to control rumble behavior, defaults 0 to maintain compatibility
If the app requested a specific renderer, even if it's not the optimal path,
let them have it, because they might want to render with a specific GPU API
on top of the framebuffer pixels.
This fixes DosBox-X crashing on startup, which forces the hint to "opengl".
Now we see if we can create an SDL_Renderer, and if that renderer reports
itself as "accelerated," and added some initial heuristics to the OpenGL
renderer to make better decisions about what qualifies as "accelerated."
This adds some FIXMEs that might be merely hypothetical, and removes the
old OpenGL checks from the video subsystem that probably weren't meaningful
in modern times. This will definitely need to improve the existing list
in the GL renderer, to catch things like llvmpipe, etc.
Reference issue #4624.
The io_list_check_add() and io_list_remove() functions are only ever called from within the Pipewire thread loop, so the locks are redundant. io_list_sort() is called from within a lock in the device detection function, so those additional locks are redundant as well.
Remove the hard upper limit of 8192 samples and instead use the buffer sizes provided by Pipewire to determine the size of the intermediate input buffer and whether double buffering is required for output streams. This allows for higher latency streams to potentially avoid double-buffering in the output case, and we can guarantee that the intermediate input buffer will always be large enough to handle whatever Pipewire may deliver.
As the buffer size calculations occur in a callback in the Pipewire processing thread itself, the stream readiness check has been modified to wait on two distinct flags set when the buffers have been configured and when the stream is ready and running.
- use the result of SDL_ConvertPixels to propagate error
- get rid of the verbose error message of D3D11_RenderReadPixels in case SDL_ConvertPixels failed
- always set error message in SDL_EGL_ChooseConfig / SDL_EGL_CreateContext
- assume SDL_EGL_DeleteContext does not alter the error message
- sync generic error message of SDL_EGL_MakeCurrent with SDL_EGL_Get/SetSwapInterval
- do not overwrite error message of SDL_EGL_ChooseConfig in WINRT_CreateWindow
- add missing error-message in SDL_LoadBMP_RW
- check return value of SDL_RWtell in SDL_LoadBMP_RW
- use standard SDL_EFREAD error instead of custom strings
+ adjust return type of readRlePixels
- allocate ime_candidates on demand
- allow write to the whole allocated memory of ime_candidates
- ensure ime_candcount is set to zero in case the candidates can not be queried for any reason
- move IME_ShowCandidateList, ImmGetContext and ImmReleaseContext to this function
- set ime_candpgsize to MAX_CANDLIST if dwPageSize is zero
- comment out deselection of ime_candsel in case of korean language for the moment (LANG_CHT does not work anyway)
The context and stream creation functions will destroy the passed properties object on failure, so no need to do it manually.
The pw_properties_free() function pointer is no longer needed, so it can be removed.
This reverts commit ca36cdb185f2f26241598068927821896f36b904.
The older Windows SDK's headers are wrong, and this change would crash if
you hotplug a device.
- drop unnecessary hascapture check
- call SDL_InvalidParamError and return -1 in case the index is out of range
- do not zfill SDL_AudioSpec
- adjust documentation to reflect the behavior
- reorganize the loop which checks for the right wave-format
- use the return value of UpdateAudioStream
- ensure SetError is called in SDL_NewAudioStream
- use assert instead of a check (it is a static function with constant parameter)
- assume it is called with 0 first (simplifies the logic)
- reuse dwLang value instead of a new 'call' to LANG()
- use SDL_bool if possible
- assume NULL/SDL_FALSE filled impl
- skip zfill of current_audio at the beginning of SDL_AudioInit (done before the init() calls)
If we get a SDL_SetWindowSize() call right after SDL_SetWindowFullscreen() but
before we've gotten a new configure event from the compositor, the attempt to
set our window size will silently fail (when libdecor is enabled).
Fix this by remembering that we need to commit a new size, so we can do that
in decoration_frame_configure().
This prevents SDL from making an OpenGL context and maybe throwing it away
immediately by default. It will now only do it when trying to request a
window framebuffer directly, or creating an SDL_Renderer with the "software"
backend, which makes that request itself.
The way SDL decides if it should use a "texture framebuffer" needs dramatic
updating, but this solves the immediate problem.
Reference Issue #4624.
First window is created and it triggers and 'EnterNotify' event
which calls SDL_SetMouseFocus() and X11_ShowCursor() while the second
windows hasn't finished to be created (eg window->driverdata isn't set)
Just check for a valid 'driverdata'
The issue is that MS Windows synthesizes a mouse-move event in response
to touch-move events, and those mouse-move events are NOT labeled as
coming from a touch (e.g. GetMouseMessageSource() will not return
SDL_MOUSE_EVENT_SOURCE_TOUCH for those synthesized mouse-move events).
In addition, there seems to be no way to prevent this from happening;
https://gist.github.com/vbfox/1339671 claims to demonstrate a technique
to prevent it, but in my experience, it doesn't work.
Because of this, the "fallthrough" case can't test that the synthesized
mouse-move came from a touch-move, and starts erroneously pressing down
the mouse-button, leading to massive confusion in the client
application.
If a touch-down event is received for an existing touch-ID, that
probably means the operating system lost it, and that the missing
touch-up should be synthesized, to keep the client state coherent.
This caused some weird stuff to happen in the libdecor path, probably because
the window hasn't actually been mapped yet. It ends up calling stuff that
should not yet apply, and so fullscreen in particular would have a really
messed up titlebar.
The good news is, libdecor is good about tracking fullscreen state, so we can
let the callback do this for us. Keep this for xdg_shell because we actually
map the window ourselves, so we know this call is valid for that path.
Pipewire, as of 0.3.22, uses client config files to load modules instead of explicitly specifying them (PW_KEY_CONTEXT_PROFILE_MODULES is deprecated). Use the new method to load the realtime module to boost the audio thread priority.
From e6cc4e7f4b8189be55dd3b0e13e54e59f73d7672 Mon Sep 17 00:00:00 2001
From: X512 <danger_mail@list.ru>
Date: Thu, 30 Jan 2020 04:01:58 +0900
Subject: libsdl2: Remove BDirectWindow, fix OpenGL handling.
* BDirectWindow changed to BWindow.
* Implemented fullscreen.
* Introduced view for non-OpenGL drawing.
* Drawing thread removed, window thread is used instead.
* Use BGLView as OpenGL context. Implement proper context switching and OpenGL
locking. Only one context per window is supported. BGLView should be not
deleted when window is closed, it deleted when deleting context.
Previous to this commit, key repeats events were typically generated when
pumping events, based on the time of when the events are pumped. However,
if an application doesn't call `SDL_PumpEvents` for some seconds, this time
can be multiple seconds in the future compared to the actual key up event time,
and generates key repeats even if a key was pressed only for an instant.
In practice, this can happen when the user presses a key which causes the
application to do something without pumping events (e.g. load a level).
In Crispy Doom & PrBoom+, when the user presses the key bound to "Restart
level/demo", the game doesn't pump events during the "screen melt" effect,
and the level is restarted multiple times due to spurious repeats.
To fix this, if the key up event is among the events to be pumped, we generate
the key repeats there, since in the Wayland callback we receive the time when
the key up event happened. Otherwise, we know no key up event happened and we
can generate as many repeats as necessary after pumping.
Signed-off-by: Joan Bruguera <joanbrugueram@gmail.com>
Refactorization with no functional changes.
Instead of `next_repeat_ms` containing a timestamp based on SDL ticks, we make
it zero-based relative to the key press time, and we store the key press time in
SDL ticks in a new field.
This refactorization is groundwork for future commits which need to use the
key press and release timestamps provided by the Wayland API, which are also
expressed in milliseconds, but whose base does not match the one for SDL ticks.
Signed-off-by: Joan Bruguera <joanbrugueram@gmail.com>
If `repeat_info->next_repeat_ms` overflows, many key presses will be generated.
In the worst case, `now = 0xFFFFFFFFU` and the loop will never terminate.
Rearrange the comparison in order to gracefully handle the overflow case.
Signed-off-by: Joan Bruguera <joanbrugueram@gmail.com>
src/render/psp/SDL_render_psp.c: In function 'PSP_RunCommandQueue':
src/render/psp/SDL_render_psp.c:1200: warning: passing argument 1 of 'PSP_SetBlendState' from incompatible pointer type
src/filesystem/psp/SDL_sysfilesystem.c: In function 'SDL_GetPrefPath':
src/filesystem/psp/SDL_sysfilesystem.c:71: warning: passing argument 1 of 'free' discards qualifiers from pointer target type
This reverts commit c477768e6f.
We want to add the sentinel anytime we pump inside SDL_WaitEventTimeout() to avoid pumping again the next time through, as a performance optimization.
We don't want to catch explicit SDL_PumpEvents() calls by the application with
our polling check to avoid stale data. If the call to SDL_PumpEvents() produced
no events, there will be a sentinel sitting in the queue that will cause
SDL_PollEvent() to immediately return 0 next time it is called.
Our SDL_WaitEventTimeout() implementation avoids this issue by always popping
an event after calling SDL_PumpEvents(). This will remove the new sentinel if
we didn't get any new events.
WGI calls SDL_DINPUT_JoystickPresent() so we need to be sure DInput remains
initialized for the lifetime of the WGI driver to avoid a crash or duplicated
joysticks between DInput and WGI.
If that condition was reachable, the return value should be negative to indicate that waiting for the timeout failed.
Otherwise, SDL_WaitEventTimeout would incorrectly return early.
SDL_Init(SDL_INIT_AUDIO) did not take into account that functions like
SDL_AddAudioDevice do register events, which will need final cleanup
and only gets fired when events were actually initialised.
Sample call stack of a malloc missing its free (Linux + PA):
SDL_malloc_REAL (SDL_malloc.c:5328)
SDL_AddEvent (SDL_events.c:445)
SDL_PeepEvents_REAL (SDL_events.c:531)
SDL_PushEvent_REAL (SDL_events.c:762)
SDL_AddAudioDevice (SDL_audio.c:443)
SourceInfoCallback (SDL_pulseaudio.c:681)
context_get_source_info_callback (introspect.c:534)
run_action (pdispatch.c:288)
pa_pdispatch_run (pdispatch.c:341)
pstream_packet_callback (context.c:349)
do_read (pstream.c:1012)
Fixes https://github.com/libsdl-org/SDL/issues/3005
When mouse buttons are swapped, right mouse button down is the same value as raw mouse button up, and conceptually the two systems use different button masks, so never cache state between the two.
Fixes https://github.com/libsdl-org/SDL/issues/5108
Program received signal SIGILL, Illegal instruction.
X11_InitKeyboard (_this=0x1001f8f0)
at /home/sdl/SDL_git/src/video/x11/SDL_x11keyboard.c:273
273 XKeyboardState values = { .global_auto_repeat = AutoRepeatModeOff };
If the X server's byte order is different from the client, things might
display in the wrong colour.
Apparently we can just set the byte_order field to the client's byte
order, and the X server will adjust everything automatically:
https://xorg.freedesktop.narkive.com/GbSD1aPq/ximage-s-byte-order-field
because:
- GeHint return a value pointer.
- SetHint free internally the pointer
- The -now invalid- pointer is re-read
==9363== Invalid read of size 1
==9363== at 0x4946860: SW_CreateRenderer (SDL_render_sw.c:1044)
==9363== by 0x48F0EC3: SDL_CreateRenderer_REAL (SDL_render.c:938)
==9363== by 0x48C5921: SDL_CreateRenderer (SDL_dynapi_procs.h:332)
==9363== by 0x401584: main (main.c:421)
==9363== Address 0x9c24040 is 0 bytes inside a block of size 1 free'd
==9363== at 0x484621F: free (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==9363== by 0x494E403: SDL_free_REAL (SDL_malloc.c:5432)
==9363== by 0x48A6153: SDL_SetHintWithPriority_REAL (SDL_hints.c:76)
==9363== by 0x48A6254: SDL_SetHint_REAL (SDL_hints.c:101)
Rounding the scroll deltas from trackpads causes jerky scrolling behavior
by artificially amplifying the effects of very small scroll movements.
We should only round events from devices with discrete scroll wheels,
because we know the smallest unit of movement there is a single tick.
- Fix SDL2main on PSP
SDL2main was not working for PSP, because it wasn't being activated and
it wasn't unsetting the main. Besides that a debug screen being started
was causing issues with joystick input and the sceKernelExitGame calli
is no longer needed with the current PSPDEV SDK.
- Clean up imports in PSP main
- Set PSP GPU and user modes in main
- Fix exit callback in PSP main
The xdg_shell spec seems to state[1] that xdg_toplevel_configure events can
always provide a 0×0 width/height to signal that the compositor doesn't
care. SDL previously assumed the provided width/height was always valid
for fullscreen windows, and so applied it as-is.
This broke SDL applications on KDE/KWin 5.23, which now sends 0×0
configure events (and, in 5.23.3, 1×1 events for some reason), breaking
all SDL applications in fullscreen[2].
[1]: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/issues/6
[2]: https://bugs.kde.org/show_bug.cgi?id=444962#c6
Otherwise, if one builds libSDL2_test using a new mingw but builds
the test programs using an older mingw, a link failure happens:
/opt/local/x86_64-w64-mingw32/lib/libSDL2_test.a(SDL_test_common.o): In function `printf':
/opt/local/x86_64-w64-mingw32/include/stdio.h:372: undefined reference to `__imp___acrt_iob_func'
collect2: ld returned 1 exit status
gbm_device_get_fd() in at least some libmali versions duplicates handle.
Other implementations do not do duplication. To prevent handle leak save
drm_fd in SDL_DisplayData.
When our keyboard grab hook is installed, GetKeyState() will return 0 for the
GUI keys even when they are pressed. This leads to spurious key up events when
holding down the GUI keys and the inability to use any key combos involving
those modifier keys.
This fixes a compile warning — and possible invalid memory read —
introduced in 9c03d255 ("Add back X11 legacy WM_NAME encodings"), which
was part of PR #5029, fixing Bug #4924.
The issue is with one of the added warnings in X11_GetWindowTitle().
Basically, the "title" variable passed to SDL_LogError() hasn't been
initialised yet: we could pass propdata in directly, but it's better to
move the SDL_LogError() call until after title is set, IMHO.
This fixes the following warning from gcc (SUSE Linux) 11.2.1:
In file included from /home/david/Development/SDL/src/video/x11/../../SDL_internal.h:45,
from /home/david/Development/SDL/src/video/x11/SDL_x11window.c:21:
/home/david/Development/SDL/src/video/x11/SDL_x11window.c: In function 'X11_GetWindowTitle':
/home/david/Development/SDL/src/video/x11/../../dynapi/SDL_dynapi_overrides.h:33:22: warning: '%s' directive argument is null [-Wformat-overflow=]
33 | #define SDL_LogDebug SDL_LogDebug_REAL
/home/david/Development/SDL/src/video/x11/SDL_x11window.c:720:13: note: in expansion of macro 'SDL_LogDebug'
720 | SDL_LogDebug(SDL_LOG_CATEGORY_VIDEO, "Failed to convert WM_NAME title expecting UTF8! Title: %s", title);
| ^~~~~~~~~~~~
Closes#4924.
Based on patches of the past, such as this work by James Cloos in July
2010:
d7d98751b7,
as well as code comments in the Perl module X11::Protocol::WM
(https://metacpan.org/pod/X11::Protocol::WM) and even the code to Xlib
itself, which taught me that we should never have been using
`XStoreName`, all it does is call `XChangeProperty`, hardcoded to
`XA_STRING`!
What can I say, when the task is old school, the sources are too 😂
On Win32 this list is empty and we always get controller added events. On UWP, this list is populated and we don't get controlle added events for currently connected controllers.
This is to workaround systems where we hang in playback because the buffer
does not report the space for whatever reason. The system will instead block
in PlayDevice, which always immediately follows WaitDevice in modern times
so this works out, and it seems to keep the device moving forward.
For a future revision, we are either going to clean this up more properly,
or attempt to move to PulseAudio's pa_stream_set_write_callback() API, but
this will do for SDL 2.0.18.
Reference #4387 for discussion and further information.
Touching HID devices with keyboard usages will trigger a keyboard capture
permission prompt on macOS 11+. See #4887
Like the IOKit joystick backend, we accept HID devices that have joystick,
gamepad, or multi-axis controller usages. We also allow the Valve VID for
the Steam Controller, just like the Windows HIDAPI implementation does.
We can also ditch the lock in RAWINPUT_JoystickQuit() now that the joystick
subsystem quits drivers in reverse order. There's no chance of a racing call
to RAWINPUT_WindowProc() anymore.
SDL_WINDOWS_JoystickDriver depends on callbacks in SDL_RAWINPUT_JoystickDriver
and SDL_HIDAPI_JoystickDriver being available. It also manages the common
WindowProc used for joystick detection in both WINDOWS and RAWINPUT drivers.
If we don't tear them down backwards, there's a window of time where we could
invoke RAWINPUT_WindowProc() after RAWINPUT_JoystickQuit() was called.
Since accessing Bluetooth prompts the user for permission on both Android and iOS, and we only need it for Steam Controller support, we'll leave it off by default. You can enable it by setting the hint SDL_HINT_JOYSTICK_HIDAPI_STEAM to "1" before calling SDL_Init()
Fixes https://github.com/libsdl-org/SDL/issues/4952
macOS 10.6 has some touch NSEvents which do not have a subtype
(Begin/EndGesture, Magnify, Rotate, Swipe) and cause an uncaught
exception which triggers SIGABRT and the program exits.
As it is, none of the macOS 10.6 touch events are detected as a
trackpad (including Gesture due to using different subtypes).
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Clang before Clang 10 and GCC before GCC 7 have problems with using
__attribute__ as a sole statement and warn about a "declaration not
declaring anything", so fall back to using the /* fallthrough */ comment
if we are using those older compiler versions.
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
Case fallthrough warnings can be suppressed using the __fallthrough__
compiler attribute. Unfortunately, not all compilers have this
attribute, or even have __has_attribute to check if they have the
__fallthrough__ attribute. [[fallthrough]] is also available in C++17
and the next C2x, but not everyone uses C++17 or C2x.
So define the SDL_FALLTHROUGH macro to deal with those problems - if we
are using C++17 or C2x, it expands to [[fallthrough]]; else if the
compiler has __has_attribute and has the __fallthrough__ attribute, then
it expands to __attribute__((__fallthrough__)); else it expands to an
empty statement, with a /* fallthrough */ comment (it's a do {} while
(0) statement, because users of this macro need to use a semicolon,
because [[fallthrough]] and __attribute__((__fallthrough__)) require a
semicolon).
Applications using SDL are also free to use this macro (because it is
defined in begin_code.h).
All existing /* fallthrough */ comments have been replaced with this
macro. Some of them were unnecessary because they were the last case in
a switch; using SDL_FALLTHROUGH in those cases would result in a compile
error on compilers that support __fallthrough__, for having a
__attribute__((__fallthrough__)) statement that didn't immediately
precede a case label.
This causes lots of spam in test automation and it's not clear it's useful to developers. If we need this level of validation, we should add a log category for it.
Since the haptic subsystem is usually initialized after the joystick subsystem,
the initial calls to HapticMaybeAddDevice() from inside SDL_JoystickInit() will
arrive too early to be handled by the haptic subsystem. We need to add those
haptic devices for those already present joysticks ourselves.
* SDLTest_CommonDrawWindowInfo: log SDL_RenderGetScale, SDL_RenderGetLogicalSize
* testwm2: fix video modes menu hit detection in High DPI cases
- also when logical size is specified, e.g.
`--logical 640x480 --resizable --allow-highdpi`
* add function to determine logical coordinates of renderer point when given window point
* change since to the targeted milestone
* fix typo
* rename for consistency
* Change logical coordinate type to float, since we can render with floating point precision.
* add function to convert logical to window coordinates
* testwm2: use new SDL_RenderWindowToLogical
* SDL_render.c: alternate SDL_RenderWindowToLogical/SDL_RenderLogicalToWindow
Co-authored-by: John Blat <johnblat64@protonmail.com>
Co-authored-by: John Blat <47202511+johnblat64@users.noreply.github.com>
The joystick subsystem has complex precedence logic to deal multiple competing
backends like XInput, RawInput, and WGI. Let it fire the MaybeAdd callbacks
for joystick devices, since it knows which backend will end up managing them.
This resolves a situation where the RawInput joystick backend would take
control of an XInput device but the XInput haptic backend would still create
a haptic device. Since the XInput joystick backend didn't own the underlying
joystick device, we'd end up with an orphaned haptic device that didn't work
with SDL_HapticOpenFromJoystick() on the associated joystick device.
A racing reader could read from our fd between SDL_IOReady()/X11_Pending()
and our call to XNextEvent() which will cause XNextEvent() to block for
more data. Avoid this by using XCheckIfEvent() which will never block.
This also fixes a bug where we could poll() for data, even when events were
already read and pending in the queue. Unlike the Wayland implementation,
this isn't totally thread-safe because nothing prevents a racing reader
from reading events into the queue between our XCheckIfEvent() and
SDL_IOReady() calls, but I think this is the best we can do with Xlib.
This API and implementation comes from the Unreal Engine branch of SDL, which
originally called this "SDL_ConfineCursor".
Some minor cleanup and changes for consistency with the rest of SDL_video, but
there are two major changes:
1. The coordinate system has been changed so that `rect` is _window_ relative
and not _screen_ relative, making it easier to implement without having
global access to the display.
2. The UE version unset all rects when passing `NULL` as a parameter for
`window`, this has been removed as it was an unused feature anyhow.
Currently this is only implemented for X, but can be supported on Wayland and
Windows at minimum too.
This prevents conflicts with hidapi linked with applications, as well as allowing applications to make use of HIDAPI on Android and other platforms that might not normally have an implementation available.
Enabling the RawInput backend causes SDL_XINPUT_Enabled() to return false.
That causes WGI and DInput backends to take ownership of XInput-compatible
controllers, because they think there's no XInput-specific backend enabled.
In WGI's case, it will actually race with RawInput to open the device. By
properly excluding XInput devices from WGI, we can ensure that the sets of
devices managed by WGI and RawInput don't intersect. This makes the race
harmless, since they'll never both go after the same device.
The Xbox One driver stack doesn't propagate the VID/PID down to the
HID devices that end up in the GetRawInputDeviceList() output. This
means we end up matching against the wrong VID/PID and can't properly
exclude Xbox One controllers from WGI.
Fortunately, it is possible to walk back up the device tree to find
the parent with the matching VID/PID.
In this case we'll get WM_KILLFOCUS when the child window is focused, but we'll retain focus on the top level window, but when we Alt-Tab away, we won't get another WM_KILLFOCUS or WM_NCACTIVATE, we get WM_ACTIVATE instead, so we need to check for focus updates in response to that as well.
* SDL_OpenURL (macOS): try to open path if the url cannot be opened
* SDL_OpenURL (macOS): use CFURLCreateWithBytes & LSOpenCFURLRef to correctly escape input
* fix type casting + indentation
It's marked as being a public symbol internally, however, it was missing from the header files and not visible in the shared library. This adds it to the necessary headers and to the DynAPI list to expose it for use by applications.
Co-authored-by: Frank Praznik <frank.praznik@oh.rr.com>
Note that this removes the timeGetTime() fallback on Windows; it is a
32-bit counter and SDL2 should never choose to use it, as it only is needed
if QueryPerformanceCounter() isn't available, and QPC is _always_ available
on Windows XP and later.
OS/2 has a similar situation, but since it isn't clear to me that similar
promises can be made about DosTmrQueryTime() even in modern times, I decided
to leave the fallback in, with some heroic measures added to try to provide a
true 64-bit tick counter despite the 49-day wraparound. That approach can
migrate to Windows too, if we discover some truly broken install that doesn't
have QPC and still depends on timeGetTime().
Fixes#4870.
Add a new flag to avoid suppressing EINTR in SDL_IOReady(). Pass the
flag in WaitEventTimeout() to ensure that a SIGINT will wake up
SDL_WaitEvent() without another event coming in.
Even without the thread, it'll do an initial hardware detection at startup,
but there won't be any further hotplug events after that. But for many cases,
that is likely complete sufficient.
In either case, this cleaned up the code to no longer need a semaphore at
startup.
Fixes#4862.
We can have spurious wakeups in WaitEventTimeout() due to Wayland events
that don't end up causing us to generate an SDL event. Fortunately for us,
SDL_WaitEventTimeout_Device() handles this situation properly by calling
WaitEventTimeout() again with an adjusted timeout.
There are two issues which are stopping the SDL tests from building on
my machine:
- libunwind is not being linked
- Even if it is, it is missing several symbols.
The first is fixed by having the test programs link against libunwind if
available. Technically, SDL2_test should be linking against it, as it's
used in SDL_test_memory.c, but as SDL2_test is a static library, it
can't itself import libunwind. We just assume that if it's present on
the system, we should link it directly to the test programs. This should
strictly be an improvement, as the only case where this'd fail is if
SDL2 was compiled when libunwind was present, but the tests are being
compiled without it, and that'd fail anyway.
The second is fixed by #define-ing UNW_LOCAL_ONLY before including
libunwind.h: this is required to make libunwind link to predicatable
symbols, in what can only be described as a bit of a farce. There are a
few more details in the libunwind man page, but the gist of it is that
it disables support for "remote unwinding": unwinding stack frames in a
different process (and possibly from a different architecture?):
http://www.nongnu.org/libunwind/man/libunwind(3).html
Note that I haven't tried this with CMake: I suspect that it'll work,
though, as the CMakeLists.txt seems to have SDL2 link against libunwind if
it's present. This adds an ugly extra dependency to SDL2, but does mean
that issue 1 isn't present. The UNW_LOCAL_ONLY change shouldn't be
build-system-specific.
Wayland provides the prepare_read()/read_events() family of APIs for
reading from the display fd in a deadlock-free manner across multiple
threads in a multi-threaded application. Let's use those instead of
trying to roll our own solution using a mutex.
This fixes an issue where a call to SDL_GL_SwapWindow() doesn't swap
buffers if it happens to collide with SDL_PumpEvents() in the main
thread. It also allows coexistence with other code or toolkits in
our process that may want read and dispatch events themselves.
- Factorize PrepQueueCmdDraw{,DrawTexture,Solid) into one single function
- Change SDL_Texture/Renderer r,g,b,a Uint8 into an SDL_Color, so that it can be passed directly to RenderGeometry
- Don't automatically queue a SET_DRAW_COLOR cmd for RenderGeometry (and update GLES2 renderer)
Instead of taking a direct copy of the mouse cursor surface, and then
premultiplying on every BO upload (using the custom
legacy_alpha_premultiply_ARGB8888 function), use the new
SDL_PremultiplySurfaceAlphaToARGB8888() function, which converts a whole
surface at a time, once and save the result.
The already-premultiplied data is then copied from that to the BO on
each upload, adjusting for the stride (which the previous implementation
required to be equal to the width), thereby making the extra copy
slightly useful..
This also adds support for non-SDL_PIXELFORMAT_ARGB8888 surfaces.
It turns out that Wayland's WL_SHM_FORMAT_ARGB8888 format (and, indeed,
all wayland RGBA formats) should be treated as premultiplied. SDL
surfaces tend not to be premultiplied, and this is assumed by other
backends when dealing with cursors.
This change premultiplies the cursor surface in Wayland_CreateCursor()
using the new SDL_PremultiplySurfaceAlphaToARGB8888(). In so doing, it
also adds support for a wider range of input surfaces, including those
with non-ARGB8888 pixel formats, and those which don't have
pitch==width.
This should fix#4856
A number of video backends need to get ARGB8888 formatted surfaces with
premultiplied alpha, typically for mouse cursors. Add a new function to
do this, based loosely on legacy_alpha_premultiply_ARGB8888() from the
KMSDRM backend.
The new function, SDL_PremultiplySurfaceAlphaToARGB8888() takes two
arguments:
- src: an SDL_Surface to be converted.
- dst: a buffer which is filled with premultiplied ARGB8888 data of the
same size as the surface (assuming pitch = w).
This is not heavily optimised: it just repeatedly calls SDL_GetRGBA() to
do the conversion, but should do for now.
This fixes a specific issue seen on macOS 10.14.6 where a DELL E248WFP
Display connected to a 2014 Mac Mini with a scaled 1920x1080 resolution
selected and SDL_Init(SDL_INIT_VIDEO) failed with the error: "The video
driver did not add any displays".
The underlying cause was that the current 1080p display mode did not
have the flag kDisplayModeSafeFlag, the check for which was added in
a963e36, with the idea that certain display modes should not be
candidates for switching to in fullscreen exclusive mode. That may well
be the right thing to do for filtering down a list of candidate modes,
but it doesn't pay to be so picky about the current mode. After all,
this current mode was set by System Preferences, the picture does appear
correctly on screen, and other non-SDL based applications launch and run
correctly in this mode.
Therefore the fix is to have GetDisplayMode only filter out a mode based
on flags if it's part of a candidate list, but if it's the current mode
and it can possibly be converted to an SDL_DisplayMode, do so.
* Avoid unnecessary SDL_PumpEvents calls in SDL_WaitEventTimeout
* Add a sentinel event to avoid infinite poll loops
* Move SDL_POLLSENTINEL to new internal event category
* Tweak documentation to indicate SDL_PumpEvents isn't always called
* Avoid shadowing event variable
* Ignore poll sentinel if more (user) events have been added after
Co-authored-by: Sam Lantinga <slouken@libsdl.org>
Instead do an absolute elapsed time check since the start of the wait. If that is exceeded during any iteration the routine exits as the timeout has elapsed.
The observed behavior is that any nonzero timeout value would hang until the device was paused and resumed. And a zero timeout value would always return 0 frames written even when audio fragments could be heard. Making a manual timeout system unworkable.
None of the straightforward systems imply that there's a detectable problem before the call to AAudioStream_write(). And the callback set within AAudioStreamBuilder_setErrorCallback() does not get called as we enter the hang state.
I've found that AAudioStream_getTimestamp() will report an error state from another thread. So this change codifies that behavior a bit until a better fix or more root cause can be found.
Dispatching all events in Wayland_GLES_SwapWindow leads to resizes being
acked before the program has a chance to handle the resize. This change
reduces jumping on fullscreen transition with apps that call
SDL_PollEvent before issuing any render calls.
This has been better fixed by b28ed02 or another related relative mouse mode change of @slouken in SDL 2.0.17 and as such can be reverted to reduce unneeded processing in WM_MOUSEMOVE
wl_display_dispatch() will block if there are no events available, and
while we try to avoid this by using SDL_IOReady() to verify there are
events before calling it, there is a race condition between
SDL_IOReady() and wl_display_dispatch() if multiple threads are
involved.
This is made more likely by the fact that SDL_GL_SwapWindow() calls
wl_display_dispatch() if vsync is enabled, in order to wait for frame
events. Therefore any program which pumps events on a different thread
from SDL_GL_SwapWindow() could end up blocking in one or other of them
until another event arrives.
This change fixes this by wrapping wl_display_dispatch() in a new mutex,
which ensures only one thread can compete for wayland events at a time,
and hence the SDL_IOReady() check should successfully prevent either
from blocking.
Direct3D 9 dictates that caps.NumSimultaneousRTs must always be at least 1,
which is to say that Direct3D 9 level hardware must always support render
targets.
(caps.NumSimultaneousRTs is meant to show if you can draw to multiple render
targets in a single draw call.)
We had already hardcoded SDL_RENDERER_TARGETTEXTURE as available earlier in
the function anyhow.
Fixes#4781.
Some wayland compositors report the refresh rate as 0. Since we want to
force a minimum refresh rate of 10 frames worth, we were dividing by the
reported refresh rate, causing a divide-by-zero.
If the refresh rate is 0, instead force a frame every second if no frame
callbacks are received.
This fixes bug #4785
This will still happen occasionally as the mouse is whipped around, if there is a window overlapping the game window, but it should happen less often now. This could even happen with the original code that warped the mouse every frame, so this should be a good compromise where we don't warp the mouse continously and we still keep the mouse in the safe area of the game window.
Note that notifications can be any size, so the safe area may need to be adjusted or even dynamically defined via a hint.
We don't use it, it was a leftover from 1.2, I think, and it doesn't exist
on Solaris, so this should hopefully fix the build there.
This also means we don't need the configure/cmake checks for
SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY, so that was removed also.
Fixes#1666.
One place known to differ in a significant way is a single line segment that
starts and ends on the same point; the GL renderers will light up a single
pixel here, whereas the software renderer will not. My current belief is this
is a bug in the software renderer, based on the wording of the docs:
"SDL_RenderDrawLine() draws the line to include both end points."
You can see an example program that triggers that difference in Bug #2006.
As it stands, the GL renderers might _also_ render diagonal lines differently,
as the the Bresenham step might vary between implementations (one does three
pixels and then two, the other does two and then three, etc). But this patch
causes those lines to start and end on the correct pixel, and that's the best
we can do, and all anyone really needs here.
Not closing any bugs with this patch (yet!), but here are several that it
appears to fix. If no other corner cases pop up, we'll call this done.
Reference Bug #2006.
Reference Bug #1626.
Reference Bug #4001.
...and probably others...
Vista and later provide the SleepConditionVariableCS() function for this.
Since SDL_syscond_srw.c doesn't require SRW locks anymore, rename it to
SDL_syscond_cv.c which better reflects the implementation of condition
variables rather than the implementation of mutexes.
Fixes#4051.
* Fixed: Whitespace being striped from the end of IME strings incorrectly
* Fixed: Google IME Candidate Window not placing correctly
* Why are PostBuild events stored in the vcxproj and not a user file?
* Revert SDL.vcxproj properly...
* Remove whitespace as per code review
* Fix Werror=declaration-after-statement error in code
In the future, we might want to support special swap intervals. To
prevent applications from expecting nonzero values of vsync to be the
same as "on", fail with SDL_Unsupported() if the value passed is neither
0 nor 1.
Currently, if an application wants to toggle VSync, they'd have to tear
down the renderer and recreate it. This patch fixes that by letting
applications call SDL_RenderSetVSync().
This is the same as the patch in #3673, except it applies to all
renderers (including PSP, even thought it seems that the VSync flag is
disabled for that renderer). Furthermore, the renderer flags also change
as well, which #3673 didn't do. It is also an API instead of using hint
callbacks (which could be potentially dangerous).
Closes#3673.
See SDL bug #4703. This implements two new hints:
- SDL_APP_NAME
- SDL_SCREENSAVER_INHIBIT_ACTIVITY_NAME
The former is the successor to SDL_HINT_AUDIO_DEVICE_APP_NAME, and acts
as a generic "application name" used both by audio drivers and DBUS
screensaver inhibition. If SDL_AUDIO_DEVICE_APP_NAME is set, it will
still take priority over SDL_APP_NAME.
The second allows the "activity name" used by
org.freedesktop.ScreenSavver's Inhibit method, which are often shown in
the UI as the reason the screensaver (and/or suspend/other
power-managment features) are disabled.
The recent change to make SDL_AUDIODRIVER support comma-separated lists
broke the previous behavior where an SDL_AUDIODRIVER that was empty
behaved the same as if it was not set at all. This old behavior was
necessary to paper over differences in platforms where SDL_setenv may
or may not actually delete the env var if an empty string is specified.
This patch just adds a simple check to ensure SDL_AUDIODRIVER is not
empty before using it, restoring the old interpretation of the empty
var.
Originally, SDL 1.2 used "pulse" as the name for its PulseAudio driver.
While it now supports "pulseaudio" as well for compatibility with SDL
2.0 [1], there are still scripts and distro packages which set
SDL_AUDIODRIVER=pulse [2]. While it's possible to remove this in most
circumstances or replace it with "pulseaudio" or a comma-separated list,
this may still conflict if the environment variable is set globally and
old binary builds of SDL 1.2 (e.g. packaged with older games) are being
used.
To fix this on SDL 2.0, add a hardcoded check for "pulse" as an audio
driver name, and replace it with "pulseaudio". This mimics what SDL 1.2
does (but in reverse). Note that setting driver_attempt{,_len} is safe
here as they're reset correctly based on driver_attempt_end on the next
loop.
[1] d951409784
[2] https://bugzilla.opensuse.org/show_bug.cgi?id=1189778
This change corrects the mappings for the Atari gamecontroller and
adds support for the Atari Xbox 360 compatible gamecontroller. The Atari
game controller can switch between Atari and Xbox 360 mappings.
This might have changed at some point in the Pulse API, or this might have
always been wrong, but we didn't notice because the dynamic loading code
hides it by casting things to void *. The static path, where it
assigns the function pointer directly, puts out a clear compiler warning,
though.
With Dear ImGui + software renderer, it draws:
- by default at 250 fps
- drops to 70 fps if you show the color picker
- drops to 10 fps if put the color picker fullscreen
There were a few places throughout the SDL code where values were
clamped using SDL_min() and SDL_max(). Now that we have an SDL_clamp()
macro, use this instead.
This was the original intent (note SDL_UpdateWindowGrab() in SDL_OnWindowFocusGained() and SDL_OnWindowFocusLost()) and fixes a bug where relative motion unexpectedly stops if the task bar is covering the bottom of the game window and the mouse happens to move over it while relative mode is enabled.
Another alternative would be to confine the mouse when relative mode is enabled, but that generates mouse motion which would need to be ignored, and it's possible for the user moving the mouse to combine with the mouse moving into the confined area so you can't easily tell whether to ignore the mouse motion. See https://github.com/libsdl-org/SDL/issues/4165 for a case where this is problematic.
This is the mouse focus except in the case where relative motion is enabled and the mouse is over a window floating on top of the application window (e.g. the taskbar)
This fixes restoring the cursor clip rectangle after the mouse has moved off of the window.
Also try to better synchronize cursor visibility with mouse position changes when changing relative mode. This doesn't work perfectly, but it seems to improve things on Windows.
Don't rely on checking __clang_major__ since it is not comparable
between different vendors. Don't use "#pragma clang attribute" since it
is only available in relatively recent versions, there's no obvious way
to check if it's supported, and just using __attribute__ directly (for
gcc as well) results in simpler code anyway.
If we are already in the desired mode, changing it is a no-op at best,
and harmful at worst: on Xwayland, it sometimes happens that we disable
the crtc and cannot re-enable it.
Resolves: https://github.com/libsdl-org/SDL/issues/4630
Signed-off-by: Simon McVittie <smcv@collabora.com>
- cmake, configure (CheckDLOPEN): --enable-sdl-dlopen is now history..
detach the dl api discovery from SDL_LOADSO_DLOPEN functionality.
define HAVE_DLOPEN. also define DYNAPI_NEEDS_DLOPEN (CheckDLOPEN is
called only for relevant platforms.)
- update SDL_config.in and SDL_config.cmake accordingly.
- SDL_dynapi.h: set SDL_DYNAMIC_API to 0 if DYNAPI_NEEDS_DLOPEN is
defined, but HAVE_DLOPEN is not.
- pthread/SDL_systhread.c: conditionalize dl api use to HAVE_DLOPEN
- SDL_x11opengl.c, SDL_DirectFB_opengl.c, SDL_naclopengles.c: rely
on HAVE_DLOPEN, not SDL_LOADSO_DLOPEN.
- SDL_config_android.h, SDL_config_iphoneos.h, SDL_config_macosx.h,
SDL_config_pandora.h, and SDL_config_wiz.h: define HAVE_DLOPEN.
Closes: https://github.com/libsdl-org/SDL/pull/4351
Without this change, driver names don't get matched correctly;
for example "a" can get matched with "alsa" since it only checks
whether the string matches up to the length of the requested
driver name.
Without this change, driver names don't get matched correctly;
for example "x" can get matched with "x11" since it only checks
whether the string matches up to the length of the requested
driver name.
b08b1bde introduced a subtle bug. Despite not using D-Bus types directly,
the code used the SDL_USE_LIBDBUS definition set by SDL_dbus.h to conditionally
compile calls SDL_DBus_ScreensaverTickle() and SDL_DBus_ScreensaverInhibit().
As a result, it still compiled without SDL_dbus.h included, but screensaver
suspension silently failed to work.
The D-Bus stuff could probably use some tweaks to be harder to accidentally
break, but for now just restore the header includes.
Configure events from compositors have an extremely annoying habit of giving us
completely bogus sizes, from all sorts of places. Thankfully, the protocol
gives us the ability to completely ignore the width/height and just stick with
what we know, so for all windows that are not meant to be resized, pretend we
never even got the width/height at all, the compositor is required to respect
our dimensions whether they match configure's suggestion or not.
Otherwise only the display resolution is changed, but the SDL window size
(and for example the window-surface size) aren't adjusted accordingly
and thus don't fill the whole screen.
See #3313
.. and maybe other platforms as well (though X11 was not affected)?
The issue was that passing a higher resolution than the current desktop
resolution to SDL_CreateWindow() with SDL_WINDOW_FULLSCREEN didn't switch
to that resolution (even though it did switch to lower resolutions).
When creating a fullscreen window, window->fullscreen wasn't even set
at all (only zeroed out), setting it only happened if the user explicitly
called SDL_SetWindowDisplayMode(). So without that, SDL_CreateWindow()
-> SDL_UpdateFullscreenMode() -> SDL_GetWindowDisplayMode() used the
resolution from window->windowed.w/h which were limited to the desktop size
due to some weird combination of WIN_AdjustWindowRectWithStyle() and
WIN_WindowProc() being called after a call to SetWindowPos().
fixes#3313
This prevents a race if two threads that need d-bus try to init it at the
same time. Note that SDL_Init will likely handle this from a single thread
at startup, but there are places outside of init where one might trigger
D-Bus init, like setting thread priority (a common first thing for a new
thread to do) resulting in SDL trying to use RTKit.
Fixes#4587.
This reintroduces the fix from 0e16ee8330, but just marks
the viewport state as dirty after a clear that needs to expand the
viewport to fill the render target, as we'll need to also reset
the orthographic projection state elsewhere, and that won't
happen if we clear the dirty flag here.
Fixes#4210.
(again.)
(...sorry...!)
The Renderer logical scaling code scales mouse coordinates, and needs to
take the window DPI into account on HIGHDPI windows. However, the
variable which tracks this, renderer->dpi_scale, is set once when the
renderer is created, and then not updated. In the event that the window
is moved to another screen, or the screen DPI otherwise changes, this
will be outdates, and potentially the coordinates will be all wrong.
So let's update the dpi_scale on the SIZE_CHANGED event: it's at least a
possibility that this will be issued on some OSes when DPI changes, and
it's otherwise already handled by SDL_Renderer's event filter.
Otherwise you might have set the viewport to the full size of
the render target in SDL's API but this change hasn't been
transmitted to Direct3D yet by the time we attempt to clear.
Fixes#4210.
SDL_AddHintCallback() uses SDL_malloc(), which means this would
run before main(), so the app wouldn't be able to supply its own
replacement SDL_malloc() implementation in time.
This code was moved to under SDL_Init. Since the hint callback
already makes efforts to not override the app manifest's
orientation settings, this is safe to move until after pre-main()
startup.
Fixes#4449.
This removes the CM_Register_Notification code on WinRT. Note
that this API _is_ available to UWP apps as of Windows 10.0.17763
(version 1809, released October 2018), according to:
https://docs.microsoft.com/en-us/uwp/win32-and-com/win32-apis#apis-from-api-ms-win-devices-config-l1-1-1dll
So it might be worth readding with some sort of preprocessor check
for minimum targeted version, or whatever is appropriate for WinRT
development.
This was causing configure events to not inform SDL of window size
changes, even when they were based on resizes that we fully expected. The
result was fullscreen->windowed not working at all, because it would
retain the desktop resolution instead of reverting to the floating size
that it had before moving to fullscreen mode.
Fixes Super Hexagon fullscreen toggling.
The flush has been removed in e5f9fae034.
Unfortunately, even though ideally the flush shouldn't be necessary,
our resize sequence isn't... well, perfect, and removing that flush causes
tons of troubles.
We're also still flushing in other paths where the window size can be
changed by the compositor and where we may potentially have to obey that
change, like in Wayland_MaximizeWindow.
This also removes the hack introduced in 7f261d3b76,
which introduces problems with protocol violations and seems to not be
necessary when flushing.
We have issues with correct resize sequence and happen to commit old-sized
buffers even after configure event for the new size has been already
acknowledged. While the reason for that stays unknown, let's at least
workaround the problem by faking window geometry into expected size.
This does not fix visual glitch on e.g. fullscreen toggling, but having
a split-second glitch is still a much better outcome than being
terminated by the compositor for protocol violation.
This was causing window changes to completely break, resulting in broken
decorations and bizarre frame timing, I don't know what exactly it's doing
but it's not good. Kept the libdecor_frame_is_floating logic, at least.
Commit 871c11191b removed delayed
resize handling, but it left the whole structure untouched that
now became unnecessary. To help with code clarity, get rid
of the structure where pending resize state used to be stored
and pass all the data directly to Wayland_HandlePendingResize
(now renamed to Wayland_HandleResize, since it's not "pending"
anymore but applied immediately)
Otherwise our windows have no window decoration on compositors that
support xdg-decoration-unstable-v1, but default to client-side mode.
Contrary to what the comment was stating, there is nothing in the protocol
that would make redundant calls to zxdg_toplevel_decoration_v1::set_mode
problematic.
Some Wayland compositors send (0,0) as "suggested" configure event sizes to
indicate that the client has to decide on its own which sizes to used. This
is commonly done when restoring from maximised, fullscreen or tiles states
to fullscreen.
We now store the last known floating states in a new set of variables and
restore them when we receive such a (0,0) configure event.
From the vfork manpage:
> The vfork() function has the same effect as fork(2), except that
> the behavior is undefined if the process created by vfork() either
> modifies any data other than a variable of type pid_t used to store
> the return value from vfork(), or returns from the function in which
> vfork() was called, or calls any other function before successfully
> calling _exit(2) or one of the exec(3) family of functions.
unsetenv is still called inside a child process, so it does not
influence the rest of the application.
This fixes a crash on pressing keyboard button when compositor sends
zero as repeat rate, indicating that key repeat should be disabled.
From Wayland protocol spec:
> Negative values for either rate or delay are illegal. A rate of zero
> will disable any repeating (regardless of the value of delay).
This is a workaround and not a proper fix, but this is possibly complicated,
and possibly a corner case, so this will do for 2.0.16, if not the
foreseeable future.
Reference issue #4561
When we removed the OpenGL resize workaround it introduced a problem for
fullscreen windows in particular: When leaving fullscreen we tried to send a
resize event, but UpdateFullscreenMode would send a SIZE_CHANGED immediately
after, deleting our resize event and causing the following configure event's
resize to be ignored. This timing issue resulted in fullscreen windows not
being resized at all when becoming a floating window.
By always forcing resize events from configure events, we ensure that RESIZED
always makes it through. SetWindowSize-type changes should be unaffected as
they do not fire configure events.
The RenderDrawLinesWithRects and RenderDrawLinesWithRectsF functions can
sometimes call QueueCmdFillRects() with the data pointed to by frects
uninitialised. This can occur if none of the lines can be replaced with
rects, in which case the frects array is empty, and nrects is 0.
gcc 10.3.0 will detect this possibility, and print a warning like:
/home/david/Development/SDL/src/render/SDL_render.c: In function 'RenderDrawLinesWithRectsF':
/home/david/Development/SDL/src/render/SDL_render.c:2725:15: warning: '<unknown>' may be used uninitialized [-Wmaybe-uninitialized]
2725 | retval += QueueCmdFillRects(renderer, frects, nrects);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/david/Development/SDL/src/render/SDL_render.c:499:1: note: by argument 2 of type 'const SDL_FRect *' to 'QueueCmdFillRects' declared here
499 | QueueCmdFillRects(SDL_Renderer *renderer, const SDL_FRect * rects, const int count)
| ^~~~~~~~~~~~~~~~~
This is harmless, because when this is uninitialised, nrects is always
0, so QueueCmdFillRects() does nothing anyway. We therefore can work
around this by only calling QueueCmdFillRects() when nrects is nonzero.
Somewhat impressively, gcc recognises that this is now safe.
This is needed to support CHERI, and thus Arm's experimental Morello
prototype, where pointers are implemented using unforgeable capabilities
that include bounds and permissions metadata to provide fine-grained
spatial and referential memory safety, as well as revocation by sweeping
memory to provide heap temporal memory safety.
The C standard does not guarantee that if two pointers compare equal
they are the same pointer, as C pointers have a notion of provenance,
and compilers have been known to exploit this during optimisation. For
CHERI, this becomes even more important, as in-place expansion can
result in realloc returning a capability to the same address but with
increased capability bounds, and so reusing the old capability will trap
trying to access outside the bounds of the original allocation.
In the case that ptr == mem, memdiff and ptrdiff should still be equal,
so the only overhead is a small amount of pointer arithmetic and a store
of the new pointer (which is required per the C standard in order to not
be undefined behaviour when next loaded).
This also fixes the calculation of oldmem to use uintptr_t rather than
size_t as casting the pointer to size_t on CHERI will strip the
capability metadata, including the validity tag, with the subsequent
cast back to void * resulting in a null-derived capability whose
validity tag is clear and thus cannot be dereferenced without trapping.
This is needed to support CHERI, and thus Arm's experimental Morello
prototype, where pointers are implemented using unforgeable capabilities
that include bounds and permissions metadata to provide fine-grained
spatial and referential memory safety, as well as revocation by sweeping
memory to provide heap temporal memory safety.
On most systems (anything with a flat memory hierarchy rather than using
segment-based addressing), size_t and uintptr_t are the same type.
However, on CHERI, size_t is just an integer offset, whereas uintptr_t
is still a capability as described above. Casting a pointer to size_t
will strip the metadata and validity tag, and casting from size_t to a
pointer will result in a null-derived capability whose validity tag is
not set, and thus cannot be dereferenced without faulting.
The audio and cursor casts were harmless as they intend to stuff an
integer into a pointer, but using uintptr_t is the idiomatic way to do
that and silences our compiler warnings (which our build tool makes
fatal by default as they often indicate real problems). The iconv and
egl casts were true positives as SDL_iconv_t and iconv_t are pointer
types, as is NativeDisplayType on most OSes, so this would have trapped
at run time when using the round-tripped pointers. The gles2 casts were
also harmless; the OpenGL API defines this argument to be a pointer type
(and uses the argument name "pointer"), but it in fact represents an
integer offset, so like audio and cursor the additional idiomatic cast
is needed to silence the warning.
When choosing an X11 Visual for a window based on its GLX capabilities, first
try glXChooseFBConfig (if available) before falling back to glXChooseVisual.
This normally does not make a difference because most GLX drivers create a
Visual for every GLXFBConfig, exposing all of the same capabilities.
For GLX render offload configurations (also know as "PRIME") where one GPU is
providing GLX rendering support for windows on an X screen running on a
different GPU, the GPU doing the offloading needs to use the Visuals that were
created by the host GPU's driver rather than being able to add its own. This
means that there may be fewer Visuals available for all of the GLXFBConfigs the
guest driver wants to expose. In order to handle that situation, the NVIDIA GLX
driver creates many GLXFBConfigs that map to the same Visual when running in a
render offload configuration.
This can result in a glXChooseVisual request failing to find a supported Visual
when there is a GLXFBConfig for that configuration that would have worked. For
example, when the game "Unnamed SDVX Clone" [1] tries to create a configuration
with multisample, glXChooseVisual fails because the Visual assigned to the
multisample GLXFBConfigs is shared with the GLXFBConfigs without multisample.
Avoid this problem by using glXChooseFBConfig, when available, to find a
GLXFBConfig with the requested capabilities and then using
glXGetVisualFromFBConfig to find the corresponding X11 Visual. This allows the
game to run, although it doesn't make me any better at actually playing it...
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Fixes: https://forums.developer.nvidia.com/t/prime-run-cannot-create-window-x-glxcreatecontext/180214
[1] https://github.com/Drewol/unnamed-sdvx-clone
As of [1], SDL now compiles with a warning in SDL_waylandevents.c on
32-bit systems under gcc 10.3.0:
/tmp/SDL/src/video/wayland/SDL_waylandevents.c: In function 'seat_handle_capabilities':
/tmp/SDL/src/video/wayland/SDL_waylandevents.c:958:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
958 | SDL_AddTouch((SDL_TouchID)seat, SDL_TOUCH_DEVICE_DIRECT, "wayland_touch");
| ^
/tmp/SDL/src/video/wayland/SDL_waylandevents.c:964:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
964 | SDL_DelTouch((SDL_TouchID)seat);
| ^
This is due to SDL_TouchID always being 32-bit, but seat being a pointer
which is (obviously) only 32-bit on 32-bit systems. The conversion is
therefore harmless, so silence it with an extra cast via intptr_t.
This is what the cocoa backend does (and is similar to what the Win32
backend does, except with size_t).
Fixes: 03c19efbd1 ("Added support for multiple seats with touch input on Wayland")
[1]: 03c19efbd1
When wayland is not dynamically loaded (--enable-wayland-shared=no)
libdecor.h is not included unless SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC
is set, so it fails to build. We can't simply move the libdecor.h
include above the #ifdef SDL_VIDEO_DRIVER_WAYLAND_DYNAMIC block, as
libdecor.h itself #includes wayland headers we need to replace with
#defines. Instead, duplicate the #include.
Fixes https://github.com/libsdl-org/SDL/issues/4543
Note that this doesn't fix any of the underlying issues of libdecor
being treated as part of wayland, it just fixes the build. A better
solution would probably be to decouple the wayland dynamic loading
from the libdecor dynamic loading completely, though that is a lot
more work...
Each window can have at most one zxdg toplevel decoration, but as of
[1], we accidentally create two. (If libdecor is not in use). This
causes wayland windows with server-side decorations (e.g. on KDE/KWin)
to crash with the message:
zxdg_decoration_manager_v1@7: error 1: decoration has been already constructed
This extra zxdg_decoration_manager_v1.get_toplevel_decoration() call was
introduced while deprecating wl-shell and xdg-shell-stable[1] support,
and possibly was a bad interaction with [2], which moved the decoration
creation around.
Fixes: 6aae5b44f8 ("Remove wl-shell and xdg-shell-unstable-v6 support (#4323)")
[1]: https://github.com/libsdl-org/SDL/pull/4323
[2]: https://github.com/libsdl-org/SDL/pull/4374
WASAPI_WaitDevice is used for audio playback and capture, but needs to
behave slighty different.
For playback `GetCurrentPadding` returns the padding which is already
queued, so WaitDevice should return when buffer length falls below the
buffer threshold (`maxpadding`).
For capture `GetCurrentPadding` returns the available data which can be
read, so WaitDevice can return as soon as any data is available.
In the old implementation WaitDevice could suddenly hang. This is
because on many capture devices the buffer (`padding`) wasn't filled
fast enough to surpass `maxpadding`. But if at one point (due to unlucky
timing) more than maxpadding frames were available, WaitDevice would not
return anymore.
Issue #3234 is probably related to this.
On modern CPUs, there's no penalty for using the unaligned instruction on
aligned memory, but now it can vectorize unaligned data too, which even if
it's not optimal, is still going to be faster than the scalar fallback.
Fixes#4532.
The Game Controller Kit doesn't show the controllers at startup, so the HIDAPI driver sees them first and therefore gets preference when a controller is supported by both drivers.
This fixes bug https://github.com/libsdl-org/SDL/issues/4209
This prevents an assertion whem LINUX_JoystickGetGamepadMapping tried to
open the stick temporarily and messed with global state by doing so. Now
the global state is only set in LINUX_JoystickOpen, but the common code
is shared by both interfaces.
Fixes#4198.
Zach Reedy
Guus Waals
Ozkan Sezer
Zach Reedy
Charlie Birks
Cameron Gutman
Jo Bates
Sam Lantinga
pionere
Sylvain
Mahyar Koshkouei
Cameron Cawley
Phillip Stephens
Ryan C. Gordon
Wohlstand
Cacodemon345
Wouter Wijsman
Frank Praznik
waddlesplash
Joshua Ashton
Temdog007
SonicMastr
Weng Xuetian
Vitaliy Zhmurikov
Ivan Epifanov
Ethan Lee
ulatekh
Charlie Birks
Carl Glave
Mathieu Eyraud
kenmays
Joan Bruguera
stdgregwar
Francisco Javier Trujillo Mata
rohlem
e
shinyquagsire23
Edward Li
Alex Szpakowski
Erik Soma
thfrwn
David Redondo
David Gow
Hanseul Jun
Valentin Hăloiu
Sergio Padrino
ALittleDruid
Davis Mosenkovs
Fredrick Brennan
Eric Wasylishen
DarkContact
Zack Middleton
Misa
Susko3
Yufei Huang
Thomas Ballinger
Patrick Hogan
Kevin Colour
superzazu
Brick
Northfear
Tanuj Bagaria
uyjulian
James Howard
DomGries
shaquan-omari
Rémy Tassoux
Väinö Mäkelä
Martin Mauersics
pkubaj
Alex R
Rokas Kupstys
Lee Salzman
Vanfanel
Eric Engestrom
Shawn Ellis
Oschowa
Aleksey Rybalkin
Jānis Rūcis
Joseph Kogut
Joshua Root
Simon McVittie
Andrei Alexeyev
hgs3
Sebastian Krzyszkowiak
Daniel Gibson
Christian Rauch
Jessica Clarke
Aaron Plattner
Adam
Simon Zeni
Splamy
Luis Cáceres
Narr the Reg
Joel Linn